BATTERY-MIB Table View

This table provides information on batteries.  It contains
one conceptual row per battery in a managed entity.
          
Batteries are indexed by the entPhysicalIndex of the
entPhysicalTable defined in the ENTITY-MIB (RFC 6933).
          
For implementations of the BATTERY-MIB, an implementation of
the ENTITY-MIB complying with the entity4CRCompliance
MODULE-COMPLIANCE statement of the ENTITY-MIB is required.
          
If batteries are replaced, and the replacing battery uses
the same physical connector as the replaced battery, then
the replacing battery SHOULD be indexed with the same value
of object entPhysicalIndex as the replaced battery.

batteryEntry row .1.3.6.1.2.1.233.1.1.1

An entry providing information on a battery.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
batteryIdentifier This object contains an identifier for the battery. Many manufacturers deliver not only simple batteries but battery packages including additional hardware and firmware. Typically, these modules include a…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.233.1.1.1.1
batteryFirmwareVersion This object indicates the version number of the firmware that is included in a battery module. Many manufacturers deliver not pure batteries but battery packages including additional hardware and firmware…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.233.1.1.1.2
batteryType This object indicates the type of battery. It distinguishes between primary (not rechargeable) batteries, rechargeable (secondary) batteries, and capacitors. Capacitors are not really batteries but are o…	Enumeration Enumerated Values: 1 unknown 2 other 3 primary 4 rechargeable 5 capacitor	.1.3.6.1.2.1.233.1.1.1.3
batteryTechnology This object indicates the technology used by the battery. Numbers identifying battery technologies are registered at IANA. A current list of assignments can be found at <http://www.iana.org/assignments/battery-technolo…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.4
batteryDesignVoltage This object provides the design (or nominal) voltage of the battery in units of millivolt (mV). Note that the design voltage is a constant value and typically different from the actual voltage of the batt…	millivoltSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.5
batteryNumberOfCells This object indicates the number of cells contained in the battery. A value of 0 indicates that the number of cells is unknown.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.6
batteryDesignCapacity This object provides the design (or nominal) capacity of the battery in units of milliampere hours (mAh). Note that the design capacity is a constant value and typically different from the actual capacity…	milliampere hoursSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.7
batteryMaxChargingCurrent This object provides the maximum current to be used for charging the battery in units of milliampere (mA). Note that the maximum charging current may not lead to optimal charge of the battery and that som…	milliampereSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.8
batteryTrickleChargingCurrent This object provides the recommended average current to be used for trickle charging the battery in units of mA. Typically, this is a value recommended by the manufacturer of the battery or by the manufac…	milliampereSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.9
batteryActualCapacity This object provides the actual capacity of the battery in units of mAh. Typically, the actual capacity of a battery decreases with time and with usage of the battery. It is usually lower than the design…	milliampere hoursSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.10
batteryChargingCycleCount This object indicates the number of completed charging cycles that the battery underwent. In line with the Smart Battery Data Specification Revision 1.1, a charging cycle is defined as the process of discharging the ba…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.11
batteryLastChargingCycleTime The date and time of the last charging cycle. The value '0000000000000000'H is returned if the battery has not been charged yet or if the last charging time cannot be determined. For batteries of type pr…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.233.1.1.1.12
batteryChargingOperState This object indicates the current charging state of the battery. Value unknown(1) indicates that the charging state of the battery cannot be determined. Value charging(2) indicates that the…	Enumeration Enumerated Values: 1 unknown 2 charging 3 maintainingCharge 4 noCharging 5 discharging	.1.3.6.1.2.1.233.1.1.1.13
batteryChargingAdminState The value of this object indicates the desired charging state of the battery. The real state is indicated by object batteryChargingOperState. See the definition of object batteryChargingOperState for a description of …	Enumerationr/w Enumerated Values: 1 notSet 2 charge 3 doNotCharge 4 discharge	.1.3.6.1.2.1.233.1.1.1.14
batteryActualCharge This object provides the actual charge of the battery in units of mAh. Note that the actual charge needs to be measured and is typically an estimate based on observed discharging and charging cycles of th…	milliampere hoursSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.15
batteryActualVoltage This object provides the actual voltage of the battery in units of mV. A value of 'ffffffff'H indicates that the actual voltage cannot be determined.	millivoltSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.16
batteryActualCurrent This object provides the actual charging or discharging current of the battery in units of mA. The charging current is represented by positive values, and the discharging current is represented by negative values. …	milliampereSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.233.1.1.1.17
batteryTemperature The ambient temperature at or within close proximity of the battery. A value of '7fffffff'H indicates that the temperature cannot be determined.	deci-degrees CelsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.233.1.1.1.18
batteryAlarmLowCharge This object provides the lower-threshold value for object batteryActualCharge. If the value of object batteryActualCharge falls below this threshold, a low-battery alarm will be raised. The alarm procedure may include…	milliampere hoursSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.19
batteryAlarmLowVoltage This object provides the lower-threshold value for object batteryActualVoltage. If the value of object batteryActualVoltage falls below this threshold, a low-battery alarm will be raised. The alarm procedure may inclu…	millivoltSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.20
batteryAlarmLowCapacity This object provides the lower-threshold value for object batteryActualCapacity. If the value of object batteryActualCapacity falls below this threshold, a battery aging alarm will be raised. The alarm procedure may i…	milliampere hoursSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.21
batteryAlarmHighCycleCount This object provides the upper-threshold value for object batteryChargingCycleCount. If the value of object batteryChargingCycleCount rises above this threshold, a battery aging alarm will be raised. The alarm procedu…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.233.1.1.1.22
batteryAlarmHighTemperature This object provides the upper-threshold value for object batteryTemperature. If the value of object batteryTemperature rises above this threshold, a battery high temperature alarm will be raised. The alarm procedure …	deci-degrees CelsiusSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.233.1.1.1.23
batteryAlarmLowTemperature This object provides the lower-threshold value for object batteryTemperature. If the value of object batteryTemperature falls below this threshold, a battery low temperature alarm will be raised. The alarm procedure m…	deci-degrees CelsiusSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.233.1.1.1.24
batteryCellIdentifier The value of this object identifies one or more cells of a battery. The format of the cell identifier may vary between different implementations. It should uniquely identify one or more cells of the indexed battery. …	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.233.1.1.1.25