AVAYA-SURV-MIB Table View

Station Table

avSurvStationEntry row .1.3.6.1.4.1.6889.2.6.4.2.1

Each entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name

Indexes

avSurvStationIndex

Column	Syntax	OID
avSurvStationIndex Station Table Index	Integer32r/w Constraints: range: 1-340	.1.3.6.1.4.1.6889.2.6.4.2.1.1
avSurvStationExt Station Extension number	OctetStringr/w Constraints: range: 1-13	.1.3.6.1.4.1.6889.2.6.4.2.1.2
avSurvStationType Station model type	Enumerationr/w Enumerated Values: 1 ip4601 2 ip4602 3 ip4602Sw 4 ip4606 5 ip4610Sw 6 ip4612 7 ip4620 8 ip4620Sw 9 ip4624 10 analog2500 11 ip4621 12 ip4622 13 ip4625 20 dcp2402 21 dcp2410 22 dcp2420 30 dcp6402 31 dcp6402D 32 dcp6408 33 dcp6408plus 34 dcp6408D 35 dcp6408Dplus 36 dcp6416Dplus 37 dcp6424Dplus 40 dcp8403B 41 dcp8405B 42 dcp8405Bplus 43 dcp8405D 44 dcp8405Dplus 45 dcp8410B 46 dcp8410D 47 dcp8411B 48 dcp8411D 49 dcp8434D	.1.3.6.1.4.1.6889.2.6.4.2.1.3
avSurvStationInterfaceIndex Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type. Note: This element has been deprecated in SLS R4.1. For legacy stations, use avSurvSt…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.6889.2.6.4.2.1.4
avSurvStationCOR Station Class of Outgoing Restriction (COR) level	Enumerationr/w Enumerated Values: 1 emergency 2 internal 3 local 4 toll 5 unrestricted	.1.3.6.1.4.1.6889.2.6.4.2.1.5
avSurvStationTrunkDest Station trunk destination. Can be used to answer incomming trunk calls	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6889.2.6.4.2.1.6
avSurvStationRowStatus Create/Delete a row entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.2.1.7
avSurvStationExpansionModule Station set has an expansion module in place. This is only allowed for the digital phones (IP and DCP. IP phone models 4620, 4621, 4625 may use EU24 and EU24BL. DCP phone models 2420 may use EU24 and EU24BL. DCP p…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6889.2.6.4.2.1.8
avSurvStationSlotPort CM slot/port in the Vyxx format	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.6889.2.6.4.2.1.9
avSurvStationSwitchHookFlash Switchhook flash is allowed only for analog phones	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6889.2.6.4.2.1.10
avSurvStationIpAddressRegistered IP address of registered IP station. Note only for IP stations	OctetString Constraints: range: 1-4	.1.3.6.1.4.1.6889.2.6.4.2.1.11
avSurvStationName Station or user's Name	OctetStringr/w Constraints: range: 0-27	.1.3.6.1.4.1.6889.2.6.4.2.1.12

Trunk Group Table

avSurvTrunkGroupEntry row .1.3.6.1.4.1.6889.2.6.4.3.1

Each entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode

Indexes

avSurvTrunkGroupNum

Column	Syntax	OID
avSurvTrunkGroupNum Trunk Group Number	Integer32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.6889.2.6.4.3.1.1
avSurvTrunkGroupType Trunk Group Type	Enumerationr/w Enumerated Values: 1 analogLoopStart 2 analogDid 3 analogGroundStart 4 bri 5 t1InBandSignaling 6 t1IsdnSignaling 7 e1InBandSignaling 8 e1IsdnSignaling	.1.3.6.1.4.1.6889.2.6.4.3.1.2
avSurvTrunkGroupTAC Trunk Group Trunk Access Code (TAC)	OctetStringr/w Constraints: range: 1-4	.1.3.6.1.4.1.6889.2.6.4.3.1.3
avSurvTrunkGroupDial Trunk Group Outward Dial. Note MF not supported in SLS	Enumerationr/w Enumerated Values: 1 rotary 2 dtmf 3 mf	.1.3.6.1.4.1.6889.2.6.4.3.1.4
avSurvTrunkGroupRowStatus Create/Delete a row entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.3.1.5
avSurvTrunkGroupDidDigitTreatment Trunk Group DID digit treatment option. This applies for analog DID trunks and non-ISDN digital tie trunks. Note: blank means take no action.	Enumerationr/w Enumerated Values: 1 absorb1 2 absorb2 3 absorb3 4 absorb4 5 absorb5 11 insert1 12 insert2 13 insert3 14 insert4 99 blank	.1.3.6.1.4.1.6889.2.6.4.3.1.6
avSurvTrunkGroupDidDigitsInsert Digit string to be inserted for DID treatment This applies for analog DID trunks and non-ISDN digital tie trunks.	OctetStringr/w Constraints: range: 0-4	.1.3.6.1.4.1.6889.2.6.4.3.1.7
avSurvTrunkGroupDidSupervision Type of incoming supervision used on DID trunk. This applies only for analog DID trunks.	Enumerationr/w Enumerated Values: 1 immediate 2 wink	.1.3.6.1.4.1.6889.2.6.4.3.1.8
avSurvTrunkGroupName Customer's name for trunk group	OctetStringr/w Constraints: range: 0-27	.1.3.6.1.4.1.6889.2.6.4.3.1.9
avSurvTrunkGroupCodesetDisplay Which Q.931 codesets are allowed to send Display IE's to the user phones This applies only to ISDN BRI/PRI trunks.	Enumerationr/w Enumerated Values: 0 codeset0 6 codeset6 7 codeset7	.1.3.6.1.4.1.6889.2.6.4.3.1.10
avSurvTrunkGroupCodesetNational Which codesets are allowed to send National supported IE's. This applies only to ISDN BRI/PRI trunks.	Enumerationr/w Enumerated Values: 6 codeset6 7 codeset7	.1.3.6.1.4.1.6889.2.6.4.3.1.11
avSurvTrunkGroupChannelPreference Used for encoding Channel-ID IE. This applies only to ISDN BRI/PRI trunks.	Enumerationr/w Enumerated Values: 1 exclusive 2 preferred	.1.3.6.1.4.1.6889.2.6.4.3.1.12
avSurvTrunkGroupDigitHandling Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks.	Enumerationr/w Enumerated Values: 0 enblocEnbloc 1 enblocOverlap 2 overlapEnbloc 3 overlapOverlap	.1.3.6.1.4.1.6889.2.6.4.3.1.13
avSurvTrunkGroupJapanDisconnect Send a Q.931 CONNECT msg right before sending DISCONNECT msg. This applies only to ISDN BRI/PRI trunks in Japan.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.6889.2.6.4.3.1.14
avSurvTrunkGroupSendName Specifies whether Calling, Connected, Called party's name is to be shared with network. This applies only to ISDN BRI/PRI trunks. Default is no.	Enumerationr/w Enumerated Values: 1 yes 2 no 3 restricted	.1.3.6.1.4.1.6889.2.6.4.3.1.15
avSurvTrunkGroupSendCallingNumber Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. Default is no.	Enumerationr/w Enumerated Values: 1 yes 2 no 3 restricted	.1.3.6.1.4.1.6889.2.6.4.3.1.16
avSurvTrunkGroupNumberingFormat Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. SLS only supports unknown(1) and public(2). Default is unknown.	Enumerationr/w Enumerated Values: 1 unknown 2 public 3 private 4 unknownPrivate	.1.3.6.1.4.1.6889.2.6.4.3.1.17
avSurvTrunkGroupIncomingDestination Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls	OctetStringr/w Constraints: range: 0-13	.1.3.6.1.4.1.6889.2.6.4.3.1.18
avSurvTrunkGroupIncomingDialTone Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.6889.2.6.4.3.1.19
avSurvTrunkGroupR2MFCSignaling Determines MFC signaling set to be used. This only applies to R2MFC trunks. This feature not supported in SLS for R4.0	Enumerationr/w Enumerated Values: 1 set1 2 set2 3 set3 4 set4 5 set5 6 set6 7 set7 8 set8	.1.3.6.1.4.1.6889.2.6.4.3.1.20
avSurvTrunkGroupTrunkHunt Determines the method in which the SLS call engine selects from the trunk group pool of available trunks. This only applies to digital trunks.	Enumerationr/w Enumerated Values: 1 ascend 2 cyclical 3 descend	.1.3.6.1.4.1.6889.2.6.4.3.1.21
avSurvTrunkGroupDs1Supervision Applies to non-ISDN DS1 trunks: Specifies the type of incomming/outgoing supervision that is used on these trunks.	Enumerationr/w Enumerated Values: 3 loopStart 4 groundStart 5 winkWink 6 winkImmediate 7 winkAuto 8 immediateImmediate 9 autoAuto 10 autoWink	.1.3.6.1.4.1.6889.2.6.4.3.1.22
avSurvTrunkGroupCbc Applies to ISDN DS1 trunks: Specifies whether the trunk is to operate in call-by-call basis. If yes, then send the NSF IE.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.6889.2.6.4.3.1.23
avSurvTrunkGroupCbcServiceFeature Applies to ISDN DS1 trunks: Specifies the type of service or feature specifed in the NSF IE for outbound trunk calls. Only valid if CBC=yes.	Enumerationr/w Enumerated Values: 197 operator 198 suboperator 225 sdn 227 megacom 231 lds 246 scocs	.1.3.6.1.4.1.6889.2.6.4.3.1.24
avSurvTrunkGroupCbcParameter Applies to ISDN DS1 trunks: Specifies the class of service being offered as part of Selective Class of Call Selection (scocs)service mode. Only valid if service mode is scocs.	Integer32r/w Constraints: range: 0-99999	.1.3.6.1.4.1.6889.2.6.4.3.1.25
avSurvTrunkGroupBusyDisconnect Applies to Analog Loop Start Trunks: Specifies whether the presence of busy tone signal will cause the trunk call to be disconnected. Default = no.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.6889.2.6.4.3.1.26

Trunk table

avSurvTrunkEntry row .1.3.6.1.4.1.6889.2.6.4.4.1

Each entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number

Indexes

avSurvTrunkGroupRefNumber avSurvTrunkIndex

Column	Syntax	OID
avSurvTrunkGroupRefNumber Trunk Pool Group Reference Number - Association of trunk pool with trunk group	Integer32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.6889.2.6.4.4.1.1
avSurvTrunkIndex trunk table index	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.6889.2.6.4.4.1.2
avSurvTrunkInterfaceIndex Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type Note: This element has been deprecated in SLS R4.1. For legacy trunks, use avSurvTrunk…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.6889.2.6.4.4.1.3
avSurvTrunkRowStatus Create/Delete a row entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.4.1.4
avSurvTrunkSlotPort ACM slot/port in the Vyxx format	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.6889.2.6.4.4.1.5
avSurvTrunkSigGroupRefNumber Signaling Group Number that is the manager of this ISDN trunk member	Integer32r/w Constraints: range: 1-650	.1.3.6.1.4.1.6889.2.6.4.4.1.6

Automatic Route Selection (ARS) Table

avSurvArsEntry row .1.3.6.1.4.1.6889.2.6.4.5.1

Each entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length

Indexes

avSurvDialIndex

Column	Syntax	OID
avSurvDialIndex Call Pattern index	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.6889.2.6.4.5.1.1
avSurvDialString Dialed string entry that is used to match a pattern within the user-dialed number	OctetStringr/w Constraints: range: 1-18	.1.3.6.1.4.1.6889.2.6.4.5.1.2
avSurvDialType Call Type	Enumerationr/w Enumerated Values: 1 emergency 2 foreignNumberingPlanArea 3 homeNumberingPlanArea 4 international 5 internationalOperator 6 local 7 national 8 operator 9 service	.1.3.6.1.4.1.6889.2.6.4.5.1.3
avSurvDialMaximumLength Maximum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the dialed string	Integer32r/w Constraints: range: 1-28	.1.3.6.1.4.1.6889.2.6.4.5.1.4
avSurvDialGroupRefNumber Call group reference number	Integer32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.6889.2.6.4.5.1.5
avSurvDialAction Call dial action	Enumerationr/w Enumerated Values: 1 denyCall 2 allowCall	.1.3.6.1.4.1.6889.2.6.4.5.1.6
avSurvDialRowStatus Create/Delete a row entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.5.1.7
avSurvDialDeleteDigits Specifies the number of dialed digits to be deleted from the beginning of the string	Integer32r/w Constraints: range: 0-28	.1.3.6.1.4.1.6889.2.6.4.5.1.8
avSurvDialInsertDigits Specifies the digit string to be inserted. Includes ',' for pause.	OctetStringr/w Constraints: range: 0-36	.1.3.6.1.4.1.6889.2.6.4.5.1.9
avSurvDialMinimumLength Minimum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the avSurvDialString element	Integer32r/w Constraints: range: 1-28	.1.3.6.1.4.1.6889.2.6.4.5.1.10

Automatic Route Selection Facility Table

avSurvFacEntry row .1.3.6.1.4.1.6889.2.6.4.6.1

Each entry contains index, an ARS Facility dialing code and the Type of FAC feature

Indexes

avSurvFacIndex

Column	Syntax	OID
avSurvFacIndex Fac Index	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.6889.2.6.4.6.1.1
avSurvFacId ARS Facility dialing code	OctetStringr/w Constraints: range: 1-4	.1.3.6.1.4.1.6889.2.6.4.6.1.2
avSurvFacRowStatus Create/Delete a row entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.6.1.3
avSurvFacType Feature Access Code(FAC) dial codes Supported	Enumerationr/w Enumerated Values: 1 ars1 2 ars2 3 hold 4 contactOpen 5 contactClose 6 contactPulse	.1.3.6.1.4.1.6889.2.6.4.6.1.4

Ip Voice Codec Set Table

avSurvIpVoiceCodecSetEntry row .1.3.6.1.4.1.6889.2.6.4.7.1

Each entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames

Indexes

avSurvIpVoiceCodecSetNum avSurvIpVoiceCodecSetIndex

Column	Syntax	OID
avSurvIpVoiceCodecSetNum Ip Codec Set Identification	Integer32r/w Constraints: range: 1-7	.1.3.6.1.4.1.6889.2.6.4.7.1.1
avSurvIpVoiceCodecSetIndex Ip Codec Index	Integer32r/w Constraints: range: 1-7	.1.3.6.1.4.1.6889.2.6.4.7.1.2
avSurvIpVoiceCodecSetPriority Priority of codec set type (determines preferential use)	Integer32r/w Constraints: range: 1-7	.1.3.6.1.4.1.6889.2.6.4.7.1.3
avSurvIpVoiceCodecSetType Ip Codec Type	Enumerationr/w Enumerated Values: 1 g711u 2 g711a 3 g723 4 g729 5 g729a 6 g729b 7 g729ab	.1.3.6.1.4.1.6889.2.6.4.7.1.4
avSurvIpVoiceCodecSetSilence IP Codec Silence Suppression	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6889.2.6.4.7.1.5
avSurvIpVoiceCodecSetFrames IP Codec number of frames	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.6889.2.6.4.7.1.6
avSurvIpVoiceCodecSetRowStatus Create/Delete a row entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.7.1.7

Slot Configuration Table

avSurvSlotConfigEntry row .1.3.6.1.4.1.6889.2.6.4.9.1

Each entry contains an index, number id, board type, and row status

Indexes

avSurvSlotConfigIndex

Column	Syntax	OID
avSurvSlotConfigIndex Slot Config Table Index	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6889.2.6.4.9.1.1
avSurvSlotConfigNumberId This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.6889.2.6.4.9.1.2
avSurvSlotConfigBoardType Type of media module in the associated slot mm312 has 24 low-density DCP station ports mm710 has one DS1 interface mm711 has 8 port universal analog mm712 has 8 DCP station ports mm714 has 4 analog trunk ports and 4 ana…	Enumerationr/w Enumerated Values: 2 mm720 3 mm712 4 mm711 5 mm710 7 mm714 8 mm722 9 anaImm1t2l 14 mm717 16 anaImm4t2l 17 briImm 18 dcpImm 19 ds1Imm 22 mm716 23 tgm550 24 tim514 25 tim510 26 tim521 29 tim508 30 tim516 31 tim518 32 mm312	.1.3.6.1.4.1.6889.2.6.4.9.1.3
avSurvSlotConfigRowStatus Create/Delete a row entry in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.9.1.4

DS1 trunk instantiation Table

avSurvDs1Entry row .1.3.6.1.4.1.6889.2.6.4.10.1

Each entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id.

Indexes

avSurvDs1Index

Column	Syntax	OID
avSurvDs1Index DS1 Table Index	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.6889.2.6.4.10.1.1
avSurvDs1Name Name of the service provider and/or site destination of DS1 facility	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.6889.2.6.4.10.1.2
avSurvDs1BitRate Maximum transmission rate for DS1 interface	Enumerationr/w Enumerated Values: 1 rate1544 2 rate2048	.1.3.6.1.4.1.6889.2.6.4.10.1.3
avSurvDs1SignalingMode Selects the signaling method deployed on the given DS1 facility	Enumerationr/w Enumerated Values: 1 cas 2 robbedBit 3 isdnPri 4 isdnExt	.1.3.6.1.4.1.6889.2.6.4.10.1.4
avSurvDs1ChannelNumbering Channel numbering scheme; E1 interface for ETSI and QSIG requires sequential encoding from 1 to 30	Enumerationr/w Enumerated Values: 1 sequential 2 timeSlot	.1.3.6.1.4.1.6889.2.6.4.10.1.5
avSurvDs1Connect Specifies what type of equipment is at the far end of the DS1 link	Enumerationr/w Enumerated Values: 1 host 2 network 3 pbx 4 lineSide	.1.3.6.1.4.1.6889.2.6.4.10.1.6
avSurvDs1Interface Determines glare handling	Enumerationr/w Enumerated Values: 0 user 1 network 3 peerMaster 4 peerSlave	.1.3.6.1.4.1.6889.2.6.4.10.1.7
avSurvDs1Side QSIG glare handling when interface field is peerSlave	Enumerationr/w Enumerated Values: 0 a 1 b	.1.3.6.1.4.1.6889.2.6.4.10.1.8
avSurvDs1CountryProtocol Specifies the Layer 3 signaling protocol used by the country-specific service provider. This applies to ISDN trunk.	Enumerationr/w Enumerated Values: 1 country1 2 country2 3 country3 4 country4 5 country5 6 country6 7 country7 8 country8 9 country9 10 country10 11 country11 12 country12 13 country13 14 country14 15 country15 16 country16 17 country17 18 country18 19 country19 20 country20 21 country21 22 country22 23 country23 24 country24 25 country25 62 etsi 63 qsig	.1.3.6.1.4.1.6889.2.6.4.10.1.9
avSurvDs1ProtocolVersion Used in countries whose public networks allow multiple Layer-3 signaling protocols for ISDN PRI service.	Enumerationr/w Enumerated Values: 0 a 1 b 2 c 3 d	.1.3.6.1.4.1.6889.2.6.4.10.1.10
avSurvDs1BearerCapability Sets the information transfer capability in the Bearer Capability IE of SETUP message for ISDN PRI service.	Enumerationr/w Enumerated Values: 0 threeKhz 1 speech	.1.3.6.1.4.1.6889.2.6.4.10.1.11
avSurvDs1InterfaceCompanding Specifies the companding method used by the far-end switch	Enumerationr/w Enumerated Values: 1 alaw 2 ulaw	.1.3.6.1.4.1.6889.2.6.4.10.1.12
avSurvDs1LongTimer Specifies whether the duration of the T302 and T303 Q.931 timers should be extended to a longer duration. Used for Russia country code	Enumerationr/w Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.6889.2.6.4.10.1.13
avSurvDs1RowStatus Create/Delete a row entry in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.10.1.14
avSurvDs1SlotNumberId This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.6889.2.6.4.10.1.15

Signaling Group, associated with an ISDN trunk group, Table

avSurvSigGroupEntry row .1.3.6.1.4.1.6889.2.6.4.11.1

Each entry contains an index, channel selection, associated signaling, primary D channel, and row status

Indexes

avSurvSigGroupIndex

Column	Syntax	OID
avSurvSigGroupIndex SigGroup Table Index	Integer32r/w Constraints: range: 1-650	.1.3.6.1.4.1.6889.2.6.4.11.1.1
avSurvSigGroupChannelSelection If there is more than one trunk group assigned to this signaling group, the channel selection number is the trunk group that can accept incoming calls	Integer32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.6889.2.6.4.11.1.2
avSurvSigGroupAssociatedSignaling Specifies whether the D-channel is physically associated in the DS1 facility, yes = D-channel present	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.6889.2.6.4.11.1.3
avSurvSigGroupPrimaryDChannel The identity for the D-channel 3 digit gw number + 2 character slot number + 2 digit port circuit number	OctetStringr/w Constraints: range: 7-7	.1.3.6.1.4.1.6889.2.6.4.11.1.4
avSurvSigGroupRowStatus Create/Delete a row entry in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.11.1.5

BRI trunk instantiation Table

avSurvBriEntry row .1.3.6.1.4.1.6889.2.6.4.12.1

Each entry contains an index, name, interface, side, country-protocol,
bearer-capability, interface-companding, tei-assignment, directory-numberA,
directory-numberB, spidA, spidB, endpoint-initialization,
layer1-stabl…

Indexes

avSurvBriIndex

Column	Syntax	OID
avSurvBriIndex BRI Table Index Note: G250-BRI supports 2 ports (4-channels) G350/IG550 is allocated a max of 24 ports (48-channels) G430/G450 is allocated a max of 64 ports (128 channels).	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.6889.2.6.4.12.1.1
avSurvBriName Name of the service provider and/or site destination of BRI facility	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.6889.2.6.4.12.1.2
avSurvBriInterface Determines glare handling. Non-QSIG calls: a-network, b-user; QSIG calls: a-peerMaster, b-peerSlave	Enumerationr/w Enumerated Values: 0 user 1 network 3 peerMaster 4 peerSlave	.1.3.6.1.4.1.6889.2.6.4.12.1.3
avSurvBriSide QSIG glare handling when interface field is peerSlave	Enumerationr/w Enumerated Values: 0 a 1 b	.1.3.6.1.4.1.6889.2.6.4.12.1.4
avSurvBriCountryProtocol Specifies the Layer 3 signaling protocol used by the country-specific service provider	Enumerationr/w Enumerated Values: 1 country1 2 country2 3 country3 4 country4 5 country5 6 country6 7 country7 8 country8 9 country9 10 country10 11 country11 12 country12 13 country13 14 country14 15 country15 16 country16 17 country17 18 country18 19 country19 20 country20 21 country21 22 country22 23 country23 24 country24 25 country25 62 etsi 63 qsig	.1.3.6.1.4.1.6889.2.6.4.12.1.5
avSurvBriBearerCapability Sets the information transfer capability in the Bearer Capability IE of SETUP message	Enumerationr/w Enumerated Values: 0 threeKhz 1 speech	.1.3.6.1.4.1.6889.2.6.4.12.1.6
avSurvBriInterfaceCompanding Specifies the companding method used )for all circuits on this media module) by the far-end switch	Enumerationr/w Enumerated Values: 1 alaw 2 ulaw	.1.3.6.1.4.1.6889.2.6.4.12.1.7
avSurvBriTeiAssignment LAPD address assignment for TEI field, auto is assigned by network provider	Enumerationr/w Enumerated Values: 1 auto 2 zero	.1.3.6.1.4.1.6889.2.6.4.12.1.8
avSurvBriDirectoryNumberA Channel B1's directory number	OctetStringr/w Constraints: range: 1-10	.1.3.6.1.4.1.6889.2.6.4.12.1.9
avSurvBriDirectoryNumberB Channel B2's directory number	OctetStringr/w Constraints: range: 1-10	.1.3.6.1.4.1.6889.2.6.4.12.1.10
avSurvBriSpidA Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B1	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.6889.2.6.4.12.1.11
avSurvBriSpidB Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B2	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.6889.2.6.4.12.1.12
avSurvBriEndpointInit Determines whether the far end supports endpoint initialization	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.6889.2.6.4.12.1.13
avSurvBriLayer1Stable Determines whether to expect the network to drop BRI layer 1 when no calls are active. yes = keep layer 1 stable	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.6889.2.6.4.12.1.14
avSurvBriRowStatus Create/Delete a row entry in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.12.1.15
avSurvBriSlotPortNumberId This is the string identifier formed by the combination of the slot identifier that CM uses to identify the slot of the media gateway(first character is a v followed by one numeric character). The port consists of two n…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.6889.2.6.4.12.1.16

Incoming Routing Table

avSurvIncomingRoutingEntry row .1.3.6.1.4.1.6889.2.6.4.13.1

Each entry contains a dual index(trunk-group-reference-number and
table index), match-pattern, delete-digits, insert-digits specification
and routing-mode.
This table instantiation completely specifies an the digit h…

Indexes

avSurvIncomingRoutingGroupRefNumber avSurvIncomingRoutingIndex

Column	Syntax	OID
avSurvIncomingRoutingGroupRefNumber Incoming trunk-group reference number	Integer32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.6889.2.6.4.13.1.1
avSurvIncomingRoutingIndex Incoming Routing Table Index	Integer32r/w Constraints: range: 1-50	.1.3.6.1.4.1.6889.2.6.4.13.1.2
avSurvIncomingRoutingMatchPattern Dial-string entry that is used to match a pattern on inbound trunk calls. Note that '0' is used to designate the blank or empty string value as a wild card match.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.6889.2.6.4.13.1.3
avSurvIncomingRoutingLength Maximum length of the user-dialed number that the SLS call-engine collects before beginning the pattern matching. Note that CM uses the blank as a wild card, subject to rule of the MatchPattern field being set to a wil…	Enumerationr/w Enumerated Values: 0 len0 1 len1 2 len2 3 len3 4 len4 5 len5 6 len6 7 len7 8 len8 9 len9 10 len10 11 len11 12 len12 13 len13 14 len14 15 len15 16 len16 17 len17 18 len18 19 len19 20 len20 21 len21 99 blank	.1.3.6.1.4.1.6889.2.6.4.13.1.4
avSurvIncomingRoutingDeleteDigits Specifies the number of dialed digits to be deleted from the beginning of the incoming trunk's received digit string	Integer32r/w Constraints: range: 0-21	.1.3.6.1.4.1.6889.2.6.4.13.1.5
avSurvIncomingRoutingInsertDigits Specifies the digit string to be inserted (after the deletion process has been completed) to the incoming trunk digit string	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.6889.2.6.4.13.1.6
avSurvIncomingRoutingMode Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks.	Enumerationr/w Enumerated Values: 0 enbloc 1 overlap	.1.3.6.1.4.1.6889.2.6.4.13.1.7
avSurvIncomingRoutingRowStatus Create/Delete a row entry in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.13.1.8

Signaling Group Nfas , associated with an ISDN trunk group, Table

avSurvNfasEntry row .1.3.6.1.4.1.6889.2.6.4.14.1

Each entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status

Indexes

avSurvNfasSigGroupRefNumber avSurvNfasIndex

Column	Syntax	OID
avSurvNfasSigGroupRefNumber Entry pointing to the associated signaling group number in the signaling group table	Integer32r/w Constraints: range: 1-650	.1.3.6.1.4.1.6889.2.6.4.14.1.1
avSurvNfasIndex Nfas Table Index	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6889.2.6.4.14.1.2
avSurvNfasInterface The identity for the NFAS DS1 facility group: 3 digit gateway number + 2 character slot number	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.6889.2.6.4.14.1.3
avSurvNfasInterfaceId For an NFAS circuit, this specifies the identification number of the DS1 circuit that is associated with this NFAS group. Note that this ID number must be coordinated with the PSTN provider so that the signaling protoc…	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.6889.2.6.4.14.1.4
avSurvNfasRowStatus Create/Delete a row entry in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.6.4.14.1.5