ATSWTCH2-MIB Table View

A list of SNMP Trap Manager stations Entries.
The number of entries is given by the
switchNwMgrTotal mib object.

atswitchNwMgrEntry row .1.3.6.1.4.1.207.8.10.1.9.1.1

Trap receipt Manager Entry containing ipaddress of
the configured NMS's to which Traps are sent.

Indexes

atswitchNwMgrIndex

Column	Syntax	OID
atswitchNwMgrIndexmandatory The Index of the Managers Ip address.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.207.8.10.1.9.1.1.1
atswitchNwMgrIpAddrmandatory The IP Address of the NMS host configured.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.207.8.10.1.9.1.1.2

Table of basic port configuration information.

atswitchPortEntry row .1.3.6.1.4.1.207.8.10.3.1.1

An entry in the port config table.

Indexes

atswitchPortNumber

Column	Syntax	OID
atswitchPortNumbermandatory This object identifies the port of the switch.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.3.1.1.1
atswitchPortNamemandatory This attribute associates a user defined string name with the port.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.207.8.10.3.1.1.2
atswitchPortAutosenseOrHalfDuplexmandatory This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex	Enumerationr/w Enumerated Values: 1 portAutoSense 2 forceHalfDuplex	.1.3.6.1.4.1.207.8.10.3.1.1.3
atswitchPortLinkStatemandatory This attribute allows an administrative request to read the status of link state on this port.	Enumeration Enumerated Values: 1 online 2 offline	.1.3.6.1.4.1.207.8.10.3.1.1.4
atswitchPortDuplexStatusmandatory This attribute allows an administrative request to read the status of Duplex on this port.	Enumeration Enumerated Values: 1 fullDuplex 2 halfDuplex	.1.3.6.1.4.1.207.8.10.3.1.1.5
atswitchPortSpeedmandatory This attribute allows an administrative request to read/write the speed of this port. This attribure is read-only for all the Ports on AT-37XX product . This Attribute is read-write for ATS21 (AT81XX) product Only.…	Enumerationr/w Enumerated Values: 1 tenMBits 2 hundredMBits	.1.3.6.1.4.1.207.8.10.3.1.1.6
atswitchPortStatemandatory This attribute allows an administrative request to disable or enable communications on this port.It also responds with the status of the port .Except enabled(1) and disabled(2), all values are read-only status.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 blocking 4 listening 5 learning	.1.3.6.1.4.1.207.8.10.3.1.1.7
atswitchPortTransmitPacingConfigmandatory This Object is supported on AT36XX product line Only. This attribute allows the transmit Pacing to be enabled or disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.207.8.10.3.1.1.8
atswitchPortSTPConfigmandatory This attribute allows a bridging Mode to be configured with either Spanning Tree enabled or disabled. When Spanning tree is enabled, make sure that this port is belonging to a valid Bridge_id. Spanning Tree is enabled o…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.207.8.10.3.1.1.9
atswitchPortBridgeidmandatory The Bridge to which this port belongs to .	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.207.8.10.3.1.1.10
atswitchPortSTPCostmandatory The Cost of the Spanning Tree Protocol.This object is valid only when STP is enabled.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.207.8.10.3.1.1.11
atswitchPortSTPPrioritymandatory The Priority of the spanning Tree Protocol. This object is valid when STP is enabled.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.207.8.10.3.1.1.12
atswitchPortSwitchingTypemandatory This per-port attribute describes whether the port identified by atswitchPortNumber uses store-and-forward bridging for local switched Ethernet packets or cut-through. The Hardware allows cut-through on Transmission a…	Enumerationr/w Enumerated Values: 1 fast-cut-through 2 store-and-forward	.1.3.6.1.4.1.207.8.10.3.1.1.13
atswitchPortFlowControlEnableobsolete This Per_port attribute is only for ATS21 product.(81XX). This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and Aut…	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.207.8.10.3.1.1.14
atswitchPortSecurityNumberOfAddressesmandatory This object configures the Max number of addresses at an instance to be learnt by the device. If the learnt addresses number is above this number, then the atswitchSecurityAction is triggered . when the number of learnt…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.3.1.1.15

Table of Virtual LAN configured.

atswitchBasicVlanEntry row .1.3.6.1.4.1.207.8.10.4.1.1

An entry in the table, containing VLAN information.

Indexes

atswitchBeVlanIndex

Column	Syntax	OID
atswitchBeVlanIndexmandatory This object identifies the VLAN.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.207.8.10.4.1.1.1
atswitchBeVlanNamemandatory This attribute associates a user defined string with the Virtual LAN. To configure a new VLAN, do 'set' operation on this object with the VLAN name. To delete an VLAN, do 'set' operation with string '*'. Before confi…	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.207.8.10.4.1.1.2
atswitchBeVlanTagIdmandatory This object is supported by 37xx series of fenix with the VLAN tagging capability hardware only. Please check whether the SysObjectId is greater than 29. This object configures the VId in the Tag Informa…	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.207.8.10.4.1.1.3
atswitchBeVlanPortMaskmandatory This object is supported by 37xx series of fenix with the VLAN tagging capability hardware only. Please check whether the SysObjectId is greater than 29. This Object builds the Output Ports that particip…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.207.8.10.4.1.1.4
atswitchBeVlanRowStatusmandatory This object is supported by 37xx series of fenix with the VLAN tagging capability hardware only. Please check whether the SysObjectId is greater than 29. This object identifies the atswitchBeVLANEntry Ro…	Enumerationr/w Enumerated Values: 1 idle 2 operational 3 under-construction 4 not-operational	.1.3.6.1.4.1.207.8.10.4.1.1.5

Table of per port Virtual LAN configuration.

atswitchPort2VlanEntry row .1.3.6.1.4.1.207.8.10.4.2.1

An entry in the table, containing per port VLAN information.

Indexes

atswitchPvPortNumber

Column	Syntax	OID
atswitchPvPortNumbermandatory This object identifies the port on the switch.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.4.2.1.1
atswitchPvVlanNamemandatory This attribute associates a user defined string with the Virtual LAN. This Object is the same as atswitchBeVlanName. Please make sure to give the same string as atswitchBeVlanName.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.207.8.10.4.2.1.2

A list of statistics entries.

atswitchEthPortMonEntry row .1.3.6.1.4.1.207.8.10.6.1.1.1

A collection of statistics kept for a particular port.

Indexes

atswitchEthPortMonId

Column	Syntax	OID
atswitchEthPortMonIdmandatory The relative position of a port within a switch starting with 1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.6.1.1.1.1
atswitchEthPortMonTxTotalBytesmandatory The total number of Bytes transmited to this port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.2
atswitchRxGoodFramesmandatory The total number of good packets(including unicast,broadcast packets and multicast packets) received	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.3
atswitchTxGoodFramesmandatory The total number of good packets(including bad packets, broadcast packets and multicast packets) transmitted successfully	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.4
atswitchTxBroadcastFramesmandatory The total number of packets transmitted that were directed to the broadcast address. This does not include multicast packets	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.5
atswitchTxMulticastFramesmandatory The total number of packets transmitted that were directed to a multicast address. This does not include packets addressed to the broadcast address	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.6
atswitchAddrDuplicatemandatory The number of address duplications seen on this port which is secured on another port. If a source address is locked for a port and if that address is eeen as source address on this port, then such occurances of dupl…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.7
atswitchAddrMismatchesmandatory Address mismatches /address changes the sum of : 1. The number of mismatches seen on a port between a securely assigned port address and the source address observed on the port. Occurrence of this causes…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.8
atswitchRxOverrunsmandatory The number of frames lost due to lack of resources during frame reception. The counter is incremented when frame data cannot enter the RX fifo for whatever reason. Frames that overrun after entering the fifo also can be…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.1.1.1.9

A list of statistics entries.

atswitchEthPortErrorEntry row .1.3.6.1.4.1.207.8.10.6.2.1.1

A collection of statistics kept for a particular port.

Indexes

atswitchEthPortErrorId

Column	Syntax	OID
atswitchEthPortErrorIdmandatory The relative position of a port within a switch starting with 1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.6.2.1.1.1
atswitchEthPortErrorRxBadFramesmandatory The counter is incremented when a bad frame was received on this port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.2.1.1.2
atswitchEthPortErrorTxTotalmandatory Total number of error resulted from transmit operations on this port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.6.2.1.1.3

This tables lists Mac Addresses lexicographically from the forwarding table and also the information about the Vlan/Vlan which this MAC address belongs to.

atswitchFwdVlanEntry row .1.3.6.1.4.1.207.8.10.7.1.1

Entry in the atswitchFwdVlanTable.

Indexes

atswitchFwdVlanMACAddr

Column	Syntax	OID
atswitchFwdVlanMACAddrmandatory This object identifies the MAC Address associated with this entry.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.207.8.10.7.1.1.1
atswitchFwdVlanVlanIdmandatory This object identifies the Vlan/Vlan which MAC Address defined by the atswitchFwdMACAddr is associated with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.7.1.1.2
atswitchFwdVlanAgemandatory Current Age of the MACAddr in the Forwarding Table.It Starts with 0 and if not heard it increments to some value until it hears from it and if not heard before reaching Max value, it will purge this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.7.1.1.3
atswitchFwdVlanStatusmandatory The status of this entry. The meanings of the values are: inactive(1) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been …	Enumeration Enumerated Values: 1 inactive 2 active 3 other	.1.3.6.1.4.1.207.8.10.7.1.1.4
atswitchFwdVlanPortmandatory Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of atswitchFwdVlanMACAddr has been seen. A value of '0' indicates that the …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.7.1.1.5

Table of basic bridge information.

atswitchBrBaseEntry row .1.3.6.1.4.1.207.8.10.9.1.1.1

An entry in the atswitchBrBaseTable.

Indexes

atswitchBrBaseLanId

Column	Syntax	OID
atswitchBrBaseLanIdmandatory This object uniquely identifies the lan or Virtual lan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.1.1.1.1
atswitchBrBaseBridgeAddressmandatory The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only req…	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.207.8.10.9.1.1.1.2
atswitchBrBaseNumPortsmandatory The number of ports controlled by this bridging entity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.1.1.1.3
atswitchBrBaseTypemandatory Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.	Enumeration Enumerated Values: 1 unknown 2 transparent-only 3 sourceroute-only 4 srt	.1.3.6.1.4.1.207.8.10.9.1.1.1.4

A table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included.

atswitchBrBasePortEntry row .1.3.6.1.4.1.207.8.10.9.1.4.1

A list of information for each port of the
bridge.

Indexes

atswitchBrBasePortLanId atswitchBrBasePort

Column	Syntax	OID
atswitchBrBasePortLanIdmandatory This object uniquely identifies the lan or Virtual lan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.1.4.1.1
atswitchBrBasePortmandatory The port number of the port for which this entry contains bridge management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.207.8.10.9.1.4.1.2
atswitchBrBasePortIfIndexmandatory The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.1.4.1.3
atswitchBrBasePortCircuitmandatory For a port which (potentially) has the same value of atswitchBrBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where…	ObjectIdentifier	.1.3.6.1.4.1.207.8.10.9.1.4.1.4
atswitchBrBasePortDelayExceededDiscardsmandatory The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.1.4.1.5
atswitchBrBasePortMtuExceededDiscardsmandatory The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.1.4.1.6

Table of bridge spanning tree information.

atswitchBrStpEntry row .1.3.6.1.4.1.207.8.10.9.2.1.1

An entry in the atswitchBrStpTable.

Indexes

atswitchBrStpLanId

Column	Syntax	OID
atswitchBrStpLanIdmandatory This object uniquely identifies the lan or Virtual lan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.2.1.1.1
atswitchBrStpProtocolSpecificationmandatory An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If fut…	Enumeration Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d	.1.3.6.1.4.1.207.8.10.9.2.1.1.2
atswitchBrStpPrioritymandatory The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of atswitchBrBaseBridgeAddress.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.207.8.10.9.2.1.1.3
atswitchBrStpTimeSinceTopologyChangemandatory The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.2.1.1.4
atswitchBrStpTopChangesmandatory The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.2.1.1.5
atswitchBrStpDesignatedRootmandatory The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originat…	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.207.8.10.9.2.1.1.6
atswitchBrStpRootCostmandatory The cost of the path to the root as seen from this bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.2.1.1.7
atswitchBrStpRootPortmandatory The port number of the port which offers the lowest cost path from this bridge to the root bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.2.1.1.8
atswitchBrStpMaxAgemandatory The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	Timeout	.1.3.6.1.4.1.207.8.10.9.2.1.1.9
atswitchBrStpHelloTimemandatory The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	Timeout	.1.3.6.1.4.1.207.8.10.9.2.1.1.10
atswitchBrStpHoldTimemandatory This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.2.1.1.11
atswitchBrStpForwardDelaymandatory This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	Timeout	.1.3.6.1.4.1.207.8.10.9.2.1.1.12
atswitchBrStpBridgeMaxAgemandatory The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of atswitchBrStpBridgeHelloTime. The granulari…	Integer32r/w Constraints: range: 600-4000	.1.3.6.1.4.1.207.8.10.9.2.1.1.13
atswitchBrStpBridgeHelloTimemandatory The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempte…	Integer32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.207.8.10.9.2.1.1.14
atswitchBrStpBridgeForwardDelaymandatory The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of atswitchBrStpBridgeMaxAge. The granu…	Integer32r/w Constraints: range: 400-3000	.1.3.6.1.4.1.207.8.10.9.2.1.1.15

A table that contains port-specific information
for the Spanning Tree Protocol.

atswitchBrStpPortEntry row .1.3.6.1.4.1.207.8.10.9.2.15.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

atswitchBrStpPortLanId atswitchBrStpPort

Column	Syntax	OID
atswitchBrStpPortLanIdmandatory This object uniquely identifies the lan or Virtual lan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.2.15.1.1
atswitchBrStpPortmandatory The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.207.8.10.9.2.15.1.2
atswitchBrStpPortPrioritymandatory The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of atswitchBrStpPort.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.207.8.10.9.2.15.1.3
atswitchBrStpPortStatemandatory The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.207.8.10.9.2.15.1.4
atswitchBrStpPortEnablemandatory The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.207.8.10.9.2.15.1.5
atswitchBrStpPortPathCostmandatory The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.207.8.10.9.2.15.1.6
atswitchBrStpPortDesignatedRootmandatory The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.207.8.10.9.2.15.1.7
atswitchBrStpPortDesignatedCostmandatory The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.2.15.1.8
atswitchBrStpPortDesignatedBridgemandatory The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.207.8.10.9.2.15.1.9
atswitchBrStpPortDesignatedPortmandatory The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.207.8.10.9.2.15.1.10
atswitchBrStpPortForwardTransitionsmandatory The number of times this port has transitioned from the Learning state to the Forwarding state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.2.15.1.11

Table of transparent bridging information.

atswitchBrTpEntry row .1.3.6.1.4.1.207.8.10.9.3.1.1

An entry in the atswitchBrTpTable.

Indexes

atswitchBrTpLanId

Column	Syntax	OID
atswitchBrTpLanIdmandatory This object uniquely identifies the lan or Virtual lan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.3.1.1.1
atswitchBrTpLearnedEntryDiscardsmandatory The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it ind…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.3.1.1.2
atswitchBrTpAgingTimemandatory The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.	Integer32r/w Constraints: range: 10-1000000	.1.3.6.1.4.1.207.8.10.9.3.1.1.3

A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information.  This information is used
by the transparent bridging function in
determining how to propagate a received frame.

atswitchBrTpFdbEntry row .1.3.6.1.4.1.207.8.10.9.3.3.1

Information about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information.

Indexes

atswitchBrTpFdbLanId atswitchBrTpFdbAddress

Column	Syntax	OID
atswitchBrTpFdbLanIdmandatory This object uniquely identifies the lan or Virtual lan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.3.3.1.1
atswitchBrTpFdbAddressmandatory A unicast MAC address for which the bridge has forwarding and/or filtering information.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.207.8.10.9.3.3.1.2
atswitchBrTpFdbPortmandatory Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of atswitchBrTpFdbAddress has been seen. A value of '0' indicates that the …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.3.3.1.3
atswitchBrTpFdbStatusmandatory The status of this entry. The meanings of the values are: inactive(1) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been …	Enumeration Enumerated Values: 1 inactive 2 active 3 other	.1.3.6.1.4.1.207.8.10.9.3.3.1.4

A table that contains information about every
port that is associated with this transparent
bridge.

atswitchBrTpPortEntry row .1.3.6.1.4.1.207.8.10.9.3.4.1

A list of information for each port of a
transparent bridge.

Indexes

atswitchBrTpPortLanId atswitchBrTpPort

Column	Syntax	OID
atswitchBrTpPortLanIdmandatory This object uniquely identifies the lan or Virtual lan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.3.4.1.1
atswitchBrTpPortmandatory The port number of the port for which this entry contains Transparent bridging management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.207.8.10.9.3.4.1.2
atswitchBrTpPortMaxInfomandatory The maximum size of the INFO (non-MAC) field that this port will receive or transmit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.9.3.4.1.3
atswitchBrTpPortInFramesmandatory The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.3.4.1.4
atswitchBrTpPortOutFramesmandatory The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.3.4.1.5
atswitchBrTpPortInDiscardsmandatory Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.10.9.3.4.1.6

This tables lists Mac Addresses lexicographically from the Static 
table which binds MAC addresses to ports on the switch.

atswitchStaticMACEntry row .1.3.6.1.4.1.207.8.10.10.1.1

Entry in the atswitchStaticMACTable.

Indexes

atswitchStaticMACAddress

Column	Syntax	OID
atswitchStaticMACAddressmandatory This object identifies the MAC Address associated with Static MAC Table.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.207.8.10.10.1.1.1
atswitchStaticMACPortNumbersmandatory This object identifies the Ports for which the above MAC address is associated Statically in Static MAC Table. This Object could take the port numbers as the Static Address added can be Multicast addresses. This Obj…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.207.8.10.10.1.1.2
atswitchStaticMACVlanmandatory The Static MAC Address to be added can also be confined to a Vlan also. If the Port does not belong to that Vlan. the Port is forced to be moved to that Vlan.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.10.1.1.3

A table that contains information about unicast
entries seen on ports.

atswitchPortMACEntry row .1.3.6.1.4.1.207.8.10.12.1.1

Information about a specific unicast MAC address
seen on ports.

Indexes

atswitchPortMACAddress atswitchPortMACPort

Column	Syntax	OID
atswitchPortMACAddressmandatory A unicast MAC address seen on this port.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.207.8.10.12.1.1.1
atswitchPortMACPortmandatory This object identifies the port on which the atswitchPortMACAddress was seen.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.12.1.1.2

Dont care.

atswitchMallocLogEntry row .1.3.6.1.4.1.207.8.10.13.1.1

Entry in the atswitchDebugMallocLogEntry.

Indexes

atswitchDebugMallocLogIndex

Column	Syntax	OID
atswitchDebugMallocLogIndexobsolete This is strictly for Debug reason and this object should not be beleived as the correct number. This log is useful for finding the memory leak which is stored in Leak_Table. The Entry of this table is the address where…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.13.1.1.1
atswitchDebugMallocLogCallerobsolete This is strictly for Debug reason and this object should not be beleived as the correct number. This log is useful for finding the memory leak which is stored in Leak_Table. The Entry of this table is the caller addres…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.13.1.1.2
atswitchDebugMallocLogAddressobsolete This is strictly for Debug reason and this object should not be beleived as the correct number. This log is useful for finding the memory leak which is stored in Leak_Table. The Entry of this table is the address where…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.10.13.1.1.3