BIANCA-BRICK-PPPOE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

pppoeCallTable

table mandatory

.1.3.6.1.4.1.272.4.24.1 · 1 row entry · 18 columns

Open in standard view

Uses the bintec variant from /opt/observium/mibs/bintec.

Command help

Walk pppoeCallTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-PPPOE-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-PPPOE-MIB::pppoeCallTable'

The pppoeCallTable displays all currently active PPPoE
calls (incoming and outgoing). Only the system can add
or remove entries to this table.
          
Creating entries: Entries are added when an outgoing
call is made or when an incoming call is connected.
          
Deleting entries: Entries are removed once the 
respective call is disconnected.

pppoeCallEntry row .1.3.6.1.4.1.272.4.24.1.1

Indexes

pppoeCallId

Column Syntax OID

pppoeCallIdmandatory

System internal and unique ID for the related PPPoE call.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.1.1.1

pppoeCallDirectionmandatory

Direction of the PPPoE call, incoming(1) or outgoing(2).

Enumeration

Enumerated Values:

1	incoming
2	outgoing

.1.3.6.1.4.1.272.4.24.1.1.2

pppoeCallAgemandatory

The age of the call. For outgoing calls, the time since
the call began, or for incoming calls, the time since the
call was received. The format is in hh:mm:ss.00.

RFC1155-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.272.4.24.1.1.3

pppoeCallStatemandatory

The state of the PPPoE discovery stage according RFC 2516.

Enumerationr/w

Enumerated Values:

1	idle
2	wait-pado
3	wait-padr
4	wait-pads
5	established
6	terminated
7	close
8	delete

.1.3.6.1.4.1.272.4.24.1.1.4

pppoeCallRemotePhysAddressmandatory

Peer's Ethernet address.

RFC1213-MIBPhysAddress

.1.3.6.1.4.1.272.4.24.1.1.5

pppoeCallLocalPhysAddressmandatory

Local Ethernet Address.

RFC1213-MIBPhysAddress

.1.3.6.1.4.1.272.4.24.1.1.6

pppoeCallAcNamemandatory

The PPPoE access concentrator's name.

.1.3.6.1.4.1.272.4.24.1.1.7

pppoeCallServicemandatory

The PPPoE service name, indicating the service the Host is
requesting.

.1.3.6.1.4.1.272.4.24.1.1.8

pppoeCallReceivedPacketsmandatory

Count of received valid GRE-encapsulated packets.

RFC1155-SMICounter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.272.4.24.1.1.9

pppoeCallReceivedOctetsmandatory

Count of received valid Octets.

RFC1155-SMICounter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.272.4.24.1.1.10

pppoeCallReceivedErrorsmandatory

Count of received invalid GRE-encapsulated packets.

RFC1155-SMICounter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.272.4.24.1.1.11

pppoeCallTransmitPacketsmandatory

Count of transmitted GRE-encapsulated packets.

RFC1155-SMICounter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.272.4.24.1.1.12

pppoeCallTransmitOctetsmandatory

Count of transmitted Octets.

RFC1155-SMICounter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.272.4.24.1.1.13

pppoeCallTransmitErrorsmandatory

Count of transmit errors.

RFC1155-SMICounter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.272.4.24.1.1.14

pppoeCallInfomandatory

Additional information to identify the PPPoE call

.1.3.6.1.4.1.272.4.24.1.1.15

pppoeCallSessionIdmandatory

The PPPoE session ID, assigned via PPPoE Active Discovery
Session-Confirmation (PADS).

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.1.1.16

pppoeCallEthIfIndexmandatory

The interface index (ifIndex) of the associated Ethernet
device.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.1.1.17

pppoeCallAssociatedIfIndexmandatory

The index of the associated virtual interface.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.1.1.18

pppoeCreditsTable

table mandatory

.1.3.6.1.4.1.272.4.24.2 · 1 row entry · 15 columns

Open in standard view

Uses the bintec variant from /opt/observium/mibs/bintec.

Command help

Walk pppoeCreditsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-PPPOE-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-PPPOE-MIB::pppoeCreditsTable'

The pppoeCreditsTable contains informations about current
used resources and maximum allowed 'PPPoE-Service'-dependent
resources.
during a specified interval subsystem.
          
Creating entries: Entries are added by the user.
          
Deleting entries: Entries are removed by setting an
entry's pppoeCreditsSurveillance object to 'delete'.

pppoeCreditsEntry row .1.3.6.1.4.1.272.4.24.2.1

Indexes

pppoeCreditsService

Column Syntax OID

pppoeCreditsServicemandatory

The PPPoE service name, indicating the service the Host is
requesting.

r/w

.1.3.6.1.4.1.272.4.24.2.1.1

pppoeCreditsSurveillancemandatory

Surveillance on or off.

Enumerationr/w

Enumerated Values:

1	off
2	on
3	delete

.1.3.6.1.4.1.272.4.24.2.1.2

pppoeCreditsMeasuretimemandatory

Time of one observation interval in seconds.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.3

pppoeCreditsMaxInConmandatory

Maximum number of allowed incoming connections during the
observation interval. -1 disables this limit.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.4

pppoeCreditsMaxOutConmandatory

Maximum number of allowed outgoing connections during the
observation interval. -1 disables this limit.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.5

pppoeCreditsMaxInDurationmandatory

Maximum connect time for incoming connections in
seconds during the observation interval. -1 disables this
limit.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.6

pppoeCreditsMaxOutDurationmandatory

Maximum connect time for outgoing connections in
seconds during the observation interval. -1 disables this
limit

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.7

pppoeCreditsTimeleftmandatory

Time in seconds left in current interval.
Writing to Timeleft will restart the observation
interval.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.8

pppoeCreditsCurrentInConmandatory

Current number of incoming connections.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.9

pppoeCreditsCurrentOutConmandatory

Current number of outgoing connections.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.10

pppoeCreditsTotalInConmandatory

Total count of incoming connections during
the observation interval.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.11

pppoeCreditsTotalOutConmandatory

Total count of outgoing connections during
the observation interval.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.12

pppoeCreditsTotalInDurationmandatory

Total connect time of incoming connections
during the observation interval.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.13

pppoeCreditsTotalOutDurationmandatory

Total connect time of outgoing connections
during the observation interval.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.2.1.14

pppoeCreditsCurrentAccountmandatory

Total connect time of all outgoing connections during
the observation interval calculated in percent of
'pppoeCreditsMaxOutDuration'.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.272.4.24.2.1.15

pppoePassThroughTable

table mandatory

.1.3.6.1.4.1.272.4.24.5 · 1 row entry · 3 columns

Open in standard view

Uses the bintec variant from /opt/observium/mibs/bintec.

Command help

Walk pppoePassThroughTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-PPPOE-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-PPPOE-MIB::pppoePassThroughTable'

The pppoePassThroughTable is used to enable the PPPoE
mode between the two specified Ethernet interfaces.
          
Creating entries: Entries are added by the user.
          
Deleting entries: Entries are removed once the 
respective variable pppoePassThroughStatus is
set to delete(3).

pppoePassThroughEntry row .1.3.6.1.4.1.272.4.24.5.1

Indexes

pppoePassThroughEthIfIndex1 pppoePassThroughEthIfIndex2

Column Syntax OID

pppoePassThroughEthIfIndex1mandatory

The interface index (ifIndex) of the first associated
Ethernet interface.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.272.4.24.5.1.1

pppoePassThroughEthIfIndex2mandatory

The interface index (ifIndex) of the secondassociated
Ethernet interface.

Integer32r/w