AT-PING-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
10
pingTable
table
.1.3.6.1.4.1.207.8.4.4.4.58.1
·
1 row entry
·
10 columns
Uses the allied-old variant from
Command help
/opt/observium/mibs/allied-old.
Walk pingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-PING-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-PING-MIB::pingTable'
The table of ping parameters, dynamic and static.
A single entry of ping parameters. This contains the
parameters required to perform a ping from the router.
The ping specified by the dynamic parameters, can be
initiated or stopped at any time by altering the pingStat…
parameters required to perform a ping from the router.
The ping specified by the dynamic parameters, can be
initiated or stopped at any time by altering the pingStat…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
There are two sets of ping information, dynamic and static.
The dynamic information is used only once, for the next ping, then automatically replaced with the static information. The static information is used whenever… |
Enumeration | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.1 |
||||
|
The protocol that the ping will use. The protocol must
match the destination address. Ping supports both IP, IPX, Appletalk, and OSI addresses. The protocol must be specified before the address is set, because when th… |
Enumerationr/w | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.2 |
||||
|
The address specifies the destination address for ping
packets for Appletalk, IP, IPX and OSI networks, respectively. The address format must match the protocol being used. The protocol must be specified before the addr… |
OctetStringr/w | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.3 |
||||
|
The number of ping packets to transmit.
|
Integer32r/w | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.4 |
||||
|
The packet size parameter specifies the length in bytes, of data
to include in the data portion of the ping packet. The protocol packet header size and the size of headers for the particular link protocol in use have t… |
Integer32r/w | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.5 |
||||
|
Timeout specifies the amount of time, in seconds, to wait for a response to a
ping packet. |
Integer32r/w | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.6 |
||||
|
The delay parameter specifies the time interval, in seconds, between
ping packets. |
Integer32r/w | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.7 |
||||
|
Specifies whether a trap should be issued on completion of the sequence
of pings. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.207.8.4.4.4.58.1.1.8 |
||||
|
The Type Of Service (TOS) parameter is only valid for IP addresses,
and specifies the TOS field in the IP header of the ping packet, as a decimal in the range 0 to 255. |
Integer32r/w | .1.3.6.1.4.1.207.8.4.4.4.58.1.1.9 |
||||
|
The pattern parameter specifies the data pattern to use in the
data portion of the ping packet. |
Unsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.207.8.4.4.4.58.1.1.10 |
