ATMEDIA-MIB Table View

A list of physical ATMedia Encryptor interfaces.  
The number of entries is given by the value 
of acsIfNumber.

acIfEntry row .1.3.6.1.4.1.13458.1.3.3.2.1

An entry containing management information
applicable to a particular physical interface.

Indexes

acIfIndex

Column	Syntax	OID
acIfIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.3.3.2.1.1
acIfDescr Description of the physical interface.	DisplayString	.1.3.6.1.4.1.13458.1.3.3.2.1.2
acIfPhyType Type of the physical interface.	Enumeration Enumerated Values: 0 other 1 sonet 2 e3 3 ds3 4 e1 5 ds1 6 gigabit 7 sonetlink 8 fibrechannel 9 ethernet	.1.3.6.1.4.1.13458.1.3.3.2.1.3
acIfSpeed Speed of the physical interface in bps.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13458.1.3.3.2.1.4
acIfRevision Revision of the physical interface.	DisplayString	.1.3.6.1.4.1.13458.1.3.3.2.1.5

A list of ATMedia encryptor engines. The number 
of entries is given by the value of acsEcNumber.

acEcEntry row .1.3.6.1.4.1.13458.1.3.4.2.1

An entry containing management information
applicable to a particular encryptor engine.

Indexes

acEcIndex

Column	Syntax	OID
acEcIndex A unique value, greater than zero, for each encryptor engine. It is recommended that values are assigned contiguously starting from 1. The value for each encryptor must remain constant at least from one re-initializat…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.3.4.2.1.1
acEcDescr Description of the encryptor engine.	DisplayString	.1.3.6.1.4.1.13458.1.3.4.2.1.2
acEcRevision Revision of the encryptor engine.	DisplayString	.1.3.6.1.4.1.13458.1.3.4.2.1.3

A list of interface cell counter informations. The number
of entries is given by the value of acInferfaceStatusNumber.

acInterfaceStatusEntry row .1.3.6.1.4.1.13458.1.4.1.2.1

An entry containing alarm informations applicable
to a particular physical interface.

Indexes

acInterfaceStatusIndex

Column	Syntax	OID
acInterfaceStatusIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.4.1.2.1.1
acInterfaceStatusState The current operational state of the interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.13458.1.4.1.2.1.2
acInterfaceStatusLastChange The value of sysUpTime at the time the interface entered its current operational state.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13458.1.4.1.2.1.3
acInterfaceStatusDescr Description of the encryptor engine status.	DisplayString	.1.3.6.1.4.1.13458.1.4.1.2.1.4
acInterfaceStatusRxCells Number of cells received by the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.4.1.2.1.5
acInterfaceStatusTxCells Number of cells sent by the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.4.1.2.1.6
acInterfaceStatusRxBytes Number of bytes received by the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.4.1.2.1.7
acInterfaceStatusTxBytes Number of bytes sent by the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.4.1.2.1.8
acInterfaceStatusRxRate Data rate with which cells are received by the physical interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13458.1.4.1.2.1.9
acInterfaceStatusTxRate Data rate with which cells are sent by the physical interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13458.1.4.1.2.1.10

A list of ATMedia encryptor engine status
informations. The number of entries is given
by the value of acsEcstatNumber.

acEncryptorStatusEntry row .1.3.6.1.4.1.13458.1.4.2.2.1

An entry containing status information
applicable to a particular encryptor engine.

Indexes

acEncryptorStatusIndex

Column	Syntax	OID
acEncryptorStatusIndex A unique value, greater than zero, for each encryptor engine. It is recommended that values are assigned contiguously starting from 1. The value for each encryptor must remain constant at least from one re-initializat…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.4.2.2.1.1
acEncryptorStatusState Status of the encryptor engine. Since version 2.1 all encryptors will distinguish between crypt (running) and plaintext mode	Enumeration Enumerated Values: 1 up 2 down 3 plain	.1.3.6.1.4.1.13458.1.4.2.2.1.2
acEncryptorStatusLastChange The value of sysUpTime at the time the encryptor entered its current operational state.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13458.1.4.2.2.1.3
acEncryptorStatusDescr Description of the encryptor engine status.	DisplayString	.1.3.6.1.4.1.13458.1.4.2.2.1.4

A list of physical Sonet interface status
informations. The number of entries is given by
the value of acsIfstatNumber.

acSonetStatusEntry row .1.3.6.1.4.1.13458.1.6.1.1.2.1

An entry containing status information
applicable to a particular Sonet physical interface.

Indexes

acSonetStatusIndex

Column	Syntax	OID
acSonetStatusIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.1.1.2.1.1
acSonetStatusState Status of the physical Sonet interface.	Enumeration Enumerated Values: 1 up 2 down 3 failure	.1.3.6.1.4.1.13458.1.6.1.1.2.1.2
acSonetStatusLOS Alarm condition of type LOS at the physical Sonet interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.1.1.2.1.3
acSonetStatusOOF Alarm condition of type OOF at the physical Sonet interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.1.1.2.1.4
acSonetStatusLOC Alarm condition of type LOC at the physical Sonet interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.1.1.2.1.5
acSonetStatusLineAIS Alarm condition of type LineAIS at the physical Sonet interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.1.1.2.1.6
acSonetStatusLineRDI Alarm condition of type LineRDI at the physical Sonet interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.1.1.2.1.7
acSonetStatusPathAIS Alarm condition of type PathAIS at the physical Sonet interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.1.1.2.1.8
acSonetStatusPathYellow Alarm condition of type PathYellow at the physical Sonet interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.1.1.2.1.9
acSonetStatusCustom Numerical status information of the physical Sonet interface. The AcSonetStatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various bit pos…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.1.1.2.1.10
acSonetStatusDescr Textual description of the status of the physical Sonet interface.	DisplayString	.1.3.6.1.4.1.13458.1.6.1.1.2.1.11

A list of Sonet interface alarm informations. The number
of entries is given by the value of acSonetAlarmsNumber.

acSonetAlarmsEntry row .1.3.6.1.4.1.13458.1.6.1.2.2.1

An entry containing alarm informations applicable
to a particular physical Sonet interface.

Indexes

acSonetAlarmsIndex

Column	Syntax	OID
acSonetAlarmsIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.1.2.2.1.1
acSonetAlarmsLOS Number of alarm conditions of type LOS at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.2.2.1.2
acSonetAlarmsLineAIS Number of alarm conditions of type LineAIS at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.2.2.1.3
acSonetAlarmsLineRDI Number of alarm conditions of type LineRDI at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.2.2.1.4
acSonetAlarmsPathAIS Number of alarm conditions of type PathAIS at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.2.2.1.5
acSonetAlarmsPathYellow Number of alarm conditions of type PathYellow at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.2.2.1.6

A list of Sonet interface alarm informations. The number
of entries is given by the value of acSonetErrCounterNumber.

acSonetErrCounterEntry row .1.3.6.1.4.1.13458.1.6.1.3.2.1

An entry containing alarm informations applicable
to a particular physical Sonet interface.

Indexes

acSonetErrCounterIndex

Column	Syntax	OID
acSonetErrCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.1.3.2.1.1
acSonetErrCounterOOF Number of error conditions of type OOF at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.2
acSonetErrCounterLOC Number of error conditions of type LOC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.3
acSonetErrCounterB1BIP Number of error conditions of type B1BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.4
acSonetErrCounterB2BIP Number of error conditions of type B2BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.5
acSonetErrCounterB3BIP Number of error conditions of type B3BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.6
acSonetErrCounterLineFEBE Number of error conditions of type LineFEBE at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.7
acSonetErrCounterPathFEBE Number of error conditions of type PathFEBE at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.8
acSonetErrCounterHEC Number of error conditions of type HEC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.3.2.1.9

A list of Sonet interface alarm informations. The number
of entries is given by the value of acSonetEtsCounterNumber.

acSonetEtsCounterEntry row .1.3.6.1.4.1.13458.1.6.1.4.2.1

An entry containing alarm informations applicable
to a particular physical Sonet interface.

Indexes

acSonetEtsCounterIndex

Column	Syntax	OID
acSonetEtsCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.1.4.2.1.1
acSonetEtsCounterOOF Number of error conditions of type OOF at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.2
acSonetEtsCounterLOC Number of error conditions of type LOC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.3
acSonetEtsCounterB1BIP Number of error conditions of type B1BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.4
acSonetEtsCounterB2BIP Number of error conditions of type B2BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.5
acSonetEtsCounterB3BIP Number of error conditions of type B3BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.6
acSonetEtsCounterLineFEBE Number of error conditions of type LineFEBE at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.7
acSonetEtsCounterPathFEBE Number of error conditions of type PathFEBE at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.8
acSonetEtsCounterHEC Number of error conditions of type HEC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.1.4.2.1.9

A list of physical E3 interface status
informations. The number of entries is given by
the value of acE3StatusNumber.

acE3StatusEntry row .1.3.6.1.4.1.13458.1.6.2.1.2.1

An entry containing status information
applicable to a particular E3 physical interface.

Indexes

acE3StatusIndex

Column	Syntax	OID
acE3StatusIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.2.1.2.1.1
acE3StatusState Status of the physical E3 interface.	Enumeration Enumerated Values: 1 up 2 down 3 failure	.1.3.6.1.4.1.13458.1.6.2.1.2.1.2
acE3StatusLOS Alarm condition of type LOS at the physical E3 interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.2.1.2.1.3
acE3StatusOOF Alarm condition of type OOF at the physical E3 interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.2.1.2.1.4
acE3StatusLOC Alarm condition of type LOC at the physical E3 interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.2.1.2.1.5
acE3StatusAIS Alarm condition of type AIS at the physical E3 interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.2.1.2.1.6
acE3StatusMAFERF Alarm condition of type MAFERF at the physical E3 interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.2.1.2.1.7
acE3StatusCustom Numerical status information of the physical E3 interface. The AcE3StatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various bit positions…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.2.1.2.1.8
acE3StatusDescr Textual description of the status of the physical E3 interface.	DisplayString	.1.3.6.1.4.1.13458.1.6.2.1.2.1.9

A list of E3 interface alarm informations. The number
of entries is given by the value of acE3AlarmsNumber.

acE3AlarmsEntry row .1.3.6.1.4.1.13458.1.6.2.2.2.1

An entry containing alarm informations applicable
to a particular physical E3 interface.

Indexes

acE3AlarmsIndex

Column	Syntax	OID
acE3AlarmsIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.2.2.2.1.1
acE3AlarmsLOS Number of alarm conditions of type LOS at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.2.2.1.2
acE3AlarmsAIS Number of alarm conditions of type AIS at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.2.2.1.3
acE3AlarmsMAFERF Number of alarm conditions of type MAFERF at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.2.2.1.4

A list of E3 interface alarm informations. The number
of entries is given by the value of acE3ErrCounterNumber.

acE3ErrCounterEntry row .1.3.6.1.4.1.13458.1.6.2.3.2.1

An entry containing alarm informations applicable
to a particular physical E3 interface.

Indexes

acE3ErrCounterIndex

Column	Syntax	OID
acE3ErrCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.2.3.2.1.1
acE3ErrCounterLCV Number of error conditions of type LCV at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.3.2.1.2
acE3ErrCounterOOF Number of error conditions of type OOF at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.3.2.1.3
acE3ErrCounterLOC Number of error conditions of type LOC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.3.2.1.4
acE3ErrCounterBIP Number of error conditions of type B1BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.3.2.1.5
acE3ErrCounterMAFEBE Number of error conditions of type MAFEBE at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.3.2.1.6
acE3ErrCounterHEC Number of error conditions of type HEC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.3.2.1.7

A list of E3 interface alarm informations. The number
of entries is given by the value of acE3EtsCounterNumber.

acE3EtsCounterEntry row .1.3.6.1.4.1.13458.1.6.2.4.2.1

An entry containing alarm informations applicable
to a particular physical E3 interface.

Indexes

acE3EtsCounterIndex

Column	Syntax	OID
acE3EtsCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.2.4.2.1.1
acE3EtsCounterLCV Number of error conditions of type LCV at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.4.2.1.2
acE3EtsCounterOOF Number of error conditions of type OOF at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.4.2.1.3
acE3EtsCounterLOC Number of error conditions of type LOC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.4.2.1.4
acE3EtsCounterBIP Number of error conditions of type B1BIP at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.4.2.1.5
acE3EtsCounterMAFEBE Number of error conditions of type MAFEBE at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.4.2.1.6
acE3EtsCounterHEC Number of error conditions of type HEC at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.2.4.2.1.7

A list of physical Gigabit interface status
informations. The number of entries is given by
the value of acsGigabitStatusNumber.

acGigabitStatusEntry row .1.3.6.1.4.1.13458.1.6.4.1.2.1

An entry containing status information
applicable to a particular Gigabit physical interface.

Indexes

acGigabitStatusIndex

Column	Syntax	OID
acGigabitStatusIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.4.1.2.1.1
acGigabitStatusState Status of the physical Gigabit interface.	Enumeration Enumerated Values: 1 up 2 down 3 failure	.1.3.6.1.4.1.13458.1.6.4.1.2.1.2
acGigabitStatusLOS Alarm condition of type LOS at the physical Gigabit interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.4.1.2.1.3
acGigabitStatusLossofSync Alarm condition of type LossofSync at the physical Gigabit interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.4.1.2.1.4
acGigabitStatusLinkDown Alarm condition of type LinkDown at the physical Gigabit interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.4.1.2.1.5
acGigabitStatusCustom Numerical status information of the physical Gigabit interface. The AcSonetStatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various bit p…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.4.1.2.1.6
acGigabitStatusDescr Textual description of the status of the physical Gigabit interface.	DisplayString	.1.3.6.1.4.1.13458.1.6.4.1.2.1.7

A list of Gigabit interface alarm informations. The number
of entries is given by the value of acGigabitAlarmsNumber.

acGigabitAlarmsEntry row .1.3.6.1.4.1.13458.1.6.4.2.2.1

An entry containing alarm informations applicable
to a particular physical Gigabit interface.

Indexes

acGigabitAlarmsIndex

Column	Syntax	OID
acGigabitAlarmsIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.4.2.2.1.1
acGigabitAlarmsLOS Number of alarm conditions of type LOS at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.2.2.1.2
acGigabitAlarmsLinkDown Number of alarm conditions of type LinkDown at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.2.2.1.3

A list of Gigabit interface alarm informations. The number
of entries is given by the value of acGigabitErrCounterNumber.

acGigabitErrCounterEntry row .1.3.6.1.4.1.13458.1.6.4.3.2.1

An entry containing alarm informations applicable
to a particular physical Gigabit interface.

Indexes

acGigabitErrCounterIndex

Column	Syntax	OID
acGigabitErrCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.4.3.2.1.1
acGigabitErrCounterTotalFrame Number of total frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.3.2.1.2
acGigabitErrCounterErroredFrame Number of errored frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.3.2.1.3
acGigabitErrCounterFalseCarrier Number of error conditions of type FalseCarrier at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.3.2.1.4
acGigabitErrCounterLossofSync Number of error conditions of type LossofSync at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.3.2.1.5
acGigabitErrCounterLineError Number of error conditions of type LineError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.3.2.1.6

A list of Gigabit interface alarm informations. The number
of entries is given by the value of acGigabitEtsCounterNumber.

acGigabitEtsCounterEntry row .1.3.6.1.4.1.13458.1.6.4.4.2.1

An entry containing alarm informations applicable
to a particular physical Gigabit interface.

Indexes

acGigabitEtsCounterIndex

Column	Syntax	OID
acGigabitEtsCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.4.4.2.1.1
acGigabitEtsCounterTotalFrame not defined.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.4.2.1.2
acGigabitEtsCounterErroredFrame Number of errored frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.4.2.1.3
acGigabitEtsCounterFalseCarrier Number of error conditions of type FalseCarrier at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.4.2.1.4
acGigabitEtsCounterLossofSync Number of error conditions of type LossofSync at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.4.2.1.5
acGigabitEtsCounterLineError Number of error conditions of type LineError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.4.4.2.1.6

A list of physical Fibrechannel interface status
informations. The number of entries is given by
the value of acsFibrechannelStatusNumber.

acFibrechannelStatusEntry row .1.3.6.1.4.1.13458.1.6.5.1.2.1

An entry containing status information
applicable to a particular Fibrechannel physical interface.

Indexes

acFibrechannelStatusIndex

Column	Syntax	OID
acFibrechannelStatusIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.5.1.2.1.1
acFibrechannelStatusState Status of the physical Fibrechannel interface.	Enumeration Enumerated Values: 1 up 2 down 3 failure	.1.3.6.1.4.1.13458.1.6.5.1.2.1.2
acFibrechannelStatusLOS Alarm condition of type LOS at the physical Fibrechannel interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.5.1.2.1.3
acFibrechannelStatusLossofSync Alarm condition of type LossofSync at the physical Fibrechannel interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.5.1.2.1.4
acFibrechannelStatusLinkDown Alarm condition of type LinkDown at the physical Fibrechannel interface.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.13458.1.6.5.1.2.1.5
acFibrechannelStatusCustom Numerical status information of the physical Fibrechannel interface. The AcSonetStatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.5.1.2.1.6
acFibrechannelStatusDescr Textual description of the status of the physical Fibrechannel interface.	DisplayString	.1.3.6.1.4.1.13458.1.6.5.1.2.1.7

A list of Fibrechannel interface alarm informations. The number
of entries is given by the value of acFibrechannelAlarmsNumber.

acFibrechannelAlarmsEntry row .1.3.6.1.4.1.13458.1.6.5.2.2.1

An entry containing alarm informations applicable
to a particular physical Fibrechannel interface.

Indexes

acFibrechannelAlarmsIndex

Column	Syntax	OID
acFibrechannelAlarmsIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.5.2.2.1.1
acFibrechannelAlarmsLOS Number of alarm conditions of type LOS at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.2.2.1.2
acFibrechannelAlarmsLinkDown Number of alarm conditions of type LinkDown at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.2.2.1.3

A list of Fibrechannel interface alarm informations. The number
of entries is given by the value of acFibrechannelErrCounterNumber.

acFibrechannelErrCounterEntry row .1.3.6.1.4.1.13458.1.6.5.3.2.1

An entry containing alarm informations applicable
to a particular physical Fibrechannel interface.

Indexes

acFibrechannelErrCounterIndex

Column	Syntax	OID
acFibrechannelErrCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.5.3.2.1.1
acFibrechannelErrCounterTotalFrame Number of total frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.3.2.1.2
acFibrechannelErrCounterErroredFrame Number of errored frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.3.2.1.3
acFibrechannelErrCounterDiscardFrame Number of discarded frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.3.2.1.4
acFibrechannelErrCounterLossofSync Number of error conditions of type LossofSync at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.3.2.1.5
acFibrechannelErrCounterLineError Number of error conditions of type LineError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.3.2.1.6
acFibrechannelErrCounterFCSError Number of error conditions of type FCSError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.3.2.1.7
acFibrechannelErrCounterCheckError Number of error conditions of type CheckError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.3.2.1.8

A list of Fibrechannel interface alarm informations. The number
of entries is given by the value of acFibrechannelEtsCounterNumber.

acFibrechannelEtsCounterEntry row .1.3.6.1.4.1.13458.1.6.5.4.2.1

An entry containing alarm informations applicable
to a particular physical Fibrechannel interface.

Indexes

acFibrechannelEtsCounterIndex

Column	Syntax	OID
acFibrechannelEtsCounterIndex A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initializ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13458.1.6.5.4.2.1.1
acFibrechannelEtsCounterTotalFrame not defined.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.4.2.1.2
acFibrechannelEtsCounterErroredFrame Number of errored frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.4.2.1.3
acFibrechannelEtsCounterDiscardFrame Number of discarded frames at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.4.2.1.4
acFibrechannelEtsCounterLossofSync Number of error conditions of type LossofSync at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.4.2.1.5
acFibrechannelEtsCounterLineError Number of error conditions of type LineError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.4.2.1.6
acFibrechannelEtsCounterFCSError Number of error conditions of type FCSError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.4.2.1.7
acFibrechannelEtsCounterCheckError Number of error conditions of type CheckError at the physical interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.13458.1.6.5.4.2.1.8