BUNDLE-MIB Table View

Bundle management related 
parameters are defined in this table.

nnbundleTableEntry row .1.3.6.1.4.1.562.73.1.1.1.13.1.1

Bundle parameter entries are listed in this
table.

Indexes

nnbundleId

Column	Syntax	OID
nnbundleId bundleId is the identifier of a bundle. To configure a bundle, this parameter must be used as the index. This is assigned internally by the system. Whenever a row creation needs to occur in the bundleTable, the bun…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.1
nnbundleName Name of the bundle. To configure a bundle, this parameter must be set. That is, a descriptive name should be given to a bundle. The maximum length of a bundle name is 8 characters. This parameter is set once during …	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.2
nnbundleContact Name of the person who can be contacted for information about the bundle. The maximum length for this parameter is 15 characters. This parameter can be set after the bundle is named and before the links are assigned.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.3
nnbundleDescr Brief description of the bundle. The maximum length of this parameter is 25 characters. This parameter can be set after the bundle is named and before the links are assigned.	OctetStringr/w Constraints: range: 1-76	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.4
nnbundleEncapsulation Specifies the type of protocol encapsulation for the bundle. To configure protocol-specific parameters for a bundle, the bundle must first be encapsulated with that protocol. To unconfigure the encapsulation type, t…	Enumerationr/w Enumerated Values: 1 noEncap 2 ppp 3 hdlc 4 frameRelay	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.5
nnbundleDropEs The length of time in seconds that the error condition Errored Seconds exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.6
nnbundleDropSes The length of time in seconds that the error condition Severely Errored Seconds exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.7
nnbundleDropUas The length of time in seconds that the error condition Unavailable Seconds exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.8
nnbundleDropEev The length of time in seconds that the error condition ESF Error Events exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.9
nnbundleDropBes The length of time in seconds that the error condition Bursty Errored Seconds (Applicable only for T1 links) exists before a link is dropped. This parameter can be configured only for multilink bundles and after th…	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.10
nnbundleDropBbe The length of time in seconds that the error condition Threshold for Background Blocked Errors (Applicable only for E1 links) exists before a link is dropped. This parameter can be configured only for multilink bund…	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.11
nnbundleDropLofc The length of time in seconds that the error condition Loss Of Frame Count exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.12
nnbundleDropBpv The length of time in seconds that the error condition BiPolar Violation exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.13
nnbundleDropCss The length of time in seconds that the error condition Controlled Slip Second exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.14
nnbundleDropOof The length of time in seconds that the error condition Out Of Frame exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.15
nnbundleDropCrc The length of time in seconds that the error condition Cyclic Redundancy Check exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.16
nnbundleIpAddr The bundle's source IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured only when the bundle is encapsulated. Also the parameters bundleIpAddr …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.17
nnbundleSubnetMask This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter is set along with the bundleIpAddr parameter during the same r…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.18
nnbundleSrcForwardingAddrPrimary The bundle's destination IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured when the bundle has been configured for IP multiplexing. To unconf…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.19
nnbundleSrcForwardingAddrSecondary The bundle's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interface and failover is enabled on that interface and the interface goes down. The second…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.20
nnbundleRestoreMethod bundleRestoreMethod defines how a dropped link of a multilink bundle will be restored. It can be done either manually or automatically. If the restore mode is automatic, the parameter bundleLinkRestoralTime should …	Enumerationr/w Enumerated Values: 1 manual 2 automatic	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.21
nnbundleLinkRestoralTime Error-free time interval (in seconds) that must pass before a link is automatically restored. This parameter can be set when the bundleRestoreMethod is automatic.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.22
nnbundleStatus bundleStatus shutdowns the bundle. Although the default is 'enable,' the bundle remains disabled until all necessary parameters are present	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.23
nnbundleLinkRestore bundleLinkRestore specifies the links to be restored manually. This parameter is configured when the value of bundleRestoreMethod is manual. The user needs to specify the link/s to be restored. LSB in the OCTET STRI…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.24
nnbundleNoOfLinks Indicates the number of links configured in the bundle.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.25
nnbundleTotalBw Indicates the total bandwidth for this bundle. The bundle bandwidth is the aggregated band- widths of all the links assigned to a particular bundle.	kbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.26
nnbundleRowStatus bundleRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating a bundle or deleting a bundle. In order to add a row to the bundle table, a set on this parameter should be …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.27
nnbundleIpUnnumbered Name of the bundle. To configure unnumbered, this parameter must be set. The maximum length of a bundle name is 8 characters.	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.28
nnbundleIpMulticast Specifies the Ip multicast operation.	Enumerationr/w Enumerated Values: 0 noMcast 1 pass 2 block 3 ospfrip2	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.29
nnbundleDirectedBcast Enable/disable forwarding of directed broadcasts on this interface.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.30
nnbundleIcmpUnreachable Enable/disable ICMP destination unreachable messages on this interface	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.31
nnbundleIcmpRedirect Enable/disable ICMP redirect messages on this on this interface	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.32
nnbundleClearCounters Perform a clearing of the counters operation	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.33
nnbundleTrackHoldDownTimer Indicates the tracking hold down timer.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.34
nnbundleDropPackets The number of packets dropped by a WAN interface when the agent encounters packet drops due to lack of buffer availability for transmission etc. Also, packets may be dropped for various reasons like Buffer ove…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.562.73.1.1.1.13.1.1.35

All the parameters related to the assigned 
links of a bundle are defined in 
bundleLinkTable. A row in this table can be 
created when a bundle with the corresponding 
bundleId already exists in the bundleTable.

nnbundleLinkEntry row .1.3.6.1.4.1.562.73.1.1.1.13.2.1

Link parameters that relate to a
given bundle are specified in this table.

Indexes

nnbundleId nnbundleLinkT1Num

Column	Syntax	OID
nnbundleLinkT1Num bundleLinkT1Num is the number of the T1 link being added to a specific bundle. For example, to assign link number 4, the value of this parameter should be set to 4. However, the design of SNMP's link creation is dif…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.1
nnbundleLinkTimeSlots bundleLinkTimeSlots indicates the DS0 channels in a fractional T1 link. The LSB in the OCTET STRING represents DS0 channel number 1. For example, to assign DS0 channels 1-4, the value of this parameter should be set…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.2
nnbundleLinkType bundleLinkType specifies the interface type (i.e.,CT3,T1,T3,HSSI,V35,X21,S530,S530A,S449,S232 etc.,) of the link being assigned to the bundle. This is a mandatory parameter for Row creation in the bundleLinkTable.	Enumerationr/w Enumerated Values: 1 ct3 2 t1 3 e1 4 hssi 5 t3 6 v35 7 ft1 8 fe1 9 x21 10 s530 11 s530A 12 s449 13 s232	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.3
nnbundleLinkSpeed The bundleLinkSpeed specifies the transmission speed of all DS0 channels in a bundle.	Enumerationr/w Enumerated Values: 1 kbps56 2 kbps64 3 notApplicable	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.4
nnbundleLinkInvertedData Setting bundleLinkInvertedData parameter to true will have the system invert data on all DS0 channels before transmission. Data inversion is used only for HDLC-encapsulated bundles.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.5
nnbundleLinkPhysIfNum bundleLinkPhysIfNum specifies the interface number of the interface type such as CT3, HSSI, T3 on which this link is being created. This variable holds significance only for link types CT3, HSSI and T3. It is a mand…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.6
nnbundleLinkDiffDelay bundleLinkDiffDelay specifies the maximum differential delay allowed on the links in a multilink bundle. If the packet delay on any link exceeds the differential delay set for a bundle, that link is dropped from th…	milli-secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.7
nnbundleLinkBw bundleLinkBw indicates the bandwidth of the link. The bandwidth of an individual link depends upon its configuration. For example, in a link of type T1, its bandwidth will depend upon whether the link is a full T1…	kbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.8
nnbundleLinkStatus bundleLinkStatus indicates whether a particular link in a bundle is up or down. The link can go down due to various reasons such as differential delay, a broken link, or negotiation problems at the far end.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.9
nnbundleLinkRowStatus bundleLinkRowStatus is used to add or delete a row in the table. To create a row, this parameter is set to value 4(createAndGo). To delete a row, this parameter is set to a value 6(destroy).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.562.73.1.1.1.13.2.1.10

All the parameters related to bundle
tracking are includede in BundleTrackTable.

nnbundleTrackEntry row .1.3.6.1.4.1.562.73.1.1.1.13.3.1

Bundle Track parameters that relate to a
given bundle are specified in this table.

Indexes

nnbundleId nntrackIntfId

Column	Syntax	OID
nntrackIntfId trackIntfId is the identifier of the bundle being tracked.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.3.1.1
nntrackIntfName Name of the bundle being tracked.	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.562.73.1.1.1.13.3.1.2
nntrackIntfStatus bundleStatus displays the status of the bundle being tracked.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.562.73.1.1.1.13.3.1.3
nntrackIntfRowStatus Used to configure or delete a tracking interface. To configure a interface, set the value of this object to createAndGo. To delete a interface, set the value of this object to destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.562.73.1.1.1.13.3.1.4

A list of Loopback Interface table entries 
for this entity.

nnloopbackIfTableEntry row .1.3.6.1.4.1.562.73.1.1.1.13.4.1

Loopback Interface parameter entries are
listed in this table.

Indexes

nnloopbackIfId

Column	Syntax	OID
nnloopbackIfId loopbackIfId is the identifier of a loopback Interface. To configure a loopback, this parameter must be used as the index. This is assigned internally by the system. Whenever a row creation needs to occur in the loo…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.562.73.1.1.1.13.4.1.1
nnloopbackIfName Name of the loopback If. To configure a loopback Interface,this parameter must be set. That is, a descriptive name should be given to a loopback inteface. The maximum length of a name is 8 characters. This parameter i…	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.562.73.1.1.1.13.4.1.2
nnloopbackIfIpAddr The loopback's source IP address. This is one of the parameters required to set up loopback interface. The parameters loopbackIfIpAddr and loopbackIfSubnetMask have to be set together during the same request. To …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.562.73.1.1.1.13.4.1.3
nnloopbackIfSubnetMask This parameter represents the source subnet mask address. This is one of the parameters required to set up loopback interface. This parameter is set along with the loopbackIfIpAddr parameter during the same request.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.562.73.1.1.1.13.4.1.4
nnloopbackIfStatus loopbackIfStatus shows the current status of the loopback interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.562.73.1.1.1.13.4.1.5
nnloopbackIfRowStatus loopbackIfRowStatus is used to add/delete a row In the table. Adding or deleting a row corresponds to creating a loopback or deleting a loopback. In order to add a row to the loopback table, a set on this parameter …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.562.73.1.1.1.13.4.1.6