AtiStackSwitch9424-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
35
Rows
35
Columns
242

atiStkSwSysProductInfoTable

table
.1.3.6.1.4.1.207.8.17.1.3 · 1 row entry · 25 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwSysProductInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwSysProductInfoTable' 
This table contains a list of modules present in the switch
stack and their associated hardware information.
atiStkSwSysProductInfoEntry row .1.3.6.1.4.1.207.8.17.1.3.1
This object specifies an entry in 'atiStkSwSysProductInfoTable'
that describes the hardware informaton for a module present in
the switch stack.
Indexes
Column Syntax OID
atiStkSwSysModuleId
The ID of this module.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.3.1.1
atiStkSwSysProductType
The product type of this module.
AtiProductType
Type Values:
1other
2at8324
3at8316F-MT
4at8316F-VF
5at8316F-SC
6at8524M
7at8550GB
8at8516F
9at8550SP
10at9424T-SP
11at9424T-GB
12at9408LC-SP
13at8524-POE
14at9424Ti-SP
15at9448Ts-XP
16at9448Ts
17at9448T-SP
18at9424Ts-XP
19at9424Ts
21at9424T
22at9424T-POE
23at9424TL
 .1.3.6.1.4.1.207.8.17.1.3.1.2
atiStkSwSysMacAddress
The system MAC address used by this module.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.207.8.17.1.3.1.3
atiStkSwSysSwName
The name of the system software running on this module.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.3.1.4
atiStkSwSysSwVersion
The version of the system software running on this module.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.3.1.5
atiStkSwSysHwName
The name of the module hardware.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.3.1.6
atiStkSwSysHwRevision
The revision number of the module hardware.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.3.1.7
atiStkSwSysSerialNumber
The serial number of the module.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.3.1.8
atiStkSwSysTotalPortCount
Total number of ports (base and uplink) present on this
module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.9
atiStkSwSysBasePortType
The hardware type of a base port on this module.
AtiPortType
Type Values:
1other
2notPresent
3mgmt
4tenBaseT
5hundredBaseT
6hundredBaseFX-VF
7hundredBaseFX-MT
8hundredBaseFX-SC
9hundredBaseFX-LC
10thousandBaseT
11gigabit
12gigabitSX
13gigabitSX-SC
14gigabitSX-MT
15gigabitSX-VF
16gigabitSX-LC
17gigabitLX
18gigabitLX-SC
19gigabitLX-MT
20gigabitLX-VF
21gigabitLX-LC
22sm15
23ten-gigabit
 .1.3.6.1.4.1.207.8.17.1.3.1.10
atiStkSwSysBasePortCount
Total number of base ports present on this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.11
atiStkSwSysUplinkAModelName
The model name of the uplink #A connector of this module.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.3.1.12
atiStkSwSysUplinkAPortType
The hardware type of a port present in the uplink #A
connector of this module.
AtiPortType
Type Values:
1other
2notPresent
3mgmt
4tenBaseT
5hundredBaseT
6hundredBaseFX-VF
7hundredBaseFX-MT
8hundredBaseFX-SC
9hundredBaseFX-LC
10thousandBaseT
11gigabit
12gigabitSX
13gigabitSX-SC
14gigabitSX-MT
15gigabitSX-VF
16gigabitSX-LC
17gigabitLX
18gigabitLX-SC
19gigabitLX-MT
20gigabitLX-VF
21gigabitLX-LC
22sm15
23ten-gigabit
 .1.3.6.1.4.1.207.8.17.1.3.1.13
atiStkSwSysUplinkAPortCount
Total number of uplink #A ports present on this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.14
atiStkSwSysUplinkAPortIdBase
The ID of the first port in uplink #A of this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.15
atiStkSwSysUplinkAPortIdLimit
The ID of the last port in uplink #A of this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.16
atiStkSwSysUplinkBModelName
The model name of the uplink #B connector of this module.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.3.1.17
atiStkSwSysUplinkBPortType
The hardware type of a port present in the uplink #B
connector of this module.
AtiPortType
Type Values:
1other
2notPresent
3mgmt
4tenBaseT
5hundredBaseT
6hundredBaseFX-VF
7hundredBaseFX-MT
8hundredBaseFX-SC
9hundredBaseFX-LC
10thousandBaseT
11gigabit
12gigabitSX
13gigabitSX-SC
14gigabitSX-MT
15gigabitSX-VF
16gigabitSX-LC
17gigabitLX
18gigabitLX-SC
19gigabitLX-MT
20gigabitLX-VF
21gigabitLX-LC
22sm15
23ten-gigabit
 .1.3.6.1.4.1.207.8.17.1.3.1.18
atiStkSwSysUplinkBPortCount
Total number of uplink #B ports present on this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.19
atiStkSwSysUplinkBPortIdBase
The ID of the first port in uplink #B of this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.20
atiStkSwSysUplinkBPortIdLimit
The ID of the last port in uplink #B of this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.21
atiStkSwSysRPSPresent
This object shows the presence of the RPS (Redundant Power Supply.)

Note: This is not available on the 83xx switch family.
Enumeration
Enumerated Values:
1connected
2disconnected
 .1.3.6.1.4.1.207.8.17.1.3.1.22
atiStkSwSysRPSState
This object shows if the connected RPS is on (supplying power)
or off (not supplying power) to this switch.

Note: This is not available on the 83xx switch family.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.207.8.17.1.3.1.23
atiStkSwSysDCState
This object shows if the main Power Source is DC.

Note: If this is Off and RPS State is off, then the
AC Main is supllying power.

Note: This is not available on the 83xx switch family.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.207.8.17.1.3.1.24
atiStkSwSysTemperatureLimitValue
This object specifies the temperature value when it is above the
Warning or Error limits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.3.1.25

atiStkSwSysUplinkInfoTable

table
.1.3.6.1.4.1.207.8.17.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwSysUplinkInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwSysUplinkInfoTable' 
This table contains a list of uplinks present in the switch
stack and their associated hardware information.
atiStkSwSysUplinkInfoEntry row .1.3.6.1.4.1.207.8.17.1.4.1
This object specifies an entry in 'atiStkSwSysUplinkInfoTable'
that describes the hardware informaton for a uplink present in
the switch stack. **Note:This table may only be available with 94xx
series of switches. Pleas…
Indexes
Column Syntax OID
atiStkSwSysUplinkModuleId
The ID of this module.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.4.1.1
atiStkSwSysUplinkPortId
The ID (port number) of the this port (uplink) of this module.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.207.8.17.1.4.1.2
atiStkSwSysUplinkSetup
The fixation of the uplink. Fixed types are GBICs, SFPs or XFPs
that are an integral part of the sytem. Disjoint items are applique
or module slots that are determined purely by the attached device.
Enumeration
Enumerated Values:
1fixed
2pluggable
 .1.3.6.1.4.1.207.8.17.1.4.1.3
atiStkSwSysUplinkType
The module type of the uplink connector of this module.
AtiUplinkType
Type Values:
1notPresent
2other
3applique-at-45-sc-sm
4applique-at-45-sc
5applique-at-45-mt
6applique-at-46
7applique-at-47
8sfp
9gbic
10xfp
 .1.3.6.1.4.1.207.8.17.1.4.1.4
atiStkSwSysUplinkDetails
This field will provide additional details to the Uplink.
For GBIC, SFP or XFP, it may contain information on the
installed devices (e.g. 1000-SX, 1000-T, etc). For applique
types, it may have the name (e.g. A-47) and …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.1.4.1.5
atiStkSwSysUplinkPortType
The hardware type of a port present in the uplink
connector of this module.
AtiPortType
Type Values:
1other
2notPresent
3mgmt
4tenBaseT
5hundredBaseT
6hundredBaseFX-VF
7hundredBaseFX-MT
8hundredBaseFX-SC
9hundredBaseFX-LC
10thousandBaseT
11gigabit
12gigabitSX
13gigabitSX-SC
14gigabitSX-MT
15gigabitSX-VF
16gigabitSX-LC
17gigabitLX
18gigabitLX-SC
19gigabitLX-MT
20gigabitLX-VF
21gigabitLX-LC
22sm15
23ten-gigabit
 .1.3.6.1.4.1.207.8.17.1.4.1.6

atiStkSwTemperatureInfoTable

table
.1.3.6.1.4.1.207.8.17.1.6.1 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwTemperatureInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwTemperatureInfoTable' 
This table contains a list of system temperature information present 
in the switch stack including voltage and temperature.
atiStkSwTemperatureInfoEntry row .1.3.6.1.4.1.207.8.17.1.6.1.1
This object specifies an entry in 'atiStkSwTemperatureInfoTable'
that describes the hardware informaton for a module present in
the switch stack.
Indexes
Column Syntax OID
atiStkSwTemperatureInfoModuleId
The module Id of a switch, it also used as an index of the table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.6.1.1.1
atiStkSwTemperatureInfoTemperature
The temperature of the device in Celcius.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.6.1.1.2

atiStkSwFanInfoTable

table
.1.3.6.1.4.1.207.8.17.1.6.2 · 1 row entry · 4 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwFanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwFanInfoTable' 
This table contains information for all the fans present 
in the switch.
atiStkSwFanInfoEntry row .1.3.6.1.4.1.207.8.17.1.6.2.1
This object specifies an entry in 'atiStkSwFanInfoTable'
that describes the informaton for a specific fan in
the switch.
Indexes
Column Syntax OID
atiStkSwFanInfoModuleId
The module Id of the switch.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.6.2.1.1
atiStkSwFanInfoFanId
The fan Id of the switch.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.6.2.1.2
atiStkSwFanInfoState
The state of the fan running, either normal or off.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.207.8.17.1.6.2.1.3
atiStkSwFanInfoSpeed
The current speed of a fan.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.207.8.17.1.6.2.1.4

atiStkSwVoltageInfoTable

table
.1.3.6.1.4.1.207.8.17.1.6.3 · 1 row entry · 4 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwVoltageInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwVoltageInfoTable' 
This table contains a list of system Voltage information.
atiStkSwVoltageInfoEntry row .1.3.6.1.4.1.207.8.17.1.6.3.1
This object specifies an entry in 'atiStkSwVoltageInfoTable'
that describes the Voltage informaton for the switch.
Indexes
Column Syntax OID
atiStkSwVoltageInfoModuleId
The module Id of the switch.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.6.3.1.1
atiStkSwVoltageInfoIndex
The index of the voltage table.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.207.8.17.1.6.3.1.2
atiStkSwVoltageInfoLevel
The voltage input level.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.207.8.17.1.6.3.1.3
atiStkSwVoltageInfoMeasured
The current voltage.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.207.8.17.1.6.3.1.4

atiStkSwCPUInfoTable

table
.1.3.6.1.4.1.207.8.17.1.6.4 · 1 row entry · 4 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwCPUInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwCPUInfoTable' 
This table contains information about the cpu utilization over 
different periods of time.
atiStkSwCPUInfoEntry row .1.3.6.1.4.1.207.8.17.1.6.4.1
This object specifies an entry in 'atiStkSwCPUInfoTable'
that describes the cpu informaton for the switch.
Indexes
Column Syntax OID
atiStkSwCPUInfoModuleId
The module Id of the switch.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.6.4.1.1
atiStkSwCPUInfoAvgLastMinute
Average CPU utilization over the past minute.
Expressed as a percentage.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.207.8.17.1.6.4.1.2
atiStkSwCPUInfoAvgLast20Seconds
Average CPU utilization over the past twenty seconds.
Expressed as a percentage.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.207.8.17.1.6.4.1.3
atiStkSwCPUInfoAvgSecond
Average CPU utilization over the past second.
Expressed as a percentage.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.207.8.17.1.6.4.1.4

atiStkSwMemoryInfoTable

table
.1.3.6.1.4.1.207.8.17.1.6.5.1 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwMemoryInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwMemoryInfoTable' 
This table contains information about memory size on module.
atiStkSwMemoryInfoEntry row .1.3.6.1.4.1.207.8.17.1.6.5.1.1
This object specifies an entry in 'atiStkSwMemoryInfoTable'
that describes the memory size for the switch.
Indexes
Column Syntax OID
atiStkSwMemoryInfoModuleId
The module Id of the switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.1.1.1
atiStkSwMemoryInfoTotalBuffers
Size of memory buffer(kB).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.1.1.2

atiStkSwMemoryPoolTable

table
.1.3.6.1.4.1.207.8.17.1.6.5.2 · 1 row entry · 5 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwMemoryPoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwMemoryPoolTable' 
This table contains information about each memory pool.
atiStkSwMemoryPoolEntry row .1.3.6.1.4.1.207.8.17.1.6.5.2.1
This object specifies an entry in 'atiStkSwMemoryPoolTable'
that describes the total and free size of each memory pool.
Indexes
Column Syntax OID
atiStkSwMemoryPoolModuleId
The module Id of the switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.2.1.1
atiStkSwMemoryPoolIndex
The index of memory pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.2.1.2
atiStkSwMemoryPoolName
The name of memory pool.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.1.6.5.2.1.3
atiStkSwMemoryPoolTotal
Size of memory pool(kB).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.2.1.4
atiStkSwMemoryPoolFree
Size of free memory pool(kB).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.2.1.5

atiStkSwMemoryComBuffersTable

table
.1.3.6.1.4.1.207.8.17.1.6.5.3 · 1 row entry · 3 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwMemoryComBuffersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwMemoryComBuffersTable' 
This table contains information about communication buffers on 
module.
atiStkSwMemoryComBuffersEntry row .1.3.6.1.4.1.207.8.17.1.6.5.3.1
This object specifies an entry in 'atiStkSwMemoryComBuffersTable'
that describes the communication buffers.
Indexes
Column Syntax OID
atiStkSwMemoryComBuffersModuleId
The module Id of the switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.3.1.1
atiStkSwMemoryTotalComBuffers
Total number of communication buffers.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.3.1.2
atiStkSwMemoryFreeComBuffers
Free communication buffers still available.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.1.6.5.3.1.3

atiStkSwSysMgmtACLConfigTable

table
.1.3.6.1.4.1.207.8.17.1.7.2 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwSysMgmtACLConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwSysMgmtACLConfigTable' 
This table contains a list of MgmtACLs present in the switch
stack and their associated hardware information.
atiStkSwSysMgmtACLConfigEntry row .1.3.6.1.4.1.207.8.17.1.7.2.1
This object specifies an entry in 'atiStkSwSysMgmtACLConfigTable'
that allow the user controls which management stations can remotely
manage the device using the Telnet application protocol or a web
browser.
Indexes
Column Syntax OID
atiStkSwSysMgmtACLConfigModuleId
The ID of this module.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.1.7.2.1.1
atiStkSwSysMgmtACLConfigId
The ID of the Management ACL Table for this module.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.207.8.17.1.7.2.1.2
atiStkSwSysMgmtACLConfigIpAddr
The IP Address of the specific management station.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.207.8.17.1.7.2.1.3
atiStkSwSysMgmtACLConfigMask
The subnet mask of the IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.207.8.17.1.7.2.1.4
atiStkSwSysMgmtACLConfigApplication
This object specify which interface the user want the management
station to be able to use when managing the switch. The options are :
telnet, web, ping, all. Note that the enum value correspond to the
bit position of …
Bitsr/w
Enumerated Values:
0telnet
1web
2ping
 .1.3.6.1.4.1.207.8.17.1.7.2.1.5
atiStkSwSysMgmtACLConfigRowStatus
The Row Status of the Mgmt ACL table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.1.7.2.1.6

atiStkSwPortConfigTable

table
.1.3.6.1.4.1.207.8.17.2.1 · 1 row entry · 16 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwPortConfigTable' 
This table contains a list of physical ports present in the
switch and their associated attributes.
atiStkSwPortConfigEntry row .1.3.6.1.4.1.207.8.17.2.1.1
This object specifies an entry in 'atiStkSwPortConfigTable'
that describes the attributes associated with a physical port
present in the switch.
Indexes
Column Syntax OID
atiStkSwModuleId
This object specifies the ID of a module present in the switch
stack.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.2.1.1.1
atiStkSwPortId
This object specifies the ID of a port present on a given
module.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.207.8.17.2.1.1.2
atiStkSwPortName
The user-defined ASCII name of the port.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.207.8.17.2.1.1.3
atiStkSwPortState
This object allows the user to either enabled or disabled.
This object can be read to obtain the current state of the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.207.8.17.2.1.1.4
atiStkSwPortLinkState
This object specifies the link state on this port.
Enumeration
Enumerated Values:
1online
2offline
 .1.3.6.1.4.1.207.8.17.2.1.1.5
atiStkSwPortNegotiation
This object allows an admin request to configure the port
to either autosense or one of the different speed-duplex
combinations.
Enumerationr/w
Enumerated Values:
1autosense
2forceHalfDuplex-10M
3forceHalfDuplex-100M
4forceHalfDuplex-1G
5forceFullDuplex-10M
6forceFullDuplex-100M
7forceFullDuplex-1G
8autoHalfDuplex-10M
9autoHalfDuplex-100M
10autoFullDuplex-10M
11autoFullDuplex-100M
 .1.3.6.1.4.1.207.8.17.2.1.1.6
atiStkSwPortSpeed
This object specifies the current speed of the port.
Enumeration
Enumerated Values:
1unknown
2speed-10M
3speed-100M
4speed-1G
 .1.3.6.1.4.1.207.8.17.2.1.1.7
atiStkSwPortDuplexStatus
This object specifies the current duplex type used by the
port.
Enumeration
Enumerated Values:
1unknown
2halfDuplex
3fullDuplex
 .1.3.6.1.4.1.207.8.17.2.1.1.8
atiStkSwPortFlowControl
This object is used to enable/disable flow control on the
port. When enabled, flow control will be full duplex.

Flow control is disabled by default.
Enumerationr/w
Enumerated Values:
1unknown
2disable
3enable
 .1.3.6.1.4.1.207.8.17.2.1.1.9
atiStkSwPortBackPressure
This object is used to enable/disable Back Pressure on the
port.

Back Pressure is disabled by default.
Enumerationr/w
Enumerated Values:
1unknown
2disable
3enable
 .1.3.6.1.4.1.207.8.17.2.1.1.10
atiStkSwPortPriority
This object specifies whether packets flowing through this
port use the associated VLAN priority or override the
associated VLAN priority with either a high or a low priority.


This MIB is n…
Enumerationr/w
Enumerated Values:
1use-vlan-priority
2override-and-use-low-priority
3override-and-use-high-priority
 .1.3.6.1.4.1.207.8.17.2.1.1.11
atiStkSwPortBroadcastProcessing
This object specifies whether the received broadcast packets
should be processed or discarded.

Broadcast packets are processed by default.
Enumerationr/w
Enumerated Values:
1discard-broadcasts
2do-not-discard-broadcasts
 .1.3.6.1.4.1.207.8.17.2.1.1.12
atiStkSwPortMDIO
This object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix.
Enumerationr/w
Enumerated Values:
1mdi
2mdix
3auto-mdix
 .1.3.6.1.4.1.207.8.17.2.1.1.13
atiStkSwPortHOLLimit
This object allows user to set the head of line blocking limit.

Note (94xx): Range upto 8191 is supported for Gigabit Ports.
Integer32r/w
Constraints:
range: 0-61440
 .1.3.6.1.4.1.207.8.17.2.1.1.14
atiStkSwPortBackPressureLimit
This object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix. This limit can be used
for both BackPressure and FlowCont…
Integer32r/w
Constraints:
range: 1-57344
 .1.3.6.1.4.1.207.8.17.2.1.1.15
atiStkSwPortSTPState
This object specifies the spanning tree state on this port.

This object is not applicable to 8300 series products. This
object is not valid on the 9400 series of boxes.
Enumeration
Enumerated Values:
1unknown
2disabled
3blocking
4listening
5learning
6forwarding
 .1.3.6.1.4.1.207.8.17.2.1.1.16

atiStkSwPortIntrusionDetectionTable

table
.1.3.6.1.4.1.207.8.17.2.4 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwPortIntrusionDetectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwPortIntrusionDetectionTable' 
This table contains a list of modules and their associated
port security -related intrusion detection options. This table
is valid only when 'atiStkSwPortSecurityMode' is set to a
value other than 'automatic(1)'.
          
This table object is not applicable to 8500 and 9400 series products.
atiStkSwPortIntrusionDetectionEntry row .1.3.6.1.4.1.207.8.17.2.4.1
This object specifies an entry in
'atiStkSwPortIntrusionDetectionTable' that describes port
security -related intruder detection configuration associated
with a module.
Indexes
Column Syntax OID
atiStkSwPortIntrusionDetectionAction
This object specifies the security action that should be
taken when an intrusion is detected.
Enumerationr/w
Enumerated Values:
1do-nothing
2send-trap-only
3disable-port-and-send-trap
 .1.3.6.1.4.1.207.8.17.2.4.1.1
atiStkSwPortIntrusionDetectionPortList
This object specifies a list of ports on this module that
participate in intrusion detection.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.2.4.1.2

atiStkPortSecurityConfigTable

table
.1.3.6.1.4.1.207.8.17.2.5 · 1 row entry · 4 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkPortSecurityConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkPortSecurityConfigTable' 
This table contains the port security attributes of a list of
physical ports present in the switch.
          
This table object is not applicable to 8300 series products.
atiStkPortSecurityConfigEntry row .1.3.6.1.4.1.207.8.17.2.5.1
This object specifies an entry in
'atiStkPortSecurityConfigTable' that describes the port
security attributes associated with a physical port present in
the switch.
Indexes
Column Syntax OID
atiStkPortSecurityMode
This object specifies the type of port security configured
on the switch.

Setting this object to 'automatic(1)' allows the ports to learn
new MAC addresses normally. In 'limited(2)' mode, only a
limited n…
Enumerationr/w
Enumerated Values:
1automatic
2limited
3secured
4locked
 .1.3.6.1.4.1.207.8.17.2.5.1.1
atiStkPortSecurityThreshold
This object specifies the security threshold on this port. It
is applicable only if the port security mode (specified by
'portSecurityMode') is set to 'limited(2)' mode.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.207.8.17.2.5.1.2
atiStkPortIntrusionAction
This object specifies the security action that should be
taken when an intrusion is detected.

By default, port intrusion action is set to 'discard' mode.
Enumerationr/w
Enumerated Values:
1discard
2send-trap
3disable-port
 .1.3.6.1.4.1.207.8.17.2.5.1.3
atiStkPortIntrusionActionStatus
This object enables or disables the security action specified
by the 'portIntrusionAction'.

By default, port intrusion action is disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.207.8.17.2.5.1.4

atiStkPortDOSAttackConfigTable

table
.1.3.6.1.4.1.207.8.17.2.6.3 · 1 row entry · 4 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkPortDOSAttackConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkPortDOSAttackConfigTable' 
This table contains the port DOS (denial of service) attack 
configuration attributes of a list of physical ports present in the 
switch.
          
This table object is not applicable to 8300 series products.
atiStkPortDOSAttackConfigEntry row .1.3.6.1.4.1.207.8.17.2.6.3.1
This object specifies an entry in
'atiStkPortDOSAttackConfigTable' that describes the port
DOS attack configuration attributes associated with a physical port
present in the switch.
Indexes
Column Syntax OID
atiStkSwPortDOSAttackType
This object specifies the type of Port DOS attack configured
on the switch.
Enumerationr/w
Enumerated Values:
1syn-flood
2smurf
3land
4ip-option
5teardrop
6ping-of-death
 .1.3.6.1.4.1.207.8.17.2.6.3.1.1
atiStkSwPortDOSAttackActionStatus
This object enables or disables the port DOS action specified
by the 'atiStkSwPortDOSAttackType'.

By default, port DOS attack action is disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.207.8.17.2.6.3.1.2
atiStkSwPortDOSAttackMirrorPortobsolete
This object specifies the mirror port number to which the packet are
to be mirrored for the DOS attack as specified by
atiStkSwPortDOSAttackType.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.2.6.3.1.3
atiStkSwPortDOSAttackMirrorPortStatus
This object enables or disables mirroring of attack packets. If
enabled, all potential attack packets are mirrored to the port
specified by atiStkSwPortMirroringDestinationModuleId and
atiStkSwPortMirroringDestinatio…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.207.8.17.2.6.3.1.4

atiStkSwIntrusionAttackTable

table
.1.3.6.1.4.1.207.8.17.2.7 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwIntrusionAttackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwIntrusionAttackTable' 
This object specifies an entry in 'atiStkSwIntrusionAttackTable'
that describes the intruder attack associated with a physical port
present in the switch.
atiStkSwIntrusionAttackEntry row .1.3.6.1.4.1.207.8.17.2.7.1
This object specifies an entry in 'atiStkSwIntrusionAttackTable'
that describes the intruder attack associated with a physical port
present in the switch.
Indexes
Column Syntax OID
atiStkSwIntruderAttackVlanId
This object identifies the intruding VlanId on the port for
this module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.2.7.1.1
atiStkSwIntruderAttackMacAddr
This object identifies the intruding MAC address on the port for
this module.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.207.8.17.2.7.1.2

atiStkSwPortStormDetectCurrentTable

table
.1.3.6.1.4.1.207.8.17.2.8 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwPortStormDetectCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwPortStormDetectCurrentTable' 
This table contains the current Storm Detection informations of a list
of physical ports present in the switch.
atiStkSwPortStormDetectCurrentEntry row .1.3.6.1.4.1.207.8.17.2.8.1
This object specifies an entry in
'atiStkSwPortStormDetectCurrentTable' that describes the current
Storm Detection informations with a physical port present in the
switch.
Indexes
Column Syntax OID
atiStkSwPortStormDetectCurrentHighStatus
This object specifies the current high rate status of Storm
Detection.
Enumeration
Enumerated Values:
1inactive
2normal
3detected
4blocking
 .1.3.6.1.4.1.207.8.17.2.8.1.1
atiStkSwPortStormDetectCurrentHighAction
This object specifies the current high rate action by Storm Detected.
Enumeration
Enumerated Values:
1unknown
2none
3port-disabled
4linkdown
5broadcast-discard
 .1.3.6.1.4.1.207.8.17.2.8.1.2
atiStkSwPortStormDetectCurrentHighExpiry
This object specifies the remaining time(sec) to back to normal status
from blocking status of high rate. A value of -1 indicates that
Blocktimeout has been set 'None' or Storm Detection is 'Normal'
status.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.2.8.1.3
atiStkSwPortStormDetectCurrentLowStatus
This object specifies the current low rate status of Storm Detection.
Enumeration
Enumerated Values:
1inactive
2normal
3detected
4blocking
 .1.3.6.1.4.1.207.8.17.2.8.1.4
atiStkSwPortStormDetectCurrentLowAction
This object specifies the current low rate action by Storm Detected.
Enumeration
Enumerated Values:
1unknown
2none
3port-disabled
4linkdown
5broadcast-discard
 .1.3.6.1.4.1.207.8.17.2.8.1.5
atiStkSwPortStormDetectCurrentLowExpiry
This object specifies the remaining time(sec) to back to normal loop
status from blocking status of low rate. A value of -1 indicates that
Blocktimeout has been set 'None' or Storm Detection is 'Normal'
status.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.2.8.1.6

atiStkSwPortLoopDetectCurrentTable

table
.1.3.6.1.4.1.207.8.17.2.9 · 1 row entry · 4 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwPortLoopDetectCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwPortLoopDetectCurrentTable' 
This table contains the current Loop Detection informations of a list
of physical ports present in the switch.
atiStkSwPortLoopDetectCurrentEntry row .1.3.6.1.4.1.207.8.17.2.9.1
This object specifies an entry in
'atiStkSwPortLoopDetectCurrentTable' that describes the current
Loop Detection informations with a physical port present in the
switch.
Indexes
Column Syntax OID
atiStkSwPortLoopDetectCurrentStatus
This object specifies the current loop status of Loop Detection.
Enumeration
Enumerated Values:
1inactive
2normal
3detected
4blocking
 .1.3.6.1.4.1.207.8.17.2.9.1.1
atiStkSwPortLoopDetectCurrentAction
This object specifies the current loop action by Loop Detected.
Enumeration
Enumerated Values:
1unknown
2none
3port-disabled
4linkdown
5broadcast-discard
 .1.3.6.1.4.1.207.8.17.2.9.1.2
atiStkSwPortLoopDetectCurrentExpiry
This object specifies the remaining time(sec) to back to normal status
from blocking status. A value of -1 indicates that Blocktimeout has
been set 'None' or Loop Detection is 'Normal' status.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.2.9.1.3
atiStkSwPortLoopDetectCurrentVlanId
The ID of the VLAN loop occured.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.2.9.1.4

atiStkSwVlanConfigTable

table
.1.3.6.1.4.1.207.8.17.3.1 · 1 row entry · 20 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwVlanConfigTable' 
This table contains a list of VLANs configured on the switch.
atiStkSwVlanConfigEntry row .1.3.6.1.4.1.207.8.17.3.1.1
This object specifies an entry in 'atiStkSwVlanConfigTable'
that describes a VLAN configured on the switch.
Indexes
Column Syntax OID
atiStkSwVlanId
The VLAN ID of this VLAN as stored in the tag information
header in accordance with the 802.1q specifications.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.207.8.17.3.1.1.1
atiStkSwVlanName
The name of the VLAN.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.207.8.17.3.1.1.2
atiStkSwVlanTaggedPortListModule1
This object specifies a list of tagged ports (on module #1)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.3
atiStkSwVlanUntaggedPortListModule1
This object specifies a list of untagged ports (on module #1)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.4
atiStkSwVlanTaggedPortListModule2
This object specifies a list of tagged ports (on module #2)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.5
atiStkSwVlanUntaggedPortListModule2
This object specifies a list of untagged ports (on module #2)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.6
atiStkSwVlanTaggedPortListModule3
This object specifies a list of tagged ports (on module #3)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.7
atiStkSwVlanUntaggedPortListModule3
This object specifies a list of untagged ports (on module #3)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.8
atiStkSwVlanTaggedPortListModule4
This object specifies a list of tagged ports (on module #4)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.9
atiStkSwVlanUntaggedPortListModule4
This object specifies a list of untagged ports (on module #4)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.10
atiStkSwVlanTaggedPortListModule5
This object specifies a list of tagged ports (on module #5)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.11
atiStkSwVlanUntaggedPortListModule5
This object specifies a list of untagged ports (on module #5)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.12
atiStkSwVlanTaggedPortListModule6
This object specifies a list of tagged ports (on module #6)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.13
atiStkSwVlanUntaggedPortListModule6
This object specifies a list of untagged ports (on module #6)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.14
atiStkSwVlanTaggedPortListModule7
This object specifies a list of tagged ports (on module #7)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.15
atiStkSwVlanUntaggedPortListModule7
This object specifies a list of untagged ports (on module #7)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.16
atiStkSwVlanTaggedPortListModule8
This object specifies a list of tagged ports (on module #8)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.17
atiStkSwVlanUntaggedPortListModule8
This object specifies a list of untagged ports (on module #8)
that participate in this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.18
atiStkSwVlanConfigEntryStatus
The current status of this VLAN entry.
Please note the RowStatus implementation details.

VLANs can be created with a CreateandWait or CreateAndGo RowStatus.
When using CreateAndGo all fields must be vali…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.3.1.1.19
atiStkSwVlanActualUntaggedPortListModule1
This object specifies the list of actual untagged ports that are
participating in this VLAN. The untagged port membership can be
temporarily changed by 802.1x Dynamic VLAN or Guest VLAN features.
The currently effec…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.3.1.1.20

atiStkSwPort2VlanTable

table
.1.3.6.1.4.1.207.8.17.3.2 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwPort2VlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwPort2VlanTable' 
This tables contains a list of ports in the switch and their
associated VLAN configuration information.
atiStkSwPort2VlanEntry row .1.3.6.1.4.1.207.8.17.3.2.1
This object specifies an entry in 'atiStkSwPort2VlanTable'
that describes the VLAN information associated with a given
module/port.
Indexes
Column Syntax OID
atiStkSwPortVlanId
The ID of the VLAN to which this port belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.3.2.1.1
atiStkSwPortVlanName
The name of the VLAN to which this port belongs.
OctetString
Constraints:
range: 0-19
 .1.3.6.1.4.1.207.8.17.3.2.1.2

atiStkSwMacAddr2VlanTable

table
.1.3.6.1.4.1.207.8.17.3.3 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwMacAddr2VlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwMacAddr2VlanTable' 
This table contains a list of MAC addresses (in the
forwarding table of the switch) and the associated VLAN to
which each MAC address belongs.
atiStkSwMacAddr2VlanEntry row .1.3.6.1.4.1.207.8.17.3.3.1
This object specifies an entry in 'atiStkSwMacAddr2VlanTable'
that associates a MAC address (in the forwarding table of the
switch) with the VLAN to which the address belongs.
Indexes
Column Syntax OID
atiStkSwMacAddress
A MAC address from the forwarding table of the switch.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.207.8.17.3.3.1.1
atiStkSwMacAddrVlanId
The ID of the VLAN to which this MAC address belongs.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.207.8.17.3.3.1.2
atiStkSwMacAddrVlanName
The name of the VLAN to which this MAC address belongs.
OctetString
Constraints:
range: 0-19
 .1.3.6.1.4.1.207.8.17.3.3.1.3
atiStkSwMacAddrModuleId
The module ID on which this MAC address entry exists.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.3.3.1.4
atiStkSwMacAddrPortId
The port ID (on the module specified by
'atiStkSwMacAddrModuleId') on which this MAC address entry
exists. This will display 0 for a multicast mac address.
Please check the PortList for the Multicast details.
Note: This…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.3.3.1.5
atiStkSwMacAddrPortList
The port List (on the module specified by
'atiStkSwMacAddrModuleId') on which this MAC address entry
exists. This is shown as U: Untagged Ports T: Tagged Ports.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.3.3.1.6

atiStkSwGVRPPortConfigTable

table
.1.3.6.1.4.1.207.8.17.3.7 · 1 row entry · 3 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwGVRPPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwGVRPPortConfigTable' 
This table is configuring the GVRP Vlan base on each port.
atiStkSwGVRPPortConfigEntry row .1.3.6.1.4.1.207.8.17.3.7.1
This object specifies an entry in 'atiStkSwGVRPPortConfigTable'.
Indexes
Column Syntax OID
atiStkSwGVRPPortConfigModuleId
An ID that indicate which module it refer to for stacking.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.3.7.1.1
atiStkSwGVRPPortConfigPortId
Port Index.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.207.8.17.3.7.1.2
atiStkSwGVRPPortConfigStatus
Port Status for GVRP Vlan either Normal or Mode can be set.
Enumerationr/w
Enumerated Values:
1none
2normal
 .1.3.6.1.4.1.207.8.17.3.7.1.3

atiStkSwGVRPCountersTable

table
.1.3.6.1.4.1.207.8.17.3.8 · 1 row entry · 26 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwGVRPCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwGVRPCountersTable' 
This table is configuring the GVRP Vlan base on each port.
atiStkSwGVRPCountersEntry row .1.3.6.1.4.1.207.8.17.3.8.1
This object specifies an entry in 'atiStkSwGVRPCountersTable'.
Indexes
Column Syntax OID
atiStkSwGVRPCountersModuleId
An ID that indicate which module it refer to for stacking.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.3.8.1.1
atiStkSwGVRPCountersGARPRxPkt
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.2
atiStkSwGVRPCountersInvalidGARPRxPkt
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.3
atiStkSwGVRPCountersGARPTxPkt
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.4
atiStkSwGVRPCountersGARPTxDisabled
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.5
atiStkSwGVRPCountersPortNotSending
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.6
atiStkSwGVRPCountersGARPDisabled
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.7
atiStkSwGVRPCountersPortNotListening
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.8
atiStkSwGVRPCountersInvalidPort
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.9
atiStkSwGVRPCountersInvalidProtocol
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.10
atiStkSwGVRPCountersInvalidFormat
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.11
atiStkSwGVRPCountersDatabaseFull
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.12
atiStkSwGVRPCountersRxMsgLeaveAll
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.13
atiStkSwGVRPCountersRxMsgJoinEmpty
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.14
atiStkSwGVRPCountersRxMsgJoinIn
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.15
atiStkSwGVRPCountersRxMsgLeaveEmpty
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.16
atiStkSwGVRPCountersRxMsgLeaveIn
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.17
atiStkSwGVRPCountersRxMsgEmpty
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.18
atiStkSwGVRPCountersRxMsgBadMsg
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.19
atiStkSwGVRPCountersRxMsgBadAttribute
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.20
atiStkSwGVRPCountersTxMsgLeaveAll
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.21
atiStkSwGVRPCountersTxMsgJoinEmpty
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.22
atiStkSwGVRPCountersTxMsgJoinIn
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.23
atiStkSwGVRPCountersTxMsgLeaveEmpty
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.24
atiStkSwGVRPCountersTxMsgLeaveIn
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.25
atiStkSwGVRPCountersTxMsgEmpty
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.17.3.8.1.26

atiStkSwStaticMacAddrTable

table
.1.3.6.1.4.1.207.8.17.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwStaticMacAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwStaticMacAddrTable' 
This table contains a list of static MAC address configured
on the switch.
atiStkSwStaticMacAddrEntry row .1.3.6.1.4.1.207.8.17.4.1.1
This object is an entry in 'atiStkSwStaticMacAddrTable' that
describes a static MAC address configured on a given module
and port.
Indexes
Column Syntax OID
atiStkSwStaticMacAddress
This object identifies the static MAC address of this entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.207.8.17.4.1.1.1
atiStkSwStaticMacAddrVlanId
The ID of the VLAN on which this static MAC address entry is
configured.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.207.8.17.4.1.1.2
atiStkSwStaticMacAddrModuleId
The module ID on which this static MAC address entry is
configured.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.4.1.1.3
atiStkSwStaticMacAddrPortId
The port ID (on the module specified by
'atiStkSwStaticMacAddrModuleId') on which this static MAC
address entry is configured.
Note: a) When defining a list this value must be 0.
b) This is on track to be deprecat…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.4.1.1.4
atiStkSwStaticMacAddrPortList
The port list (on the module specified by
'atiStkSwStaticMacAddrModuleId') on which this static MAC
address entry is configured. This can be a single port for
a unicast address or multiple ports for a multicast address.…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.4.1.1.5
atiStkSwStaticMacAddrEntryStatus
The current status of this static MAC address entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.4.1.1.6

atiStkSwEthModuleMonTable

table
.1.3.6.1.4.1.207.8.17.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwEthModuleMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwEthModuleMonTable' 
This table contains a list of modules and their associated
ethernet statistics (measured on the module as a whole).
atiStkSwEthModuleMonEntry row .1.3.6.1.4.1.207.8.17.5.1.1
This object specifies an entry in 'atiStkSwEthModuleMonTable'
that describes the ethernet statistics measured on a given
module as a whole.
Indexes
Column Syntax OID
atiStkSwEthModuleMonTxGoodFrames
The total number of good frames transmitted by this module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.1.1.1
atiStkSwEthModuleMonRxGoodFrames
The total number of good frames received by this module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.1.1.2
atiStkSwEthModuleMonTxTotalBytes
The total number of bytes transmitted by this module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.1.1.3
atiStkSwEthModuleMonTxBroadcastFrames
The total number of broadcast frames transmitted from this
module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.1.1.4
atiStkSwEthModuleMonTxMulticastFrames
The total number of multicast frames transmitted from this
module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.1.1.5
atiStkSwEthModuleMonRxOverrunFrames
The total number of oversized frames received on this module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.1.1.6

atiStkSwEthModuleErrTable

table
.1.3.6.1.4.1.207.8.17.5.2 · 1 row entry · 3 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwEthModuleErrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwEthModuleErrTable' 
This table contains a list of modules and their associated
ethernet error statistics (measured on the module as a whole).
atiStkSwEthModuleErrEntry row .1.3.6.1.4.1.207.8.17.5.2.1
This object specifies an entry in 'atiStkSwEthModuleErrTable'
that describes the ethernet error statistics measured on a
given module as a whole.
Indexes
Column Syntax OID
atiStkSwEthModuleErrRxCRC
The total number of CRC errors on packets received on this
module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.2.1.1
atiStkSwEthModuleErrRxBadFrames
The total number of bad frames received on this module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.2.1.2
atiStkSwEthModuleErrCollisions
The number of times a collision was detected on this module.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.2.1.3

atiStkSwEthPortMonTable

table
.1.3.6.1.4.1.207.8.17.5.3 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwEthPortMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwEthPortMonTable' 
This table contains a list of ports and their associated
ethernet statistics.
atiStkSwEthPortMonEntry row .1.3.6.1.4.1.207.8.17.5.3.1
This object specifies an entry in 'atiStkSwEthPortMonTable'
that describes the ethernet statistics measured on a given
module/port.
Indexes
Column Syntax OID
atiStkSwEthPortMonTxGoodFrames
The total number of good frames transmitted by this port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.3.1.1
atiStkSwEthPortMonRxGoodFrames
The total number of good frames received by this port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.3.1.2
atiStkSwEthPortMonTxTotalBytes
The total number of bytes transmitted by this port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.3.1.3
atiStkSwEthPortMonTxBroadcastFrames
The total number of broadcast frames transmitted from this
port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.3.1.4
atiStkSwEthPortMonTxMulticastFrames
The total number of broadcast frames transmitted from this
port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.3.1.5
atiStkSwEthPortMonRxOverrunFrames
The total number of oversized frames received on this port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.3.1.6

atiStkSwEthPortErrTable

table
.1.3.6.1.4.1.207.8.17.5.4 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwEthPortErrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwEthPortErrTable' 
This table contains a list of ports and their associated
ethernet error statistics.
atiStkSwEthPortErrEntry row .1.3.6.1.4.1.207.8.17.5.4.1
This object specifies an entry in 'atiStkSwEthPortErrTable'
that describes the ethernet error statistics measured on a
given module/port.
Indexes
Column Syntax OID
atiStkSwEthPortErrRxBadFrames
The total number of bad frames received on this port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.4.1.1
atiStkSwEthPortErrCollisions
The number of times a collision was detected on this port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.207.8.17.5.4.1.2

atiStkSwQoSGroupCoSToQueueTable

table
.1.3.6.1.4.1.207.8.17.7.3 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwQoSGroupCoSToQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwQoSGroupCoSToQueueTable' 
This table object allows to configure queue for each CoS (Class fo 
Service) priority.
          
This table object is not applicable to 8300 series products.
atiStkSwQoSGroupCoSToQueueEntry row .1.3.6.1.4.1.207.8.17.7.3.1
This object specifies an entry in 'atiStkSwQoSGroupCoSToQueueTable'
that describes the mapping of CoS priorities to corresponding Cos
Queues.
Indexes
Column Syntax OID
atiStkSwQoSGroupCoSPriority
This object specifies the CoS priority.
Enumeration
Enumerated Values:
1cos-priority-0
2cos-priority-1
3cos-priority-2
4cos-priority-3
5cos-priority-4
6cos-priority-5
7cos-priority-6
8cos-priority-7
 .1.3.6.1.4.1.207.8.17.7.3.1.1
atiStkSwQoSGroupCoSQueue
This object specifies the queue for each CoS priority. Please
note that the 94xx supports 8 levels, however, the 85xx
supports 4 levels.
Enumerationr/w
Enumerated Values:
1egress-queue-0
2egress-queue-1
3egress-queue-2
4egress-queue-3
5egress-queue-4
6egress-queue-5
7egress-queue-6
8egress-queue-7
 .1.3.6.1.4.1.207.8.17.7.3.1.2

atiStkSwQoSGroupQueueToWeightTable

table
.1.3.6.1.4.1.207.8.17.7.4 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwQoSGroupQueueToWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwQoSGroupQueueToWeightTable' 
This object allows to configure weight for each 
CoS (Class fo Service) queue .
          
This object table is not applicable to 8300 series products.
atiStkSwQoSGroupQueueToWeightEntry row .1.3.6.1.4.1.207.8.17.7.4.1
This object specifies an entry in 'atiStkSwQoSGroupQueueToWeightTable'
that describes the mapping of CoS queues to corresponding weights.
Indexes
Column Syntax OID
atiStkSwQoSGroupQueue
This object specifies the queue. Please note that the 94xx
supports 8 levels, however, the 85xx supports 4 levels.
Enumeration
Enumerated Values:
1egress-queue-0
2egress-queue-1
3egress-queue-2
4egress-queue-3
5egress-queue-4
6egress-queue-5
7egress-queue-6
8egress-queue-7
 .1.3.6.1.4.1.207.8.17.7.4.1.1
atiStkSwQoSGroupQueueWeight
This object specifies the queue weight for each queue.
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.207.8.17.7.4.1.2

atiStkSwQosFlowGrpTable

table
.1.3.6.1.4.1.207.8.17.7.5 · 1 row entry · 11 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwQosFlowGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwQosFlowGrpTable' 
This table contains a list of modules present in the switch
stack and their associated hardware information.
atiStkSwQosFlowGrpEntry row .1.3.6.1.4.1.207.8.17.7.5.1
This object specifies an entry in 'atiStkSwQosFlowGrpTable'
that describes the hardware informaton for a module present in
the switch stack.
Indexes
Column Syntax OID
atiStkSwQosFlowGrpModuleId
An index that corresponds to which module the data is retrieved
with stacking capability.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.7.5.1.1
atiStkSwQosFlowGrpId
An index that corresponds to specific Flow Group base on Id within
Flow Group list.
Integer32
Constraints:
range: 0-1023
 .1.3.6.1.4.1.207.8.17.7.5.1.2
atiStkSwQosFlowGrpDescription
The description of a specific Flow Group.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.207.8.17.7.5.1.3
atiStkSwQosFlowGrpDSCPValue
 OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.207.8.17.7.5.1.4
atiStkSwQosFlowGrpPriority
 OctetStringr/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.207.8.17.7.5.1.5
atiStkSwQosFlowGrpRemarkPriority
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.5.1.6
atiStkSwQosFlowGrpTos
 OctetStringr/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.207.8.17.7.5.1.7
atiStkSwQosFlowGrpTosToPriority
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.5.1.8
atiStkSwQosFlowGrpPriorityToTos
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.5.1.9
atiStkSwQosFlowGrpClassifierList
 SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.7.5.1.10
atiStkSwQosFlowGrpRowStatus
 SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.7.5.1.11

atiStkSwQosTrafficClassTable

table
.1.3.6.1.4.1.207.8.17.7.6 · 1 row entry · 15 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwQosTrafficClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwQosTrafficClassTable' 
This table contains a list of modules present in the switch
stack and their associated hardware information.
atiStkSwQosTrafficClassEntry row .1.3.6.1.4.1.207.8.17.7.6.1
This object specifies an entry in 'atiStkSwQosTrafficClassTable'
that describes the hardware informaton for a module present in
the switch stack.
Indexes
Column Syntax OID
atiStkSwQosTrafficClassModuleId
 Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.7.6.1.1
atiStkSwQosTrafficClassId
 Integer32
Constraints:
range: 0-511
 .1.3.6.1.4.1.207.8.17.7.6.1.2
atiStkSwQosTrafficClassDescription
 OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.207.8.17.7.6.1.3
atiStkSwQosTrafficClassExceedAction
 Enumerationr/w
Enumerated Values:
1drop
2remark
 .1.3.6.1.4.1.207.8.17.7.6.1.4
atiStkSwQosTrafficClassExceedRemarkValue
 Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.207.8.17.7.6.1.5
atiStkSwQosTrafficClassDSCPValue
 OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.207.8.17.7.6.1.6
atiStkSwQosTrafficClassMaxBandwidth
 OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.207.8.17.7.6.1.7
atiStkSwQosTrafficClassBurstSize
 OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.207.8.17.7.6.1.8
atiStkSwQosTrafficClassPriority
 OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.207.8.17.7.6.1.9
atiStkSwQosTrafficClassRemarkPriority
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.6.1.10
atiStkSwQosTrafficClassToS
 OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.207.8.17.7.6.1.11
atiStkSwQosTrafficClassMoveToSToPriority
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.6.1.12
atiStkSwQosTrafficClassMovePriorityToToS
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.6.1.13
atiStkSwQosTrafficClassFlowGroupList
 SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.7.6.1.14
atiStkSwQosTrafficClassRowStatus
 SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.7.6.1.15

atiStkSwQosPolicyTable

table
.1.3.6.1.4.1.207.8.17.7.7 · 1 row entry · 14 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwQosPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwQosPolicyTable' 
This table contains a list of modules present in the switch
stack and their associated hardware information.
atiStkSwQosPolicyEntry row .1.3.6.1.4.1.207.8.17.7.7.1
This object specifies an entry in 'atiStkSwQosPolicyTable'
that describes the hardware informaton for a module present in
the switch stack.
Indexes
Column Syntax OID
atiStkSwQosPolicyModuleId
 Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.7.7.1.1
atiStkSwQosPolicyId
 Integer32
Constraints:
range: 0-511
 .1.3.6.1.4.1.207.8.17.7.7.1.2
atiStkSwQosPolicyDescription
 OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.207.8.17.7.7.1.3
atiStkSwQosPolicyRemarkDSCP
 Enumerationr/w
Enumerated Values:
1all
2none
 .1.3.6.1.4.1.207.8.17.7.7.1.4
atiStkSwQosPolicyDSCPValue
 OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.207.8.17.7.7.1.5
atiStkSwQosPolicyToS
 OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.207.8.17.7.7.1.6
atiStkSwQosPolicyMoveToSToPriority
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.7.1.7
atiStkSwQosPolicyMovePriorityToToS
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.7.1.8
atiStkSwQosPolicySendToMirrorPort
 Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.7.1.9
atiStkSwQosPolicyTrafficClassList
 SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.7.7.1.10
atiStkSwQosPolicyRedirectPort
 SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.7.7.1.11
atiStkSwQosPolicyIngressPortList
 SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.7.7.1.12
atiStkSwQosPolicyEgressPortList
 SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.7.7.1.13
atiStkSwQosPolicyRowStatus
 SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.7.7.1.14

atiStkSwQoSGroupPortCoSPriorityTable

table
.1.3.6.1.4.1.207.8.17.7.8 · 1 row entry · 4 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwQoSGroupPortCoSPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwQoSGroupPortCoSPriorityTable' 
This table object allows to configure port priority for each CoS 
(Class of Service) priority. This table object is not applicable to 
8300 series products.
atiStkSwQoSGroupPortCoSPriorityEntry row .1.3.6.1.4.1.207.8.17.7.8.1
This object specifies an entry in
'atiStkSwQoSGroupPortCoSPriorityTable' it defines the CoS priority for
each port, and the priority defined for a port should override priority
already in the priority tagged packet re…
Indexes
Column Syntax OID
atiStkSwQoSGroupPortCoSPriorityModuleId
This object specifies the Module Id of the table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.7.8.1.1
atiStkSwQoSGroupPortCoSPriorityPortId
This object specifies the IfIndex of the table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.7.8.1.2
atiStkSwQoSGroupPortCoSPriorityPriority
This object specifies the priority for each port CoS priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.207.8.17.7.8.1.3
atiStkSwQoSGroupPortCoSPriorityOverridePriority
This object specifies the override priority for each port CoS
priority.
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.207.8.17.7.8.1.4

atiStkSwStaticTrunkTable

table
.1.3.6.1.4.1.207.8.17.8.1 · 1 row entry · 8 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwStaticTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwStaticTrunkTable' 
This table contains a list of static trunk configuration present 
in the switch stack.
atiStkSwStaticTrunkEntry row .1.3.6.1.4.1.207.8.17.8.1.1
This object specifies an entry in 'atiStkSwStaticTrunkTable'
that describes the static trunk informaton for a module present in
the switch stack.
Indexes
Column Syntax OID
atiStkSwStaticTrunkModuleId
An identifier for switch stack.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.8.1.1.1
atiStkSwStaticTrunkIndex
An index for a trunk entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.8.1.1.2
atiStkSwStaticTrunkId
An identifier for a trunk.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.17.8.1.1.3
atiStkSwStaticTrunkName
Name of a trunk, once the entry has created, it cannot be changed.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.207.8.17.8.1.1.4
atiStkSwStaticTrunkMethod
Trunk distribution mode.
Enumerationr/w
Enumerated Values:
1srcIp
2dstIp
3src-dstIp
4srcMac
5dstMac
6src-dstMac
 .1.3.6.1.4.1.207.8.17.8.1.1.5
atiStkSwStaticTrunkPortList
A list of ports that used as a trunk port.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.8.1.1.6
atiStkSwStaticTrunkStatus
The status of the trunk, either up or down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.207.8.17.8.1.1.7
atiStkSwStaticTrunkRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.8.1.1.8

atiStkSwACLConfigTable

table
.1.3.6.1.4.1.207.8.17.9.1 · 1 row entry · 7 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atiStkSwACLConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AtiStackSwitch9424-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AtiStackSwitch9424-MIB::atiStkSwACLConfigTable' 
This table contains a Access Control List (ACL) in the
switch and their associated attributes.
atiStkSwACLConfigEntry row .1.3.6.1.4.1.207.8.17.9.1.1
This object specifies an entry in 'atiStkSwACLConfigTable'
that describes the ACL in the switch.
Indexes
Column Syntax OID
atiStkSwACLModuleId
This object specifies the ID of a module present in the switch
stack.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.207.8.17.9.1.1.1
atiStkSwACLId
This object specifies the ID of the ACL table.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.207.8.17.9.1.1.2
atiStkSwACLDescription
The description of the ACL entry.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.207.8.17.9.1.1.3
atiStkSwACLAction
The action of the ACL entry either deny or permit.
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.207.8.17.9.1.1.4
atiStkSwACLClassifierList
The classifier list of the entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.9.1.1.5
atiStkSwACLPortList
The port list of the ACL entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.207.8.17.9.1.1.6
atiStkSwACLRowStatus
The row status of the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.207.8.17.9.1.1.7