BLADETYPE2-TRAP-MIB

Imported Objects

ipCurCfgGwIndex, ipCurCfgGwAddr, vrrpCurCfgVirtRtrIndx, vrrpCurCfgVirtRtrAddr, vrrpCurCfgIfIndx, vrrpCurCfgIfPasswdBLADETYPE2-NETWORK-MIB
stgCurCfgIndexBLADETYPE2-PHYSICAL-MIB
agSlotNumber, agRackId, agChassisBLADETYPE2-SWITCH-MIB
hpSwitchBladeType2-MgmtHP-SWITCH-PL-MIB
TRAP-TYPERFC-1215
sysName, sysLocation, sysContact, DisplayStringRFC1213-MIB

Objects

bt2Traps .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7
bt2SwTrapDisplayString .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.1000

Notifications/Traps

NameOIDDescription
bt2SwPrimaryPowerSupplyFailure




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.1
A bt2SwPrimaryPowerSupplyFailure trap signifies that the 
primary power supply failed.
bt2SwVrrpNewMaster





.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.16
The bt2SwVrrpNewMaster trap indicates that the sending agent
has transitioned to 'Master' state.
bt2SwVrrpNewBackup




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.17
The bt2SwVrrpNewBackup trap indicates that the sending agent
has transitioned to 'Backup' state.
bt2SwVrrpAuthFailure





.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.18
A bt2SwVrrpAuthFailure trap signifies that a packet has
been received from a router whose authentication key
or authentication type conflicts with this router's
authentication key or authentication type. Implementation
of this trap is optional.
bt2SwLoginFailure




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.19
A bt2SwLoginFailure trap signifies that someone failed to
enter a valid username/password combination.
bt2SwDefGwUp




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.2
A bt2SwDefGwUp trap signifies that the default
gateway is alive.
bt2SwTempExceedThreshold




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.22
A bt2SwTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits.
bt2SwRackLocationChange




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.26
A bt2SwRackLocationChange trap signifies that the rack 
location has been changed.
bt2SwApplyComplete




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.27
A bt2SwApplyComplete signifies that new configuration
has been applied.
bt2SwSaveComplete




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.28
A bt2SwApplyComplete signifies that new configuration
has been saved.
bt2SwFwDownloadSucess




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.29
A bt2SwFwDownloadSuccess signifies that firmware
has been downloaded to [image1|image2|boot image].
bt2SwDefGwDown




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.3
A bt2SwDefGwDown trap signifies that the default
gateway is down.
bt2SwFwDownloadFailure.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.30
A bt2SwFwDownloadFailure signifies that firmware 
downloaded failed to [image1|image2|boot image].
bt2SwTempReturnThreshold.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.31
A bt2SwTempReturnThreshold trap signifies that the
switch temperature has returned below maximum safety limits.
bt2SwFanFailure.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.32
A bt2SwFanFailure trap signifies that the
fan failure has been detected.
bt2SwFanFailureFixed.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.33
A bt2SwFanFailureFixed trap signifies that the
fan failure has been fixed.
bt2SwUfdfoLtMFailure.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.34
A bt2SwUfdfoLtMFailure trap signifies that a LtM link is down.
bt2SwUfdfoLtMUP.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.35
A bt2SwUfdfoLtMUP trap signifies that a LtM link is up.
bt2SwUfdfoGlobalEna.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.36
A bt2SwUfdfoGlobalEna trap signifies that Global UFD is enabled.
bt2SwUfdfoGlobalDis.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.37
A bt2SwUfdfoGlobalDis trap signifies that Global UFD is disabled.
bt2SwUfdfoLtDAutoEna.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.38
A bt2SwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
bt2SwUfdfoLtDAutoDis.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.39
A bt2SwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
bt2SwDefGwInService




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.4
A bt2SwDefGwEnabled trap signifies that the default
gateway is up and in service.
bt2SwCubeInserted.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.40
A Cube was inserted.
bt2SwCubeRemoved.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.41
A Cube was removed.
bt2SwStgNewRoot.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.42
A bt2SwStgNewRoot trap signifies that the bridge has become the new root of the STG.
bt2SwCistNewRoot.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.43
A bt2SwCistNewRoot trap signifies that the bridge has become the new root of the CIST.
bt2SwStgTopologyChanged.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.44
A bt2SwStgTopologyChanged trap signifies that there was a STG topology change.
bt2SwCistTopologyChanged.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.45
A bt2SwCistTopologyChanged trap signifies that there was a CIST topology change.
bt2SwHotlinksMasterUp.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.46
A bt2SwHotlinksMasterUp trap signifies that the Master interface is active.
bt2SwHotlinksMasterDn.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.47
A bt2SwHotlinksMasterDn trap signifies that the Master interface is not active.
bt2SwHotlinksBackupUp.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.48
A bt2SwHotlinksBackupUp trap signifies that the Backup interface is active.
bt2SwHotlinksBackupDn.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.49
A bt2SwHotlinksBackupDn trap signifies that the Backup interface is not active.
bt2SwDefGwNotInService




.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.5
A bt2SwDefGwDisabled trap signifies that the default
gateway is alive but not in service.
bt2SwHotlinksNone.1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.50
A bt2SwHotlinksNone trap signifies that there are no active interfaces.