BLADETYPE2-SWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
24
Rows
24
Columns
159

agPortCurCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2 · 1 row entry · 19 columns
Open in standard view 
The table of port configuration in the current_configuration block.
agPortCurCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1
A row in the port table in the current_configuration block.
Indexes
agPortCurCfgIndx
Column Syntax OID
agPortCurCfgIndx
The index of the row in port configurations table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.1
agPortCurCfgState
This is the state of the port.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.2
agPortCurCfgVlanTag
This is VLAN tag state of the port
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.3
agPortCurCfgStp
This object is used to turn Spanning Tree on or off for the port.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.4
agPortCurCfgRmon
This object is used to turn RMON on or off on the port.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.5
agPortCurCfgPVID
The default VLAN ID for the port.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.6
agPortCurCfgGigEthAutoNeg
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.11
agPortCurCfgGigEthSpeed
Selects the port speed for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.12
agPortCurCfgGigEthMode
This object is used to select port mode for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
4full-or-half-duplex
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.13
agPortCurCfgGigEthFctl
This object is used to select port flow control for
gigabit Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.14
agPortCurCfgPortName
The switch port name.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.15
agPortCurCfgLinkTrap
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.18
agPortCurCfgTagPVID
This is PVID tag state of the port
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.19
agPortCurCfgMulticastThreshold
Current status of the port's Multicast Threshold.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.20
agPortCurCfgMulticastThresholdRate
Current port's Multicast Threshold Rate.
Integer32
Constraints:
range: 0-262143
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.21
agPortCurCfgBroadcastThreshold
Current status of the port's Broadcast Threshold.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.22
agPortCurCfgBroadcastThresholdRate
Current port's Broadcast Threshold Rate.
Integer32
Constraints:
range: 0-262143
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.23
agPortCurCfgDLFThreshold
Current status of the port's Destination Lookup Fail Threshold.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.24
agPortCurCfgDLFThresholdRate
Current port's Destination Lookup Fail Threshold Rate.
Integer32
Constraints:
range: 0-262143
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.25

agPortFiberCurCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2 · 1 row entry · 5 columns
Open in standard view 
The table of fiber port configuration in the current_configuration block.
agPortFiberCurCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1
A row in the fiber port table in the current_configuration block.
Indexes
agPortFiberCurCfgIndx
Column Syntax OID
agPortFiberCurCfgIndx
The index of the row in fiber port current configuration table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.1
agPortFiberCurCfgTxCtrl
This is the state of the TX control.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.2
agPortFiberCurCfgTxPulse
This is the state of the TX pulse.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.3
agPortFiberCurCfgTxUp
Current TX up time.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.4
agPortFiberCurCfgTxDn
Current TX dn time.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.5

agPortNewCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3 · 1 row entry · 19 columns
Open in standard view 
The table of port configuration in the new_configuration block.
agPortNewCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1
A row in the port configuration table in the new_configuration block.
Indexes
agPortNewCfgIndx
Column Syntax OID
agPortNewCfgIndx
The index of the row in port configurations table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.1
agPortNewCfgState
This is the state of the port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.2
agPortNewCfgVlanTag
This is VLAN tag state of the port
Enumerationr/w
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.3
agPortNewCfgStp
This object is used to turn Spanning Tree on or off for the port.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.4
agPortNewCfgRmon
This object is used to turn RMON on or off on the port.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.5
agPortNewCfgPVID
The default VLAN ID for the port.
Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.6
agPortNewCfgGigEthAutoNeg
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.11
agPortNewCfgGigEthSpeed
Selects the port speed for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.12
agPortNewCfgGigEthMode
This object is used to select port mode for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2full-duplex
3half-duplex
4full-or-half-duplex
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.13
agPortNewCfgGigEthFctl
This object is used to select port flow control for
gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.14
agPortNewCfgPortName
The switch port name.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.15
agPortNewCfgLinkTrap
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.18
agPortNewCfgTagPVID
This is PVID tag state of the port
Enumerationr/w
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.19
agPortNewCfgMulticastThreshold
New status of the port's Multicast Threshold.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.20
agPortNewCfgMulticastThresholdRate
New port's Multicast Threshold Rate.
Integer32r/w
Constraints:
range: 0-262143
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.21
agPortNewCfgBroadcastThreshold
New status of the port's Broadcast Threshold.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.22
agPortNewCfgBroadcastThresholdRate
New port's Broadcast Threshold Rate.
Integer32r/w
Constraints:
range: 0-262143
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.23
agPortNewCfgDLFThreshold
New status of the port's Destination Lookup Fail Threshold.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.24
agPortNewCfgDLFThresholdRate
New port's Destination Lookup Fail Threshold Rate.
Integer32r/w
Constraints:
range: 0-262143
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.25

agPortFiberNewCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2 · 1 row entry · 5 columns
Open in standard view 
The table of fiber port configuration in the new_configuration block.
agPortFiberNewCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1
A row in the fiber port table in the new_configuration block.
Indexes
agPortFiberNewCfgIndx
Column Syntax OID
agPortFiberNewCfgIndx
The index of the row in fiber port new configuration table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.1
agPortFiberNewCfgTxCtrl
New TX control.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.2
agPortFiberNewCfgTxPulse
New TX pulse.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.3
agPortFiberNewCfgTxUp
New TX up time.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.4
agPortFiberNewCfgTxDn
New TX dn time.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.5

agSyslogMsgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11 · 1 row entry · 2 columns
Open in standard view 
The table of syslog messages.
agSyslogMsgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1
A syslog message stored on the switch.
Indexes
agSyslogMsgIndex
Column Syntax OID
agSyslogMsgIndex
The syslog message table index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.1
agSyslogMessage
The syslog message.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.2

agCurCfgTrapHostTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2 · 1 row entry · 3 columns
Open in standard view 
The table of trap hosts which to send SNMP traps in the 
current_configuration block.
agCurCfgTrapHostEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1
A row in the trap host table in the current_configuration block.
Indexes
agCurCfgTrapHostIndx
Column Syntax OID
agCurCfgTrapHostIndx
The index of the row in trap host table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.1
agCurCfgTrapHostIpAddr
The IP address of a trap host.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.2
agCurCfgTrapHostCommString
The SNMP community string to use with the trap host
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.3

agNewCfgTrapHostTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3 · 1 row entry · 3 columns
Open in standard view 
The table of trap hosts which to send SNMP traps in the
new_configuration block.
agNewCfgTrapHostEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1
A row in the trap host table in the new_configuration block.
Indexes
agNewCfgTrapHostIndx
Column Syntax OID
agNewCfgTrapHostIndx
The index of the row in trap host table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.1
agNewCfgTrapHostIpAddr
The IP address of a trap host.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.2
agNewCfgTrapHostCommString
The SNMP community string to use with the trap host
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.3

agApplyTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5 · 1 row entry · 2 columns
Open in standard view 
The table of URL path for URL load balancing in the current_config.
agApplyTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1
Information about an URL path for URL load balancing.
Indexes
agApplyIndex
Column Syntax OID
agApplyIndex
The table index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.1
agApplyString
A string in the apply table.
OctetString .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.2

agTacacsUserMapCurCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31 · 1 row entry · 2 columns
Open in standard view 
The table of tacacs+ user map current configuration.
agTacacsUserMapCurCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1
A row in the tacacs+ user mapping table.
Indexes
agTacacsUserMapCurCfgUId
Column Syntax OID
agTacacsUserMapCurCfgUId
The current config remote privilege identifier.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.1
agTacacsUserMapCurCfgMapping
Current Tacacs+ user privilege mappings.
Enumeration
Enumerated Values:
0invalid
1user
2oper
3admin
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.2

agTacacsUserMapNewCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32 · 1 row entry · 2 columns
Open in standard view 
The table of tacacs+ user map new configuration.
agTacacsUserMapNewCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1
A row in the tacacs+ user mapping table.
Indexes
agTacacsUserMapNewCfgUId
Column Syntax OID
agTacacsUserMapNewCfgUId
The new config remote privilege identifier.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.1
agTacacsUserMapNewCfgMapping
Set new Tacacs+ user privilege mappings.
Enumerationr/w
Enumerated Values:
0invalid
1user
2oper
3admin
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.2

agCurCfgMgmtNetTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2 · 1 row entry · 3 columns
Open in standard view 
The table for Management Network definitions
in the current configuration block.
agCurCfgMgmtNetEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1
A row in the management network definition table.
Indexes
agCurCfgMgmtNetIndex
Column Syntax OID
agCurCfgMgmtNetIndex
The index of the Management Network Definition table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.1
agCurCfgMgmtNetSubnet
The Management Network Address in the current_configuration
block.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.2
agCurCfgMgmtNetMask
The Management Network Mask in the current_configuration
block.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.3

agNewCfgMgmtNetTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3 · 1 row entry · 4 columns
Open in standard view 
The table for Management Network definitions
in the new configuration block.
agNewCfgMgmtNetEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1
A row in the management network definition table.
Indexes
agNewCfgMgmtNetIndex
Column Syntax OID
agNewCfgMgmtNetIndex
The index of the Management Network Definition table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.1
agNewCfgMgmtNetSubnet
The Management Network Address in the new_configuration
block.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.2
agNewCfgMgmtNetMask
The Management Network Mask in the new_configuration
block.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.3
agNewCfgMgmtNetDelete
By setting the value to delete(2), the entire row is deleted.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.4

agAccessUserCurCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2 · 1 row entry · 5 columns
Open in standard view 
The table of Access user configuration.
agAccessUserCurCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1
A row in the Access user configuration table.
Indexes
agAccessUserCurCfgUId
Column Syntax OID
agAccessUserCurCfgUId
The User identifier.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.1
agAccessUserCurCos
The user class of service.
Enumeration
Enumerated Values:
0user
3oper
6admin
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.2
agAccessUserCurCfgName
The user name.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.3
agAccessUserCurCfgPswd
The character string representing the user passworde.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.4
agAccessUserCurCfgState
Enable or disable a user.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.5

agAccessUserNewCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3 · 1 row entry · 6 columns
Open in standard view 
The table of Access user configuration.
agAccessUserNewCfgTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1
A row in the Access user configuration table.
Indexes
agAccessUserNewCfgUId
Column Syntax OID
agAccessUserNewCfgUId
The User identifier.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.1
agAccessUserNewCos
The user class of service.
Enumerationr/w
Enumerated Values:
0user
3oper
6admin
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.2
agAccessUserNewCfgName
The user name.
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.3
agAccessUserNewCfgPswd
The character string representing the user passworde.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.4
agAccessUserNewCfgState
Enable or disable a user.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.5
agAccessUserNewCfgDelete
This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.6

portStatsTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1 · 1 row entry · 18 columns
Open in standard view 
The table of port statistics.
portStatsTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1
A row in the port stats table.
Indexes
portStatsIndx
Column Syntax OID
portStatsIndx
The port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.1
portStatsPhyIfInOctets
The total number of octets received on the
interface, including framing characters.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.2
portStatsPhyIfInUcastPkts
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.3
portStatsPhyIfInNUcastPkts
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.4
portStatsPhyIfInDiscards
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.5
portStatsPhyIfInErrors
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.6
portStatsPhyIfInUnknownProtos
The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.7
portStatsPhyIfOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.8
portStatsPhyIfOutUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.9
portStatsPhyIfOutNUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.10
portStatsPhyIfOutDiscards
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.11
portStatsPhyIfOutErrors
The number of outbound packets that could not be
transmitted because of errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.12
portStatsPhyIfOutQLen
The length of the output packet queue (in
packets).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.13
portStatsPhyIfInBroadcastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.15
portStatsClear
Setting this value to clear(1) clears the stats for this port.
Enumerationr/w
Enumerated Values:
1clear
2ok
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.16
portStatsPhyIfInMulticastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.17
portStatsPhyIfOutMulticastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.18

dot1xPortStatsTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2 · 1 row entry · 31 columns
Open in standard view 
The table of 802.1x port statistics.
dot1xPortStatsTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1
A row in the 802.1x port stats table.
Indexes
dot1xPortStatsIndx
Column Syntax OID
dot1xPortStatsIndx
The 802.1x port stats index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.1
eapolFramesRx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.2
eapolFramesTx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.3
eapolStartFramesRx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.4
eapolLogoffFramesRx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.5
eapolRespIdFramesRx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.6
eapolRespFramesRx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.7
eapolReqIdFramesTx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.8
eapolReqFramesTx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.9
invalidEapolFramesRx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.10
eapLengthErrorFramesRx SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.11
authEntersConnecting SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.12
authEapLogoffsWhileConnecting SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.13
authEntersAuthenticating SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.14
authSuccessesWhileAuthenticating SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.15
authTimeoutsWhileAuthenticating SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.16
authFailWhileAuthenticating SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.17
authReauthsWhileAuthenticating SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.18
authEapStartsWhileAuthenticating SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.19
authEapLogoffWhileAuthenticating SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.20
authReauthsWhileAuthenticated SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.21
authEapStartsWhileAuthenticated SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.22
authEapLogoffWhileAuthenticated SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.23
backendResponses SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.24
backendAccessChallenges SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.25
backendOtherRequestsToSupplicant SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.26
backendNonNakResponsesFromSupplicant SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.27
backendAuthSuccesses SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.28
backendAuthFails SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.29
lastEapolFrameVersion SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.30
lastEapolFrameSource SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.31

aclPortStatsTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1 · 1 row entry · 3 columns
Open in standard view 
The table of aclPort statistics.
aclPortStatsTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1
A row in the aclPort stats table.
Indexes
aclPortStatsIndx
Column Syntax OID
aclPortStatsIndx
The aclPort index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.1
aclPortStatsHits
Total number of hits for this ACL entry on given port
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.2
aclPortClearStats
Setting this value to clear(2) clears the stats for the ACL.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.3

aclMeterPortStatsTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1 · 1 row entry · 3 columns
Open in standard view 
The table of aclMeterPort statistics.
aclMeterPortStatsTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1
A row in the aclMeterPort stats table.
Indexes
aclMeterPortStatsIndx
Column Syntax OID
aclMeterPortStatsIndx
The aclMeterPort index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.1
aclMeterPortStatsHits
Total number of hits for this ACL Meter entry on given port
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.2
aclMeterPortClearStats
Setting this value to clear(2) clears the stats for the ACL meter.
Enumerationr/w
Enumerated Values:
1ok
2clear
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.3

portInfoTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1 · 1 row entry · 11 columns
Open in standard view 
The table of port information.
portInfoTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1
A row in the port information table.
Indexes
portInfoIndx
Column Syntax OID
portInfoIndx
The port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.1
portInfoSpeed
The current operational speed of the port.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.2
portInfoMode
The current operational mode of the port.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.3
portInfoFlowCtrl
The current operational flow control of the port.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.4
portInfoLink
The current operational link status of the port.
Enumeration
Enumerated Values:
1up
2down
3disabled
4inoperative
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.5
portInfoPhyIfDescr
A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.6
portInfoPhyIfType
The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.
Enumeration
Enumerated Values:
1other
2regular1822
3hdh1822
4ddn-x25
5rfc877-x25
6ethernet-csmacd
7iso88023-csmacd
8iso88024-tokenBus
9iso88025-tokenRing
10iso88026-man
11starLan
12proteon-10Mbit
13proteon-80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet-3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frame-relay
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.7
portInfoPhyIfMtu
The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.8
portInfoPhyIfPhysAddress
The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet str…
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.9
portInfoPhyIfOperStatus
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.10
portInfoPhyIfLastChange
The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.11

agDiffTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4 · 1 row entry · 2 columns
Open in standard view 
The table of URL path for URL load balancing in the current_config.
agDiffTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1
Information about an URL path for URL load balancing.
Indexes
agDiffIndex
Column Syntax OID
agDiffIndex
The table index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.1
agDiffString
A string in the diff table.
OctetString .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.2

agCfgDumpTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4 · 1 row entry · 2 columns
Open in standard view 
The table of dump strings.
agCfgDumpTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1
An entry in the dump table.
Indexes
agCfgDumpIndex
Column Syntax OID
agCfgDumpIndex
The table index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.1
agCfgDumpString
A string in the dump table.
OctetString .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.2

geaportInfoTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1 · 1 row entry · 3 columns
Open in standard view 
The table of gea port mapping.
geaportInfoTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1
An entry in the geaport table mapping.
Indexes
geaportInfoLogicalIndex
Column Syntax OID
geaportInfoLogicalIndex
The logical port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.1
geaportInfoPort
The GEA Port (0-based).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.2
geaportInfoUnit
The GEA Unit.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.3

agPortOperTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1 · 1 row entry · 3 columns
Open in standard view 
The table of port operations.
agPortOperTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1
A row in the port operations table.
Indexes
portOperIdx
Column Syntax OID
portOperIdx
The port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.1
portOperState
Enable/Disable port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.2
portOperRmon
Enable/Disable RMON for port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.3

portOperDot1xTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2 · 1 row entry · 3 columns
Open in standard view 
The table of port operations.
portOperDot1xTableEntry entry .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1
A row in the port 802.1x operation table.
Indexes
portOperDot1xIndx
Column Syntax OID
portOperDot1xIndx
The port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.1
portOperDot1xReset
Reinitialize 802.1x access control on port.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.2
portOperDot1xReauth
Initiate reauthentication on port.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.3