BROCADE-MPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
44

bcsiMplsAdminGroupTable

table
.1.3.6.1.4.1.1588.3.1.10.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk bcsiMplsAdminGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BROCADE-MPLS-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BROCADE-MPLS-MIB::bcsiMplsAdminGroupTable' 
List of administrative groups (by ID) that have a configured group name.
bcsiMplsAdminGroupEntry row .1.3.6.1.4.1.1588.3.1.10.1.1.2.1
Information about an administrative group entry.
Indexes
Column Syntax OID
bcsiMplsAdminGroupId
Identifies the administrative group ID in 1-based.
The end user of this object must convert this to 0-based since this
maps to the bit position in the constraint-based link selection.
Unsigned32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1588.3.1.10.1.1.2.1.1
bcsiMplsAdminGroupName
The group name that this administrative group is associated with.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.1588.3.1.10.1.1.2.1.2
bcsiMplsAdminGroupRowStatus
The row status of an entry.
Note: Set request to this table is not supported in this release.
Always returns 'active' for the existing entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1588.3.1.10.1.1.2.1.3

bcsiMplsInterfaceTable

table
.1.3.6.1.4.1.1588.3.1.10.1.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk bcsiMplsInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BROCADE-MPLS-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BROCADE-MPLS-MIB::bcsiMplsInterfaceTable' 
List of MPLS-enabled Interfaces.
bcsiMplsInterfaceEntry row .1.3.6.1.4.1.1588.3.1.10.1.1.3.1
Information about an MPLS interface entry.
Indexes
Column Syntax OID
bcsiMplsInterfaceIndex
The ifIndex of the MPLS-enabled port or VE interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.1.3.1.1
bcsiMplsInterfaceAdminGroup
Specifies which administrative groups this MPLS-enabled
interface belongs to.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.1.3.1.2
bcsiMplsInterfaceRowStatus
The row status of an entry.
Note: Set request to this table is not supported in this release.
Always returns 'active' for the existing entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1588.3.1.10.1.1.3.1.3

bcsiMplsLspTable

table
.1.3.6.1.4.1.1588.3.1.10.1.2.3 · 1 row entry · 38 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk bcsiMplsLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BROCADE-MPLS-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BROCADE-MPLS-MIB::bcsiMplsLspTable' 
List of Configured Label Switched Paths.
bcsiMplsLspEntry row .1.3.6.1.4.1.1588.3.1.10.1.2.3.1
Entry containing information about a particular
Label Switched Path.
Indexes
Column Syntax OID
bcsiMplsLspSignalingProto
MPLS signaling protocol used by this LSP.
Enumeration
Enumerated Values:
1ldp
2rsvp
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.1
bcsiMplsLspIndex
The unique index of the LSP in the system for a given signaling protocol.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.2
bcsiMplsLspName
Name of the Label Switched Path.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.3
bcsiMplsLspState
The operational state of the LSP.
Enumeration
Enumerated Values:
1unknown
2up
3down
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.4
bcsiMplsLspPackets
The number of egress Layer-3 VPN and IPoMPLS packets
meeting the in-label and tunnel criteria.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.5
bcsiMplsLspAge
The age, since creation of this LSP in 10-millisecond periods.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.6
bcsiMplsLspTimeUp
The total time in 10-millisecond units that this
LSP has been operational. The percentage up time
can be determined by computing
(bcsiMplsLspTimeUp/bcsiMplsLspAge * 100 %).
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.7
bcsiMplsLspPrimaryTimeUp
The total time in 10-millisecond units that this
LSP's primary path has been operational. The
percentage contribution of the primary
path to the operational time is given by
(bcsiMplsLspPrimaryTimeUp/bcsiMplsLspTimeUp *…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.8
bcsiMplsLspTransitions
The number of state transitions (up -> down and
down -> up) this LSP has undergone.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.9
bcsiMplsLspLastTransition
The time in 10-millisecond units since the last
transition occurred on this LSP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.10
bcsiMplsLspFrom
Source IP address of this LSP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.11
bcsiMplsLspTo
Destination IP address of this LSP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.12
bcsiMplsLspPathName
The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in bcsiMplsLspEntry are meaningless.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.13
bcsiMplsLspPathType
The type of path that is active, i.e., a
primary path, a standby path, or a generic
secondary path. This field is meaningless
unless bcsiMplsLspPathName is not empty
Enumeration
Enumerated Values:
1other
2primary
3standby
4secondary
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.14
bcsiMplsLspAdaptive
Indicates if the LSP supports adaptive mechanism or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.15
bcsiMplsLspBfdSessionId
The BFD session ID associated to this LSP. Zero indicates
there is no BFD session for this LSP. Non-zero value is an
index to an entry in the bfdSessTable
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.16
bcsiMplsLspReoptimizeTimer
The number of seconds from the beginning of one reoptimization
attempt to the beginning of the next attempt.
Unsigned32
Constraints:
range: 0-0
range: 300-65535
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.17
bcsiMplsLspCoS
The Class of Service for this LSP.
ClassOfService
Type Constraints:
range: 0..7
range: 255
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.18
bcsiMplsLspHopLimit
The number of hops this LSP can traverse.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.19
bcsiMplsLspCspf
Indicates if CSPF path calculation is enabled
on this LSP.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.20
bcsiMplsLspCspfTieBreaker
The tie-breaker to use for selecting CSPF
equal-cost paths. The value of this variable is
meaningless if the bcsiMplsLspCspf is 'disabled'.
Enumeration
Enumerated Values:
1random
2leastFill
3mostFill
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.21
bcsiMplsLspFrrMode
Indicates which protection method is to be used
for Fast Reroute. 'detour' means one-to-one backup
and 'facility' for facility backup.
Enumeration
Enumerated Values:
1none
2detour
3facility
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.22
bcsiMplsLspFrrSetupPriority
The setup priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.23
bcsiMplsLspFrrHoldingPriority
The hold priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.24
bcsiMplsLspFrrHopLimit
The hop limit for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.25
bcsiMplsLspFrrBandwidth
The bandwidth constraint for MPLS Fast Reroute.
The value 0 means that the detour route uses a
best-effort value for bandwidth.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.26
bcsiMplsLspFrrAdmGrpIncludeAny
The administrative group setting that the device
includes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variable is meaningless if the
bcsiMplsLspFrrM…
MPLS-TC-STD-MIBMplsTunnelAffinity
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.27
bcsiMplsLspFrrAdmGrpIncludeAll
The administrative group setting that an interface
must be a member of to be considered in a detour
route for the LSP. Any interface that is not a member
of all the groups is eliminated from consideration.
The value of …
MPLS-TC-STD-MIBMplsTunnelAffinity
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.28
bcsiMplsLspFrrAdmGrpExcludeAny
The administrative group setting that the device
excludes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variable is meaningless if the
bcsiMplsLspFrrM…
MPLS-TC-STD-MIBMplsTunnelAffinity
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.29
bcsiMplsLspPathSelectMode
Indicates the path selection mode to use.
Auto-select is the default mode. I this mode, the
primary path is always selected to carry traffic when
the primary path has stayed operating in the working
state for at least t…
Enumeration
Enumerated Values:
1auto
2manual
3unconditional
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30
bcsiMplsLspPathSelectPathname
The user-selected pathname when the bcsiMplsLspPathSelectMode
is either 'manual' or 'unconditional'.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.31
bcsiMplsLspPathSelectRevertTimer
The number of seconds to wait after the primary or selected
path comes up before traffic reverts to that path.
A value of 0 indicates that it will switch immediately
after the current working path goes down.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32
bcsiMplsLspShortcutOspfAllowed
Indicates that this LSP allows shortcut between nodes in an AS.
OSPF includes the LSP in its SPF calculation.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.33
bcsiMplsLspShortcutIsisAllowed
Indicates that this LSP allows shortcut through the
network to a destination based on the path's cost (metric).
Traffic is forwarded through this LSP to destinations
within the IS-IS routing domain. IS-IS includes the L…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.34
bcsiMplsLspShortcutIsisLevel
Indicates the level of IS-IS routing enabled on the device.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAllowed is 'false'.
Enumeration
Enumerated Values:
1level1
2level2
3level1and2
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.35
bcsiMplsLspShortcutIsisAnnounce
Indicates that this IS-IS shortcut will be announced or
advertised. The metric to announce is specified by
bcsiMplsLspShortcutIsisAnnounceMetric.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisA…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.36
bcsiMplsLspShortcutIsisAnnounceMetric
Indicates the metric value to announce for this shortcut.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAnnounce is 'false'. Default value is 10.
Integer32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.37
bcsiMplsLspShortcutIsisRelativeMetric
Indicates the relative metric used to compute the LSP cost
when announce is not enabled.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAllowed is 'false'.
Integer32
Constraints:
range: -16777215-16777215
 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.38