BSUSTATUS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
11

aniBsuStatusRadioTable

table
.1.3.6.1.4.1.4325.3.1.11 · 1 row entry · 11 columns
Open in standard view
Uses the aperto variant from /opt/observium/mibs/aperto.
Command help
Walk aniBsuStatusRadioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BSUSTATUS-MIB' -M '/opt/observium/mibs/aperto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BSUSTATUS-MIB::aniBsuStatusRadioTable' 
This table shows the status of each radio that is 
connected to the BSU. The radio has to be operational
for information to be displayed. The radio status is
shown on a per wireless port basis.
aniBsuStatusRadioEntry row .1.3.6.1.4.1.4325.3.1.11.1
An entry with objects that provide information
for each radio connected to the BSU.
Indexes
Column Syntax OID
aniBsuStatusRadioSerialNum
The serial number of the radio board.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.4325.3.1.11.1.1
aniBsuStatusRadioFrequency
The radio frequency in MHz.
MHzSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4325.3.1.11.1.2
aniBsuStatusRadioBand
The radio frequency band.
Enumeration
Enumerated Values:
1unii-5-3GHz
2unii-5-8GHz
3general-5-8GHz
4mmds-2-6GHz
5general-2-6GHz
6general-3-5GHz
7etsi-3-5GHz-50
8etsi-3-5GHz-100
10ism-5-8GHz
11fdd-3-5GHz
12general-5-3GHz
 .1.3.6.1.4.1.4325.3.1.11.1.3
aniBsuStatusRadioEepromRev
The radio EEPROM content revision number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4325.3.1.11.1.4
aniBsuStatusRadioVRFlag
The status of the voltage regulator.
Enumeration
Enumerated Values:
1operational
2not-operational
 .1.3.6.1.4.1.4325.3.1.11.1.5
aniBsuStatusRadioSynth1Lock
The status of the radio synthesizer 1 lock.
Enumeration
Enumerated Values:
1not-locked
2locked
 .1.3.6.1.4.1.4325.3.1.11.1.6
aniBsuStatusRadioSynth2Lock
The status of the radio synthesizer 1 lock.
Enumeration
Enumerated Values:
1not-locked
2locked
 .1.3.6.1.4.1.4325.3.1.11.1.7
aniBsuStatusRadioTxGain
The radio transmit gain in dB.
dBSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4325.3.1.11.1.8
aniBsuStatusRadioRxGain
The radio receive gain in dB.
dBInteger32
Constraints:
range: 30-45
 .1.3.6.1.4.1.4325.3.1.11.1.9
aniBsuStatusRadioCurrentTxMaxPower
The radio current transmit maxium power in dBm
dBmSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4325.3.1.11.1.10
aniBsuStatusRadioIfCableLoss
The calculated IF cable loss in dB
dBSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4325.3.1.11.1.11