BIANCA-BRICK-X25TOTCP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
27
.1.3.6.1.4.1.272.4.6.9
·
1 row entry
·
27 columns
Uses the bintec variant from
Command help
/opt/observium/mibs/bintec.
Walk x25ToTcpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25TOTCP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25TOTCP-MIB::x25ToTcpTable'
Entries can only be created and deleted manually.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
x25ToTcpIndexmandatory The unique number of the MIB row. | Integer32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.272.4.6.9.1.1 | ||||||||||||||
x25ToTcpDescrmandatory This object contains a textual description of the row. | r/w | .1.3.6.1.4.1.272.4.6.9.1.2 | ||||||||||||||
x25ToTcpStatemandatory The State of the MIB row. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.3 | ||||||||||||||
x25ToTcpX25LocAddrmandatory The local X.121 address in the X25 call. If empty, thelocal address will not be matched. Extended Adresses are indicated by a leading '@'. The wildcards '*', '?', '[', ']', '{', '}' may be used. | r/w | .1.3.6.1.4.1.272.4.6.9.1.4 | ||||||||||||||
x25ToTcpX25LocNSAPmandatory The local NSAP in the X25 call. If empty, thelocal NSAP will not be matched. The NSAP is preceeded by an 'X' if it is an OSI compatible NSAP or by a 'N' if the NSAP is in a not OSI compatible format. The wildcards '*',… | r/w | .1.3.6.1.4.1.272.4.6.9.1.5 | ||||||||||||||
x25ToTcpX25RemAddrmandatory The remote X.121 address in the X25 call. If empty, theremote address will not be matched. Extended Adresses are indicated by a leading '@'. The wildcards '*', '?', '[', ']', '{', '}' may be used. | r/w | .1.3.6.1.4.1.272.4.6.9.1.6 | ||||||||||||||
x25ToTcpX25RemNSAPmandatory The remote NSAP in the X25 call. If empty, thelocal NSAP will not be matched. The NSAP is preceeded by an 'X' if it is an OSI compatible NSAP or by a 'N' if the NSAP is in a not OSI compatible format. The wildcards '*'… | r/w | .1.3.6.1.4.1.272.4.6.9.1.7 | ||||||||||||||
x25ToTcpX25ProtocolIdmandatory The protocol id of the X25 call. The protocol idwill not be used for the matching process, when this object is set to -1 | Integer32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.272.4.6.9.1.8 | ||||||||||||||
x25ToTcpX25CallUserDatamandatory For outgoing calls, this field contains the Call User Datafield of the outgoing X.25 Call Request packet. For incoming X.25 calls, the field will be compared against the first or the last part of the Call User Data fie… | OctetStringr/w | .1.3.6.1.4.1.272.4.6.9.1.9 | ||||||||||||||
x25ToTcpX25Cugmandatory If this object has a value other than -1, a Closed User Groupfacility will be generated for outgoing X.25 calls. The value will be the value of the object. | Integer32r/w Constraints: range: -1-9999 | .1.3.6.1.4.1.272.4.6.9.1.10 | ||||||||||||||
x25ToTcpX25CugOutgoingmandatory If this object has a value other than -1, a Closed User GroupOutgoing facility will be generated for outgoing X.25 calls. The value will be the value of the object. | Integer32r/w Constraints: range: -1-9999 | .1.3.6.1.4.1.272.4.6.9.1.11 | ||||||||||||||
x25ToTcpX25CugBilateralmandatory If this object has a value other than -1, a Closed User GroupBilateral facility will be generated for outgoing X.25 calls. The value will be the value of the object. | Integer32r/w Constraints: range: -1-9999 | .1.3.6.1.4.1.272.4.6.9.1.12 | ||||||||||||||
x25ToTcpIpLocAddrmandatory This object describes the the Local address of theIP-datagrams belonging to the set. If both objects are set to 0.0.0.0 the local addresses for the datagrams in the set is not specified and can take any value. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.272.4.6.9.1.15 | ||||||||||||||
x25ToTcpIpLocPortmandatory This object is used for incoming TCP calls. A value other than -1 specifies the local port number that is used for matching. Multiple local ports can be defined to extend the address space for TCP calls. | Integer32r/w Constraints: range: -1-65535 | .1.3.6.1.4.1.272.4.6.9.1.17 | ||||||||||||||
x25ToTcpIpRemAddrmandatory This object describes together with x25ToTcpIpRemMask therange of the Remote addresses of the IP-datagrams belonging to the set. If both objects are set to 0.0.0.0 the local addresses for the datagrams in the set is n… | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.272.4.6.9.1.19 | ||||||||||||||
x25ToTcpIpRemMaskmandatory This object describes together with x25ToTcpIpRemAddr therange of the Remote addresses of the IP-datagrams belonging to the set. If both objects are set to 0.0.0.0 the local addresses for the datagrams in the set is n… | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.272.4.6.9.1.20 | ||||||||||||||
x25ToTcpIpRemPortmandatory This object describes together with x25ToTcpIpRemPortRange therange of local portnumbers of the IP-datagrams belonging to the set. All portnumbers between and including the two objects are within the range. … | Integer32r/w Constraints: range: -1-65535 | .1.3.6.1.4.1.272.4.6.9.1.21 | ||||||||||||||
x25ToTcpIpRemPortRangemandatory This object describes together with x25ToTcpIpRemPort therange of local portnumbers of the IP-datagrams belonging to the set. All portnumbers between and including the two objects are within the range. I… | Integer32r/w Constraints: range: -1-65535 | .1.3.6.1.4.1.272.4.6.9.1.22 | ||||||||||||||
x25ToTcpClassmandatory | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.23 | ||||||||||||||
x25ToTcpMetricmandatory Metric to put order on table entries | Integer32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.272.4.6.9.1.25 | ||||||||||||||
x25ToTcpDirectionmandatory This object describes, if the row its belongs to isvalid in the direction from tcp to x25, x25 to tcp or both direction. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.26 | ||||||||||||||
x25ToTcpPacketizingmandatory This object describes, how x25 packets are encoded onthe IP stream: none: no packetizing. Packetizing information is lost. pos: packetization according to the ATOS specification for POS te… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.27 | ||||||||||||||
x25ToTcpResetmandatory This object describes, how the reception of a resetpacket on the X.25 link shall be handled: clear: the connection will be cleared accept: the reset will be confirmed and the data transfer continues | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.28 | ||||||||||||||
x25ToTcpIntrmandatory Not supported yet!(This object describes, how the reception of an interrupt packet on the X.25 link shall be handled: clear: the connection will be cleared ignore: the intr will be ignored and the data transfer… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.29 | ||||||||||||||
x25ToTcpMonitormandatory If this object is set to on, the row will only be validfor the direction x25 to tcp, when the IpRemoteAddr is reachable by ICMP echo packets. Otherwise it is not used and an alternate entry to a different Ip Address ca… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.30 | ||||||||||||||
x25ToTcpMonStatemandatory This object describes the reachability of the Remote IPAdress: not_monitored: the address is not monitored unreachable: the address is monitored, but does not reply to ICMP Echo Requests ready: the… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.31 | ||||||||||||||
x25ToTcpX25CUDModemandatory This object specifies the matching direction for the calluser data field. When set to right-to-left, the rightmost digits of the call user data field are compared against the x25TcpX25CallUserData. When set to left-to-… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.272.4.6.9.1.32 |