ATTOBRIDGE-MIB Table View

The temperature sensor table stores information about 
the bridge temperature sensor.

tempSensorEntry row .1.3.6.1.4.1.4547.1.2.2.1.1

The temperature sensor table stores information about
the bridge temperature sensor.

Indexes

No indexes recorded

Column	Syntax	OID
tempSensorIndex Used to index the sensor in the temperature sensor table.	Integer32	.1.3.6.1.4.1.4547.1.2.2.1.1.1
tempSensorStatus The current status of the sensor (normal, warning or critical).	Enumeration	.1.3.6.1.4.1.4547.1.2.2.1.1.2
temperature The current temperature of the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.2.1.1.3

The voltage sensor table stores information about 
the bridge voltage sensor.

voltageSensorEntry row .1.3.6.1.4.1.4547.1.2.2.2.1

The voltage sensor table stores information about
the bridge voltage sensor.

Indexes

No indexes recorded

Column	Syntax	OID
voltageSensorIndex Used to index the sensor in the voltage sensor table.	Integer32	.1.3.6.1.4.1.4547.1.2.2.2.1.1
voltageSensorStatus The current status of the sensor (normal, warning or critical).	Enumeration	.1.3.6.1.4.1.4547.1.2.2.2.1.2
voltage The current voltage of the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.2.2.1.3

The device table stores information about the devices
attached to the bridge.

deviceEntry row .1.3.6.1.4.1.4547.1.2.2.5.1

The device table stores information about the devices
attached to the bridge.

Indexes

No indexes recorded

Column	Syntax	OID
deviceCacheIndex Used to index the device table.	Integer32	.1.3.6.1.4.1.4547.1.2.2.5.1.1
deviceSource A string representing the source interface, meaning the interface exposed to the host.	OctetString	.1.3.6.1.4.1.4547.1.2.2.5.1.2
deviceDestination A string representing the destination interface, meaning the interface of the target device.	OctetString	.1.3.6.1.4.1.4547.1.2.2.5.1.3
deviceType Device type (i.e. DISK, TAPE, etc.) of attached device.	OctetString	.1.3.6.1.4.1.4547.1.2.2.5.1.4
deviceVendor Vendor name of attached device, from inquiry data.	OctetString	.1.3.6.1.4.1.4547.1.2.2.5.1.5
deviceProduct Product name of attached device, from inquiry data.	OctetString	.1.3.6.1.4.1.4547.1.2.2.5.1.6
deviceRevision Revision of attached device, from inquiry data.	OctetString	.1.3.6.1.4.1.4547.1.2.2.5.1.7
deviceState The current state of the device (online, offline, or unknown).	Enumeration	.1.3.6.1.4.1.4547.1.2.2.5.1.8

The Device Error table stores information about errors that
have occurred with the devices attached to the bridge.

errorEntry row .1.3.6.1.4.1.4547.1.2.2.8.1

The Device Error table stores information about errors that
have occurred with the devices attached to the bridge.

Indexes

No indexes recorded

Column	Syntax	OID
errorIndex Used to index the error device table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.2.8.1.1
errorDateStamp Date at which the error occurred.	OctetString	.1.3.6.1.4.1.4547.1.2.2.8.1.2
errorTimeStamp Time at which the error occurred.	OctetString	.1.3.6.1.4.1.4547.1.2.2.8.1.3
errorInitiator A string representing the initiator which issued the failed command.	OctetString	.1.3.6.1.4.1.4547.1.2.2.8.1.4
errorSource A string representing the source interface, meaning the interface exposed to the host, which is associated with the error.	OctetString	.1.3.6.1.4.1.4547.1.2.2.8.1.5
errorOpCode OpCode of the command which failed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.2.8.1.6
errorSenseKey Sense Key returned as a result of the failed command.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.2.8.1.7
errorASC ASC returned as a result of the failed command.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.2.8.1.8
errorASCQ ASCQ returned as a result of the failed command.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.2.8.1.9
errorLogSense Log Sense returned as a result of the failed command.	OctetString	.1.3.6.1.4.1.4547.1.2.2.8.1.10

A table containing a row for each IP address/port number that
traps will be sent to.

trapClientEntry row .1.3.6.1.4.1.4547.1.2.3.3.1

Ip/Port pair for a specific client.

Indexes

No indexes recorded

Column	Syntax	OID
trapClientIndex Used to index a trap client in the trapClientTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4547.1.2.3.3.1.1
trapClientIpAddress The IP address of a client registered for traps in dotted notation.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4547.1.2.3.3.1.2
trapClientPort The UDP port to send traps for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.	Integer32	.1.3.6.1.4.1.4547.1.2.3.3.1.3
trapClientFilter This value defines the trap severity filter for this trap host. The unit will send traps to this host that have a severity level less than or equal to this value. The default value of this object is 'warning'.	Enumeration	.1.3.6.1.4.1.4547.1.2.3.3.1.4
trapClientRowState Specifies the state of the row. rowDestroy READ : Can never happen WRITE : Remove this row from the table. rowInactive READ : Indicates that this row does not exist, but that traps are not enab…	Enumerationr/w	.1.3.6.1.4.1.4547.1.2.3.3.1.5