BAY-STACK-VRRP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

bsveVrrpOperExtTable

table
.1.3.6.1.4.1.45.5.11.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk bsveVrrpOperExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BAY-STACK-VRRP-EXT-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BAY-STACK-VRRP-EXT-MIB::bsveVrrpOperExtTable' 
Extensions to the vrrpOperTable from RFC 2787.
bsveVrrpOperExtEntry row .1.3.6.1.4.1.45.5.11.1.2.1
A set of objects that augments the vrrpOperTable.
Indexes
Column Syntax OID
bsveVrrpOperExtCriticalIpAddr
IP address of the interface that will cause a
shutdown event.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.45.5.11.1.2.1.1
bsveVrrpOperExtCriticalIpAddrEnabled
Indicates whether the user-defined critical IP address is
enabled. If the user-defined critical IP address is not
enabled, a default critical IP address of 0.0.0.0 will be used.
No effect if an user-defined IP address …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.45.5.11.1.2.1.2
bsveVrrpOperExtHoldDownTimer
Used to configure the amount of time (in seconds)
to wait before preempting the current vrrp master.
Integer32r/w
Constraints:
range: 0-21600
 .1.3.6.1.4.1.45.5.11.1.2.1.3
bsveVrrpOperExtHoldDownState
Used to indicate the hold-down state of this vrrp
interface. If the hold-down timer is operational
this variable will be set to 'active'. 'dormant'
otherwise.
Enumeration
Enumerated Values:
1dormant
2active
 .1.3.6.1.4.1.45.5.11.1.2.1.4
bsveVrrpOperExtHoldDownTimeRemaining
Used to indicate the amount of time (in seconds)
left before the bsveVrrpOperExtHoldDownTimer will expire.
Integer32
Constraints:
range: 0-21600
 .1.3.6.1.4.1.45.5.11.1.2.1.5
bsveVrrpOperExtAction
Used to trigger an action on this vrrp interface.
Enumerationr/w
Enumerated Values:
1none
2preemptHoldDownTimer
 .1.3.6.1.4.1.45.5.11.1.2.1.6
bsveVrrpOperExtBackUpMasterEnabled
 SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.45.5.11.1.2.1.7
bsveVrrpOperExtBackUpMasterState
 Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.45.5.11.1.2.1.8
bsveVrrpOperExtFasterAdvInterval
This is the faster advertisement interval, in
milliseconds, between sending advertisement
messages. When the faster advertisement interval
enable is checked, the faster advertisement interval
is being used instead of th…
Integer32r/w
Constraints:
range: 200-1000
 .1.3.6.1.4.1.45.5.11.1.2.1.9
bsveVrrpOperExtFasterAdvIntervalEnabled
Used to indicate if the Faster Advertisement Interval
should be used. 'Disable' means use regular
Advertisement interval.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.45.5.11.1.2.1.10