BTI-7000-MIB Table View

A list of NTP servers to poll for the system time. The NTP
client then decides which is best clock source.

ntpClientAssocEntry row .1.3.6.1.4.1.18070.2.2.1.1.13.6.1

The list entry for an NTP server.

Indexes

No indexes recorded

Column	Syntax	OID
ntpClientAssocIdx The IP address of the NTP server.	SNMPv2-SMIIpAddress Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.1.13.6.1.1
ntpClientAssocRowStatus Used to control the addition and deletion of entries in the NTP client association table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.1.13.6.1.100

This table contains one row for every physically detected
shelf on the NE. Each row contains a list of attributes that
pertain to a physical shelf.

shelfInvEntry row .1.3.6.1.4.1.18070.2.2.1.2.1.1

The conceptual row object of the shelf inventory table.

Indexes

No indexes recorded

Column	Syntax	OID
shelfInvIdx The number of the shelf. It is set to 1 for the main shelf, otherwise the object is based on the expansion shelf port on which the shelf is detected, and the number of hops from the main shelf.	Integer32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.1
shelfInvExpectedNEName The NE name expected by the main shelf to be reported by the expansion shelf as the name of the NE to which it belongs.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.18070.2.2.1.2.1.1.2
shelfInvExpectedIPAddress The string representation of the NE NMS IP address that is expected by the main shelf to be reported by the expansion shelf as the IP address of the NE to which it belongs.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.3
shelfInvExpectedShelfNum The number of the expansion shelf that is expected by the main shelf to be reported by the attached shelf.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.18070.2.2.1.2.1.1.4
shelfInvExpectedMSISerialNum The serial number of the Main Shelf Interface circuit pack that is expected by the main shelf to be reported by the expansion shelf as the MSI serial number of the NE main shelf to which it belongs.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.18070.2.2.1.2.1.1.5
shelfInvDiscoveredNEName The actual NE name reported by the expansion shelf as the name of the NE to which it belongs.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.6
shelfInvDiscoveredIPAddress The string representation of the actual NE NMS IP address reported by the expansion shelf as the IP address of the NE to which it belongs.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.7
shelfInvDiscoveredShelfNum The actual number of the expansion shelf reported by the attached shelf.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.8
shelfInvDiscoveredMSISerialNum The actual serial number of the Main Shelf Interface circuit pack reported by the expansion shelf as the MSI serial number of the NE main shelf to which it belongs.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.18070.2.2.1.2.1.1.9
shelfInvType Indicates if the shelf functions as a main shelf or an expansion shelf.	BTI-TC-MIBShelfType Constraints: range: 0-16 Type Values: 1 main 2 expansion	.1.3.6.1.4.1.18070.2.2.1.2.1.1.10
shelfInvShortName A concise representation of the shelf brand name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.11
shelfInvName The full representation of the shelf brand name.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.18070.2.2.1.2.1.1.12
shelfInvChassisPEC A string representation of the Product Equipment Code for the shelf chassis alone.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.13
shelfInvChassisCLEI A string representation of the Telcordia Common Language Equipment Identifier for the shelf chassis alone.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.1.1.14
shelfInvAssemblyPECobsolete A string representation of the Product Equipment Code for the shelf assembly, which bundles the shelf chassis, shelf interface pack, and cooling unit.	OctetString Enumerated Values: 1 success 2 failure	.1.3.6.1.4.1.18070.2.2.1.2.1.1.15
shelfInvRev The shelf hardware revision number. A value of 0 indicates that the revision is unspecified.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.1.1.16
shelfInvConfigdeprecated The shelf configuration with respect to the number of slots for holding replaceable circuit packs. Note: This object is no longer supported as of BTI 7000 Release 8.1.0, and is maintained in the MIB for b…	BTI-TC-MIBShelfConfigType Constraints: range: 1-65535 Type Values: 1 twoSlot 2 threeSlot 3 fourSlot 4 fiveSlot 5 sixSlot 6 fourSlotB 7 fourSlotC 8 fiveSlotB 9 fiveSlotC 10 unknown	.1.3.6.1.4.1.18070.2.2.1.2.1.1.17
shelfInvUSI The Unique Serial Identifier (only for FNC-branded equipment)	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.18070.2.2.1.2.1.1.18
shelfInvSerialNum The serial number of the unit.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.1.1.19
shelfInvMfgDate The shelf manufacture date in the format YYYY-MM-DD.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.1.1.20
shelfInvMfgLoc The shelf manufacture location.	OctetString Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.2.1.1.21
shelfInvTestDate The shelf test date in the format YYYY-MM-DD.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.1.1.22
shelfInvTestLoc The shelf test location.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.2.1.1.23

This table contains one row for every slot on every shelf of
the NE in which a circuit pack or other replaceable unit is
seated. Each row contains a list of attributes that pertain to
the circuit pack within the slot.

slotInvEntry row .1.3.6.1.4.1.18070.2.2.1.2.2.1

The conceptual row object of the slot inventory table.

Indexes

No indexes recorded

Column	Syntax	OID
slotInvShelfIdx The number of the shelf on which the slot inventory item is detected.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.2.1.1
slotInvSlotTypeIdx The type of slot that contains the inventory item.	BTI-TC-MIBSlotType Constraints: range: 0-32 Type Values: 1 regular 2 shelfInterface 3 coolingUnit 4 acPowerUnit	.1.3.6.1.4.1.18070.2.2.1.2.2.1.2
slotInvSlotIdx The number of the slot within the shelf containing the inventory item. The number is from 1 to 20 for regular circuit pack slots. For main shelf interface type slots, the number is set to 0. For 7060/7030/7020 expansion…	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.18070.2.2.1.2.2.1.3
slotInvSWVersion The version of the software running on the circuit pack in the given slot.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.18070.2.2.1.2.2.1.4
slotInvPackShortName A concise representation of the name of the circuit pack or unit.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.18070.2.2.1.2.2.1.5
slotInvPackName The full name of the circuit pack or unit.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.18070.2.2.1.2.2.1.6
slotInvPackPEC The Product Equipment Code for the circuit pack or unit.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.2.2.1.7
slotInvPackCLEI The Telcordia Common Language Equipment Identifier for the circuit pack or unit.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.18070.2.2.1.2.2.1.8
slotInvPackSerialNum The serial number of the unit.	OctetString Enumerated Values: 1 unknown 2 sc 3 fcs1cc 4 fcs2cc 5 bnctnc 6 fcch 7 fj 8 lc 9 mtrj 10 mu 11 sg 12 op 13 hssdc2 14 cp 15 vs	.1.3.6.1.4.1.18070.2.2.1.2.2.1.9
slotInvPackRev The circuit pack or unit hardware revision number. A value of 0 indicates that the revision is unspecified.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.18070.2.2.1.2.2.1.10
slotInvPackMfgDate The circuit pack manufacture date in the format YYYY-MM-DD.	OctetString Constraints: range: 0-65535	.1.3.6.1.4.1.18070.2.2.1.2.2.1.11
slotInvPackMfgLoc The circuit pack manufacture location.	OctetString Constraints: range: 0-65535	.1.3.6.1.4.1.18070.2.2.1.2.2.1.12
slotInvPackTestDate The circuit pack test date in the format YYYY-MM-DD.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.18070.2.2.1.2.2.1.13
slotInvPackTestLoc The circuit pack test location.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.2.1.14
slotInvUpgradeStage The stage of the circuit pack upgrade process that has been completed.	BTI-TC-MIBUpgradeCompleteStage Constraints: range: 0-65535 Type Values: 1 inactive 2 started 3 loadStarted 4 loadDone 5 reboot 6 done 7 systemDone 8 autoNr	.1.3.6.1.4.1.18070.2.2.1.2.2.1.15
slotInvUpgradeResult Indicates if the identified stage of the circuit pack upgrade process has resulted in success or failure.	Enumeration	.1.3.6.1.4.1.18070.2.2.1.2.2.1.16
slotInvPackUSI The Unique Serial Identifier (only for FNC-branded equipment)	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.2.1.17
slotInvTempHighTh The circuit pack high temperature threshold.	degrees CelsiusInteger32	.1.3.6.1.4.1.18070.2.2.1.2.2.1.18
slotInvTempShutdownTh The circuit pack shutdown temperature threshold.	degrees CelsiusInteger32	.1.3.6.1.4.1.18070.2.2.1.2.2.1.19

This table contains one row for every SFP/XFP or other
pluggable present on any circuit pack or other replaceable
unit present in the NE. Each row contains a list of attributes
that pertain to the detected SFP/XFP.

pluggableInvEntry row .1.3.6.1.4.1.18070.2.2.1.2.3.1

The conceptual row object of the pluggable inventory table.

Indexes

No indexes recorded

Column	Syntax	OID
pluggableInvShelfIdx The number of the shelf on which the pluggable inventory item resides.	Integer32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.1
pluggableInvSlotTypeIdx The type of slot containing the pluggable inventory item.	BTI-TC-MIBSlotType Type Values: 1 regular 2 shelfInterface 3 coolingUnit 4 acPowerUnit	.1.3.6.1.4.1.18070.2.2.1.2.3.1.2
pluggableInvSlotIdx The number of the slot that contains the pluggable inventory item.	Integer32 Constraints: range: 0-0 range: 50-50 range: 100-100	.1.3.6.1.4.1.18070.2.2.1.2.3.1.3
pluggableInvPortIdx The number of the port on the circuit pack that contains the pluggable inventory item.	Integer32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.4
pluggableInvType The type of small form-factor pluggable inventory item.	Enumeration	.1.3.6.1.4.1.18070.2.2.1.2.3.1.5
pluggableInvPEC The Product Equipment Code for the pluggable inventory item.	OctetString Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.2.3.1.6
pluggableInvCLEI The Telcordia Common Language Equipment Identifier for the pluggable inventory item.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.3.1.7
pluggableInvVendorName The Vendor Name of the pluggable inventory item.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.18070.2.2.1.2.3.1.8
pluggableInvVendorOUI The Vendor IEEE Organizationally Unique Identifier.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.3.1.9
pluggableInvVendorPartNum The Vendor Part Number.	OctetString Enumerated Values: 1 wavelength 2 loss 3 dispersion	.1.3.6.1.4.1.18070.2.2.1.2.3.1.10
pluggableInvVendorRev The Vendor Revision Number.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.3.1.11
pluggableInvVendorSerialNum The Vendor Serial Number.	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.3.1.12
pluggableInvMfgDate The manufacture date in the format YYYY-MM-DD..	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.3.1.13
pluggableInvConnectorType The type of connector on the pluggable unit.	Enumeration Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.2.3.1.14
pluggableInvMinBitRate The minimum bit rate supported by the pluggable. A value of 0 means unspecified.	MBits/secInteger32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.15
pluggableInvMaxBitRate The maximum bit rate supported by the pluggable. A value of 0 means unspecified.	MBits/secInteger32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.16
pluggableInvNomBitRate The nominal bit rate supported by the pluggable. A value of 0 means unspecified.	MBits/secInteger32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.17
pluggableInvEncoding A textual comma-delimited list of serial encoding mechanisms supported by the pluggable.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.18
pluggableInvWavelength The wavelength transmitted by the pluggable. A value of 0 means unspecified.	nanometers/100BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.2.3.1.19
pluggableInvReach The reach supported by the pluggable. A value of 0 means unspecified.	kilometersInteger32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.20
pluggableInvTxFaultImpl Indicates if the pluggable implements the Transmit Fault signal.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.18070.2.2.1.2.3.1.21
pluggableInvLOSImpl Indicates if the pluggable implements the Loss of Signal signal.	SNMPv2-TCTruthValue Constraints: range: 0-20 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.18070.2.2.1.2.3.1.22
pluggableInvDDiagImpl Indicates if the pluggable implements support for Digital Diagnostics.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.18070.2.2.1.2.3.1.23
pluggableInvTxDisableImpl Indicates if the pluggable implements support for disabling the transmit laser.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.18070.2.2.1.2.3.1.24
pluggableInvMedia The physical media type of the pluggable	Enumeration	.1.3.6.1.4.1.18070.2.2.1.2.3.1.25
pluggableInvUSI The Unique Serial Identifier (only for FNC-branded equipment)	OctetString	.1.3.6.1.4.1.18070.2.2.1.2.3.1.26
pluggableInvWavelengthMin The wavelength minimum for the tunable pluggable. A value of 0 means unspecified.	nanometers/100BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.2.3.1.27
pluggableInvWavelengthMax The wavelength maximum for the tunable pluggable.A value of 0 means unspecified.	nanometers/100BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.2.3.1.28
pluggableInvWavelengthSpacing The wavelength spacing for the tunable pluggable. A value of 0 means unspecified.	GHzInteger32	.1.3.6.1.4.1.18070.2.2.1.2.3.1.29

This table contains a listing of any specialized data
records available for the slot inventory entries on the
system. Each row contains a single item of data for a
specialized data record for a slot inventory entry.

slotInvDataEntry row .1.3.6.1.4.1.18070.2.2.1.2.4.1

The conceptual row object of the slot inventory data table.

Indexes

No indexes recorded

Column	Syntax	OID
slotInvDataShelfIdx The number of the shelf on which the slot inventory item is detected.	Integer32 Constraints: range: 0-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.2.4.1.1
slotInvDataSlotTypeIdx The type of slot that contains the inventory item.	BTI-TC-MIBSlotType Constraints: range: 1-255 Type Values: 1 regular 2 shelfInterface 3 coolingUnit 4 acPowerUnit	.1.3.6.1.4.1.18070.2.2.1.2.4.1.2
slotInvDataSlotIdx The number of the slot within the shelf containing the inventory item. The number is from 1 to 20 for regular circuit pack slots. For shelfInterface and coolingUnit type slots, the number is set to 0.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.18070.2.2.1.2.4.1.3
slotInvDataRecordIdx The specialized data record index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18070.2.2.1.2.4.1.4
slotInvDataNameIdx The name of the data item.	Enumeration	.1.3.6.1.4.1.18070.2.2.1.2.4.1.5
slotInvDataValue The value of the data item.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.2.4.1.6

This table contains one row for every provisioned shelf on the
NE. Each row contains a list of attributes that pertain to a
provisioned shelf.

shelfEntry row .1.3.6.1.4.1.18070.2.2.1.3.1.1

The conceptual row object of the shelf table.

Indexes

No indexes recorded

Column	Syntax	OID
shelfIdx The number of the shelf that has been provisioned. This is set to 1 for the main shelf. Otherwise, the number is based on the expansion shelf port number on which this shelf is expected to be detected and the number of …	Integer32	.1.3.6.1.4.1.18070.2.2.1.3.1.1.1
shelfProvConfigdeprecated The provisioned configuration for the shelf. Note: This object is no longer supported as of BTI 7000 Release 8.1.0, and is maintained in the MIB for backwards- compatibility for management of pre-8.1 node…	BTI-TC-MIBShelfConfigTyper/w Type Values: 1 twoSlot 2 threeSlot 3 fourSlot 4 fiveSlot 5 sixSlot 6 fourSlotB 7 fourSlotC 8 fiveSlotB 9 fiveSlotC 10 unknown	.1.3.6.1.4.1.18070.2.2.1.3.1.1.2
shelfDiscConfigdeprecated The configuration of the actual shelf discovered. Note: This object is no longer supported as of BTI 7000 Release 8.1.0, and is maintained in the MIB for backwards- compatibility for management of pre-8.1…	BTI-TC-MIBShelfConfigType Type Values: 1 twoSlot 2 threeSlot 3 fourSlot 4 fiveSlot 5 sixSlot 6 fourSlotB 7 fourSlotC 8 fiveSlotB 9 fiveSlotC 10 unknown	.1.3.6.1.4.1.18070.2.2.1.3.1.1.3
shelfType Indicates if the provisioned shelf is a main or expansion shelf. Only expansion shelves can be created. The main shelf is automatically provisioned and can never be de-provisioned.	BTI-TC-MIBShelfTyper/w Enumerated Values: 1 success 2 failure	.1.3.6.1.4.1.18070.2.2.1.3.1.1.4
shelfPEC Indicates the provisioned shelf Product Equipment Code. This is a mandatory object when a row of the shelf table is created. The PEC can only be set at the time of row creation, and it cannot be edited later.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.3.1.1.5
shelfAdminStatus The administrative status of the shelf.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.3.1.1.6
shelfOperStatus The reported operational status of the shelf.	BTI-TC-MIBOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.3.1.1.7
shelfOperStatQlfr A textual list of qualifiers of the reported operational status of the shelf.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.3.1.1.8
shelfId Textual data recorded by the user to describe the provisioned shelf in a manner useful to the user such as the location where the shelf is installed.	OctetStringr/w Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.3.1.1.9
shelfCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.3.1.1.10
shelfCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-1 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.3.1.1.11
shelfCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: -32768-32767 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.3.1.1.12
shelfPowerFeedA The power feed mode for rail A.	BTI-TC-MIBPowerFeedModeTyper/w Constraints: range: -32768-32767 Type Values: 1 ac 2 dc 3 none 4 both	.1.3.6.1.4.1.18070.2.2.1.3.1.1.13
shelfPowerFeedB The power feed mode for rail B.	BTI-TC-MIBPowerFeedModeTyper/w Constraints: range: -32768-32767 Type Values: 1 ac 2 dc 3 none 4 both	.1.3.6.1.4.1.18070.2.2.1.3.1.1.14
shelfRowStatus Used to control the addition and deletion of entries in the shelf table, which in turn controls provisioning and deprovisioning of shelf objects.	SNMPv2-TCRowStatusr/w Constraints: range: -32768-32767 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.3.1.1.100

This table contains one row for every provisioned circuit pack
on the NE. Each row contains a list of attributes that pertain
to a provisioned circuit pack.

cpEntry row .1.3.6.1.4.1.18070.2.2.1.3.2.1

The conceptual row object of the circuit pack table.

Indexes

No indexes recorded

Column	Syntax	OID
cpTypeIdx The specific type of circuit pack provisioned.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.3.2.1.1
cpShelfIdx The number of the shelf on which the circuit pack is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.3.2.1.2
cpSlotIdx The number of the slot in which the circuit pack is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.3.2.1.3
cpPEC Indicates the provisioned circuit pack Product Equipment Code. This is a mandatory object when a row of the circuit pack table is created. The PEC can only be set at the time of row creation, and it cannot be edited lat…	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.3.2.1.4
cpAdminStatus The administrative status of the circuit pack.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.3.2.1.5
cpOperStatus The reported operational status of the circuit pack.	BTI-TC-MIBOperStatus Constraints: range: -32768-32767 Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.3.2.1.6
cpOperStatQlfr A textual list of qualifiers of the reported operational status of the circuit pack.	BTI-TC-MIBOperStatQlfr Constraints: range: -32768-32767	.1.3.6.1.4.1.18070.2.2.1.3.2.1.7
cpId Textual data recorded by the user to describe the provisioned circuit pack in a manner useful to the user.	OctetStringr/w Constraints: range: -32768-32767	.1.3.6.1.4.1.18070.2.2.1.3.2.1.8
cpCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.3.2.1.9
cpCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.3.2.1.10
cpCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.3.2.1.11
cpUpgradeStage Used in notifications sent during the circuit pack software upgrade process. It indicates the stage of the circuit pack upgrade process that has been completed.	BTI-TC-MIBUpgradeCompleteStage Type Values: 1 inactive 2 started 3 loadStarted 4 loadDone 5 reboot 6 done 7 systemDone 8 autoNr	.1.3.6.1.4.1.18070.2.2.1.3.2.1.12
cpUpgradeResult Indicates if the identified stage of the circuit pack upgrade process has resulted in success or failure.	Enumeration	.1.3.6.1.4.1.18070.2.2.1.3.2.1.13
cpRowStatus Used to control the addition and deletion of entries in the circuit pack table, which in turn controls the provisioning and de-provisioning of circuit pack objects.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.3.2.1.100

This table contains one row for every provisioned optical
amplifier facility on the NE. Each row contains a list of
attributes that pertain to the optical amplifier.

oaEntry row .1.3.6.1.4.1.18070.2.2.1.4.1.1

The conceptual row object of the optical amplifier table.

Indexes

No indexes recorded

Column	Syntax	OID
oaTypeIdx The specific type of optical amplifier provisioned.	BTI-TC-MIBOaType Type Values: 1 oba 2 ola 3 opa 4 olam 10 spa 11 sba	.1.3.6.1.4.1.18070.2.2.1.4.1.1.1
oaShelfIdx The number of the shelf on which the optical amplifier facility is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.2
oaSlotIdx The number of the slot in which the optical amplifier facility is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.3
oaIdx The number of the port on the circuit pack on which the optical amplifier facility is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.4
oaCaseTempMaxTh The case temperature threshold.	degrees CelsiusInteger32r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.5
oaCaseTempMaxShutdownTh The case temperature shutdown threshold.	degrees CelsiusInteger32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.6
oaLaserTempMinShutdownTh The laser temperature minimum shutdown threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	degrees CelsiusInteger32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.7
oaLaserTempMaxShutdownTh The laser temperature maximum shutdown threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	degrees CelsiusInteger32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.8
oaOpticalPwrReceivedMinTh The optical power received minimum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	dBm/10BTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.9
oaOpticalPwrReceivedMaxTh The optical power received maximum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	dBm/10BTI-TC-MIBFixedX10r/w Enumerated Values: 2 constantGain 3 constantPower	.1.3.6.1.4.1.18070.2.2.1.4.1.1.10
oaSSIOpticalPwrReceivedMaxTh The secondary stage input optical power received maximum threshold. This object is applicable only to OLAM type amplifiers.	dBm/10BTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.11
oaOpticalPwrTransmittedMinTh The optical power transmitted minimum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	dBm/10BTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.12
oaOpticalPwrTransmittedMaxTh The optical power transmitted maximum threshold. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	dBm/10BTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.13
oaBackReflectionSafetyTh The optical back reflection safety threshold.	dBm/10BTI-TC-MIBFixedX10 Enumerated Values: 1 none 2 constantGain 3 constantPower 4 eyeSafe 5 shutdown 6 constantGainOff 7 constantPowerOff 8 constantLaserCurrent 9 constantLaserCurrentOff 10 constantLaserPower 11 constantLaserPowerOff	.1.3.6.1.4.1.18070.2.2.1.4.1.1.14
oaMSInsertionLossMaxTh This is the mid-stage maximum insertion loss signal threshold. It applies to mid-stage access amplifiers only.	dB/10BTI-TC-MIBFixedX10r/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.18070.2.2.1.4.1.1.15
oaCaseTemp The optical amplifier case temperature.	degrees CelsiusInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.16
oaLaser1Temp The temperature of the optical amplifier laser 1.	degrees CelsiusInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.17
oaLaser2Temp The temperature of the optical amplifier laser 2.	degrees CelsiusInteger32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.18
oaOpticalPwrReceived The optical power received on the input of the amplifier.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.19
oaSSIOpticalPwrReceived The optical power received on the second stage of the amplifier. It applies to mid-stage access amplifiers only.	dBm/10BTI-TC-MIBFixedX10 Constraints: range: 0-40	.1.3.6.1.4.1.18070.2.2.1.4.1.1.20
oaOpticalPwrTransmitted The optical power transmitted at the output of the amplifier.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.21
oaMSInsertionLoss The mid-stage insertion loss. This object is only applicable to OLAM type amplifiers.	dB/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.22
oaEffectiveGain The effective gain level of the optical amplifier.	dB/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.33
oaFSOOpticalPwrTransmitted The optical power transmitted at the output of the first stage of the amplifier. It applies to mid-stage access amplifiers only.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.34
oaLaser1Current The optical amplifier laser 1 current.	mAmp/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.35
oaLaser2Current The optical amplifier laser 2 current.	mAmp/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.36
oaLaser1Power The optical amplifier laser 1 power.	mWatts/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.37
oaLaser2Power The optical amplifier laser 2 power.	mWatts/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.38
oaOpticalBackReflection The optical back reflection of the amplifier.	dB/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.1.1.39
oaVariableOpticalAttenuation The variable optical attenuation of the amplifier.	dB/10BTI-TC-MIBFixedX10 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.4.1.1.40
oaAdminStatus The administrative status of the optical amplifier.	BTI-TC-MIBAdminStatusr/w Constraints: range: 1-20 Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.4.1.1.41
oaOperStatus The reported operational status of the optical amplifier.	BTI-TC-MIBOperStatus Constraints: range: 1-4 Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.4.1.1.42
oaOperStatQlfr A textual list of qualifiers of the reported operational status of the optical amplifier.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.4.1.1.43
oaAutoEnableTimer Specifies the auto-enable timer for the targeted optical amplifier. This value only applies if the oaAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00. The supported range of values is 00…	BTI-TC-MIBHoursAndMinutesr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.4.1.1.44
oaActAutoEnableTimer Indicates the time remaining on the auto-enable timer, if it is actively counting down. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutes Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.4.1.1.45
oaModeSetting The desired mode of operation to which this optical amplifier is set.	Enumerationr/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.46
oaGainSetting The effective gain (excluding ASE) set point. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	dBBTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.47
oaPwrSetting The signal output power (excluding ASE) set point. A default value is provided when the optical amplifier is created based on the optical amplifier type provisioned.	dBmBTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.48
oaTiltCompSetting The desired tilt compensation to which this optical amplifier is set.	dBBTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.49
oaStatus The specific operational status of the amplifier.	Enumeration Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.4.1.1.50
oaLaserStatus The actual operational status of the optical amplifier laser.	Enumeration	.1.3.6.1.4.1.18070.2.2.1.4.1.1.51
oaId1 Textual data recorded by the user to describe the provisioned optical amplifier in a manner useful to the user.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.52
oaId2 Textual data recorded by the user to describe the provisioned optical amplifier in a manner useful to the user.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.53
oaFiberType An optional specification of the fiber type that interfaces with the optical amplifier.	BTI-TC-MIBFiberTyper/w Type Values: 1 none 2 dsf 3 ndsf 4 nzdsf 5 multimode	.1.3.6.1.4.1.18070.2.2.1.4.1.1.54
oaGrid An optional indication of the WDM grid to which the link conforms.	BTI-TC-MIBWDMGridr/w Type Values: 1 none 2 ghz50 3 ghz100 4 ghz200 5 nm20	.1.3.6.1.4.1.18070.2.2.1.4.1.1.55
oaNumChannels An optional indication of the number of channels that the link is carrying.	Integer32r/w	.1.3.6.1.4.1.18070.2.2.1.4.1.1.56
oaCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.1.1.57
oaCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.1.1.58
oaCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.1.1.59
oaWavelength The wavelength transmitted from the OA port. This object applies only to single channel amplifiers (sba, spa).	BTI-TC-MIBFixedX100r/w Constraints: range: 0-20	.1.3.6.1.4.1.18070.2.2.1.4.1.1.60
oaRemoteId Identifies the remote node and port to which the optical amplifier port is connected, in the format prescribed by the PSM network management system.	SNMPv2-TCDisplayStringr/w Enumerated Values: 1 enabled 2 disabled Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.1.1.61
oaRowStatus Used to control the addition and deletion of entries in the optical amplifier table, which in turn controls provisioning and deprovisioning of optical amplifier facilities.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 enabled 2 disabled Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.4.1.1.100

This table contains one row for every provisioned optical
transceiver on a wavelength translator, regenerator or manager
card. Each row contains a list of attributes that pertain to
the transceiver.

xcvrEntry row .1.3.6.1.4.1.18070.2.2.1.4.2.1

The conceptual row object of the optical transceiver table.

Indexes

No indexes recorded

Column	Syntax	OID
xcvrTypeIdx The specific type of wavelength conversion function of the circuit pack on which the transceiver is provisioned.	BTI-TC-MIBXcvrType Constraints: range: 0-32 Type Values: 1 wt 2 wr 3 wm 4 tpr	.1.3.6.1.4.1.18070.2.2.1.4.2.1.1
xcvrShelfIdx The number of the shelf on which the transceiver is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.2.1.2
xcvrSlotIdx The number of the slot within which the transceiver is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.2.1.3
xcvrIdx The number of the port on the circuit pack on which the transceiver is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.2.1.4
xcvrOpticalPwrReceivedMinTh This is the optical power received minimum threshold.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.2.1.5
xcvrOpticalPwrReceivedMaxTh This is the optical power received maximum threshold.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.2.1.6
xcvrOpticalPwrTransmittedMinTh This is the optical power transmitted minimum threshold.	dBm/10BTI-TC-MIBFixedX10 Constraints: range: 0-16	.1.3.6.1.4.1.18070.2.2.1.4.2.1.7
xcvrOpticalPwrTransmittedMaxTh This is the optical power transmitted maximum threshold.	dBm/10BTI-TC-MIBFixedX10 Constraints: range: 0-16	.1.3.6.1.4.1.18070.2.2.1.4.2.1.8
xcvrOpticalPwrReceived The optical power received on the input of the transceiver.	dBm/10BTI-TC-MIBFixedX10 Constraints: range: 0-16	.1.3.6.1.4.1.18070.2.2.1.4.2.1.9
xcvrOpticalPwrTransmitted The optical power transmitted at the output of the transceiver.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.2.1.10
xcvrProtSwEvtType Indicates the type of protection switching event that has occured on an optical transceiver port.	BTI-TC-MIBProtSwEvtType Type Values: 1 autoWorkSwProt 2 autoWorkSwBack 3 manWorkSwProt 4 manWorkSwBack 5 frcdWorkSwProt 6 frcdWorkSwBack 7 lockoutOfWork 8 lockoutOfProt 9 releaseProtSw	.1.3.6.1.4.1.18070.2.2.1.4.2.1.11
xcvrPEC An optionally provisioned transceiver Product Equipment Code used to validate the physically present transceiver.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.12
xcvrAdminStatus The administrative status of the optical transceiver.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.4.2.1.13
xcvrOperStatus The reported operational status of the optical transceiver.	BTI-TC-MIBOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.4.2.1.14
xcvrOperStatQlfr This is a textual list of qualifiers about the reported operational status of the optical transceiver.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.4.2.1.15
xcvrAutoEnableTimer Specifies the auto-enable timer for the targeted optical transceiver. This value only applies if the xcvrAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutesr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.4.2.1.16
xcvrActAutoEnableTimer Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutes Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.4.2.1.17
xcvrProtocol The protocol of the service to be carried by the port. This is a mandatory object when a row of the transceiver table is created.	BTI-TC-MIBXcvrProtocolTyper/w Constraints: range: 1-1 range: 3-3 range: 5-5 range: 7-7 range: 9-9 range: 11-11 range: 13-13 range: 15-15 range: 17-17 range: 19-19 Type Values: 1 none 2 autodetect 3 escon 4 fc100 5 fc200 6 fddi 7 fe 8 ge 9 oc3 10 oc12 11 oc48 12 oc48fec 13 smpte259 14 smpte344 15 smpte292 16 stm1 17 stm4 18 stm16 19 tenGeLan 20 tenGeLanFec 21 oc192 22 oc192Fec 23 stm64 24 stm64Fec 25 fc400 26 fc1200 27 tenGeLanEFec 28 oc192EFec 29 stm64EFec 30 odu1otu2Fec 31 tenGeLanFecEPCMF 32 tenGeLanEFecEPCMF 33 otu2eFec 34 otu2eEFec 35 tenGeLanFecEPV3 36 tenGeLanEFecEPV3	.1.3.6.1.4.1.18070.2.2.1.4.2.1.18
xcvrWavelength The wavelength to be transmitted by the transceiver port. This is a mandatory object when a row of the transceiver table is created for ports that have a pluggable transceiver.	BTI-TC-MIBFixedX100r/w Constraints: range: 1-1	.1.3.6.1.4.1.18070.2.2.1.4.2.1.19
xcvrVendorPN1 An optionally provisioned part number used to validate the physically present transceiver.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.20
xcvrVendorPN2 An optionally provisioned part number used to validate the physically present transceiver.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.21
xcvrVendorPN3 An optionally provisioned part number used to validate the physically present transceiver.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.22
xcvrPhyPMMon Indicates if the port is configured to report threshold crossing conditions for physical layer performance monitoring parameters.	Enumerationr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.23
xcvrFPSD Indicates if the port is configured for Fault Propagation Shut Down.	Enumerationr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.24
xcvrLaserStatus An indication of the operational status of the transceiver laser.	Enumeration	.1.3.6.1.4.1.18070.2.2.1.4.2.1.25
xcvrId1 Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.26
xcvrId2 Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.27
xcvrFiberType An optional specification of the fiber type that interfaces to the optical transceiver.	BTI-TC-MIBFiberTyper/w Type Values: 1 none 2 dsf 3 ndsf 4 nzdsf 5 multimode	.1.3.6.1.4.1.18070.2.2.1.4.2.1.28
xcvrGrid An optical indication of the WDM grid the link conforms.	BTI-TC-MIBWDMGridr/w Type Values: 1 none 2 ghz50 3 ghz100 4 ghz200 5 nm20	.1.3.6.1.4.1.18070.2.2.1.4.2.1.29
xcvrCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.2.1.30
xcvrCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.2.1.31
xcvrCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.2.1.32
xcvrTraceLabel If specified, this attribute will describe the trace label to be used in the outgoing OTN or SONET/SDH trace.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.2.1.33
xcvrExpectedTraceLabel This attribute will describe the trace label that is expected to be received in the incoming OTN or SONET/SDH trace. If specified, this expected trace label will be compared to the actual value for xcvrReceivedTraceLabe…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.4.2.1.34
xcvrReceivedTraceLabel The actual received trace label on the incoming OTN or SONET/SDH trace.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.4.2.1.35
xcvrSDBERTh The Bit Error Rate threshold above which the Signal Degrade condition is raised.	BTI-TC-MIBBERTyper/w Type Values: 1 none 2 tenExpMinus9 3 tenExpMinus8 4 tenExpMinus7 5 tenExpMinus6 6 tenExpMinus5 7 tenExpMinus4 8 tenExpMinus3 9 tenExpMinus10 10 tenExpMinus11 11 tenExpMinus12	.1.3.6.1.4.1.18070.2.2.1.4.2.1.36
xcvrLoopbackType The loopback type that is currently active on the xcvr	BTI-TC-MIBLoopbackType Type Values: 0 noLoopback 1 facilityLpbk 2 terminalLpbk	.1.3.6.1.4.1.18070.2.2.1.4.2.1.37
xcvrRemoteId Identifies the remote node and port to which the transceiver port is connected, in the format prescribed by the PSM network management system.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.2.1.38
xcvrRowStatus Used to control the addition and deletion of entries in the Transceiver table, which in turn controls provisioning and deprovisioning of optical transceiver facilities.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.4.2.1.100

This table contains one row for every provisioned active
multiplexer-demultiplexer facility. AMD facilities include AMD
line facilities and AMD channel facilities. Each row contains
a list of attributes that pertain to one facility.

amdEntry row .1.3.6.1.4.1.18070.2.2.1.4.3.1

The conceptual row object of the Active Mux-Demux table.

Indexes

No indexes recorded

Column	Syntax	OID
amdTypeIdxobsolete The specific type of active multiplexer-demultiplexer circuit pack on which the facility is provisioned.	BTI-TC-MIBAmdType Type Values: 1 d32amd1 2 d32amd2 3 d32amd3 4 d32amd4	.1.3.6.1.4.1.18070.2.2.1.4.3.1.1
amdShelfIdxobsolete The number of the shelf on which the active multiplexer-demultiplexer facility is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.3.1.2
amdSlotIdxobsolete The number of the slot within which the active multiplexer-demultiplexer facility is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.3.1.3
amdLineIdxobsolete The number of the multiplexed wavelength line on the AMD circuit pack.	Integer32 Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.4.3.1.4
amdPortIdxobsolete Identifies a specific port on the identified line of the AMD circuit pack.	BTI-TC-MIBAmdPortType Constraints: range: 1-20 Type Values: 1 line 2 channel1 3 channel2 4 channel3 5 channel4 6 channel5 7 channel6 8 channel7 9 channel8 10 channel9 11 channel10 12 channel11 13 channel12 14 channel13 15 channel14 16 channel15 17 channel16 18 channel17 19 channel18 20 channel19 21 channel20 22 channel21 23 channel22 24 channel23 25 channel24 26 channel25 27 channel26 28 channel27 29 channel28 30 channel29 31 channel30 32 channel31 33 channel32 34 expansion	.1.3.6.1.4.1.18070.2.2.1.4.3.1.5
amdOpticalPwrReceivedMinThobsolete This is the optical power received minimum threshold.	dBm/10BTI-TC-MIBFixedX10r/w Constraints: range: 1-4	.1.3.6.1.4.1.18070.2.2.1.4.3.1.6
amdOpticalPwrReceivedMaxThobsolete This is the optical power received maximum threshold.	dBm/10BTI-TC-MIBFixedX10r/w	.1.3.6.1.4.1.18070.2.2.1.4.3.1.7
amdOpticalPwrTransmittedTargetobsolete This is the optical power transmitted target level.	dBm/10BTI-TC-MIBFixedX10r/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.4.3.1.8
amdOpticalAttenuationTargetobsolete This is the optical power attenuation target level.	dB/10BTI-TC-MIBFixedX10r/w Constraints: range: 0-32	.1.3.6.1.4.1.18070.2.2.1.4.3.1.9
amdOpticalPwrReceivedobsolete The optical input power received for the channel.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.3.1.10
amdOpticalPwrTransmittedobsolete The optical power level transmitted for the channel.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.3.1.11
amdOpticalAttentuationobsolete The optical power attenuation for the line.	dB/10BTI-TC-MIBFixedX10 Constraints: range: 1-65536	.1.3.6.1.4.1.18070.2.2.1.4.3.1.12
amdAdminStatusobsolete The administrative status of the AMD port.	BTI-TC-MIBAdminStatusr/w Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.4.3.1.13
amdOperStatusobsolete The reported operational status of the AMD port.	BTI-TC-MIBOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.4.3.1.14
amdOperStatQlfrobsolete This is a textual list of qualifiers about the reported operational status of the AMD port.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.4.3.1.15
amdAutoEnableTimerobsolete Specifies the auto-enable timer for the targeted AMD port. This value only applies if the amdAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutesr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.4.3.1.16
amdActAutoEnableTimerobsolete Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutes Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.4.3.1.17
amdWavelengthobsolete The wavelength transmitted from the AMD port. This object applies only to channel ports.	BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.4.3.1.18
amdId1obsolete Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.3.1.19
amdId2obsolete Textual data recorded by the user to describe the provisioned optical transceiver in a manner useful to the user.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.3.1.20
amdFiberTypeobsolete An optional specification of the fiber type that interfaces to the AMD port.	BTI-TC-MIBFiberTyper/w Type Values: 1 none 2 dsf 3 ndsf 4 nzdsf 5 multimode	.1.3.6.1.4.1.18070.2.2.1.4.3.1.21
amdGridobsolete An optical indication of the WDM grid to which the AMD port link conforms.	BTI-TC-MIBWDMGridr/w Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31 Type Values: 1 none 2 ghz50 3 ghz100 4 ghz200 5 nm20	.1.3.6.1.4.1.18070.2.2.1.4.3.1.22
amdCustom1obsolete A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.3.1.23
amdCustom2obsolete A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-6 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.3.1.24
amdCustom3obsolete A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.3.1.25
amdRowStatusobsolete The active multiplexer-demultiplexer table RowStatus object is not readable or writeable because all entries in the AMD table are automatically created and deleted when the AMD circuit pack is created or deleted. This A…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.4.3.1.100

This table contains one row for each port on every provisioned
passive circuit pack on the NE. Each list contains a list of
attributes that pertain to the passive port.

passivePortEntry row .1.3.6.1.4.1.18070.2.2.1.4.4.1

The conceptual row object of the passive circuit pack port
table.

Indexes

No indexes recorded

Column	Syntax	OID
passivePortCpTypeIdx The type of circuit pack on which the passive port is found.	BTI-TC-MIBCpType Type Values: 1 scp 2 oba 3 ola 4 olam 5 opa 6 smf60 7 smf80 12 pmt1 13 pmt2 14 msi 15 esi 16 cu 17 fllr 18 smf40 20 osc 25 c8md 29 c1adm 32 cdsc 33 d32md1 34 d32md2 35 d32md3 36 d32md4 37 d1adm 38 d2adm 39 d4adm 41 spa 43 oct 44 sba 45 smf30 46 nf 47 wt 48 wr 49 cs 50 smf5 51 smf10 52 smf15 53 smf20 54 d32amd1 55 d32amd2 56 d32amd3 57 d32amd4 58 wm 59 c8md1 60 c8md2 61 mxp 62 c4md 63 c2adm 64 tpr 65 pvx 66 ccm 67 wc200 68 dla 69 rob 70 dcm 71 d40md 72 d96md	.1.3.6.1.4.1.18070.2.2.1.4.4.1.1
passivePortShelfIdx The number of the shelf on which the passive circuit pack port is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.4.1.2
passivePortSlotIdx The number of the slot within which the passive circuit pack port is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.4.1.3
passivePortLineIdx Identifies the multiplexed multi-channel optical facility instance associated with the targeted passive port.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.4.1.4
passivePortTypeIdx Identifies the specific passive port on the circuit pack according to function.	BTI-TC-MIBPassivePortType Constraints: range: 0-32 Type Values: 1 channel1 2 channel2 3 channel3 4 channel4 5 channel5 6 channel6 7 channel7 8 channel8 9 channel9 10 channel10 11 channel11 12 channel12 13 channel13 14 channel14 15 channel15 16 channel16 17 channel17 18 channel18 19 channel19 20 channel20 21 channel21 22 channel22 23 channel23 24 channel24 25 channel25 26 channel26 27 channel27 28 channel28 29 channel29 30 channel30 31 channel31 32 channel32 33 line 34 cband 35 passthru 36 upgrade 37 cwdm 38 dwdm 39 blue 40 red 41 channel53 42 channel55 43 channel57 44 channel59 45 wideband1310	.1.3.6.1.4.1.18070.2.2.1.4.4.1.5
passivePortId1 An optional name used to identify the passive circuit pack port facility.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.4.1.6
passivePortId2 An optional identifier for the passive circuit pack port circuit.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.4.1.7
passivePortFiberType An optional specification of the fiber type interfacing the passive circuit pack port.	BTI-TC-MIBFiberTyper/w Type Values: 1 none 2 dsf 3 ndsf 4 nzdsf 5 multimode	.1.3.6.1.4.1.18070.2.2.1.4.4.1.8
passivePortGrid An optional indication of the DWM grid that the link conforms to.	BTI-TC-MIBWDMGridr/w Type Values: 1 none 2 ghz50 3 ghz100 4 ghz200 5 nm20	.1.3.6.1.4.1.18070.2.2.1.4.4.1.9
passivePortNumChannels An optional indication of the number of channels that the link is carrying. This field does not apply to individual channel type ports.	Integer32r/w	.1.3.6.1.4.1.18070.2.2.1.4.4.1.10
passivePortWavelength An indication of the wavelength that the port is carrying.	BTI-TC-MIBFixedX100	.1.3.6.1.4.1.18070.2.2.1.4.4.1.11
passivePortCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.4.1.12
passivePortCustom2 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.4.1.13
passivePortCustom3 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.4.1.14
passivePortRemoteId Identifies the remote node and port to which the passive card port is connected, in the format prescribed by the PSM network management system.	SNMPv2-TCDisplayStringr/w Enumerated Values: 1 enabled 2 disabled Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.4.1.15
passivePortRowStatus The passive port table RowStatus object is not readable or writeable because all entries in the passive port table are automatically created and deleted when the circuit pack is created or deleted. This passive port row…	SNMPv2-TCRowStatus Enumerated Values: 1 on 2 off Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.4.4.1.100

This table contains one row for every provisioned SONET OC-N
facility on the system. Each row contains a list of attributes
that pertain to the facility.

ocnEntry row .1.3.6.1.4.1.18070.2.2.1.4.5.1

The conceptual row object of the OC-N table.

Indexes

No indexes recorded

Column	Syntax	OID
ocnTypeIdx The specific type of OC-N signal which is provisioned.	BTI-TC-MIBOcnType Type Values: 1 oc1 2 oc3 3 oc12 4 oc48 5 oc192 6 oc768	.1.3.6.1.4.1.18070.2.2.1.4.5.1.1
ocnShelfIdx The number of the shelf on which the OC-N facility is provisioned.	Integer32 Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.18070.2.2.1.4.5.1.2
ocnSlotIdx The number of the slot within which the OC-N facility is provisioned.	Integer32 Enumerated Values: 1 unmapped 2 odu1ToOtu2 3 otu2 4 subOdu1ToOtu1 5 otu1	.1.3.6.1.4.1.18070.2.2.1.4.5.1.3
ocnPortIdx The number of the port on the circuit pack on which the OC-N facility is provisioned.	Integer32	.1.3.6.1.4.1.18070.2.2.1.4.5.1.4
ocnOpticalPwrReceivedMinTh This is the optical power received minimum threshold.	dBm/10BTI-TC-MIBFixedX10 Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.18070.2.2.1.4.5.1.5
ocnOpticalPwrReceivedMaxTh This is the optical power received maximum threshold.	dBm/10BTI-TC-MIBFixedX10 Constraints: range: 1-48	.1.3.6.1.4.1.18070.2.2.1.4.5.1.6
ocnOpticalPwrTransmittedMinTh This is the optical power transmitted minimum threshold.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.5.1.7
ocnOpticalPwrTransmittedMaxTh This is the optical power transmitted maximum threshold.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.5.1.8
ocnOpticalPwrReceived The optical power received on the input of the transceiver.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.5.1.9
ocnOpticalPwrTransmitted The optical power transmitted at the output of the transceiver.	dBm/10BTI-TC-MIBFixedX10	.1.3.6.1.4.1.18070.2.2.1.4.5.1.10
ocnBER The Bit Error Rate measured on the received signal.	BTI-TC-MIBBERType Type Values: 1 none 2 tenExpMinus9 3 tenExpMinus8 4 tenExpMinus7 5 tenExpMinus6 6 tenExpMinus5 7 tenExpMinus4 8 tenExpMinus3 9 tenExpMinus10 10 tenExpMinus11 11 tenExpMinus12	.1.3.6.1.4.1.18070.2.2.1.4.5.1.11
ocnBERTh The Bit Error Rate threshold above which the Signal Degrade condition is raised.	BTI-TC-MIBBERTyper/w Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31 Type Values: 1 none 2 tenExpMinus9 3 tenExpMinus8 4 tenExpMinus7 5 tenExpMinus6 6 tenExpMinus5 7 tenExpMinus4 8 tenExpMinus3 9 tenExpMinus10 10 tenExpMinus11 11 tenExpMinus12	.1.3.6.1.4.1.18070.2.2.1.4.5.1.12
ocnPEC An optionally provisioned Product Equipment Code used to validate the physically present optical transceiver on the OC-N port.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.4.5.1.13
ocnAdminStatus The administrative status of the OC-N facility.	BTI-TC-MIBAdminStatusr/w Constraints: range: 1-2 Type Values: 1 enabled 2 disabled 3 autoEnabled	.1.3.6.1.4.1.18070.2.2.1.4.5.1.14
ocnOperStatus The reported operational status of the OC-N facility.	BTI-TC-MIBOperStatus Constraints: range: 1-192 Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.18070.2.2.1.4.5.1.15
ocnOperStatQlfr This is a textual list of qualifiers about the reported operational status of the OC-N facility.	BTI-TC-MIBOperStatQlfr Type Constraints: range: 1..65	.1.3.6.1.4.1.18070.2.2.1.4.5.1.16
ocnAutoEnableTimer Specifies the auto-enable timer for the targeted OC-N facility. This value only applies if the ocnAdminStatus object is set to autoEnabled. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutesr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.4.5.1.17
ocnActAutoEnableTimer Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.	BTI-TC-MIBHoursAndMinutes Type Constraints: range: 0..7	.1.3.6.1.4.1.18070.2.2.1.4.5.1.18
ocnWavelength The wavelength to be transmitted by the transceiver on the OC-N facility port. This is a mandatory object when a row of the OC-N table is created.	BTI-TC-MIBFixedX100r/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.19
ocnVendorPN1 An optionally provisioned part number used to validate the optical transceiver on the OC-N facility port.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.20
ocnVendorPN2 An optionally provisioned part number used to validate the optical transceiver on the OC-N facility port.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.21
ocnVendorPN3 An optionally provisioned part number used to validate the optical transceiver on the OC-N facility port.	OctetStringr/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.22
ocnPhyPMMon Indicates if the OC-N facility is configured to report threshold crossing conditions for physical layer performance monitoring parameters.	Enumerationr/w Constraints: range: 1-1 range: 11-11 range: 21-21 range: 31-31	.1.3.6.1.4.1.18070.2.2.1.4.5.1.23
ocnLaserStatus An indication of the operational status of the transceiver laser on the OC-N facility port.	Enumeration Constraints: range: 1-20	.1.3.6.1.4.1.18070.2.2.1.4.5.1.24
ocnId1 Textual data recorded by the user to describe the provisioned OC-N facility in a manner useful to the user.	OctetStringr/w Constraints: range: 1-6	.1.3.6.1.4.1.18070.2.2.1.4.5.1.25
ocnFiberType An optional specification of the fiber type that interfaces to the OC-N facility port.	BTI-TC-MIBFiberTyper/w Type Values: 1 none 2 dsf 3 ndsf 4 nzdsf 5 multimode	.1.3.6.1.4.1.18070.2.2.1.4.5.1.26
ocnCustom1 A variable length text string for operating company use.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.5.1.27
ocnTOHTransparency Used to configure whether the transport overhead of the the SONET OC-N facility is to be handled transparently or if it is to be terminated and regenerated. This object only applies to OC-48 client facilities on the 10G…	Enumerationr/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.28
ocnLineMapping Used to configure the OTN configuration of the line port. If set to unmapped, there is no OTN digital wrapper added to the OC-192 or OC-48 facility. The odu1ToOtu2 and otu2 mapping is applicable to OC-19…	Enumerationr/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.29
ocnProtSwEvtType Indicates the type of protection switching event that has occured on an OC-N facility.	BTI-TC-MIBProtSwEvtType Type Values: 1 autoWorkSwProt 2 autoWorkSwBack 3 manWorkSwProt 4 manWorkSwBack 5 frcdWorkSwProt 6 frcdWorkSwBack 7 lockoutOfWork 8 lockoutOfProt 9 releaseProtSw	.1.3.6.1.4.1.18070.2.2.1.4.5.1.30
ocnDCCTransparency Used to configure whether the Data Communications Channel (DCC) is transported transparently through the circuit pack. Specifically, this refers to the D1, D2 and D3 section DCC bytes. This object only applies to OC-48 …	Enumerationr/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.31
ocnTransparencyChannel Used to configure the STS1 channel number on which the DCC is transported. This object only applies to OC-48 client facilities on the 10G MXP circuit pack and the OC-12 client facilities on the 8-port 2.5G MXP circuit…	Integer32r/w	.1.3.6.1.4.1.18070.2.2.1.4.5.1.32
ocnRemoteId Identifies the remote node and port to which the OC-n port is connected, in the format prescribed by the PSM network management system.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.18070.2.2.1.4.5.1.33
ocnRowStatus Used to control the addition and deletion of entries in the OC-N table, which in turn controls provisioning and deprovisioning of OC-N facilities.	SNMPv2-TCRowStatusr/w Constraints: range: 0-32 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.18070.2.2.1.4.5.1.100