C-PRODUCT-CBR-V35-MIB Table View

This object contains the CBR's V.35 specific port Configuration table.
There is one cbrV35PortConfEntry associated for each provisioned
CBR port interface within the shelf.  This table uses portSlot and
portNumber as an index which is defined in the portBaseTable of the
C-PRODUCT BASE MIB. This index value uniquely identifies the CBR port
interface to which this entry is applicable.

cbrV35PortConfEntry row .0.0.1.1.15.5.1.1

An entry in the CBR specific port Configuration table.

Indexes

C-PRODUCT-BASE-MIBportSlot C-PRODUCT-BASE-MIBportNumber

Column	Syntax	OID
cbrV35PortConfCableTypemandatory This object indicates the type of cable connected to the port. An error is returned if an access is attempted on a physical interface other than a V.35 port interface. The default value is none (1).	Enumeration Enumerated Values: 1 none 2 dte 3 dce	.0.0.1.1.15.5.1.1.1
cbrV35PortConfScrClockSourcemandatory This object indicates the SCR clock source. This is aplicable for both DCE & DTE cable types. If the cable type is 'none', a get request returns whatever the value currently stored in the managed node for this port and…	Enumerationr/w Enumerated Values: 1 internal 2 adaptive	.0.0.1.1.15.5.1.1.2
cbrV35PortConfTxClockPhasemandatory This object indicates the type of Transmit clock phase needed to correct the clock out of phase problem. This is aplicable ONLY when a 'dte' cable is connected to the port. The default value is normal (1).	Enumerationr/w Enumerated Values: 1 normal 2 inverted	.0.0.1.1.15.5.1.1.3
cbrV35PortConfRtsmandatory This object indicates RTS pin status. Default value is off (1).	Enumeration Enumerated Values: 1 off 2 on	.0.0.1.1.15.5.1.1.4
cbrV35PortConfCtsmandatory This object indicates CTS pin status. Default value is off (1).	Enumeration Enumerated Values: 1 off 2 on	.0.0.1.1.15.5.1.1.5
cbrV35PortConfDcdmandatory This object indicates DCD pin status. Default value is off (1).	Enumeration Enumerated Values: 1 off 2 on	.0.0.1.1.15.5.1.1.6
cbrV35PortConfDsrmandatory This object indicates DSR pin status. Default value is off (1).	Enumeration Enumerated Values: 1 off 2 on	.0.0.1.1.15.5.1.1.7
cbrV35PortConfSctClockSourcemandatory This object indicates the type of SCT clock source. This is aplicable for both 'DCE' & 'DTE' cable types. If no cable is attached then it just reflects the value stored in the database. The default value is internal (…	Enumerationr/w Enumerated Values: 1 recovered 2 internal	.0.0.1.1.15.5.1.1.8
cbrV35PortConfRxTimingSourcemandatory This object indicates the Serial interface Recieive Timing Source. The default value is dce-transmit-clock.	Enumerationr/w Enumerated Values: 1 echo-clock-from-dte 2 dce-transmit-clock	.0.0.1.1.15.5.1.1.9
cbrV35PortConfCableIDmandatory This object indicates the type of physical interface.	Enumeration Enumerated Values: 1 none 2 v35 3 rs422	.0.0.1.1.15.5.1.1.10
cbrV35PortConfLoopBackTypemandatory This object indicates the type of loopback configured for the specified T1/E1 port interface. Network-line (2) redirects incoming remote traffic back into the network interface at the external edge of the card interface…	Enumerationr/w Enumerated Values: 1 no-loopback 3 local-card 4 network-card 5 no-response	.0.0.1.1.15.5.1.1.11