AcAtm Table View

This table indicates general information about and alarm status of the ATM optical fiber ports.  It is also used to configure the ATM address associated with the optical port and read that address.

atmPortEntry row .1.3.6.1.4.1.5003.9.10.6.1.2.1.1

Indexes

atmPortNumber

Column	Syntax	OID
atmPortAdministrativeState This is the ATM Port Administrative State	Enumerationr/w Enumerated Values: 0 locked 1 shuttingDown 2 unlocked	.1.3.6.1.4.1.5003.9.10.6.1.2.1.1.1
atmPortOperationalState This is the Port Operational State	Enumeration Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.5003.9.10.6.1.2.1.1.2
atmPortNumber This is the ATM Port Number	Enumeration Enumerated Values: 0 port0 1 port1 2 port2	.1.3.6.1.4.1.5003.9.10.6.1.2.1.1.3
atmPortAdminAddress This is the Administrative?ATM Port Address (20 octets in length - 40 hexadecimal characters). This address is manually configured.?This address is used when ILMI is not available.	ATM-TC-MIBAtmAddrr/w Constraints: range: 0-40	.1.3.6.1.4.1.5003.9.10.6.1.2.1.1.4
atmPortOperationalAddress This is the port ATM address currently in operation (i.e.:assigned to this port). This address?is set to atmPortAdminAddress if no ILMI address is registered. If an ILMI address is successfully registered, then atmPortO…	ATM-TC-MIBAtmAddr Constraints: range: 0-40	.1.3.6.1.4.1.5003.9.10.6.1.2.1.1.5
atmPortAlarmStatus This is the ATM Port Alarm Status. The possible values are: cleared(0) - LOS, AIS and RDI conditions are not present los(1) - the LOS condition is present ais(2) - AIS condition is present (LOS condition is …	Enumeration Enumerated Values: 0 cleared 1 los 2 ais 4 rdi	.1.3.6.1.4.1.5003.9.10.6.1.2.1.1.6
atmPortAddressMode The mode reflects the type of address in operation. addrModeNone(0) : No administrative address has been configured and no ILMI address has been registered. Thus no address is available to assign to the port. addrModeMa…	Enumeration Enumerated Values: 0 addrModeNone 1 addrModeManual 2 addrModeILMI	.1.3.6.1.4.1.5003.9.10.6.1.2.1.1.7

This includes the destination remote Gateways (and RNC) that the Media Gateway would have signaling contact with.

atmRemoteGatewayEntry row .1.3.6.1.4.1.5003.9.10.6.1.3.1.1

Indexes

atmRemoteGatewayIndex

Column	Syntax	OID
atmRemoteGatewayRowStatus The RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5003.9.10.6.1.3.1.1.1
atmRemoteGatewayAction Development Pending -for future use	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.5003.9.10.6.1.3.1.1.2
atmRemoteGatewayActionResult Development Pending -future use	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.5003.9.10.6.1.3.1.1.3
atmRemoteGatewayIndex .	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.5003.9.10.6.1.3.1.1.4
atmRemoteGatewayName Remote Gateway name	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.5003.9.10.6.1.3.1.1.5
atmRemoteGatewayNSAPAddress This is the ATM Address associated with the remote Gateway to which this PVC connects (20 octets in length - 40 hexadecimal characters)	ATM-TC-MIBAtmAddrr/w Constraints: range: 0-40	.1.3.6.1.4.1.5003.9.10.6.1.3.1.1.6
atmRemoteGatewayALCAPInstanceNum ALCAP Instance number associated with the remote Gateway ( 3G only)	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.5003.9.10.6.1.3.1.1.7

This table contains information referring to Permanent Virtual Channels connecting the AMS to the ATM Edge Switch.

aal2PVCEntry row .1.3.6.1.4.1.5003.9.10.6.1.4.1.1

Indexes

aal2PVCRemoteGatewayIndex aal2PVCVCCIPATHID

Column	Syntax	OID
aal2PVCRowStatus The RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.1
aal2PVCAction Development Pending - for future use	Enumeration Enumerated Values: 0 none	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.2
aal2PVCActionResult Development Pending - for future use	Enumeration Enumerated Values: 0 none	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.3
aal2PVCRemoteGatewayIndex This is the gw index that associated with the remote Gateway table to which this PVC connects (20 octets in length - 40 hexadecimal characters)	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.4
aal2PVCVCCIPATHID This is the range of Virtual Connection Channel Identifiers which is an end to end identifier for an AAL2 VC.	Integer32r/w Constraints: range: 1-8191	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.5
aal2PVCPortNumber This is the port number associated with the PVC	Enumerationr/w Enumerated Values: 0 port0 1 port1 2 port2	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.6
aal2PVCVpi This is the VPI assigned to the PVC	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.7
aal2PVCVci This is the VCI assigned to the PVC	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.8
aal2PVCMaxNumOfCid This is the maximum number of CIDs for the AAL2 PVC.	Integer32r/w Constraints: range: 1-248	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.9
aal2PVCNumOfCidInUse This is the number of CIDs for AAL2 PVC currently in use.	Integer32 Constraints: range: 1-248	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.10
aal2PVCServiceCategory This is the Service Category which is either CBR (Constant Bit Rate) or rtVBR (realtime Variable Bit Rate)	Enumerationr/w Enumerated Values: 1 cbr 2 rtVbr	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.11
aal2PVCPCR This is the peak cell rate (PCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVC	Integer32r/w Constraints: range: 0-49600	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.12
aal2PVCSCR This is the sustained cell rate (SCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVC.	Integer32r/w Constraints: range: 0-49600	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.13
aal2PVCMBS This is the Maximum Burst Size (MBS) for the provisioned virtual channel (PVC).	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.5003.9.10.6.1.4.1.1.14

This table gives the Loopback Configuration associated with a given Optical Fiber Port number.

atmPortLoopbackConfigEntry row .1.3.6.1.4.1.5003.9.10.6.1.5.1.1

Indexes

atmPortLoopbackConfigPortNumber

Column	Syntax	OID
atmPortLoopbackConfigIsUsed This tells whether or not the port loopback is used. If the port is available on the board, this is yes.	Enumerationr/w Enumerated Values: 0 no 1 yes	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.1
atmPortLoopbackConfigAction Development Pending - for future use	Enumeration Enumerated Values: 0 none	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.2
atmPortLoopbackConfigActionResult Development Pending - for future use	Enumeration Enumerated Values: 0 none	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.3
atmPortLoopbackConfigPortNumber The port number associated with the optical port which is being described.	Enumerationr/w Enumerated Values: 0 port0 1 port1 2 port2	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.4
atmPortLoopbackConfigMode This is the mode in which the loopback will work: no loopback, UNI loopback, or Virtual Path loopback	Enumerationr/w Enumerated Values: 0 none 1 uni 2 vp	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.5
atmPortLoopbackConfigOutBoundVirtualPath If the atmLoopback mode is VP, this specifies the VP identity for the cells going toward the ATM edge switch	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.6
atmPortLoopbackConfigInBoundVirtualPath If the atmLoopback mode is VP, this specifies the VP identity for the cells coming from the ATM edge switch	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.7
atmPortLoopbackConfigVciRangeFirst If the atmLoopback mode is VP, this specifies the minimum VCI within the inbound and outbound VP which may be used.	Integer32r/w Constraints: range: 33-2047	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.8
atmPortLoopbackConfigVciRangeLast If the atmLoopback mode is VP, this specifies the maximum VCI within the inbound and outbound VP which may be used.	Integer32r/w Constraints: range: 33-2047	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.9
atmPortLoopbackConfigServiceCategory This category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release.	Enumerationr/w Enumerated Values: 1 cbr 2 rtVbr	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.10
atmPortLoopbackConfigPCR This is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is o…	Integer32r/w Constraints: range: 171-59600	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.11
atmPortLoopbackConfigSCR This is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For …	Integer32r/w Constraints: range: 171-59600	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.12
atmPortLoopbackConfigMBS This is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.5003.9.10.6.1.5.1.1.13

This table indicates information about profiles associated with the creation of each new AAL2 SVC.

atmSvcProfileEntry row .1.3.6.1.4.1.5003.9.10.6.1.6.1.1

Indexes

atmSvcProfileIndex

Column	Syntax	OID
atmSvcProfileIsUsed This tells whether or not this SVC profile is used. If it is used, the value is yes.	Enumerationr/w Enumerated Values: 0 no 1 yes	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.1
atmSvcProfileIndex Initially only one SVC Profile is supported. This parameter may be updated later as the table supports more profiles	Integer32r/w Constraints: range: 1-550	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.2
atmSvcProfileMaxNumOfCids The CIDs fall in the range of 8 to 255, so there are a maximum of 248 CIDs possible. The assignment of CID #8 may be received but not initiated. Assignments from the low end of the CID range should start with 9 as ther…	Integer32r/w Constraints: range: 1-248	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.3
atmSvcProfilePCR This is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is o…	Integer32r/w Constraints: range: 171-59600	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.4
atmSvcProfileSCR This is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For …	Integer32r/w Constraints: range: 171-59600	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.5
atmSvcProfileMBS This is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.6
atmSvcProfilePersistence This is the parameter which descirbes how long an AAL2 SVC will persist even when no CIDs are in use. Generally, this is on the order of 180 to 600 seconds. Non-persistent SVCs should have a value of 0.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.7
atmSvcProfileServiceCategory This category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release.	Enumerationr/w Enumerated Values: 1 cbr 2 rtVbr	.1.3.6.1.4.1.5003.9.10.6.1.6.1.1.8

This is the table which describes the read only characteristics of a given AAL1 or AAL2 SVC.

atmSvcConnectionEntry row .1.3.6.1.4.1.5003.9.10.6.2.1.1.1

Indexes

atmSvcConnectionIndex

Column	Syntax	OID
atmSvcConnectionIndex A unique index, that identifies the SVC on the system.	Integer32 Constraints: range: 0-500	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.1
atmSvcConnectionRemoteGatewayAddress This is the ATM Address associated with the remote Gateway to which this SVC connects (20 octets in length - 40 hexadecimal characters)	ATM-TC-MIBAtmAddr Constraints: range: 0-40	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.2
atmSvcConnectionPort This is the port on which the SVC is connected	Enumeration Enumerated Values: 0 port0 1 port1 2 port2	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.3
atmSvcConnectionVpi This is the VPI associated with the SVC	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.4
atmSvcConnectionVci This is the VCI associated with the SVC	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.5
atmSvcConnectionAALType This is the Adaptation Layer type. It is either AAL1 or AAL2.	Enumeration Enumerated Values: 1 aal1 2 aal2	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.6
atmSvcConnectionDirection This is the direction in which the SVC was setup. Incoming means the this end received the SETUP. Outgoing means this end sent the SETUP.	Enumeration Enumerated Values: 0 incoming 1 outgoing	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.7
atmSvcConnectionEecid This is the unique end to end identifier associated with the setup of AAL1 SVCs	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.8
atmSvcConnectionVcci This is the unique identity of an SVC associated with an AAL2 connection	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.9
atmSvcConnectionMaxNumOfCid This is the maximum number of CIDs for an AAL2 SVC.	Integer32 Constraints: range: 1-248	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.10
atmSvcConnectionNumOfCidInUse This is the number of channel Ids currently in use in a given SVC.	Integer32 Constraints: range: 1-248	.1.3.6.1.4.1.5003.9.10.6.2.1.1.1.11