BTI-OL-MIB Table View

This table lists all provisioned optical layer
module groupings on the node.

olGroupEntry row .1.3.6.1.4.1.18070.2.2.1.16.1.1

The conceptual row object of the optical layer
group table.

Indexes

olGroupIdx

Column	Syntax	OID
olGroupIdx A number which uniquely identifies the optical layer group within the node.	Integer32 Constraints: range: 0-512 range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.1.1.1
olGroupType The optical layer group configuration type. This is a mandatory object that must be specified when a row of the table is created. The value of none is not applicable for this object.	OlGroupTyper/w Type Values: 1 none 2 noEqlzTerm 3 eqlzTerm 4 noEqlzLine 5 eqlzLine 6 roadm	.1.3.6.1.4.1.18070.2.2.1.16.1.1.2
olGroupId Textual data recorded by the user to briefly identify the provisioned optical layer group in a manner useful to the user.	OctetStringr/w Constraints: range: 0-255 range: 0-32	.1.3.6.1.4.1.18070.2.2.1.16.1.1.3
olGroupCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.1.1.4
olGroupCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.1.1.5
olGroupCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.1.1.6
olGroupRowStatus Used to control the addition and deletion of entries in the optical layer group table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.1.1.100

This table lists all provisioned equipment modules
that are assigned to an optical layer grouping.

olEqptEntry row .1.3.6.1.4.1.18070.2.2.1.16.3.1

The conceptual row object of the optical layer
equipment table.

Indexes

olEqptCpTypeIdx olEqptShelfIdx olEqptSlotIdx

Column	Syntax	OID
olEqptCpTypeIdx The type of circuit pack of the equipment module that is assigned to the optical layer group.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.3.1.1
olEqptShelfIdx The number of the shelf of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in a shelf (40-channel Mux/Demux), the value of this object is 0.	Integer32 Constraints: range: 0-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.3.1.2
olEqptSlotIdx The number of the slot of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in an active shelf slot (ex. 40-channel Mux/Demux), this object represents the module …	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.3.1.3
olEqptGroupNum The optical layer group to which the equipment modules is assigned.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.3.1.4
olEqptDegreeNum The optical layer group degree to which the equipment module is assigned.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.18070.2.2.1.16.3.1.5
olEqptRowStatus Used to control the addition and deletion of entries in the optical layer equipment table, which in turn, controls the assigning and unassigning of equipment modules to/from an optical layer grouping.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.3.1.100

This table lists all managed ports on equipment modules
assigned to optical layer groupings.

olPortEntry row .1.3.6.1.4.1.18070.2.2.1.16.4.1

The conceptual row object of the optical layer port
table.

Indexes

olPortCpTypeIdx olPortShelfIdx olPortSlotIdx olPortTypeIdx olPortIdx

Column	Syntax	OID
olPortCpTypeIdx The type of circuit pack on which the optical layer port is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.4.1.1
olPortShelfIdx The number of the shelf on which the optical layer port is located.	Integer32 Constraints: range: 0-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.4.1.2
olPortSlotIdx The number of the slot on which the optical layer port is located.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.4.1.3
olPortTypeIdx The type of optical layer port according to the function it provides.	OlPortType Type Values: 1 line 2 client 3 dcm 4 channel 5 expansion	.1.3.6.1.4.1.18070.2.2.1.16.4.1.4
olPortIdx The number of the optical layer port of the specified port type.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.18070.2.2.1.16.4.1.5
olPortId Textual data recorded by the user to briefly identify the provisioned optical layer port in a manner useful to the user.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.16.4.1.6
olPortCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.4.1.7
olPortCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.4.1.8
olPortCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.4.1.9
olPortDWDMType Used to configure the port for the type of DWDM composite to which it is inter-connection. By default, all ports are inter-connected with native optical layer DWDM composites. For some configurations, client port 2 of R…	Enumerationr/w Enumerated Values: 1 native 2 alien	.1.3.6.1.4.1.18070.2.2.1.16.4.1.10
olPortGrid The DWDM grid spacing on the port.	Enumerationr/w Enumerated Values: 1 ghz100 2 ghz50	.1.3.6.1.4.1.18070.2.2.1.16.4.1.11
olPortWavelength The wavelength of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.	nanometers/100BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.16.4.1.12
olPortFrequency The frequency of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.	terahertz/100BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.16.4.1.13
olPortOperStatus The reported operational status of the optical layer port.	BTI-TC-MIBOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.16.4.1.14
olPortOperStatQlfr This is a textual list of qualifiers about the reported operational status of the optical layer port.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.16.4.1.15
olPortRemoteId Identifies the remote node and port to which the optical layer port is connected, in the format prescribed by the PSM network management system.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.4.1.16
olPortExpCnxDegree The expected degree number of the equipment that is inter-connected on the port.	Integer32 Constraints: range: 2-4	.1.3.6.1.4.1.18070.2.2.1.16.4.1.17
olPortActCnxDegree The actual degree number of the equipment that is inter-connected on the port.	Integer32 Constraints: range: 2-4	.1.3.6.1.4.1.18070.2.2.1.16.4.1.18
olPortRowStatus Used to control the addition and deletion of entries in the Optical Layer Port table. Manual creation and deletion is supported only for the client 2 port on ROB packs assigned to a Channel-equalizing Terminal or Reconf…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.4.1.100

This table lists all intra-group optical fiber patch
connections between ports on equipment modules assigned
to optical layer groupings.

eqptConnEntry row .1.3.6.1.4.1.18070.2.2.1.16.5.1

The conceptual row object of the equipment connection
table.

Indexes

eqptConnSrcCpTypeIdx eqptConnSrcShelfIdx eqptConnSrcSlotIdx eqptConnSrcPortTypeIdx eqptConnSrcIdx eqptConnDstCpTypeIdx eqptConnDstShelfIdx eqptConnDstSlotIdx eqptConnDstPortTypeIdx eqptConnDstIdx

Column	Syntax	OID
eqptConnSrcCpTypeIdx The type of circuit pack on which the source port of the equipment connection is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.5.1.1
eqptConnSrcShelfIdx The number of the shelf on which the source port of the equipment connection is located.	Integer32 Constraints: range: 0-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.5.1.2
eqptConnSrcSlotIdx The number of the slot on which the source port of the equipment connection is located.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.5.1.3
eqptConnSrcPortTypeIdx The type of the source port of the equipment connection, according to the function it provides.	OlPortType Type Values: 1 line 2 client 3 dcm 4 channel 5 expansion	.1.3.6.1.4.1.18070.2.2.1.16.5.1.4
eqptConnSrcIdx The number of the port of the specified port type of the source port of the equipment connection.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.18070.2.2.1.16.5.1.5
eqptConnDstCpTypeIdx The type of circuit pack on which the destination port of the equipment connection is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.5.1.6
eqptConnDstShelfIdx The number of the shelf on which the destination port of the equipment connection is located.	Integer32 Constraints: range: 0-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.5.1.7
eqptConnDstSlotIdx The number of the slot on which the destination port of the equipment connection is located.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.5.1.8
eqptConnDstPortTypeIdx The type of the destination port of the equipment connection, according to the function it provides.	OlPortType Type Values: 1 line 2 client 3 dcm 4 channel 5 expansion	.1.3.6.1.4.1.18070.2.2.1.16.5.1.9
eqptConnDstIdx The number of the port of the specified port type of the destination port of the equipment connection.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.18070.2.2.1.16.5.1.10
eqptConnType The type of optical fiber patch cable for the equipment connection entry.	Enumeration Enumerated Values: 1 duplex 2 loopback	.1.3.6.1.4.1.18070.2.2.1.16.5.1.11
eqptConnRowStatus The equipment connection table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted as equipment modules are assigned and unassigned to optical layer group…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.5.1.100

This table lists all OSC managed objects that have
been created on the optical layer equipment modules.

olOSCEntry row .1.3.6.1.4.1.18070.2.2.1.16.6.1

The conceptual row object of the optical laye OSC table.

Indexes

olOSCCpTypeIdx olOSCShelfIdx olOSCSlotIdx olOSCLineIdx

Column	Syntax	OID
olOSCCpTypeIdx The type of circuit pack on which the OSC is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.6.1.1
olOSCShelfIdx The number of the shelf in which the OSC is located.	Integer32 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.6.1.2
olOSCSlotIdx The number of the slot in which the OSC is located.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.16.6.1.3
olOSCLineIdx The line number of the OSC.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.18070.2.2.1.16.6.1.4
olOSCAdminStatus The administrative status of the OSC. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.16.6.1.5
olOSCOperStatus The reported operational status of the OSC.	BTI-TC-MIBOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.16.6.1.6
olOSCOperStatQlfr This is a textual list of qualifiers about the reported operational status of the OSC.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.16.6.1.7
olOSCAutoEnableTimer Specifies the auto-enable timer for the targeted OSC. This value only applies if the olOSCAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.	BTI-TC-MIBHoursAndMinutesr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.16.6.1.8
olOSCActAutoEnableTimer Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutes Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.16.6.1.9
olOSCId Textual data recorded by the user to briefly identify the OSC object in a manner useful to the user.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.16.6.1.10
olOSCCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.6.1.11
olOSCCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.6.1.12
olOSCCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.6.1.13
olOSCFEIMMon This object is used to control the monitoring of the Far End Node Mismatch Identifier condition. When enabled, the received far-end node identification attributes will be monitored and compared to the expected far-end n…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18070.2.2.1.16.6.1.14
olOSCExpFESysName The expected far-end node system identifier.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.18070.2.2.1.16.6.1.15
olOSCExpFEIPAddr The expected far-end node IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.18070.2.2.1.16.6.1.16
olOSCExpFEGrp The expected far-end node optical layer group number.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.18070.2.2.1.16.6.1.17
olOSCExpFEDegr The expected far-end node optical layer degree number.	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.18070.2.2.1.16.6.1.18
olOSCFESysName The actual far-end node system identifier.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.18070.2.2.1.16.6.1.19
olOSCFEIPAddr The actual far-end node IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18070.2.2.1.16.6.1.20
olOSCFEGrp The actual far-end node optical layer group number.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.18070.2.2.1.16.6.1.21
olOSCFEDegr The actual far-end node optical layer degree number.	Integer32 Constraints: range: 0-4	.1.3.6.1.4.1.18070.2.2.1.16.6.1.22
olOSCFEGrpType The actual far-end node optical layer group configuration type.	OlGroupType Type Values: 1 none 2 noEqlzTerm 3 eqlzTerm 4 noEqlzLine 5 eqlzLine 6 roadm	.1.3.6.1.4.1.18070.2.2.1.16.6.1.23
olOSCRowStatus The Optical Layer OSC table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB equipment is provisioned. This optical laye…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.6.1.100

This table lists all provisioned ODCC objects on 
equipment modules assigned to optical layer groupings.

odccEntry row .1.3.6.1.4.1.18070.2.2.1.16.7.1

The conceptual row object of the ODCC table.

Indexes

odccCpTypeIdx odccShelfIdx odccSlotIdx odccLineIdx

Column	Syntax	OID
odccCpTypeIdx The type of circuit pack on which the ODCC is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.7.1.1
odccShelfIdx The number of the shelf in which the ODCC is located.	Integer32 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.7.1.2
odccSlotIdx The number of the slot in which the ODC is located.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.16.7.1.3
odccLineIdx The line number of the ODCC.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.18070.2.2.1.16.7.1.4
odccAdminStatus The administrative status of the ODCC. The default value is disabled if the supporting ODC is disabled, otherwise it is enabled.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.16.7.1.5
odccRowStatus Used to control the addition and deletion of entries in the ODCC table, which in turn controls the provisioning and de-provisioning of ODCC objects.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.7.1.100

This table lists all WDM managed objects that
have been created on optical layer equipment.

wdmEntry row .1.3.6.1.4.1.18070.2.2.1.16.8.1

The conceptual row object of the WDM table.

Indexes

wdmCpTypeIdx wdmShelfIdx wdmSlotIdx wdmLineIdx

Column	Syntax	OID
wdmCpTypeIdx The type of circuit pack on which the WDM is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.8.1.1
wdmShelfIdx The number of the shelf in which the WDM is located.	Integer32 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.8.1.2
wdmSlotIdx The number of the slot in which the WDM is located.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.16.8.1.3
wdmLineIdx The line number of the WDM.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.18070.2.2.1.16.8.1.4
wdmAdminStatus The administrative status of the WDM. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.16.8.1.5
wdmOperStatus The reported operational status of the WDM.	BTI-TC-MIBOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.16.8.1.6
wdmOperStatQlfr This is a textual list of qualifiers about the reported operational status of the WDM.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.16.8.1.7
wdmAutoEnableTimer Specifies the auto-enable timer for the targeted WDM. This value only applies if the wdmAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.	BTI-TC-MIBHoursAndMinutesr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.16.8.1.8
wdmActAutoEnableTimer Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutes Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.16.8.1.9
wdmId Textual data recorded by the user to briefly identify the WDM object in a manner useful to the user.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.16.8.1.10
wdmCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.8.1.11
wdmCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.8.1.12
wdmCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.8.1.13
wdmFiberType The fiber type of the span fiber.	Enumerationr/w Enumerated Values: 1 smf	.1.3.6.1.4.1.18070.2.2.1.16.8.1.14
wdmSpanLength The measured length of the receive span fiber.	kilometersSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.8.1.15
wdmSpanLossRxHighTh The high threshold setting for the loss on the receive fiber of the Line span. The setting for this object is used to evaluate the olPortLossRxHighThCond trap. When the value of this object is set to 0, the olPortLossRx…	dB/10BTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.16.8.1.16
wdmSpanLossSpecMax The specified maximum supported loss on the Line span. The value of this object is dependent on the optical layer group configurations of the local and far-end nodes.	dB/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.16.8.1.17
wdmNumChannels The actual number of channels that the WDM is currently provisioned to carry.	Integer32 Constraints: range: 0-44	.1.3.6.1.4.1.18070.2.2.1.16.8.1.18
wdmRowStatus The WDM table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB circuit pack is assigned and unassigned to an optical lay…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.8.1.100

This table lists all configured wavelength channel
cross-connections configured on optical layer equipment.

wchXCEntry row .1.3.6.1.4.1.18070.2.2.1.16.9.1

The conceptual row object of the wavelength channel
cross-connection table.

Indexes

wchXCSrcCpTypeIdx wchXCSrcShelfIdx wchXCSrcSlotIdx wchXCSrcPortTypeIdx wchXCSrcPortIdx wchXCSrcChannelIdx wchXCDstCpTypeIdx wchXCDstShelfIdx wchXCDstSlotIdx wchXCDstPortTypeIdx wchXCDstPortIdx wchXCDstChannelIdx

Column	Syntax	OID
wchXCSrcCpTypeIdx The type of circuit pack on which the source wavelength channel of the cross-connection is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.9.1.1
wchXCSrcShelfIdx The number of the shelf on which the source wavelength channel of the cross-connection is located.	Integer32 Constraints: range: 0-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.9.1.2
wchXCSrcSlotIdx The number of the slot on which the source wavelength channel of the cross-connection is located.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.9.1.3
wchXCSrcPortTypeIdx The type of port on which the source wavelength channel of the cross-connection is located.	OlPortType Type Values: 1 line 2 client 3 dcm 4 channel 5 expansion	.1.3.6.1.4.1.18070.2.2.1.16.9.1.4
wchXCSrcPortIdx The number of the port on which the source wavelength channel of the cross-connection is located.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.18070.2.2.1.16.9.1.5
wchXCSrcChannelIdx The channel number of the source wavelength channel of the cross-connection.	Integer32 Constraints: range: 135-610	.1.3.6.1.4.1.18070.2.2.1.16.9.1.6
wchXCDstCpTypeIdx The type of circuit pack on which the destination wavelength channel of the cross-connection is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.9.1.7
wchXCDstShelfIdx The number of the shelf on which the destination wavelength channel of the cross-connection is located.	Integer32 Constraints: range: 0-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.9.1.8
wchXCDstSlotIdx The number of the slot on which the destination wavelength channel of the cross-connection is located.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.18070.2.2.1.16.9.1.9
wchXCDstPortTypeIdx The type of port on which the destination wavelength channel of the cross-connection is located.	OlPortType Type Values: 1 line 2 client 3 dcm 4 channel 5 expansion	.1.3.6.1.4.1.18070.2.2.1.16.9.1.10
wchXCDstPortIdx The number of the port on which the destination wavelength channel of the cross-connection is located.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.18070.2.2.1.16.9.1.11
wchXCDstChannelIdx The channel number of the destination wavelength channel of the cross-connection.	Integer32 Constraints: range: 135-610	.1.3.6.1.4.1.18070.2.2.1.16.9.1.12
wchXCServiceName Name of end-to-end wavelength service of which this cross- connection is a part.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.16.9.1.13
wchXCRowStatus Used to control the addition and deletion of entries in the wavelength channel cross-connection table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.9.1.100

This table lists all managed wavelength channels on
equipment modules assigned to optical layer groupings.

wchEntry row .1.3.6.1.4.1.18070.2.2.1.16.10.1

The conceptual row object of the wavelength channel
table.

Indexes

wchCpTypeIdx wchShelfIdx wchSlotIdx wchPortTypeIdx wchPortIdx wchIdx

Column	Syntax	OID
wchCpTypeIdx The type of circuit pack on which the wavelength channel is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.10.1.1
wchShelfIdx The number of the shelf on which the wavelength channel is located.	Integer32 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.10.1.2
wchSlotIdx The number of the slot on which the wavelength channel is located.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.16.10.1.3
wchPortTypeIdx The type of port on which the wavelength channel is located.	OlPortType Type Values: 1 line 2 client 3 dcm 4 channel 5 expansion	.1.3.6.1.4.1.18070.2.2.1.16.10.1.4
wchPortIdx The number of the port on which the wavelength channel is located.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.18070.2.2.1.16.10.1.5
wchIdx The number of the targeted wavelength channel.	Integer32 Constraints: range: 135-610	.1.3.6.1.4.1.18070.2.2.1.16.10.1.6
wchAdminStatus The administrative status of the wavelength channel. The default value is autoEnabled if the supporting WDM is enabled or autoEnabled, otherwise it is disabled.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.16.10.1.7
wchOperStatus The reported operational status of the wavelength channel.	BTI-TC-MIBOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.16.10.1.8
wchOperStatQlfr This is a textual list of qualifiers about the reported operational status of the wavelength channel.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.16.10.1.9
wchAutoEnableTimer Specifies the auto-enable timer for the targeted wavelength channel. This value only applies if the wchAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.	BTI-TC-MIBHoursAndMinutesr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.16.10.1.10
wchActAutoEnableTimer Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutes Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.16.10.1.11
wchId Textual data recorded by the user to briefly identify the wavelength channel object in a manner useful to the user.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.16.10.1.12
wchCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.10.1.13
wchCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.10.1.14
wchCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.16.10.1.15
wchBitrate The bitrate of the signal carried by the wavelength channel. A value of tenGig applies to all signal bitrates of 10Gb/sec or less.	Enumerationr/w Enumerated Values: 1 tenGig	.1.3.6.1.4.1.18070.2.2.1.16.10.1.16
wchGrid The minimum grid spacing with which the channel is compatible.	Enumerationr/w Enumerated Values: 1 ghz100 2 ghz50	.1.3.6.1.4.1.18070.2.2.1.16.10.1.17
wchWavelength The wavelength of the channel.	nanometers/100BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.16.10.1.18
wchFrequency The frequency of the channel.	terahertz/100BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.16.10.1.19
wchRowStatus The Wavelength Channel table RowStatus object is not readable or writeable because all entries in the Wavelength Channel table are automatically created and deleted when an wavelength channel cross-connection involving …	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.16.10.1.100

A table of current performance monitoring statistics
collected for the optical layer OSC objects on the NE.

olOSCCrntPMEntry row .1.3.6.1.4.1.18070.2.2.1.16.12.1.1

The row entry object of the optical layer OSC current
performance monitoring table. Each row of this table
contains a full set of PM statistics and related data
for a current measurement interval for a given optical
lay…

Indexes

olOSCCrntPMCpTypeIdx olOSCCrntPMShelfIdx olOSCCrntPMSlotIdx olOSCCrntPMLineIdx olOSCCrntPMIntervalTypeIdx

Column	Syntax	OID
olOSCCrntPMCpTypeIdx The type of circuit pack on which the optical layer OSC targeted for PMs is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.1
olOSCCrntPMShelfIdx The number of the shelf in which the optical layer OSC targeted for PMs is located.	Integer32 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.2
olOSCCrntPMSlotIdx The number of the slot in which the optical layer OSC targeted for PMs is located.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.3
olOSCCrntPMLineIdx The line number of the OSC targeted for PMs.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.4
olOSCCrntPMIntervalTypeIdx The type of PM bin according to interval length.	BTI-TC-MIBPMIntervalType Type Values: 1 min15 2 day1 3 untimed	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.5
olOSCCrntPMOPRValue The OSC optical power received on the Line port.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.6
olOSCCrntPMOPRTimeStamp The date and time stamp of the optical power received value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.7
olOSCCrntPMOPRValidity Indicates the validity of the provided optical power received value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.8
olOSCCrntPMOPTValue The OSC optical power transmitted at the output of the Line port.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.9
olOSCCrntPMOPTTimeStamp The date and time stamp of the optical power transmitted value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.10
olOSCCrntPMOPTValidity Indicates the validity of the provided optical power transmitted value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.11
olOSCCrntPMOBRValue The OSC optical back-reflected power.	dB/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.12
olOSCCrntPMOBRTimeStamp The date and time stamp of the optical back-reflected power value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.13
olOSCCrntPMOBRValidity Indicates the validity of the provided optical back-reflected power value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.14
olOSCCrntPMCVSValue The count of coding violations at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.15
olOSCCrntPMCVSTimeStamp The date and time stamp of the section layer coding violations value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.16
olOSCCrntPMCVSValidity Indicates the validity of the provided section layer coding violations value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.17
olOSCCrntPMCVSInitialize Used to initialize the value of the olOSCCrntPMCVSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.18
olOSCCrntPMESSValue The count of errored seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.19
olOSCCrntPMESSTimeStamp The date and time stamp of the section layer errored seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.20
olOSCCrntPMESSValidity Indicates the validity of the provided section layer errored seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.21
olOSCCrntPMESSInitialize Used to initialize the value of the olOSCCrntPMESSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.22
olOSCCrntPMSESSValue The count of severely errored seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.23
olOSCCrntPMSESSTimeStamp The date and time stamp of the section layer severely errored seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.24
olOSCCrntPMSESSValidity Indicates the validity of the provided section layer severely errored seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.25
olOSCCrntPMSESSInitialize Used to initialize the value of the olOSCCrntPMSESSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.26
olOSCCrntPMSEFSSValue The count of severely errored framing seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.27
olOSCCrntPMSEFSSTimeStamp The date and time stamp of the section layer severely errored framing seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.28
olOSCCrntPMSEFSSValidity Indicates the validity of the provided section layer severely errored framing seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.29
olOSCCrntPMSEFSSInitialize Used to initialize the value of the olOSCCrntPMSEFSSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.30
olOSCCrntPMUASSValue The count of unavailable seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.31
olOSCCrntPMUASSTimeStamp The date and time stamp of the section layer unavailable seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.32
olOSCCrntPMUASSValidity Indicates the validity of the provided section layer unavailable seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.33
olOSCCrntPMUASSInitialize Used to initialize the value of the olOSCCrntPMUASSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.1.1.34

A table of historical performance monitoring statistics
collected for the optical layer OSC objects on the NE.

olOSCHistPMEntry row .1.3.6.1.4.1.18070.2.2.1.16.12.2.1

The row entry object of the optical layer OSC historical
performance monitoring table. Each row of this table
contains a full set of PM statistics and related data
for a historical measurement interval for a given optic…

Indexes

olOSCHistPMCpTypeIdx olOSCHistPMShelfIdx olOSCHistPMSlotIdx olOSCHistPMLineIdx olOSCHistPMIntervalTypeIdx olOSCHistPMIntervalIdx

Column	Syntax	OID
olOSCHistPMCpTypeIdx The type of circuit pack on which the optical layer OSC targeted for PMs is located.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.1
olOSCHistPMShelfIdx The number of the shelf in which the optical layer OSC targeted for PMs is located.	Integer32 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.2
olOSCHistPMSlotIdx The number of the slot in which the optical layer OSC targeted for PMs is located.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.3
olOSCHistPMLineIdx The line number of the OSC targeted for PMs.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.4
olOSCHistPMIntervalTypeIdx The type of PM bin according to interval length.	BTI-TC-MIBPMIntervalType Type Values: 1 min15 2 day1 3 untimed	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.5
olOSCHistPMIntervalIdx The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.6
olOSCHistPMOPRValue The OSC optical power received on the Line port.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.7
olOSCHistPMOPRTimeStamp The date and time stamp of the optical power received value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.8
olOSCHistPMOPRValidity Indicates the validity of the provided optical power received value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.9
olOSCHistPMOPTValue The OSC optical power transmitted at the output of the Line port.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.10
olOSCHistPMOPTTimeStamp The date and time stamp of the optical power transmitted value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.11
olOSCHistPMOPTValidity Indicates the validity of the provided optical power transmitted value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.12
olOSCHistPMOBRValue The OSC optical back-reflected power.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.13
olOSCHistPMOBRTimeStamp The date and time stamp of the optical back-reflected power value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.14
olOSCHistPMOBRValidity Indicates the validity of the provided optical back-reflected power value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.15
olOSCHistPMCVSValue The count of coding violations at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.16
olOSCHistPMCVSTimeStamp The date and time stamp of the section layer coding violations value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.17
olOSCHistPMCVSValidity Indicates the validity of the provided section layer coding violations value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.18
olOSCHistPMCVSInitialize Used to initialize the value of the olOSCHistPMCVSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.19
olOSCHistPMESSValue The count of errored seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.20
olOSCHistPMESSTimeStamp The date and time stamp of the section layer errored seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.21
olOSCHistPMESSValidity Indicates the validity of the provided section layer errored seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.22
olOSCHistPMESSInitialize Used to initialize the value of the olOSCHistPMESSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.23
olOSCHistPMSESSValue The count of severely errored seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.24
olOSCHistPMSESSTimeStamp The date and time stamp of the section layer severely errored seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.25
olOSCHistPMSESSValidity Indicates the validity of the provided section layer severely errored seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.26
olOSCHistPMSESSInitialize Used to initialize the value of the olOSCHistPMSESSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.27
olOSCHistPMSEFSSValue The count of severely errored framing seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.28
olOSCHistPMSEFSSTimeStamp The date and time stamp of the section layer severely errored framing seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.29
olOSCHistPMSEFSSValidity Indicates the validity of the provided section layer severely errored framing seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.30
olOSCHistPMSEFSSInitialize Used to initialize the value of the olOSCHistPMSEFSSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.31
olOSCHistPMUASSValue The count of unavailable seconds at the section layer of the received OSC signal.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.32
olOSCHistPMUASSTimeStamp The date and time stamp of the section layer unavailable seconds value.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.33
olOSCHistPMUASSValidity Indicates the validity of the provided section layer unavailable seconds value.	BTI-TC-MIBPMValidity Type Values: 1 complete 2 notAvailable 3 partialCount	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.34
olOSCHistPMUASSInitialize Used to initialize the value of the olOSCHistPMUASSValue object to 0.	BTI-TC-MIBInitializeCmdr/w Type Values: 1 idle 2 initialize	.1.3.6.1.4.1.18070.2.2.1.16.12.2.1.35