AX-BGP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
44
.1.3.6.1.4.1.22610.2.5.4 · 1 row entry · 27 columns
Uses the a10 variant from /opt/observium/mibs/a10.
Command help
Walk axBgpPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AX-BGP-MIB' -M '/opt/observium/mibs/a10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AX-BGP-MIB::axBgpPeerTable'
BGP peer table.  This table contains,
one entry per BGP peer, information about the
connections with BGP peers.
axBgpPeerEntry row .1.3.6.1.4.1.22610.2.5.4.1
Entry containing information about the
connection with a BGP peer.
Column Syntax OID
The type of the BGP peer address
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.22610.2.5.4.1.1
The BGP Identifier of this entry's BGP peer.
This entry MUST be 0.0.0.0 unless the
axBgpPeerState is in the openconfirm or the
established state.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.22610.2.5.4.1.2
The BGP peer connection state.
Enumeration
Enumerated Values:
1idle
2connect
3active
4opensent
5openconfirm
6established
.1.3.6.1.4.1.22610.2.5.4.1.3
The desired state of the BGP connection.
A transition from 'stop' to 'start' will cause
the BGP Manual Start Event to be generated.
A transition from 'start' to 'stop' will cause
the BGP Manual Stop Event to be generate…
Enumeration
Enumerated Values:
1stop
2start
.1.3.6.1.4.1.22610.2.5.4.1.4
The negotiated version of BGP running between
the two peers.

This entry MUST be zero (0) unless the
axBgpPeerState is in the openconfirm or the
established state.

Note that legal values for…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.22610.2.5.4.1.5
The local IP address of this entry's BGP
connection.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.22610.2.5.4.1.6
The local port for the TCP connection between
the BGP peers.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.22610.2.5.4.1.7
The remote IP address of this entry's BGP
peer.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.22610.2.5.4.1.8
The remote port for the TCP connection
between the BGP peers. Note that the
objects axBgpPeerLocalAddr,
axBgpPeerLocalPort, axBgpPeerRemoteAddr, and
axBgpPeerRemotePort provide the appropriate
reference to the standard…
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.22610.2.5.4.1.9
The remote autonomous system number received in
the BGP OPEN message.
INET-ADDRESS-MIBInetAutonomousSystemNumber .1.3.6.1.4.1.22610.2.5.4.1.10
The number of BGP UPDATE messages
received on this connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.11
The number of BGP UPDATE messages
transmitted on this connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.12
The total number of messages received
from the remote peer on this connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.13
The total number of messages transmitted to
the remote peer on this connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.14
The last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
contains the error code, and the second byte
OctetString
Constraints:
range: 2-2
.1.3.6.1.4.1.22610.2.5.4.1.15
The total number of times the BGP FSM
transitioned into the established state
for this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.16
This timer indicates how long (in
seconds) this peer has been in the
established state or how long
since this peer was last in the
established state. It is set to zero when
a new peer is configured or when the router i…
secondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.17
Time interval (in seconds) for the
ConnectRetry timer. The suggested value
for this timer is 120 seconds.
secondsInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.22610.2.5.4.1.18
Time interval (in seconds) for the Hold
Timer established with the peer. The
value of this object is calculated by this
BGP speaker, using the smaller of the
values in axBgpPeerHoldTimeConfigured and the
Hold Time rece…
secondsInteger32
Constraints:
range: 3-65535
range: 0-0
.1.3.6.1.4.1.22610.2.5.4.1.19
Time interval (in seconds) for the KeepAlive
timer established with the peer. The value
of this object is calculated by this BGP
speaker such that, when compared with
axBgpPeerHoldTime, it has the same proportion
that …
secondsInteger32
Constraints:
range: 0-21845
.1.3.6.1.4.1.22610.2.5.4.1.20
Time interval (in seconds) for the Hold Time
configured for this BGP speaker with this
peer. This value is placed in an OPEN
message sent to this peer by this BGP
speaker, and is compared with the Hold
Time field in an…
secondsInteger32
Constraints:
range: 3-65535
range: 0-0
.1.3.6.1.4.1.22610.2.5.4.1.21
Time interval (in seconds) for the
KeepAlive timer configured for this BGP
speaker with this peer. The value of this
object will only determine the
KEEPALIVE messages' frequency relative to
the value specified in
axBgp…
secondsInteger32
Constraints:
range: 0-21845
.1.3.6.1.4.1.22610.2.5.4.1.22
Time interval (in seconds) for the
MinASOriginationInterval timer.
The suggested value for this timer is 15
seconds.
secondsInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.22610.2.5.4.1.23
Time interval (in seconds) for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30
seconds for EBGP connections and 5
seconds for IBGP connections.
secondsInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.22610.2.5.4.1.24
Elapsed time (in seconds) since the last BGP
UPDATE message was received from the peer.
Each time axBgpPeerInUpdates is incremented,
the value of this object is set to zero (0).
secondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.25
Maximum number of prefix accept from this peer
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.22610.2.5.4.1.26
Max-Prefix Threshold-value (1-100)%. Once an accepted
prefixes exceed the threshold limit a warning message is
generatead and the SNMP notification is sent
percentInteger32
Constraints:
range: 1-100
.1.3.6.1.4.1.22610.2.5.4.1.27
.1.3.6.1.4.1.22610.2.5.5 · 1 row entry · 17 columns
Uses the a10 variant from /opt/observium/mibs/a10.
Command help
Walk axBgpPathAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AX-BGP-MIB' -M '/opt/observium/mibs/a10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AX-BGP-MIB::axBgpPathAttrTable'
The BGP Received Path Attribute Table
contains information about paths to
destination networks, received from all
BGP peers.
axBgpPathAttrEntry row .1.3.6.1.4.1.22610.2.5.5.1
Information about a path to a network.
Column Syntax OID
The address family of the prfix specified
in axBgpPathAttrIpAddrPrefix
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.22610.2.5.5.1.1
The type of the address of the peer where the path
information was learned.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.22610.2.5.5.1.2
The IP address of the peer where the path
information was learned.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.22610.2.5.5.1.3
Length in bits of the IP address prefix in
the Network Layer Reachability
Information field.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.22610.2.5.5.1.4
An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
axBgpPathAttrIpAddrPrefixLen.
Any bits beyond the length specified b…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.22610.2.5.5.1.5
The ultimate origin of the path
information.
Enumeration
Enumerated Values:
1igp
2egp
3incomplete
.1.3.6.1.4.1.22610.2.5.5.1.6
The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.

The type is a 1-octet field that has two
possible values:
1 AS_SET: unordered set of ASes…
OctetString
Constraints:
range: 2-255
.1.3.6.1.4.1.22610.2.5.5.1.7
The address family of the address of the border
router that should be used for the destination network.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.22610.2.5.5.1.8
The address of the border router that
should be used for the destination
network. This address is the NEXT_HOP
address received in the UPDATE packet.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.22610.2.5.5.1.9
This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system. A value of -1
indicates the absence of this attribute.
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.22610.2.5.5.1.10
The originating BGP speaker's degree of
preference for an advertised route. A
value of -1 indicates the absence of this
attribute.
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.22610.2.5.5.1.11
If the ATOMIC_AGGREGATE attribute is present
in the Path Attributes then this object MUST
have a value of 'lessSpecificRouteNotSelected'.

If the ATOMIC_AGGREGATE attribute is missing
in the Path Attribute…
Enumeration
Enumerated Values:
1lessSpecificRouteNotSelected
2lessSpecificRouteSelected
.1.3.6.1.4.1.22610.2.5.5.1.12
The AS number of the last BGP speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.

Note that propagation of AS of zero is illegal
in the Internet.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.22610.2.5.5.1.13
The IP address of the last BGP speaker
that performed route aggregation. A
value of 0.0.0.0 indicates the absence
of this attribute.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.22610.2.5.5.1.14
The degree of preference calculated by the
receiving BGP speaker for an advertised
route. A value of -1 indicates the
absence of this attribute.
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.22610.2.5.5.1.15
An indication of whether this route
was chosen as the best BGP route for this
destination.
Enumeration
Enumerated Values:
1false
2true
.1.3.6.1.4.1.22610.2.5.5.1.16
One or more path attributes not understood by
this BGP speaker.

Path attributes are recorded in the Update Path
attribute format of type, length, value.

Size zero (0) indicates the absence …
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.22610.2.5.5.1.17