AT-SYSINFO-MIB Table View

The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table
represents the status of one of the power supplies in AT8948 system.
Each power supply has its own board ID.

fanAndPsPsuStatusEntry row .1.3.6.1.4.1.207.8.4.4.3.1.11.1

A single entry of AT8948 fanAndPsPsuStatusTable, indexed by
fanAndPsPsuNumber field.

Indexes

No indexes recorded

Column	Syntax	OID
fanAndPsPsuNumber The PSU board identity for which this entry holds. If the system consists only of a single PSU board, only one entry will appear in the table, whose index is 1.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.1.11.1.1
fanAndPsPsuPresent The PSU present state, displayed as 'yes' if present, or 'no' if absent.	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.1.11.1.2
fanAndPsPsuType The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT.	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.1.11.1.3
fanAndPsPsuFan The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT.	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.1.11.1.4
fanAndPsPsuTemperature The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT, or NOT SUPPORTED.	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.1.11.1.5
fanAndPsPsuPower The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT or NOT SUPPORTED.	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.1.11.1.6

A list of stack members. For a chassis switch, this is a list
of cards.

cpuUtilisationStackEntry row .1.3.6.1.4.1.207.8.4.4.3.3.8.1

A set of parameters that describe the CPU utilisation of a
stack member. For a chassis switch, it corresponds to the CPU
utilisation of a card.

Indexes

No indexes recorded

Column	Syntax	OID
cpuUtilisationStackId Stack member ID. For a chassis switch, it corresponds to the card ID. For VCStack Plus, 1-12 refers to the cards on VCS stack member 1 and 13-24 refers to the cards on VCS stack member 2. Refer to chassisMappingTable fo…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.1
cpuUtilisationStackMax Maximum CPU utilisation since the router was last restarted. Expressed as a percentage.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.2
cpuUtilisationStackAvg Average CPU utilisation since the router was last restarted. Expressed as a percentage.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.3
cpuUtilisationStackAvgLastMinute Average CPU utilisation over the past minute. Expressed as a percentage.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.4
cpuUtilisationStackAvgLast10Seconds Average CPU utilisation over the past ten seconds. Expressed as a percentage.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.5
cpuUtilisationStackAvgLastSecond Average CPU utilisation over the past second. Expressed as a percentage.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.6
cpuUtilisationStackMaxLast5Minutes Maximum CPU utilisation over the last 5 minutes. Expressed as a percentage.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.7
cpuUtilisationStackAvgLast5Minutes Average CPU utilisation over the past 5 minutes. Expressed as a percentage.	Integer32	.1.3.6.1.4.1.207.8.4.4.3.3.8.1.8

The table of SwitchBlade sysTemperature. Each entry in the table
represents temperature monitoring from one of the CPU cards which
may be present in the SwitchBlade system.

sbTempEntry row .1.3.6.1.4.1.207.8.4.4.3.4.2.1.1

A single entry of SwitchBlade sysTemperature

Indexes

No indexes recorded

Column	Syntax	OID
sbTempIndex The board for which this temperature entry holds. If the system consists only of a single CPU board, only one entry will appear in the table, whose index is master(1).	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.1
sbTempActualTemperature The actual SwitchBlade temperature. This temperature is measured within the SwitchBlade CPU, and is sampled at 1 second intervals.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.2
sbTempFixedThresholdStatus The temperature status with regard to the fixed temperature threshold. The value of the fixed temperature threshold is set at 90 degrees C. This variable represents whether the actual temperature is above the threshold …	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.3
sbTempSettableThresholdStatus The temperature status with regard to the settable temperature threshold. The value of the settable temperature threshold is set by management intervention. This variable represents whether the actual temperature is abo…	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.4
sbTempSettableThreshold The value of the settable temperature threshold. This can be set independently for each temperature entry. The value of this threshold is only valid when sbTempSettableThresholdStatus is not set to undefined(3).	Integer32r/w	.1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.5

A table of information about the transceiver of a interface.

atPortInfoTransceiverEntry row .1.3.6.1.4.1.207.8.4.4.3.14.1.1

The description, the transceiver type of a interface.

Indexes

No indexes recorded

Column	Syntax	OID
atPortInfoTransceiverifIndex The ifIndex for the interface represented by this entry of the interfaces table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.207.8.4.4.3.14.1.1.1
atPortInfoTransceiverType This object indicates the type of transceiver on a interface.	Enumeration	.1.3.6.1.4.1.207.8.4.4.3.14.1.1.2