ATTO6500N-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
57
.1.3.6.1.4.1.4547.2.3.2.12 · 1 row entry · 5 columns
Uses the atto variant from /opt/observium/mibs/atto.
Command help
Walk fcSFPInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATTO6500N-MIB' -M '/opt/observium/mibs/atto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATTO6500N-MIB::fcSFPInfoTable'
Stores configuration information relating to installed FibreChannel SFPs.
fcSFPInfoEntry row .1.3.6.1.4.1.4547.2.3.2.12.1
Stores information about installed fibre channel SFPs.
Indexes
Column Syntax OID
fcSFPIndexUsed to index the SFP in the SFP Info table.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.4547.2.3.2.12.1.1
fcSFPVendorSFP vendor nameOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.4547.2.3.2.12.1.2
fcSFPSerialNumSFP serial numberOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.4547.2.3.2.12.1.3
fcSFPPartNumSFP vendor-supplied part numberOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.4547.2.3.2.12.1.4
fcSFPDataRateCapabilityMaximum data rate capability of the fibre channel SFP.Enumeration
Enumerated Values:
2gb2
4gb4
8gb8
16gb16
.1.3.6.1.4.1.4547.2.3.2.12.1.5
.1.3.6.1.4.1.4547.2.3.2.13 · 1 row entry · 5 columns
Uses the atto variant from /opt/observium/mibs/atto.
Command help
Walk sasQSFPInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATTO6500N-MIB' -M '/opt/observium/mibs/atto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATTO6500N-MIB::sasQSFPInfoTable'
Stores configuration information relating to installed SAS QSFPs.
sasQSFPInfoEntry row .1.3.6.1.4.1.4547.2.3.2.13.1
Stores information about installed SAS QSFPs.
Indexes
Column Syntax OID
sasQSFPIndexUsed to index the QSFP in the QSFP Info table.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.4547.2.3.2.13.1.1
sasQSFPVendorQSFP vendor nameOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.4547.2.3.2.13.1.2
sasQSFPSerialNumQSFP serial numberOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.4547.2.3.2.13.1.3
sasQSFPTypeQSFP typeQSFPTech
Type Values:
-1unknown
1optical
2activecopper
3passivecopper
.1.3.6.1.4.1.4547.2.3.2.13.1.4
sasQSFPPartNumQSFP vendor-supplied part numberOctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.4547.2.3.2.13.1.5
.1.3.6.1.4.1.4547.2.3.3.1 · 1 row entry · 12 columns
Uses the atto variant from /opt/observium/mibs/atto.
Command help
Walk fcPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATTO6500N-MIB' -M '/opt/observium/mibs/atto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATTO6500N-MIB::fcPortInfoTable'
Stores fibre channel specific information for each fibre channel port.
fcPortInfoEntry row .1.3.6.1.4.1.4547.2.3.3.1.1
Stores state and capability information about
the fibre channel ports.
Indexes
Column Syntax OID
fcPortIndexUsed to index the fibre channel port in the FC Port Entry table.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.4547.2.3.3.1.1.1
fcPortPortNumberThe fibre channel port number.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.4547.2.3.3.1.1.2
fcPortOperationalStateOperational state of the fibre channel port.Enumeration
Enumerated Values:
-1unknown
1online
2offline
.1.3.6.1.4.1.4547.2.3.3.1.1.3
fcPortAdminStateAdministrative state of the fibre channel port.
Indicates whether the port is enabled or disabled.
Enumeration
Enumerated Values:
-1unknown
1disabled
2enabled
.1.3.6.1.4.1.4547.2.3.3.1.1.4
fcPortDataRateNegotiatedCurrent negotiated data rate of fibre channel port.Enumeration
Enumerated Values:
-1unknown
2gb2
4gb4
8gb8
.1.3.6.1.4.1.4547.2.3.3.1.1.5
fcPortConnModeNegotiatedCurrent negotiated mode of the fibre channel port.Enumeration
Enumerated Values:
-1unknown
1loop
2ptp
.1.3.6.1.4.1.4547.2.3.3.1.1.6
fcPortDataRateConfiguredConfigured data rate of fibre channel port.Enumeration
Enumerated Values:
-1auto
2gb2
4gb4
8gb8
.1.3.6.1.4.1.4547.2.3.3.1.1.7
fcPortConnModeConfiguredConfigured mode of the fibre channel port.Enumeration
Enumerated Values:
1loop
2ptp
3looppreferred
4ptppreferred
.1.3.6.1.4.1.4547.2.3.3.1.1.8
fcPortDataRateCapabilityMaximum data rate capability of the fibre channel port.Enumeration
Enumerated Values:
2gb2
4gb4
8gb8
.1.3.6.1.4.1.4547.2.3.3.1.1.9
fcPortNodeNameFibre channel node name.DisplayWWN
Type Constraints:
range: 8
.1.3.6.1.4.1.4547.2.3.3.1.1.10
fcPortPortNameFibre channel port name.DisplayWWN
Type Constraints:
range: 8
.1.3.6.1.4.1.4547.2.3.3.1.1.11
fcPortPeerNameThe port name of the fabric-attached fibre channel peer.
Only valid for a switched fabric. Direct-connected fibre
channel ports will respond with all zeros.
DisplayWWN
Type Constraints:
range: 8
.1.3.6.1.4.1.4547.2.3.3.1.1.12
.1.3.6.1.4.1.4547.2.3.3.2 · 1 row entry · 12 columns
Uses the atto variant from /opt/observium/mibs/atto.
Command help
Walk fcPortStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATTO6500N-MIB' -M '/opt/observium/mibs/atto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATTO6500N-MIB::fcPortStatisticsTable'
Stores fibre channel specific I/O and error statistics 
for each fibre channel port.
fcPortStatisticsEntry row .1.3.6.1.4.1.4547.2.3.3.2.1
Stores statistics about fibre channel ports.
Indexes
Column Syntax OID
fcStatsIndexUsed to index the fibre channel port in the Fibre Channel Port
Statistics table.
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.4547.2.3.3.2.1.1
fcStatsTxWordsNumber of words transmitted on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.2
fcStatsRxWordsNumber of words received on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.3
fcStatsTimeSinceResetAmount of time since the fibre channel port statistics were
reset.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
.1.3.6.1.4.1.4547.2.3.3.2.1.4
fcStatsErrLinkFailureNumber of link failure events on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.5
fcStatsErrLossOfSyncNumber of loss of sync events on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.6
fcStatsErrInvalidCRCNumber of frames with invalid CRCs on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.7
fcStatsErrInvalidTxWordsNumber of invalid TX word events on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.8
fcStatsErrLipCountNumber of LIP events on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.9
fcStatsErrNOSCountNumber of NOS events on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.10
fcStatsErrSignalLossNumber of loss of signal events on this fibre channel port.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.11
fcStatsErrPrimitiveNumber of primitive sequential protocol errors on this
fibre channel port.
Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.2.1.12
.1.3.6.1.4.1.4547.2.3.3.3 · 1 row entry · 11 columns
Uses the atto variant from /opt/observium/mibs/atto.
Command help
Walk sasPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATTO6500N-MIB' -M '/opt/observium/mibs/atto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATTO6500N-MIB::sasPortInfoTable'
Stores SAS specific information for each
SAS port.
sasPortInfoEntry row .1.3.6.1.4.1.4547.2.3.3.3.1
Stores information about the SAS ports.
Indexes
Column Syntax OID
sasPortIndexUsed to index the SAS port in the SAS Port Entry table.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.4547.2.3.3.3.1.1
sasPortPortNumberThe SAS port number.Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.4547.2.3.3.3.1.2
sasPortOperationalStateOperational state of this entire SAS port. Degraded state is entered
when fewer than all four PHYs are online. Offline state is entered
when all four PHYs are offline.
Enumeration
Enumerated Values:
-1unknown
1online
2offline
3degraded
.1.3.6.1.4.1.4547.2.3.3.3.1.3
sasPortPhy1StateOperational state of SAS PHY 1 of this SAS port.PHYStatus
Type Values:
-1unknown
1online
2offline
.1.3.6.1.4.1.4547.2.3.3.3.1.4
sasPortPhy2StateOperational state of SAS PHY 2 of this SAS port.PHYStatus
Type Values:
-1unknown
1online
2offline
.1.3.6.1.4.1.4547.2.3.3.3.1.5
sasPortPhy3StateOperational state of SAS PHY 3 of this SAS port.PHYStatus
Type Values:
-1unknown
1online
2offline
.1.3.6.1.4.1.4547.2.3.3.3.1.6
sasPortPhy4StateOperational state of SAS PHY 4 of this SAS port.PHYStatus
Type Values:
-1unknown
1online
2offline
.1.3.6.1.4.1.4547.2.3.3.3.1.7
sasPortAdminStateAdministrative state of this SAS port.
Indicates whether the port is enabled or disabled.
Enumeration
Enumerated Values:
-1unknown
1disabled
2enabled
.1.3.6.1.4.1.4547.2.3.3.3.1.8
sasPortDataRateCapabilityMaximum data rate capability of the SAS port.Enumeration
Enumerated Values:
1gb1point5
3gb3
6gb6
.1.3.6.1.4.1.4547.2.3.3.3.1.9
sasPortDataRateNegotiatedCurrent negotiated data rate of this SAS port.Enumeration
Enumerated Values:
1gb1point5
3gb3
6gb6
.1.3.6.1.4.1.4547.2.3.3.3.1.10
sasPortAddressSAS Port Address.DisplayWWN
Type Constraints:
range: 8
.1.3.6.1.4.1.4547.2.3.3.3.1.11
.1.3.6.1.4.1.4547.2.3.3.4 · 1 row entry · 8 columns
Uses the atto variant from /opt/observium/mibs/atto.
Command help
Walk sasPhyStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATTO6500N-MIB' -M '/opt/observium/mibs/atto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATTO6500N-MIB::sasPhyStatisticsTable'
Stores SAS specific I/O and error statistics for each SAS PHY.
sasPhyStatisticsEntry row .1.3.6.1.4.1.4547.2.3.3.4.1
Stores statistics about SAS Phys.
Column Syntax OID
sasPhyStatsIndexUsed to index the SAS PHY in the SAS PHY Statistics table.Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.4547.2.3.3.4.1.1
sasPhyStatsTimeSinceResetAmount of time since the SAS PHY statistics were reset on this SAS PHY.SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
.1.3.6.1.4.1.4547.2.3.3.4.1.2
sasPhyStatsErrLinkChangedNumber of link changed events on this SAS PHY.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.4.1.3
sasPhyStatsErrInvalidCRCNumber of Invalid CRC events on this SAS PHY.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.4.1.4
sasPhyStatsErrPhyResetNumber of Phy Reset events on this SAS PHY.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.4.1.5
sasPhyStatsErrLossOfSyncNumber of loss of sync events on this SAS PHY.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.4.1.6
sasPhyStatsErrDisparityCountNumber of disparity error events on this SAS PHY.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.4.1.7
sasPhyStatsErrInvalidDwordsNumber of invalid DWORD events on this SAS PHY.Unsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4547.2.3.3.4.1.8
.1.3.6.1.4.1.4547.2.3.5.2 · 1 row entry · 4 columns
Uses the atto variant from /opt/observium/mibs/atto.
Command help
Walk trapClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATTO6500N-MIB' -M '/opt/observium/mibs/atto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATTO6500N-MIB::trapClientTable'
Stores a row for each IP address/port number configured to receive traps.
trapClientEntry row .1.3.6.1.4.1.4547.2.3.5.2.1
Ip/Port pair for a specific client.
Indexes
Column Syntax OID
trapClientIndexUsed to index a trap client in the trapClientTable.Integer32
Constraints:
range: 0-8
.1.3.6.1.4.1.4547.2.3.5.2.1.1
trapClientIpAddressThe IP address of a client registered for traps in
dotted notation.
OctetString
Constraints:
range: 0-48
.1.3.6.1.4.1.4547.2.3.5.2.1.2
trapClientPortThe UDP port to send traps for this trap client. Normally this
would be the standard trap port (162). This object is an index
and must be specified to create a row in this table.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.4547.2.3.5.2.1.3
trapClientFilterThis value defines the trap severity filter for this trap
host. The unit will send traps to this trap client that
have a severity level less than or equal to this value.
The default value of this object is 'warning'.
Enumeration
Enumerated Values:
1none
2critical
3warning
4informational
5all
.1.3.6.1.4.1.4547.2.3.5.2.1.4