BAY-STACK-PORT-MIRRORING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

bsPortMirroringCtrlTable

table
.1.3.6.1.4.1.45.5.28.1.1 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk bsPortMirroringCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BAY-STACK-PORT-MIRRORING-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BAY-STACK-PORT-MIRRORING-MIB::bsPortMirroringCtrlTable' 
A table containing port mirroring control information about every
instance.
bsPortMirroringCtrlEntry row .1.3.6.1.4.1.45.5.28.1.1.1
A list of port miroring control information for an instance.
Indexes
Column Syntax OID
bsPortMirroringCtrlInstance
The port mirroring instance number
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.45.5.28.1.1.1.1
bsPortMirroringCtrlPortMode
These are the supported port mirroring modes:
disable(1) - Disable port mirroring
Adst(2) - Mirror packets with destination MAC address A
Asrc(3) - Mirror packets with source MAC address A
AsrcBdst(4) - Mirror …
Enumerationr/w
Enumerated Values:
1disable
2adst
3asrc
4asrcBdst
5asrcBdstOrBsrcAdst
6asrcOrAdst
7manytoOneRx
8manytoOneRxTx
9manytoOneTx
10xrx
11xrxOrXtx
12xrxOrYtx
13xrxYtx
14xrxYtxOrYrxXtx
15xtx
 .1.3.6.1.4.1.45.5.28.1.1.1.2
bsPortMirroringCtrlMonitorPort
The monitor port
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.45.5.28.1.1.1.3
bsPortMirroringCtrlPortListX
The port list X
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.45.5.28.1.1.1.4
bsPortMirroringCtrlPortListY
The port list Y
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.45.5.28.1.1.1.5
bsPortMirroringCtrlMacAddressA
The MAC address A
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.45.5.28.1.1.1.6
bsPortMirroringCtrlMacAddressB
The MAC address B
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.45.5.28.1.1.1.7
bsPortMirroringCtrlRowStatus
Used to create/delete entries in the bsPortMirroringCtrlTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.45.5.28.1.1.1.8
bsPortMirroringCtrlAllowTraffic
Allow port to participate in normal frame switching.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.45.5.28.1.1.1.9
bsPortMirroringCtrlRspanVlan
The VLAN of the RSPAN source session which is associated
to a standard port mirroring session on the source device.
A value of 0 means RSPAN vlan is not specified.
Integer32r/w
Constraints:
range: 0-0
range: 2-4094
 .1.3.6.1.4.1.45.5.28.1.1.1.10
bsPortMirroringCtrlMirrorVlan
The VLAN of a port mirroring source session on the source
device based on which the traffic is selected.
A value of 0 means MIRROR vlan is not specified.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.45.5.28.1.1.1.11

bsPortMirroringRspanTable

table
.1.3.6.1.4.1.45.5.28.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk bsPortMirroringRspanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BAY-STACK-PORT-MIRRORING-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BAY-STACK-PORT-MIRRORING-MIB::bsPortMirroringRspanTable' 
A table containing port mirroring RSPAN settings of every
instance.
bsPortMirroringRspanEntry row .1.3.6.1.4.1.45.5.28.1.2.1
A list of port miroring RSPAN settings for an instance.
Indexes
Column Syntax OID
bsPortMirroringRspanInstance
The RSPAN instance number
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.45.5.28.1.2.1.1
bsPortMirroringRspanMtp
The RSPAN destination port
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.45.5.28.1.2.1.2
bsPortMirroringRspanVlan
The VLAN of a RSPAN destination session configured
on the destination device
Integer32r/w
Constraints:
range: 2-4094
 .1.3.6.1.4.1.45.5.28.1.2.1.3
bsPortMirroringRspanRowStatus
Used to create/delete entries in the bsPortMirroringRspanTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.45.5.28.1.2.1.4