BIANCA-BRICK-HDSL2SHDSL2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
68

hdsl2ShdslInventoryTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk hdsl2ShdslInventoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-HDSL2SHDSL2-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslInventoryTable' 
This table supports retrieval of unit inventory information
available via the EOC from units in a HDSL2/SHDSL line.
          
Entries in this table are dynamically created during the
line discovery process.  The life cycle for these entries
is as follows:
          
- xtu discovers a device, either a far-end xtu or an xru
- an inventory table entry is created for the device
- the line goes down for whatever reason
- inventory table entries for unreachable devices are
  destroyed.
          
As these entries are created/destroyed dynamically, they
are NOT persistent.
hdsl2ShdslInventoryEntry row .1.3.6.1.4.1.272.4.35.1.1.3.1
An entry in the hdsl2ShdslInventoryTable. Each entry
represents inventory information for a single unit in a
HDSL2/SHDSL line. It is indexed by the ifIndex of the
HDSL2/SHDSL line.
Indexes
Column Syntax OID
hdsl2ShdslInvIfIndexmandatory
This object specifies the associated interface index of
this HDSL2/SHDSL line.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.3.1.1
hdsl2ShdslInvIndexmandatory
Each entry in this table corresponds to a physical element
in a HDSL2/SHDSL Span. It is based on the EOC unit addressing
scheme with reference to the xtuC.
Enumeration
Enumerated Values:
1xtuC
2xtuR
3xru1
4xru2
5xru3
6xru4
7xru5
8xru6
9xru7
10xru8
 .1.3.6.1.4.1.272.4.35.1.1.3.1.2
hdsl2ShdslInvVendorIDmandatory
Vendor ID as reported in an Inventory Response message.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.272.4.35.1.1.3.1.3
hdsl2ShdslInvVendorModelNumbermandatory
Vendor model number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.272.4.35.1.1.3.1.4
hdsl2ShdslInvVendorSerialNumbermandatory
Vendor serial number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.272.4.35.1.1.3.1.5
hdsl2ShdslInvVendorEOCSoftwareVersionmandatory
Vendor EOC version as reported in a Discovery Response
message.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.3.1.6
hdsl2ShdslInvStandardVersionmandatory
Version of the HDSL2/SHDSL standard implemented, as reported
in an Inventory Response message.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.3.1.7
hdsl2ShdslInvVendorListNumbermandatory
Vendor list number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.272.4.35.1.1.3.1.8
hdsl2ShdslInvVendorIssueNumbermandatory
Vendor issue number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.272.4.35.1.1.3.1.9
hdsl2ShdslInvVendorSoftwareVersionmandatory
Vendor software version as reported in an Inventory Response
message.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.272.4.35.1.1.3.1.10
hdsl2ShdslInvEquipmentCodemandatory
Equipment code conforming to ANSI T1.213, Coded Identification
of Equipment Entities.
OctetString
Constraints:
range: 10-10
 .1.3.6.1.4.1.272.4.35.1.1.3.1.11
hdsl2ShdslInvVendorOthermandatory
Other vendor information as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.272.4.35.1.1.3.1.12
hdsl2ShdslInvTransmissionModeCapabilitymandatory
Contains the transmission mode capability of the SHDSL unit:
region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B
Enumeration
Enumerated Values:
1region1
2region2
 .1.3.6.1.4.1.272.4.35.1.1.3.1.13

hdsl2ShdslEndpointConfTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.4 · 1 row entry · 15 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk hdsl2ShdslEndpointConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-HDSL2SHDSL2-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfTable' 
This table supports configuration parameters for segment
endpoints in a HDSL2/SHDSL line.  As this table is indexed
by ifIndex, it MUST be maintained in a persistent manner.
Entries in this table are created by the system only.
hdsl2ShdslEndpointConfEntry row .1.3.6.1.4.1.272.4.35.1.1.4.1
An entry in the hdsl2ShdslEndpointConfTable. Each entry
represents a single segment endpoint in a HDSL2/SHDSL line.
It is indexed by the ifIndex of the HDSL2/SHDSL line.
Indexes
Column Syntax OID
hdsl2ShdslEndpointConfIfIndexmandatory
This object specifies the associated interface index of
this HDSL2/SHDSL line.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.4.1.1
hdsl2ShdslEndpointConfSidemandatory
The side of the unit associated with this segment endpoint -
Network/Customer side - as per the Hdsl2ShdslUnitSide textual
convention.
Enumerationr/w
Enumerated Values:
1networkSide
2customerSide
 .1.3.6.1.4.1.272.4.35.1.1.4.1.2
hdsl2ShdslEndpointConfWireInterfacemandatory
This object configures the bonding mode of
the SHDSL Line.
twoWire(1) : no bonding is used
fourWire(2) : four-wire mode
fourWireStandard(3) : four-wire mode, disable globespan enhanced mode
fourWireIMA…
Enumerationr/w
Enumerated Values:
1twoWire
2fourWire
3fourWireStandard
4fourWireIMA
5sixWire
6sixWireIMA
7eightWire
8eightWireIMA
9not-used
10groupMember
11twoWireEFM
12fourWireEFM
13sixWireEFM
14eightWireEFM
 .1.3.6.1.4.1.272.4.35.1.1.4.1.5
hdsl2ShdslEndpointConfMinLineRatemandatory
This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.4.1.6
hdsl2ShdslEndpointConfMaxLineRatemandatory
This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.4.1.7
hdsl2ShdslEndpointConfTransmissionModemandatory
This object specifies the regional setting for the SHDSL
line:
region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B
Enumerationr/w
Enumerated Values:
1region1
2region2
3region1or2
 .1.3.6.1.4.1.272.4.35.1.1.4.1.8
hdsl2ShdslEndpointConfWorstCaseTargetMarginDownmandatory
This object specifies the downstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR
margin is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.272.4.35.1.1.4.1.11
hdsl2ShdslEndpointConfWorstCaseTargetMarginUpmandatory
This object specifies the upstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: -10-21
 .1.3.6.1.4.1.272.4.35.1.1.4.1.13
hdsl2ShdslEndpointConfGroupIdmandatory
This object defines which wire-pairs belong to the same
M-pair group or IMA group. Members of the same group have
the same entry.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.272.4.35.1.1.4.1.14
hdsl2ShdslEndpointConfLineProbeEnablemandatory
This object specifies the configuration of the PMMS
behavior:
auto - Line Probe is enabled if hdsl2ShdslEndpointConfMinLineRate
< hdsl2ShdslEndpointConfMaxLineRate.
disable - Line Probe is disabled.
enable - Line …
Enumerationr/w
Enumerated Values:
1auto
2disable
3enable
4enable-std
 .1.3.6.1.4.1.272.4.35.1.1.4.1.15
hdsl2ShdslEndpointConfLicenseUsagemandatory
Shows which license type is currently used for this
SHDSL interface.
Enumeration
Enumerated Values:
1none
2missing
3shdsl
 .1.3.6.1.4.1.272.4.35.1.1.4.1.16
hdsl2ShdslEndpointConfPamModemandatory
This object specifies which modulation modes are allowed
for this wire pair.
16 - 16-TCPAM, used for Annex A,B and F,G.
32 - 32-TCPAM, used for Annex F,G only.
4, 8, 64, 128 - non standard proprietary mod…
Integer32r/w
Constraints:
range: 4-252
 .1.3.6.1.4.1.272.4.35.1.1.4.1.17
hdsl2ShdslEndpointConfTotalMinLineRatemandatory
This object configures the minimum transmission rate
in bits-per-second (bps) for the associated SHDSL bundle.
The associated interfaces go up only when the sum of the
data rates of the associated wire pairs in state S…
Integer32r/w
Constraints:
range: 1-50000000
 .1.3.6.1.4.1.272.4.35.1.1.4.1.18
hdsl2ShdslEndpointConfMinWirePairsmandatory
This object configures the minimum number of wire pairs
for the associated SHDSL bundle. The associated interfaces
go up only when at least the specified number of wire pairs
is connected and in Showtime.
This variable …
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.272.4.35.1.1.4.1.19
hdsl2ShdslEndpointConfCapListStylemandatory
This object specifies the data format of the capability list,
that is exchanged during the G.994.1 handshake:
auto - automatic detection of the used capability list style.
old - only ATM modes till 2312 kbps can be nego…
Enumerationr/w
Enumerated Values:
1auto
2old
3new
 .1.3.6.1.4.1.272.4.35.1.1.4.1.20

hdsl2ShdslEndpointCurrTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.5 · 1 row entry · 33 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk hdsl2ShdslEndpointCurrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-HDSL2SHDSL2-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointCurrTable' 
This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL Lines.  As with other
tables in this MIB indexed by ifIndex, entries in this table
MUST be maintained in a persistent manner. Entries in this
table are created by the system only.
hdsl2ShdslEndpointCurrEntry row .1.3.6.1.4.1.272.4.35.1.1.5.1
An entry in the hdsl2ShdslEndpointCurrTable. Each entry
contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line.
Indexes
Column Syntax OID
hdsl2ShdslEndpointCurrIfIndexmandatory
This object specifies the associated interface index of
this HDSL2/SHDSL line.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.1
hdsl2ShdslEndpointCurrReceivedBlksmandatory
Count of all encoded blocks received on this channel
since agent reset.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.2
hdsl2ShdslEndpointCurrTransmittedBlksmandatory
Count of all encoded blocks transmitted on this channel
since agent reset.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.3
hdsl2ShdslEndpointCurrCorrectedBlksmandatory
Count of all blocks received with errors that were
corrected since agent reset. These blocks are passed
on as good data.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.4
hdsl2ShdslEndpointCurrUncorrectBlksmandatory
Count of all blocks received with uncorrectable errors
since agent reset.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.5
hdsl2ShdslEndpointCurrAtnmandatory
The current loop attenuation for this endpoint as reported in
a Network or Customer Side Performance Status message.
Integer32
Constraints:
range: -127-128
 .1.3.6.1.4.1.272.4.35.1.1.5.1.6
hdsl2ShdslEndpointCurrSnrMgnmandatory
The current SNR margin for this endpoint as reported in a
Status Response/SNR message.
Integer32
Constraints:
range: -127-128
 .1.3.6.1.4.1.272.4.35.1.1.5.1.7
hdsl2ShdslEndpointCurrStatusmandatory
Contains the current state of the endpoint. This is a
bitmap of possible conditions. The various bit positions
are:

noDefect There no defects on the line.

powerBackoff …
Enumeration
Enumerated Values:
1noDefect
2powerBackoff
3deviceFault
4dcContinuityFault
5snrMarginAlarm
7loswFailureAlarm
8configInitFailure
9protocolInitFailure
10noNeighborPresent
11loopbackActive
 .1.3.6.1.4.1.272.4.35.1.1.5.1.8
hdsl2ShdslEndpointESmandatory
Count of Errored Seconds (ES) on this endpoint since the xU
was last restarted.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.9
hdsl2ShdslEndpointSESmandatory
Count of Severely Errored Seconds (SES) on this endpoint
since the xU was last restarted.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.10
hdsl2ShdslEndpointCRCanomaliesmandatory
Count of CRC anomalies on this endpoint since the xU was
last restarted.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.11
hdsl2ShdslEndpointLOSWSmandatory
Count of Loss of Sync Word (LOSW) Seconds on this endpoint
since the xU was last restarted.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.12
hdsl2ShdslEndpointUASmandatory
Count of Unavailable Seconds (UAS) on this endpoint since
the xU was last restarted.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.13
hdsl2ShdslEndpointCurr15MinReceivedBlksmandatory
Count of all encoded blocks received on this channel
within the mandatory 15 minute interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.14
hdsl2ShdslEndpointCurr15MinTransmittedBlksmandatory
Count of all encoded blocks transmitted on this channel
within the mandatory 15 minute interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.15
hdsl2ShdslEndpointCurr15MinCorrectedBlksmandatory
Count of all blocks received with errors that were
corrected on this channel within the mandatory 15 minute
interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.16
hdsl2ShdslEndpointCurr15MinUncorrectBlksmandatory
Count of all blocks received with uncorrectable errors
on this channel within the mandatory 15 minute interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.17
hdsl2ShdslEndpointCurr15MinTimeElapsedmandatory
Total elapsed seconds in the current 15-minute interval.
Integer32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.272.4.35.1.1.5.1.18
hdsl2ShdslEndpointCurr15MinESmandatory
Count of Errored Seconds (ES) in the current 15-minute
interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.19
hdsl2ShdslEndpointCurr15MinSESmandatory
Count of Severely Errored Seconds (SES) in the current
15-minute interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.20
hdsl2ShdslEndpointCurr15MinCRCanomaliesmandatory
Count of CRC anomalies in the current 15-minute interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.21
hdsl2ShdslEndpointCurr15MinLOSWSmandatory
Count of Loss of Sync Word (LOSW) Seconds in the current
15-minute interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.22
hdsl2ShdslEndpointCurr15MinUASmandatory
Count of Unavailable Seconds (UAS) in the current 15-minute
interval.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.23
hdsl2ShdslEndpointCurr1DayReceivedBlksmandatory
Count of all encoded blocks received on this channel
during the mandatory day as measured by
hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.24
hdsl2ShdslEndpointCurr1DayTransmittedBlksmandatory
Count of all encoded blocks transmitted on this channel
during the mandatory day as measured by
hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.25
hdsl2ShdslEndpointCurr1DayCorrectedBlksmandatory
Count of all blocks received with errors that were
corrected on this channel during the mandatory day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.26
hdsl2ShdslEndpointCurr1DayUncorrectBlksmandatory
Count of all blocks received with uncorrectable errors
on this channel during the mandatory day as measured by
hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.27
hdsl2ShdslEndpointCurr1DayTimeElapsedmandatory
Number of seconds that have elapsed since the beginning of
the current 1-day interval.
Integer32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.272.4.35.1.1.5.1.28
hdsl2ShdslEndpointCurr1DayESmandatory
Count of Errored Seconds (ES) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.29
hdsl2ShdslEndpointCurr1DaySESmandatory
Count of Severely Errored Seconds (SES) during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.30
hdsl2ShdslEndpointCurr1DayCRCanomaliesmandatory
Count of CRC anomalies during the current day as measured
by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.31
hdsl2ShdslEndpointCurr1DayLOSWSmandatory
Count of Loss of Sync Word (LOSW) Seconds during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.32
hdsl2ShdslEndpointCurr1DayUASmandatory
Count of Unavailable Seconds (UAS) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.33

hdsl2ShdslSpanConfProfileTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.10 · 1 row entry · 7 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk hdsl2ShdslSpanConfProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-HDSL2SHDSL2-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslSpanConfProfileTable' 
This table supports definitions of span configuration
profiles for SHDSL lines.  HDSL2 does not support these
configuration options.  This table MUST be maintained
in a persistent manner. Entries in this table are created by
the system only.
hdsl2ShdslSpanConfProfileEntry row .1.3.6.1.4.1.272.4.35.1.1.10.1
Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profil…
Indexes
Column Syntax OID
hdsl2ShdslSpanConfProfileNamemandatory
This object is the unique index associated with this profile.
Entries in this table are referenced via the object
hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.272.4.35.1.1.10.1.1
hdsl2ShdslSpanConfWireInterfacemandatory
This object configures the bonding mode of
the SHDSL Line.
twoWire(1) : no bonding is used
fourWire(2) : four-wire mode
fourWireStandard(3) : four-wire mode, disable globespan enhanced mode
fourWireIMA…
Enumerationr/w
Enumerated Values:
1twoWire
2fourWire
3fourWireStandard
4fourWireIMA
5sixWire
6sixWireIMA
7eightWire
8eightWireIMA
9not-used
10groupMember
11twoWireEFM
12fourWireEFM
13sixWireEFM
14eightWireEFM
 .1.3.6.1.4.1.272.4.35.1.1.10.1.2
hdsl2ShdslSpanConfMinLineRatemandatory
This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.10.1.3
hdsl2ShdslSpanConfMaxLineRatemandatory
This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.10.1.4
hdsl2ShdslSpanConfTransmissionModemandatory
This object specifies the regional setting for the SHDSL
line:
region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B
Enumerationr/w
Enumerated Values:
1region1
2region2
3region1or2
 .1.3.6.1.4.1.272.4.35.1.1.10.1.6
hdsl2ShdslSpanConfWorstCaseTargetMarginDownmandatory
This object specifies the downstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR
margin is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.272.4.35.1.1.10.1.10
hdsl2ShdslSpanConfWorstCaseTargetMarginUpmandatory
This object specifies the upstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: -10-21
 .1.3.6.1.4.1.272.4.35.1.1.10.1.12