BIANCA-BRICK-X25-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
171

x25LinkTable

table mandatory
.1.3.6.1.4.1.272.4.6.1 · 1 row entry · 28 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25LinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25LinkTable' 
This table contains an entry for each active link. There
may be mutiple active links per interface. For point-to-
multipoint interfaces, the field x25LkAddr specifies
the (MAC-) address of the partner, the link leads to.
There may be also multiple links for a point-to-point
interface in a multilink environment without a multilink-
protocol joining the multiple links to a singe logical
link.
x25LinkEntry row .1.3.6.1.4.1.272.4.6.1.1
The x25LinkEntry is created automatically, when a link
becomes active. The entry is also removed automatically,
if a link becomes disconnected. It may be removed manually
by setting the field x25LinkState to delete, whi…
Indexes
Column Syntax OID
x25LkIfIndexmandatory
The index of the interface the link is running on.
See ifTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.1.1.1
x25LkAddrmandatory
On point-to-multipoint interfaces, this field contains the
(MAC-)address of the partner, the link is leading to.
It is empty for point-to-point interfaces, because there
is only one partner at the other side.
OctetString .1.3.6.1.4.1.272.4.6.1.1.2
x25LkModemandatory
This field indicates wheter the Layer 3 on top of the link
is operated in DTE or DCE mode. The difference is in the
order of VC-assignment, the handling of a call collision
and the range of allowed values of the cause f…
Enumeration
Enumerated Values:
1dte
2dce
 .1.3.6.1.4.1.272.4.6.1.1.3
x25LkModulomandatory
This field indicates whether the layer 3 on top of the link
is in modulo 8 or in modulo 128 mode.
Enumeration
Enumerated Values:
1mod8
2mod128
 .1.3.6.1.4.1.272.4.6.1.1.4
x25LkLICmandatory
Lowest Incoming Channel as seen from the DTE. The value
-1 means no incoming channels.
Integer32
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.1.1.5
x25LkHICmandatory
Highest Incoming Channel as seen from the DTE. The value
-1 means no incoming channels.
Integer32
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.1.1.6
x25LkLTCmandatory
Lowest Twoway Channel as seen from the DTE. The value
-1 means no twoway channels.
Integer32
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.1.1.7
x25LkHTCmandatory
Highest Twoway Channel as seen from the DTE. The value
-1 means no twoway channels.
Integer32
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.1.1.8
x25LkLOCmandatory
Lowest Outgoing Channel as seen from the DTE. The value
-1 means no outgoing channels.
Integer32
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.1.1.9
x25LkHOCmandatory
Highest Outgoing Channel as seen from the DTE. The value
-1 means no outgoing channels.
Integer32
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.1.1.10
x25LkDefPktSizemandatory
The default layer 3 packet size for this link.
Enumeration
Enumerated Values:
7p128
8p256
9p512
10p1024
11p2048
12p4096
 .1.3.6.1.4.1.272.4.6.1.1.11
x25LkDefWinSizemandatory
The default window size. This is always less than 8, if the
layer 3 is operated in modulo 8 mode.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.1.1.12
x25LkMaxPktSizemandatory
The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to
unrestricted, the packet size will only be limited by
the Mtu size of the interface, which is always the
uppe…
Enumeration
Enumerated Values:
1unrestricted
7p128
8p256
9p512
10p1024
11p2048
12p4096
 .1.3.6.1.4.1.272.4.6.1.1.13
x25LkMaxWinSizemandatory
The maximum allowable window size for this link during
window size negotiation.
Integer32
Constraints:
range: 0-127
 .1.3.6.1.4.1.272.4.6.1.1.14
x25LkL2WinSizemandatory
The layer 2 window size for this link.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.1.1.15
x25LkL2RetrTimermandatory
The retransmission timeout in milliseconds for the
layer 2 of this link. If a frame is not acknowledged within
this timeout, it will be retransmitted.
Integer32
Constraints:
range: 100-30000
 .1.3.6.1.4.1.272.4.6.1.1.16
x25LkL2RetrCountermandatory
The retransmission counter for the layer 2 of this link.
If a frame has been retransmitted more often than indicated
by this object, the link will be reset or disconnected,
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.1.1.17
x25LkL2SupervTimermandatory
The link-supervision timeout in milliseconds for the
layer 2 of this link. This timer is started, when the
link gets idle. An RR poll-sequence will be initiated,
when this timeout expires.
Integer32
Constraints:
range: 100-30000
 .1.3.6.1.4.1.272.4.6.1.1.18
x25LkL2IdleTimermandatory
The idle timer in milliseconds for the layer 2 of this
link. If no VCs are established and the the link has been
idle for the time specified by this object, the link
will be disconnected. The value 1 means, that the lin…
Integer32
Constraints:
range: -1-30000
 .1.3.6.1.4.1.272.4.6.1.1.19
x25LkStatemandatory
This object contains the current state of the link. The
link may be manually disconnected by setting this object
to the value delete.
Enumerationr/w
Enumerated Values:
1restart-pending
2restart-collision
3ready
4disc-pending
5reset-pending
6sabm-pending
7xid-pending
8sabm-wait
9l1connect-pending
10l1-ready
 .1.3.6.1.4.1.272.4.6.1.1.20
x25LkNegotiationmandatory
This object determines whether packet-size and windows-size
parameters are negotiated for outgoing calls. When set to
never, outgoing calls are cleared if the call parameters
differ from the default-settings. When set …
Enumeration
Enumerated Values:
1when-necessary
2always
3never
 .1.3.6.1.4.1.272.4.6.1.1.21
x25LkDiscDelayTimermandatory
The disc delay timer in milliseconds for the layer 2 of
this link (only outgoing links). This timer specifies the
time interval between receiving of layer 2 disconnect and
actual disconnect of link. If the partner want …
Integer32
Constraints:
range: 0-30000
 .1.3.6.1.4.1.272.4.6.1.1.22
x25LkCallDelayTimermandatory
The call delay timer in milliseconds for the layer 3 of
this link (only outgoing link). This timer specifies the
time interval between restart procedure completion and
virtual call setup. If restart procedure is comple…
Integer32
Constraints:
range: 0-30000
 .1.3.6.1.4.1.272.4.6.1.1.23
x25LkRestDelayTimermandatory
The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between
establishment of layer 2 and sending of restart packet.
If layer 2 is established and the time specified by this
o…
Integer32
Constraints:
range: 0-30000
 .1.3.6.1.4.1.272.4.6.1.1.24
x25LkRewritingRulemandatory
This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according
to this rewriting rule before the call is being routed.
If this value is set to zero, no rewriting will take
p…
Integer32
Constraints:
range: 0-999999
 .1.3.6.1.4.1.272.4.6.1.1.25
x25LkL1IdleTimermandatory
The idle timer in milliseconds for the layer 1 of this
link. If layer 2 is disconnected and the time specified
by this object expired, the layer 1 will be disconnected.
The value 0 means, the layer 1 should not be dis…
Integer32
Constraints:
range: -1-30000
 .1.3.6.1.4.1.272.4.6.1.1.26
x25LkActSabmDelayTimermandatory
The sabm delay timer in milliseconds for this link (only
dialup outgoing link). This timer specifies the time interval
between establishment of layer 1 and sending of SABM packet.
If layer 1 is established and the tim…
Integer32
Constraints:
range: -1-30000
 .1.3.6.1.4.1.272.4.6.1.1.32
x25LkPsvSabmDelayTimermandatory
The passive sabm delay timer in milliseconds for this
link (only dialup incoming link). This timer specifies the time
interval between establishment of layer 1 and sending of SABM
packet. If layer 1 is established and…
Integer32
Constraints:
range: -1-30000
 .1.3.6.1.4.1.272.4.6.1.1.33

x25LinkPresetTable

table mandatory
.1.3.6.1.4.1.272.4.6.2 · 1 row entry · 23 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25LinkPresetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25LinkPresetTable' 
This table predefines the link-parameters to be used,
when a link is created. If no entry is contained
in this table for a particular link, it will be setup
with the default values. In any case, the parameters
finally choosen for a link are displayed in the x25LinkTable.
For point-to-multipoint interfaces, the parameters
for the link may be set for all connected partners
(x25LkPrAddr is empty) of for the specific partners
individually (x25LkPrAddr is the MAC-address of the 
partner).
x25LinkPresetEntry row .1.3.6.1.4.1.272.4.6.2.1
Entries in this table are created by defining a new value
for the field x25LkPrIfIndex. Entries may be deleted by
setting the field x25LkPrMode to the value delete. Please
note, that changing the entries dont have influ…
Indexes
Column Syntax OID
x25LkPrIfIndexmandatory
The interface index of the link to be predefined. This
object identifies a row in the ifTable.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.2.1.1
x25LkPrAddrmandatory
On point-to-point links, this field must be empty. On
point-to-multipoint links, this field may be empty or
set to a partners (MAC-) address. In the first case, the
definition is valid for all links on the interface
exc…
OctetStringr/w .1.3.6.1.4.1.272.4.6.2.1.2
x25LkPrModemandatory
This field indicates, whether the link is initially operated
in DTE or DCE mode. If a misconfiguration is detected,
(DTE<->DTE od DCE<->DCE) the DTE/DCE assignement is done
be means of the procedure defined in ISOxxxx.
Enumerationr/w
Enumerated Values:
1dte
2dce
3delete
 .1.3.6.1.4.1.272.4.6.2.1.3
x25LkPrModulomandatory
This object indicates, whether the link should be operated
in modulo 8 or modulo 128 mode.
Enumerationr/w
Enumerated Values:
1mod8
2mod128
 .1.3.6.1.4.1.272.4.6.2.1.4
x25LkPrLICmandatory
Lowest Incoming Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no incoming channels.
Integer32r/w
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.2.1.5
x25LkPrHICmandatory
Highest Incoming Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no incoming channels.
Integer32r/w
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.2.1.6
x25LkPrLTCmandatory
Lowest Twoway Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no twoway channels.
Integer32r/w
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.2.1.7
x25LkPrHTCmandatory
Highest Twoway Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no twoway channels.
Integer32r/w
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.2.1.8
x25LkPrLOCmandatory
Lowest Outgoing Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no outgoing channels.
Integer32r/w
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.2.1.9
x25LkPrHOCmandatory
Highest Outgoing Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no outgoing channels.
Integer32r/w
Constraints:
range: -1-4095
 .1.3.6.1.4.1.272.4.6.2.1.10
x25LkPrDefPktSizemandatory
The Layer 3 packet size for this link.
Enumerationr/w
Enumerated Values:
7p128
8p256
9p512
10p1024
11p2048
12p4096
 .1.3.6.1.4.1.272.4.6.2.1.11
x25LkPrDefWinSizemandatory
The default window size. This must be less than 8, if the
layer 3 is operated in modulo 8 mode.
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.2.1.12
x25LkPrMaxPktSizemandatory
The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to
unrestricted, the packet size will only be limited by
the Mtu size of the interface, which is always the
upper…
Enumerationr/w
Enumerated Values:
1unrestricted
7p128
8p256
9p512
10p1024
11p2048
12p4096
 .1.3.6.1.4.1.272.4.6.2.1.13
x25LkPrMaxWinSizemandatory
The maximum allowable window size for this link during
window size negotiation.
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.2.1.14
x25LkPrL2WinSizemandatory
The layer 2 window size for this link.
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.2.1.15
x25LkPrL2RetrTimermandatory
The retransmission timeout in milliseconds for the
layer 2 of this link. If a frame is not acknowledged within
this timeout, it will be retransmitted.
Integer32r/w
Constraints:
range: 100-30000
 .1.3.6.1.4.1.272.4.6.2.1.16
x25LkPrL2RetrCountermandatory
The retransmission counter for the layer 2 of this link.
If a frame has been retransmitted more often than indicated
by this object, the link will be reset or disconnected.
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.2.1.17
x25LkPrL2SupervTimermandatory
The link-supervision timeout in milliseconds for the
layer 2 of this link. This timer is started, when the
link gets idle. An RR poll-sequence will be initiated,
when this timeout expires.
Integer32r/w
Constraints:
range: 100-30000
 .1.3.6.1.4.1.272.4.6.2.1.18
x25LkPrL2IdleTimermandatory
The idle timer in milliseconds for the layer 2 of this
link. If no VCs are established and the the link has been
idle for the time specified by this object, the link
will be disconnected. The value 0 means, the link sho…
Integer32r/w
Constraints:
range: -1-30000
 .1.3.6.1.4.1.272.4.6.2.1.19
x25LkPrNegotiationmandatory
This object determines whether packet-size and windows-size
parameters are negotiated for outgoing calls. When set to
never, outgoing calls are cleared if the call parameters
differ from the default-settings. When set …
Enumerationr/w
Enumerated Values:
1when-necessary
2always
3never
 .1.3.6.1.4.1.272.4.6.2.1.20
x25LkPrRestDelayTimermandatory
The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between
establishment of layer 2 and sending of restart packet.
If layer 2 is established and the time specified by this
o…
Integer32r/w
Constraints:
range: 0-30000
 .1.3.6.1.4.1.272.4.6.2.1.23
x25LkPrVC0mandatory
This object indicates, whether VC#0 shall be allowed on
the link. If this object is set to enable, VC#0 is allowed
and the value -1 shall be used to indicate the absence of
specified channels. This invalidates old confi…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.272.4.6.2.1.24
x25LkPrRewritingRulemandatory
This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according
to this rewriting rule before the call is being routed.
If this value is set to zero, no rewriting will take
p…
Integer32r/w
Constraints:
range: 0-999999
 .1.3.6.1.4.1.272.4.6.2.1.25

x25CallTable

table mandatory
.1.3.6.1.4.1.272.4.6.3 · 1 row entry · 21 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25CallTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25CallTable' 
This table contains an entry for each active X25-call.
Calls always lead from a source-link to a destination-link.
An interface index of 1 denotates a pseudo interfaces
corresponding to all locally terminated calls.
x25CallEntry row .1.3.6.1.4.1.272.4.6.3.1
The entries are created automatically, as soon as a call
gets active. They are removed automatically as soon as
a call gets completely cleared. A call may also be cleared
manually by setting the x25CallState field of an…
Indexes
Column Syntax OID
x25CallSrcIfIndexmandatory
The interface index of the link, the call comes from.
This object contains the value 1, when the call is
originated locally.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.3.1.1
x25CallSrcLinkAddrmandatory
The (MAC-)address of the link, the call comes from (if any)
OctetString .1.3.6.1.4.1.272.4.6.3.1.2
x25CallSrcVCNumbermandatory
The virtual curcuit number of the call on the link, the
call comes from.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.272.4.6.3.1.3
x25CallDstIfIndexmandatory
The interface index of the link, the call leads to. This
object contains the value 1, when the link is terminated
locally.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.3.1.4
x25CallDstLinkAddrmandatory
The (MAC-)address of the link, the call leads to.
OctetString .1.3.6.1.4.1.272.4.6.3.1.5
x25CallDstVCNumbermandatory
The virtual curcuit number of the call on the target link.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.272.4.6.3.1.6
x25CallSrcAddrmandatory
The calling address of the call as received on the source
link.
.1.3.6.1.4.1.272.4.6.3.1.7
x25CallDstAddrmandatory
The called address of the call as received on the source
link.
.1.3.6.1.4.1.272.4.6.3.1.8
x25CallProtocolIdmandatory
The protocol id (the first four byte of the call user data)
of the call as received from the source link.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.3.1.9
x25CallFacilitiesmandatory
The facilities of the call as received from the source
link.
OctetString .1.3.6.1.4.1.272.4.6.3.1.10
x25CallUserDatamandatory
The user data (whithout the protocol id) of the call as
received from the source link.
.1.3.6.1.4.1.272.4.6.3.1.11
x25CallAgemandatory
The age of the call since received from the source link.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.3.1.12
x25CallStatemandatory
The current state of the call. A call may be cleared manually
by setting this object to the value delete.
Enumerationr/w
Enumerated Values:
1routing
2call-pending
3dataxfer
4out-reset-pending
5in-reset-pending
6out-clear-pending
7in-clear-pending
 .1.3.6.1.4.1.272.4.6.3.1.13
x25CallInPktSizemandatory
The packet size of packets being received by the caller,
as negotiated by the negotiation procedure.
Enumeration
Enumerated Values:
1p2
2p4
3p8
4p16
5p32
6p64
7p128
8p256
9p512
10p1024
11p2048
12p4096
13p8192
14p16384
15p32768
 .1.3.6.1.4.1.272.4.6.3.1.14
x25CallOutPktSizemandatory
The packet size of packets being sent by the caller,
as negotiated by the negotiation procedure.
Enumeration
Enumerated Values:
1p2
2p4
3p8
4p16
5p32
6p64
7p128
8p256
9p512
10p1024
11p2048
12p4096
13p8192
14p16384
15p32768
 .1.3.6.1.4.1.272.4.6.3.1.15
x25CallInWinSizemandatory
The window size of packets being received by the caller,
as negotiated by the negotiation procedure.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.3.1.16
x25CallOutWinSizemandatory
The window size of packets being sent by the caller,
as negotiated by the negotiation procedure.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.3.1.17
x25CallPktsSentmandatory
The number of all layer 3 packets (including RR/RNR/REJ)
sent by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.3.1.18
x25CallBytesSentmandatory
The number of data bytes sent in DATA and INTERRUPT
packets by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.3.1.19
x25CallPktsRecvdmandatory
The number of all layer 3 packets (including RR/RNR/REJ)
received by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.3.1.20
x25CallBytesRecvdmandatory
The number of data bytes received in DATA and INTERRUPT
packets by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.3.1.21

x25CallHistoryTable

table mandatory
.1.3.6.1.4.1.272.4.6.4 · 1 row entry · 23 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25CallHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25CallHistoryTable' 
This table provides call information for the last 10 calls
after they have been cleared. Active call are not contained
in the x25CallHistoryTable.
x25CallHistoryEntry row .1.3.6.1.4.1.272.4.6.4.1
Entries are created automatically, when a call is cleared
completely. The first entry is deleted automatcally, if a
new entry would be the 11th entry in the table.
Indexes
Column Syntax OID
x25CallHistoryTimemandatory
Date and time, when the call was received.
.1.3.6.1.4.1.272.4.6.4.1.1
x25CallHistoryDurationmandatory
Duration of the call in seconds.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.4.1.2
x25CallHistorySrcIfIndexmandatory
Interface index of the link, the call came from.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.4.1.3
x25CallHistorySrcLinkAddrmandatory
(MAC-)address of the link, the call came from.
OctetString .1.3.6.1.4.1.272.4.6.4.1.4
x25CallHistorySrcVCNumbermandatory
Virtual Curcuit Number on the link, the call came from.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.272.4.6.4.1.5
x25CallHistoryDstIfIndexmandatory
Interface index of the link, the call leads to.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.4.1.6
x25CallHistoryDstLinkAddrmandatory
(MAC-)address of the link, the call leads to.
OctetString .1.3.6.1.4.1.272.4.6.4.1.7
x25CallHistoryDstVCNumbermandatory
Virtual Curcuit Number on the link, the call leads to.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.272.4.6.4.1.8
x25CallHistorySrcAddrmandatory
The calling party number as received from the source link.
.1.3.6.1.4.1.272.4.6.4.1.9
x25CallHistoryDstAddrmandatory
The called party number as received from the source link.
.1.3.6.1.4.1.272.4.6.4.1.10
x25CallHistoryProtocolIdmandatory
The Protocol ID of the call (first four bytes of the call
user data field) as received from the source link.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.4.1.11
x25CallHistoryFacilitiesmandatory
The facility field of the call as received from the
source link.
OctetString .1.3.6.1.4.1.272.4.6.4.1.12
x25CallHistoryUserDatamandatory
The call user data behind the protocol ID as received
from the source link
.1.3.6.1.4.1.272.4.6.4.1.13
x25CallHistoryInPktSizemandatory
The packet size of packets being received by the caller,
as negotiated by the negotiation procedure.
Enumeration
Enumerated Values:
1p2
2p4
3p8
4p16
5p32
6p64
7p128
8p256
9p512
10p1024
11p2048
12p4096
13p8192
14p16384
15p32768
 .1.3.6.1.4.1.272.4.6.4.1.14
x25CallHistoryOutPktSizemandatory
The packet size of packets being sent by the caller,
as negotiated by the negotiation procedure.
Enumeration
Enumerated Values:
1p2
2p4
3p8
4p16
5p32
6p64
7p128
8p256
9p512
10p1024
11p2048
12p4096
13p8192
14p16384
15p32768
 .1.3.6.1.4.1.272.4.6.4.1.15
x25CallHistoryInWinSizemandatory
The window size of packets being received by the caller,
as negotiated by the negotiation procedure.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.4.1.16
x25CallHistoryOutWinSizemandatory
The window size of packets being sent by the caller,
as negotiated by the negotiation procedure.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.272.4.6.4.1.17
x25CallHistoryPktsSentmandatory
The number of all layer 3 packets (including RR/RNR/REJ)
sent by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.4.1.18
x25CallHistoryBytesSentmandatory
The number of data bytes sent in DATA and INTERRUPT
packets by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.4.1.19
x25CallHistoryPktsRecvdmandatory
The number of all layer 3 packets (including RR/RNR/REJ)
received by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.4.1.20
x25CallHistoryBytesRecvdmandatory
The number of data bytes received in DATA and INTERRUPT
packets by the caller.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.6.4.1.21
x25CallHistoryClearCausemandatory
The clearing cause of the call as received in the first
clear packet. A value of -1 means, no cause was received.
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.272.4.6.4.1.22
x25CallHistoryClearDiagmandatory
The clearing diagnostics of the call as received in the first
clear packet. A value of -1 means, no diagnostics was
received.
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.272.4.6.4.1.23

x25RouteTable

table mandatory
.1.3.6.1.4.1.272.4.6.5 · 1 row entry · 19 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25RouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25RouteTable' 
The X.25 Routing Table specifies the target link for
different call parameters. For each incoming call the
route table will be searched for a matching entry. If
multiple entries match the call parameters, a metric
defines which of them to use. A route is only used, if
the state of the target interface is up or dormant (see
mib2). Also the state of the link is used to determine
wether to use the route or not. With this mechanism,
a rerouting scheme can be implemented.
x25RouteEntry row .1.3.6.1.4.1.272.4.6.5.1
Entries can only be created and deleted manually.
Indexes
Column Syntax OID
x25RtSrcIfIndexmandatory
The originating interface index of the call. If this object
is set to zero, the originating interface index will not
be checked for the matching process. If this field is set to
one, the route is only valid for call or…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.5.1.1
x25RtSrcLinkAddrmandatory
The originating (MAC-)address of the call. If this object
is a zero length string, the originating address will not
be checked for the matching process.
OctetStringr/w .1.3.6.1.4.1.272.4.6.5.1.2
x25RtDstIfIndexmandatory
The interface index the call has to be sent to. If this
value is set to one, the call will be used locally.
If the value is set to zero, the call will be refused. The
routing entry will only be used if the destination i…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.5.1.3
x25RtDstLinkAddrmandatory
The (MAC-)address of the station, the call has to be sent
to. This object is ignored for point-to-point interfaces.
OctetStringr/w .1.3.6.1.4.1.272.4.6.5.1.4
x25RtDstLinkAddrModemandatory
This object specifies the way, the destination link address
is generated. Default will use the default method for the
target interface. When direct is selected, the destination
address is taken from the route entry. Set…
Enumerationr/w
Enumerated Values:
1default
2direct
3delete
4rule
5auto
 .1.3.6.1.4.1.272.4.6.5.1.5
x25RtSrcAddrmandatory
The source X.121 address in the X25 call packet. If empty, the
source address will not be matched. Extended Adresses are
indicated by a leading '@'. The wildcards '*', '?', '[',
']', '{', '}' may be used.
r/w .1.3.6.1.4.1.272.4.6.5.1.6
x25RtSrcNSAPmandatory
The source NSAP in the X25 call packet. If empty, the
source NSAP will not be matched. The NSAP is preceeded
by an 'X' if it is an OSI compatible NSAP or by a 'N' if
the NSAP is in a not OSI compatible format. The wildc…
r/w .1.3.6.1.4.1.272.4.6.5.1.7
x25RtDstAddrmandatory
The target X.121 address in the X25 call packet. If empty, the
target address will not be matched. Extended Adresses are
indicated by a leading '@'. The wildcards '*', '?', '[',
']', '{', '}' may be used.
r/w .1.3.6.1.4.1.272.4.6.5.1.8
x25RtDstNSAPmandatory
The target NSAP in the X25 call packet. If empty, the
target NSAP will not be matched. The NSAP is preceeded
by an 'X' if it is an OSI compatible NSAP or by a 'N' if
the NSAP is in a not OSI compatible format. The wildc…
r/w .1.3.6.1.4.1.272.4.6.5.1.9
x25RtProtocolIdmandatory
The protocol id of the X25 call packet. The protocol id
will not be used for the matching process, when this
object is set to -1
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.5.1.10
x25RtCallUserDatamandatory
The call user data field of the X25 call packet behind the
protocol id. If empty, the call user data field will not
be used for matching.
OctetStringr/w .1.3.6.1.4.1.272.4.6.5.1.11
x25RtRPOAmandatory
This object will be compared to the first value in the
list of RPOAs in the X25 call packet, if not set to -1.
Integer32r/w
Constraints:
range: -1-9999
 .1.3.6.1.4.1.272.4.6.5.1.12
x25RtNUImandatory
This object will be compared to the NUI facility supplied
with the call. If this object is an empty string, the
NUI facility will not be used for the matching process.
r/w .1.3.6.1.4.1.272.4.6.5.1.13
x25RtRewritingRulemandatory
This Object specifies a rewriting rule in the X25 Rewriting
Rule table. The call packed will be processed according
to this rewriting rule before the call is being delivered.
If this value is set to zero, no rewriting w…
Integer32r/w
Constraints:
range: 0-999999
 .1.3.6.1.4.1.272.4.6.5.1.14
x25RtMetricmandatory
This object specifies a metric similar to the metric of an
IP routing entry. If a call matches multiple entries in the
X25 routing table, the routing entry with the lowest value
of Metric will be used to route the call.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.272.4.6.5.1.15
x25RtCugmandatory
This object will be compared to the CUG facility supplied
with the call, if not set to -1.
Integer32r/w
Constraints:
range: -1-9999
 .1.3.6.1.4.1.272.4.6.5.1.16
x25RtCugOutgoingmandatory
This object will be compared to the Outgoing CUG facility
supplied with the call, if not set to -1.
Integer32r/w
Constraints:
range: -1-9999
 .1.3.6.1.4.1.272.4.6.5.1.17
x25RtCugBilateralmandatory
This object will be compared to the Bilateral CUG facility
supplied with the call, if not set to -1.
Integer32r/w
Constraints:
range: -1-9999
 .1.3.6.1.4.1.272.4.6.5.1.18
x25RtDstLinkAddrRulemandatory
If x25RtDstLinkAddrMode is set to rule this object describes,
how to develop the destination link address (may be ISDN
call number, MAC address or IP address) from destination X.25
address or destination X.25 NSAP.
r/w .1.3.6.1.4.1.272.4.6.5.1.19

x25RewriteTable

table mandatory
.1.3.6.1.4.1.272.4.6.6 · 1 row entry · 19 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25RewriteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25RewriteTable' 
This Table contains entries, that describe different
rules of rewriting the call parameters before delivering
a call. Which entry in this table is used, will be determined
by the route table.
x25RewriteEntry row .1.3.6.1.4.1.272.4.6.6.1
Indexes
Column Syntax OID
x25RwRewritingRulemandatory
The unique number of the rewriting rule.
Integer32r/w
Constraints:
range: 1-999999
 .1.3.6.1.4.1.272.4.6.6.1.1
x25RwReverseChargingmandatory
This object describes what to do with the reverse charging
facility.
Enumerationr/w
Enumerated Values:
1dont-change
2set
3clear
4delete
 .1.3.6.1.4.1.272.4.6.6.1.2
x25RwRPOAmandatory
This object describes what to do with the rpoa facility.
Enumerationr/w
Enumerated Values:
1dont-change
2remove-first
 .1.3.6.1.4.1.272.4.6.6.1.3
x25RwNUImandatory
This object contains the new value of the NUI facility.
If this object is an empty string, the NUI facility
will not be changed.
r/w .1.3.6.1.4.1.272.4.6.6.1.4
x25RwSrcAddrmandatory
Specifies how to rewrite the source address. Digits
will be set directly to the new address. A '.' will
move a digit from the old address to the new address.
A '*' will move all remaining digits from the old address
to …
r/w .1.3.6.1.4.1.272.4.6.6.1.5
x25RwSrcNSAPmandatory
Specifies how to rewrite the source NSAP. Digits
will be set directly to the new NSAP. A '.' will
move a digit from the old NSAP to the new NSAP.
A '*' will move all remaining digits from the old NSAP
to the new NSAP. A…
r/w .1.3.6.1.4.1.272.4.6.6.1.6
x25RwDstAddrmandatory
Specifies how to rewrite the destination address. Digits
will be set directly to the new address. A '.' will
move a digit from the old address to the new address.
A '*' will move all remaining digits from the old addres…
r/w .1.3.6.1.4.1.272.4.6.6.1.7
x25RwDstNSAPmandatory
Specifies how to rewrite the destination NSAP. Digits
will be set directly to the new NSAP. A '.' will
move a digit from the old NSAP to the new NSAP.
A '*' will move all remaining digits from the old NSAP
to the new NS…
r/w .1.3.6.1.4.1.272.4.6.6.1.8
x25RwProtocolIdmandatory
This object specifies the new value of the protocol id field.
The protocol id field will not be changed, if this object
is set to -1
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.6.1.9
x25RwCallUserDatamandatory
The new value of the call user data field. The call user data
field will not be changed, if this object is an empty string.
A leading '%' will be ignored. This allows to delete the
call user data portion of a call packe…
OctetStringr/w .1.3.6.1.4.1.272.4.6.6.1.10
x25RwRespSrcAddrmandatory
Specifies how to rewrite the source address of the call
accepted packet. Digits will be set directly to the new
address. A '.' will move a digit from the old address to
the new address. A '*' will move all remaining di…
r/w .1.3.6.1.4.1.272.4.6.6.1.11
x25RwRespSrcNSAPmandatory
Specifies how to rewrite the source NSAP in the call
accepted packet. Digits will be set directly to the new
NSAP. A '.' will move a digit from the old NSAP to the
new NSAP. A '*' will move all remaining digits from th…
r/w .1.3.6.1.4.1.272.4.6.6.1.12
x25RwRespDstAddrmandatory
Specifies how to rewrite the destination address of the call
accepted packet. Digits will be set directly to the new
address. A '.' will move a digit from the old address to
the new address. A '*' will move all remaini…
r/w .1.3.6.1.4.1.272.4.6.6.1.13
x25RwRespDstNSAPmandatory
Specifies how to rewrite the destination NSAP in the call
accepted packet. Digits will be set directly to the new
NSAP. A '.' will move a digit from the old NSAP to the
new NSAP. A '*' will move all remaining digits fr…
r/w .1.3.6.1.4.1.272.4.6.6.1.14
x25RwRespProtocolIdmandatory
This object contains the new value of the ProtocolID field
of the call accepted packet. The ProtocolID will not be
changed, if this object is set to -1.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.6.1.15
x25RwRespCallUserDatamandatory
The new value of the call user data field of the call
accepted packet. The call user data field will not be
changed, if this object is an empty string. A leading
'%' will be ignored. This allows to delete the
call user …
OctetStringr/w .1.3.6.1.4.1.272.4.6.6.1.16
x25RwCugmandatory
This object contains the new value of the CUG facility.
If this object is set to -1, the CUG facility will not be
changed. The CUG facility will be removed, if this object is
set to -2.
Integer32r/w
Constraints:
range: -2-9999
 .1.3.6.1.4.1.272.4.6.6.1.17
x25RwCugOutgoingmandatory
This object contains the new value of the Outgoing CUG
facility. If this object is set to -1, the Outgoing CUG
facility will not be changed. The Outgoing CUG facility will be
removed, if this object is set to -2.
Integer32r/w
Constraints:
range: -2-9999
 .1.3.6.1.4.1.272.4.6.6.1.18
x25RwCugBilateralmandatory
This object contains the new value of the Bilateral CUG
facility. If this object is set to -1, the Bilateral CUG
facility will not be changed. The Bilateral CUG facility will
be removed, if this object is set to -2.
Integer32r/w
Constraints:
range: -2-9999
 .1.3.6.1.4.1.272.4.6.6.1.19

x25MprTable

table mandatory
.1.3.6.1.4.1.272.4.6.7 · 1 row entry · 15 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25MprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25MprTable' 
This table contains an entry for each partner reachable
via X.25 for Multiprotocol over X.25 according to RFC 1356.
Entries in this table are created manually and will result
to the creation of a multiprotocol routing interface in
the ifTable. This interface can than be used by higher
level protocols like ip, ipx and bridging.
          
The object x25MprIfIndex shall be set to 0 for creation
of new entries. The BRICK will allocate the next free
interface index and assign it ti x25MprIfIndex.
          
Rows of this table can be deleted by setting the object
x25MprEncapsulation to the value delete.
x25MprEntry row .1.3.6.1.4.1.272.4.6.7.1
Indexes
Column Syntax OID
x25MprIfIndexmandatory
This object contains an interface index and assigns the
row to an entry in ifTable. When creating new entries
in the table, the value of this object shall be set to 0.
The next free ifIndex value is than allocated
by th…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.7.1.1
x25MprMtumandatory
The Maximum transfer unit to be used with the interface,
the row is describing.
Integer32r/w
Constraints:
range: 576-8180
 .1.3.6.1.4.1.272.4.6.7.1.2
x25MprEncapsulationmandatory
This object specifies the encapsulation method to be used.

If this object is set to ip_rfc877, the RFC877 compatible
encapsulation is selected. The relating interface
is only capabable of transferring IP …
Enumerationr/w
Enumerated Values:
1ip-rfc877
2ip
3ipx
4mpr
5delete
 .1.3.6.1.4.1.272.4.6.7.1.3
x25MprNumVCmandatory
This object specifies the number of VCs used with the
corresponding interface. The BRICK will always try to
have that many VCs available for the relating interface.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.272.4.6.7.1.4
x25MprMaxVCmandatory
This object specifies the maximum number of VCs used
with the corresponding interface. It shall be greater
or equal to x25MprNumVC.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.272.4.6.7.1.5
x25MprWinSizemandatory
This object describes the window size to be
used for outgoing X.25 virtual calls.
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.272.4.6.7.1.6
x25MprPktSizemandatory
This object describes the packet size, to be used for
outgoing X.25 calls. Please note that this parameter is
independant of the x25MprMtu parameter.
Enumerationr/w
Enumerated Values:
7p128
8p256
9p512
10p1024
11p2048
12p4096
 .1.3.6.1.4.1.272.4.6.7.1.7
x25MprShortHoldmandatory
This object specifies the time of inactivity in seconds,
after which the VCs are disconnected automatically.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.272.4.6.7.1.8
x25MprMaxRetriesmandatory
This object specifies the maximum number of tries for
X.25 call establishement. If the BRICK has tried to establish
the call for this many times, the interface is in
the blocked state for a time specified by x25MprBlock…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.272.4.6.7.1.9
x25MprBlockTimemandatory
This object describes the amount of time, the corresponding
interface remains in the blocked state after too many
tries to establish the X.25 call.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.272.4.6.7.1.10
x25MprAddrmandatory
The X.25 address to be used with this interface. A leading
@ indicates extended adressing.
r/w .1.3.6.1.4.1.272.4.6.7.1.11
x25MprModemandatory
This object describes the operating mode of the interface.
normal -- normal operating mode
multiuser -- A new interface is created for each
incoming X.25 call.
Enumerationr/w
Enumerated Values:
1normal
2multiuser
 .1.3.6.1.4.1.272.4.6.7.1.12
x25MprAutoRoutemandatory
This object describes, how automatic routes are created.
It is especially usefull combined with the multiuser Mode
of the interface.
off -- do not create automatic routes
check -- Check the source addr…
Enumerationr/w
Enumerated Values:
1off
2check
3translate
 .1.3.6.1.4.1.272.4.6.7.1.13
x25MprIpSubnetmandatory
This object specifies, together with x25MprSubnetMask
the possible range for automatically created routes.
The object is valid, when x25MprMode is set to autoroute
or multiuser.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.272.4.6.7.1.14
x25MprIpSubnetMaskmandatory
This object specifies, together with x25MprSubnet
the possible range for automatically created routes.
The object is valid, when x25MprMode is set to autoroute
or multiuser.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.272.4.6.7.1.15

x25OverIsdnIfTable

table mandatory
.1.3.6.1.4.1.272.4.6.15 · 1 row entry · 23 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk x25OverIsdnIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-X25-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-X25-MIB::x25OverIsdnIfTable' 
This table contains an entry for each Interface
accessible to the X.25 Switch for X.25 over ISDN
B-channel data transfer. This mechanism superseeds
the old one using the PPP implementation as ISDN
call generator. The relationship to ISDN is much more
direct and offers more possibilities.
          
For each entry in this table, there is a corresponding
Table in the ifTable of mib-2.
x25OverIsdnIfEntry row .1.3.6.1.4.1.272.4.6.15.1
Indexes
Column Syntax OID
xoiIfIndexmandatory
This object contains the interface index for the
interface. When this object is set to an interface
number, that does not yet correspond to an existing
interface, a new interface is created. The interface
index is force…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.1
xoiIfTypemandatory
This object specifies the type of the interface and can
also be used to delete the complete row and the corresponding
interface. The following types are available:

one-to-one Each X.25 Call sent to the in…
Enumerationr/w
Enumerated Values:
1delete
2one-to-one
3multi-vc
 .1.3.6.1.4.1.272.4.6.15.1.2
xoiIfDirectionmandatory
This object specifies the allowd direction of ISDN calls.
The value none can be used to disable an interface.
Enumerationr/w
Enumerated Values:
1in
2out
3both
4none
 .1.3.6.1.4.1.272.4.6.15.1.3
xoiIfLocalNumbermandatory
This object specifies the local ISDN number.

For outgoing calls, it is used as calling party number,
unless it is overwritten by the X.25 routing mechanisms.

For incoming calls it is used t…
r/w .1.3.6.1.4.1.272.4.6.15.1.4
xoiIfRemoteNumbermandatory
This object specifies the remote ISDN number.

For outgoing ISDN calls, it is used as called party number,
unless it is overwritten by X.25 routing mechanisms.

For incoming calls it is used …
r/w .1.3.6.1.4.1.272.4.6.15.1.5
xoiIfStkMaskmandatory
This object specifies the ISDN stacks to be used for incoming
and outgoing ISDN calls. If none of the specified stacks is
ready for use, the ifOperStatus in the corresponding entry
of the ifTable is set to down.
r/w .1.3.6.1.4.1.272.4.6.15.1.6
xoiIfSignallingmandatory
This object sets the signalling for outgoing calls and is used
assign incoming calls to interfaces. If set to 0, an ISDN
signalling is generated automatically for outgoing calls
depending on the values of L1Protocol and…
r/w .1.3.6.1.4.1.272.4.6.15.1.7
xoiIfL1Protocolmandatory
This object specifies the layer 1 protocol for the interface.
The specified mode is used for incoming and outgoing calls.

If auto is selected, the layer 1 protocol will be derived from
ISDN signalling for…
Enumerationr/w
Enumerated Values:
1auto
2hdlc-64k
3hdlc-56k
13v110-1200
14v110-2400
15v110-4800
16v110-7200
17v110-9600
18v110-14400
19v110-19200
20v110-28800
21v110-38400
31v120-64k
32v120-56k
41modem
 .1.3.6.1.4.1.272.4.6.15.1.8
xoiIfL2Protocolmandatory
This object specifies the layer 2 protocol of the interface.
The setting applies to incoming and outgoing calls.

When auto is selected, the layer 2 protocol is derived from
the signalling of the call for …
Enumerationr/w
Enumerated Values:
1auto
2lapb
3pad
4padoverlapb
 .1.3.6.1.4.1.272.4.6.15.1.9
xoiIfPadProfilemandatory
In case of a PAD instance being used (see Layer2Mode), this
object specifies the PAD profile to be used.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.10
xoiIfModemProfilemandatory
In case of a modem being used for layer 1, this object specifies
the modem profile.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.11
xoiIfMaxCallsmandatory
This object specifies the maximum number of calls for the
interface.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.12
xoiIfL2Modemandatory
This object specifies whether the layer2 should act in
DTE or DCE configuration. If set to auto. The ISDN caller
is always DTE, and the callee is DCE.
Enumerationr/w
Enumerated Values:
1auto
2dte
3dce
 .1.3.6.1.4.1.272.4.6.15.1.13
xoiIfStatCommandmandatory
This object may be used, to clear the statistics counters
for the interface. When set to clear, all statistics counters
in this table and the ifTable are set to 0.
Enumerationr/w
Enumerated Values:
1nop
2clear
 .1.3.6.1.4.1.272.4.6.15.1.14
xoiIfMaxRetriesmandatory
This object specifies the number of times, an unsuccessful
call has to be retried. When even after this many times,
it was not possible, to establish an ISDN connection, the
original X.25 call is cleared. In addition to…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.272.4.6.15.1.15
xoiIfRetryTimemandatory
This object specifies the amount of time in seconds, to
wait between the retries of an ISDN call. If the value is
negative, a random time will be chosen between 0 and the
the absolute value.
Integer32r/w
Constraints:
range: -3600-3600
 .1.3.6.1.4.1.272.4.6.15.1.16
xoiIfBlockTimemandatory
This object specifies the amount of time in seconds, the
interface will stay in the BLOCKED state after unsuccessful
ISDN call establishment.
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.272.4.6.15.1.17
xoiIfCurrentCallsmandatory
This object indicates the number of currently established
calls for the interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.20
xoiIfIncomingCallsmandatory
This object is a statistics counter. It counts the number of
incoming calls for the interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.21
xoiIfOutgoingCallsmandatory
This object is a statistics counter. It counts the number of
outgoing calls for the interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.22
xoiIfMaxConcCallsmandatory
This object is a statistics counter. It indicates the maximum
number of calls being active concurrently.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.23
xoiIfCumulTimemandatory
This object is a statistics counter. It cumulates the connection
time of all calls assigned to the interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.6.15.1.24
xoiIfBrkSeqVarmandatory
This object indicates the additional number of startbits to detect
a break sequence send from V.110 terminal over an S2M interface.
The default number of startbits is 22, you can vary this value
in range from 12 to 32,…
Integer32r/w
Constraints:
range: -10-10
 .1.3.6.1.4.1.272.4.6.15.1.25