AVAYA-WLAN-MOB-SW-NOTIFICATIONS-MIB
AVAYA WLAN Mobility Switch Notifications MIB
Copyright 2011 Avaya, Inc.
All rights reserved.
This Avaya SNMP Management Information Base Specification
(Specification) embodies Avaya's confidential and proprietary
intellectual property. Avaya retains all title and ownership
in the Specification, including any revisions.
This Specification is supplied 'AS IS,' and Avaya makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification.
- Source file
AVAYA-WLAN-MOB-SW-NOTIFICATIONS-MIB- Last revised
- Identity
avayaWlanMobSwitchNotificationsMib- Base OID
1.3.6.1.4.1.45.7.19
Imported Objects
| AVAYA-WLAN-TC-MIB | AvWlanMobVlanRole AvWlanMobVlanState AvWlanSwitchNotifAuxLimitsMap |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION (no object page) |
| SYNOPTICS-ROOT-MIB | avayaWlanMibs |
Net-SNMP examples using the nortel MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'AVAYA-WLAN-MOB-SW-NOTIFICATIONS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'AVAYA-WLAN-MOB-SW-NOTIFICATIONS-MIB::avayaWlanMobSwitchNotificationsMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AVAYA-WLAN-MOB-SW-NOTIFICATIONS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AVAYA-WLAN-MOB-SW-NOTIFICATIONS-MIB::avayaWlanMobSwitchNotificationsMib'
Objects (32)
Showing 32 of 32 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.45.7.19 |
||
.1.3.6.1.4.1.45.7.19.0 |
||
.1.3.6.1.4.1.45.7.19.0.1 |
||
.1.3.6.1.4.1.45.7.19.1 |
||
.1.3.6.1.4.1.45.7.19.1.1 |
||
.1.3.6.1.4.1.45.7.19.1.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.45.7.19.1.1.10 |
|
.1.3.6.1.4.1.45.7.19.1.1.11 |
||
.1.3.6.1.4.1.45.7.19.1.1.12 |
||
.1.3.6.1.4.1.45.7.19.1.1.13 |
||
.1.3.6.1.4.1.45.7.19.1.1.14 |
||
.1.3.6.1.4.1.45.7.19.1.1.15 |
||
.1.3.6.1.4.1.45.7.19.1.1.16 |
||
.1.3.6.1.4.1.45.7.19.1.1.17 |
||
|
Enumeration
|
.1.3.6.1.4.1.45.7.19.1.1.18 |
|
.1.3.6.1.4.1.45.7.19.1.1.19 |
||
.1.3.6.1.4.1.45.7.19.1.1.2 |
||
.1.3.6.1.4.1.45.7.19.1.1.20 |
||
|
Enumeration
|
.1.3.6.1.4.1.45.7.19.1.1.21 |
|
.1.3.6.1.4.1.45.7.19.1.1.22 |
||
|
Enumeration
|
.1.3.6.1.4.1.45.7.19.1.1.23 |
|
|
Enumeration
|
.1.3.6.1.4.1.45.7.19.1.1.24 |
|
.1.3.6.1.4.1.45.7.19.1.1.25 |
||
.1.3.6.1.4.1.45.7.19.1.1.26 |
||
.1.3.6.1.4.1.45.7.19.1.1.27 |
||
.1.3.6.1.4.1.45.7.19.1.1.3 |
||
.1.3.6.1.4.1.45.7.19.1.1.4 |
||
.1.3.6.1.4.1.45.7.19.1.1.5 |
||
.1.3.6.1.4.1.45.7.19.1.1.6 |
||
.1.3.6.1.4.1.45.7.19.1.1.7 |
||
|
Enumeration
|
.1.3.6.1.4.1.45.7.19.1.1.8 |
|
|
Enumeration
|
.1.3.6.1.4.1.45.7.19.1.1.9 |
Dependencies (7) 6 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- SYNOPTICS-ROOT-MIBnortel
- AVAYA-WLAN-TC-MIBnortel
- INET-ADDRESS-MIBrfc
- AVAYA-WLAN-MOB-SW-NOTIFICATIONS-MIBnortelselected
Notifications / Traps (17)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.45.7.19.0.1.1 |
A avWlanSwitchMCPConnectionEstablished trap signifies that the SNMP entity,
acting in an agent role, MCP client successfully established connection with the MCP server in Wireless Controller. The Trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.10 |
A avWlanSwitchVlanRoleChanged trap signifies that the SNMP entity,
acting in an agent role, has changed the role of the mobility vlan. Mobility vlan name, old and new role, reason for the role change is passed as parameter. The trap is Disabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.11 |
A avWlanSwitchVlanMapStateChanged trap signifies that the SNMP entity,
acting in an agent role, has changed the state of the mobility vlan map. A vlan map is the association between mobility vlan name and the local static vlan. The state is Active as long as Mobility vlan name and the local static vlan are active. Deletion of mobility vlan or the local static vlan results in a InActive state for a vlan map. Vlan map will become Active if the mobility vlan is created before the next MVT download. Mobility vlan name, old, new state and the reason is passed as parameter. The trap is Disabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.12 |
A avWlanSwitchVlanMapRemoved trap signifies that the SNMP entity,
acting in an agent role, has deleted the mobility vlan map. InActive maps are deleted when the mobility vlan is not present in the MVT download. Active maps are deleted either from the config or when the lvid to which mobility vlan is mapped is deleted. Mobility vlan name, vlan state and reason for removal is passed as parameter. The trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.13 |
A avWlanSwitchVlanTrackAffected trap signifies that the SNMP entity,
acting in an agent role, has detected a mobility vlan in server role has no ports active in its track list. Mobility vlan name is passed as parameter. The trap is Disabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.14 |
A avWlanSwitchIgmpSnoopingEnabled trap signifies that the SNMP entity,
acting in an agent role, has successfully enabled IGMP snooping on a mobility vlan. local vlan identifier which is mapped to mobility vlan is passed as parameter. The trap is Disabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.15 |
A avWlanSwitchIgmpSnoopingDisabled trap signifies that the SNMP entity,
acting in an agent role, has successfully disabled IGMP snooping on a mobility vlan. Mobility vlan name is passed as parameter. The trap is Disabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.16 |
A avWlanSwitchIgmpControlFrameReceived trap signifies that the SNMP entity,
acting in an agent role, has snooped IGMP control frame on a mobility vlan. Mobility vlan name, Frame Type, device type and IGMP source IP are passed as parameters. The trap is Disabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.17 |
This trap signifies that the SNMP entity, acting in an agent role,
has detected some switch limits being reached. The bit mask avWlanSwitchNotifAuxLimitsReached is send in the trap to indicate the parameter for which limits are reached. This trap is enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.2 |
A avWlanSwitchMCPLostConnection trap signifies that the SNMP entity,
acting in an agent role, MCP client lost connection with the MCP server in Wireless Controller. The Trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.3 |
A avWlanSwitchMVTDownload trap signifies that the SNMP entity,
acting in an agent role, has received Mobility Vlan Table download from the Mobility controller. Mobility Switch receives MVT when it registers with the Mobility Controller. Controller address and number of entries in the table is passed as parameter. The Trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.4 |
A avWlanSwitchMSTDownload trap signifies that the SNMP entity,
acting in an agent role, has received Mobility Switch Table download from the Mobility Controller. Mobility Switch receives MST when it registers with the Mobility controller. Controller address and number of entries in the table is passed as parameter. The Trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.5 |
A avWlanSwitchPeerDeviceConnectionEstablished trap signifies that the SNMP entity,
acting in an agent role, has established connection to the peer device. Peer switch IP, MAC address and device type is passed as parameter. The Trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.6 |
A avWlanSwitchPeerDeviceLostConnection trap signifies that the SNMP entity,
acting in an agent role, has lost connection to the peer device. Peer switch IP, MAC, device type and failure reason are passed as parameter. The Trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.7 |
A avWlanSwitchVlanServerElected trap signifies that the SNMP entity,
acting in an agent role, has elected vlan server for a mobility vlan. Mobility vlan name, vlan server IP and MAC address is passed as parameter. The Trap is Disabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.8 |
A avWlanSwitchLostConnectionToVlanServer trap signifies that the SNMP entity,
acting in an agent role, has lost connection to vlan server and there are no other alternative vlan servers for the mobility vlan. Mobility vlan name, vlan server IP and MAC address is passed as parameter. The trap is Enabled by default. |
|
.1.3.6.1.4.1.45.7.19.0.1.9 |
A avWlanSwitchVlanGenNumberMismatch trap signifies that the SNMP entity,
acting in an agent role, has detected change in the generation number. Mobility switches advertise the generation numbers for the mapped mobility vlans in the mobility domain. Generation numbers are used to detect stale mobility vlans. The mobility vlan name, mobility switch generation number and the peer switch generation number is passed as parameter. This is enabled by default. |