Standard view Table view

AUTOMATION-SYSTEM-MIB

        
Definition of generic management objects 
which describe a general I IA product.
Source file
AUTOMATION-SYSTEM-MIB
Last revised
Identity
automationSystemMIB
Base OID
1.3.6.1.4.1.4329.6.3.2
Imported Objects
AUTOMATION-SMI automationMgmt
AUTOMATION-TC AutomationFunctionStringTC AutomationLocationStringTC AutomationOrderNumberTC AutomationSerialNumberTC AutomationTriggerTC AutomationVersionNumberTC
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DateAndTime DisplayString
Net-SNMP examples using the siemens MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'AUTOMATION-SYSTEM-MIB' -M '/opt/observium/mibs/siemens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'AUTOMATION-SYSTEM-MIB::automationSystemMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AUTOMATION-SYSTEM-MIB' -M '/opt/observium/mibs/siemens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AUTOMATION-SYSTEM-MIB::automationSystemMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (40)
automationSystemMIB
.1.3.6.1.4.1.4329.6.3.2
automationSystemObjects
.1.3.6.1.4.1.4329.6.3.2.1
automationSystemIdent
.1.3.6.1.4.1.4329.6.3.2.1.1
automationManufacturerId
Unsigned32
 .1.3.6.1.4.1.4329.6.3.2.1.1.1
automationGeoLatitude r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.4329.6.3.2.1.1.10
automationGeoLongitude r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.4329.6.3.2.1.1.11
automationGeoHeight r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.4329.6.3.2.1.1.12
automationTimeZoneOffsetHours r/w
Integer32
 .1.3.6.1.4.1.4329.6.3.2.1.1.13
automationTimeZoneOffsetMinutes r/w
Integer32
 .1.3.6.1.4.1.4329.6.3.2.1.1.14
automationSwUser
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.4329.6.3.2.1.1.15
automationSwDate
SNMPv2-TCDateAndTime
 .1.3.6.1.4.1.4329.6.3.2.1.1.16
automationOrderNumber
AUTOMATION-TCAutomationOrderNumberTC
 .1.3.6.1.4.1.4329.6.3.2.1.1.2
automationSerialNumber
AUTOMATION-TCAutomationSerialNumberTC
 .1.3.6.1.4.1.4329.6.3.2.1.1.3
automationHwRevision
AUTOMATION-TCAutomationVersionNumberTC
 .1.3.6.1.4.1.4329.6.3.2.1.1.4
automationSwRevision
AUTOMATION-TCAutomationVersionNumberTC
 .1.3.6.1.4.1.4329.6.3.2.1.1.5
automationRevisionCounter
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4329.6.3.2.1.1.6
automationRevisionDate
SNMPv2-TCDateAndTime
 .1.3.6.1.4.1.4329.6.3.2.1.1.7
automationFunctionTag
AUTOMATION-TCAutomationFunctionStringTC
 .1.3.6.1.4.1.4329.6.3.2.1.1.8
automationLocationTag
AUTOMATION-TCAutomationLocationStringTC
 .1.3.6.1.4.1.4329.6.3.2.1.1.9
automationSystemStatus
.1.3.6.1.4.1.4329.6.3.2.1.2
automationOperState
Enumeration
 .1.3.6.1.4.1.4329.6.3.2.1.2.1
automationApplicationOperState
Enumeration
 .1.3.6.1.4.1.4329.6.3.2.1.2.2
automationSystemGeneric
.1.3.6.1.4.1.4329.6.3.2.1.3
automationSystemRestart r/w
Enumeration
 .1.3.6.1.4.1.4329.6.3.2.1.3.1
automationPowerUpCount
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4329.6.3.2.1.3.3
automationResetCounters r/w
AUTOMATION-TCAutomationTriggerTC
 .1.3.6.1.4.1.4329.6.3.2.1.3.4
automationConfigId
OctetString
 .1.3.6.1.4.1.4329.6.3.2.1.3.5
automationConfigUser
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.4329.6.3.2.1.3.6
automationConfigDate
SNMPv2-TCDateAndTime
 .1.3.6.1.4.1.4329.6.3.2.1.3.7
automationSystemIp
.1.3.6.1.4.1.4329.6.3.2.1.4
automationSystemIpAddress deprecated r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4329.6.3.2.1.4.1
automationSystemIpSubnetMask deprecated r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4329.6.3.2.1.4.2
automationSystemIpGateway deprecated r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4329.6.3.2.1.4.3
automationSystemOutbandIp deprecated r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4329.6.3.2.1.4.4
automationSystemOutbandSubnetMask deprecated r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4329.6.3.2.1.4.5
automationSystemNotifications
.1.3.6.1.4.1.4329.6.3.2.2
automationSystemNotificationsV2
.1.3.6.1.4.1.4329.6.3.2.2.0
automationSystemConformance
.1.3.6.1.4.1.4329.6.3.2.3
automationSystemGroups
.1.3.6.1.4.1.4329.6.3.2.3.1
automationSystemCompliances
.1.3.6.1.4.1.4329.6.3.2.3.2
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SIEMENS-SMIsiemens
  3. AUTOMATION-SMIsiemens
  4. SNMPv2-TCrfc
  5. AUTOMATION-TCsiemens
  6. SNMPv2-CONFrfc
  7. AUTOMATION-SYSTEM-MIBsiemensselected
Conformance Groups (14)
automationIM0Group
automationManufacturerId automationOrderNumber automationSerialNumber automationHwRevision automationSwRevision automationRevisionCounter
This group collects the named parameters
according to the referenced guideline.
 .1.3.6.1.4.1.4329.6.3.2.3.1.1
automationIM1Group
automationFunctionTag automationLocationTag
This group collects the named parameters
according to the referenced guideline.
 .1.3.6.1.4.1.4329.6.3.2.3.1.2
automationIM2Group
automationRevisionDate
This group collects the named parameters
according to the referenced guideline.
The revision date is only available if
the system supports an absolute time,
therefore this group must be only
supported if the absolute time is
available.
 .1.3.6.1.4.1.4329.6.3.2.3.1.3
automationStatusGroup
automationOperState automationApplicationOperState
Generic status information.
 .1.3.6.1.4.1.4329.6.3.2.3.1.4
automationRemoteRestartGroup
automationSystemRestart automationPowerUpCount
Allows restart via SNMP.
 .1.3.6.1.4.1.4329.6.3.2.3.1.5
automationResetCounterGroup
automationResetCounters
Allows reset of all counters.
 .1.3.6.1.4.1.4329.6.3.2.3.1.6
automationIpGroup deprecated
automationSystemIpAddress automationSystemIpSubnetMask automationSystemIpGateway
IP configuration of the agent.
 .1.3.6.1.4.1.4329.6.3.2.3.1.7
automationOutbandGroup deprecated
automationSystemOutbandIp automationSystemOutbandSubnetMask
Configuration of the outband port.
 .1.3.6.1.4.1.4329.6.3.2.3.1.8
automationStatusEvents
automationOperStateChanged
Notifications about status changes.
 .1.3.6.1.4.1.4329.6.3.2.3.1.9
automationConfigurationEvents
automationRevisionChanged
Notifications about configuration changes.
 .1.3.6.1.4.1.4329.6.3.2.3.1.10
automationGeoLocation
automationGeoLatitude automationGeoLongitude automationGeoHeight
This group collects the named parameters
according to the geographical coordinates.
 .1.3.6.1.4.1.4329.6.3.2.3.1.11
automationGeoLocationTimeShift
automationGeoLatitude automationGeoLongitude automationGeoHeight automationTimeZoneOffsetHours automationTimeZoneOffsetMinutes
This group collects the named parameters
according to the geographical coordinates
and the location dependent time shift.
 .1.3.6.1.4.1.4329.6.3.2.3.1.12
automationConfigIdGroup
automationConfigId automationConfigUser automationConfigDate
This group collects the named parameters
for the suppport of a config signature.
 .1.3.6.1.4.1.4329.6.3.2.3.1.13
automationSwDownloadGroup
automationSwUser automationSwDate
This group collects the named parameters
for a firmware download.
 .1.3.6.1.4.1.4329.6.3.2.3.1.14
Compliance Statements (3)

OID .1.3.6.1.4.1.4329.6.3.2.3.2.1
Minimum implementation requirements for all
Industry Automation Division systems
with SNMP support.
Required groups
mandatory automationIM0Group
optional automationIM1Group Required if the system provides I&M 1.
optional automationIM2Group Required if the system provides I&M 2.
optional automationStatusGroup Required if the system provides a
collective status information.
optional automationResetCounterGroup Required for systems which provide a
reset of all their counters.

OID .1.3.6.1.4.1.4329.6.3.2.3.2.2
Extended requirements for
Industry Automation Division systems.
Required groups
mandatory automationIM0Group
optional automationIM1Group Required if the system provides I&M 1.
optional automationIM2Group Required if the system provides I&M 2.
optional automationIpGroup Required if the system allows configuring of
the IP parameters via SNMP and no other MIBs
are implemented which support management of
this parameters.
optional automationOutbandGroup Required if the system provides an outband
port and management of this port is allowed
via SNMP and no other MIBs are implemented
which support management of the outband
port.
optional automationRemoteRestartGroup Required if restart of the system via
SNMP allowed.
optional automationStatusGroup Required if the system provides a
collective status information.
optional automationResetCounterGroup Required for systems which provide a
reset of all their counters.
optional automationConfigurationEvents Required for systems which provide
notifications.
optional automationStatusEvents Required for systems which provide
notifications.
optional automationGeoLocation Required for systems which provide
geographical coordinates.
optional automationGeoLocationTimeShift Required for systems which provide
geographical coordinates and time shift.

OID .1.3.6.1.4.1.4329.6.3.2.3.2.3
Extended requirements for
Industry Automation Division systems.
Required groups
mandatory automationIM0Group
optional automationIM1Group Required if the system provides I&M 1.
optional automationIM2Group Required if the system provides I&M 2.
optional automationRemoteRestartGroup Required if restart of the system via
SNMP allowed.
optional automationStatusGroup Required if the system provides a
collective status information.
optional automationResetCounterGroup Required for systems which provide a
reset of all their counters.
optional automationConfigurationEvents Required for systems which provide
notifications.
optional automationStatusEvents Required for systems which provide
notifications.
optional automationGeoLocation Required for systems which provide
geographical coordinates.
optional automationGeoLocationTimeShift Required for systems which provide
geographical coordinates and time shift.
optional automationConfigIdGroup Required for systems which provide
configuration signatures.
optional automationSwDownloadGroup Required for systems which support
firmware download.
Notifications / Traps (2)
NameOIDDescription
automationOperStateChanged
automationOperState
.1.3.6.1.4.1.4329.6.3.2.2.0.1
The system triggers this event in case the
value of automationOperState changed.
automationRevisionChanged
.1.3.6.1.4.1.4329.6.3.2.2.0.2
The system triggers this event in case the
configuration changed (e. g. the hardware
configuration, a firmware update or IP
parameter).