AT-ENVMONv2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
57

atEnvMonv2FanTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.1 · 1 row entry · 7 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2FanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2FanTable' 
A table of information about fans installed in the device
that have their fan speeds monitored by environment
monitoring hardware.
atEnvMonv2FanEntry row .1.3.6.1.4.1.207.8.4.4.3.12.1.1
The description, current speed, lower threshold speed and
current status of a fan.
Indexes
Column Syntax OID
atEnvMonv2FanStackMemberId
The index of the stack member hosting this fan. For a chassis
switch, it corresponds to the card ID of the controller that
is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack
Plus, the second chassis uses cont…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.1
atEnvMonv2FanBoardIndex
The index of the board hosting this fan in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.2
atEnvMonv2FanIndex
The numeric identifier of this fan on its host board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.3
atEnvMonv2FanDescription
The description of this fan.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.4
atEnvMonv2FanCurrentSpeed
The current speed of this fan in revolutions per
minute.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.5
atEnvMonv2FanLowerThreshold
The minimum acceptable speed of the fan in revolutions
per minute.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.6
atEnvMonv2FanStatus
An indication of whether this fan is currently in an
alarm condition. A value of 'failed(1)' indicates that its
current speed is too low, 'good(2)' indicates that the
current speed is acceptable.
Enumeration
Enumerated Values:
1failed
2good
 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.7

atEnvMonv2VoltageTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.2 · 1 row entry · 8 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2VoltageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2VoltageTable' 
A table of information about voltage rails in the device
that are monitored by environment monitoring hardware.
atEnvMonv2VoltageEntry row .1.3.6.1.4.1.207.8.4.4.3.12.2.1
The description, current value, upper & lower threshold
settings and current status of a voltage rail.
Indexes
Column Syntax OID
atEnvMonv2VoltageStackMemberId
The index of the stack member hosting this voltage sensor. For
a chassis switch, it corresponds to the card ID of the controller
that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack
Plus, the second chassi…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.1
atEnvMonv2VoltageBoardIndex
The index of the board hosting this voltage sensor in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.2
atEnvMonv2VoltageIndex
The numeric identifier of this voltage rail on its host board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.3
atEnvMonv2VoltageDescription
The description of this voltage rail.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.4
atEnvMonv2VoltageCurrent
The current reading of this voltage rail in millivolts.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.5
atEnvMonv2VoltageUpperThreshold
The maximum acceptable reading of this voltage rail in millivolts.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.6
atEnvMonv2VoltageLowerThreshold
The minimum acceptable reading of this voltage rail in millivolts.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.7
atEnvMonv2VoltageStatus
An indication of whether this voltage rail is currently
in an alarm condition. A value of 'outOfRange' indicates that
its current reading is outside its threshold range,
'inRange' indicates that the current reading is a…
Enumeration
Enumerated Values:
1outOfRange
2inRange
 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.8

atEnvMonv2TemperatureTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.3 · 1 row entry · 7 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2TemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2TemperatureTable' 
A table of information about temperature sensors in the device
that are monitored by environment monitoring hardware.
atEnvMonv2TemperatureEntry row .1.3.6.1.4.1.207.8.4.4.3.12.3.1
The description, current value, upper threshold setting
and current status of a temperature sensor.
Indexes
Column Syntax OID
atEnvMonv2TemperatureStackMemberId
The index of the stack member hosting this temperature sensor. For
a chassis switch, it corresponds to the card ID of the controller
that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack
Plus, the second ch…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.1
atEnvMonv2TemperatureBoardIndex
The index of the board hosting this temperature sensor in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.2
atEnvMonv2TemperatureIndex
The numeric identifier of this temperature sensor on its host board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.3
atEnvMonv2TemperatureDescription
The description of this temperature sensor.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.4
atEnvMonv2TemperatureCurrent
The current reading of this temperature sensor in tenths of a degree Celsius.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.5
atEnvMonv2TemperatureUpperThreshold
The maximum acceptable reading of this temperature
sensor in tenths of a degree Celsius.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.6
atEnvMonv2TemperatureStatus
An indication of whether this temperature sensor is
currently in an alarm condition. A value of 'outOfRange'
indicates that its current reading is outside its threshold
range, 'inRange' indicates that the current readin…
Enumeration
Enumerated Values:
1outOfRange
2inRange
 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.7

atEnvMonv2PsbTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2PsbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2PsbTable' 
A table of information about power supply bays in the system and
any devices that are installed.
atEnvMonv2PsbEntry row .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1
The description and current status of a power supply
bay device.
Indexes
Column Syntax OID
atEnvMonv2PsbHostStackMemberId
The index of the stack member hosting this power supply bay. For
a chassis switch, it corresponds to the card ID of the controller
that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack
Plus, the second chas…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.1
atEnvMonv2PsbHostBoardIndex
The index of the board hosting this power supply bay in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.2
atEnvMonv2PsbHostSlotIndex
The index of this power supply bay on its host board.
This index is fixed for each slot, on each type of board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.3
atEnvMonv2PsbHeldBoardIndex
The index of a board installed in this power supply bay.
This value corresponds to atEnvMonv2PsbSensorBoardIndex for
each sensor on this board. A value of 0 indicates that a
board is is either not present or not support…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.4
atEnvMonv2PsbHeldBoardId
The type of board installed in this power supply bay. The
values of this object are taken from the pprXxx object IDs
under the boards sub-tree in the parent MIB. A value of 0
indicates that a board is either not present…
ObjectIdentifier .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.5
atEnvMonv2PsbDescription
The description of this power supply bay.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.6

atEnvMonv2PsbSensorTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.4.2 · 1 row entry · 7 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2PsbSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2PsbSensorTable' 
A table of information about environment monitoring sensors
on devices installed in power supply bays.
atEnvMonv2PsbSensorEntry row .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1
The description and current status of a device installed
in a power supply bay.
Indexes
Column Syntax OID
atEnvMonv2PsbSensorStackMemberId
The index of the stack member hosting this sensor. For a
chassis switch, it corresponds to the card ID of the controller
that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack
Plus, the second chassis uses c…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.1
atEnvMonv2PsbSensorBoardIndex
The index of the board hosting this sensor in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.2
atEnvMonv2PsbSensorIndex
The index of this power supply bay environmental sensor on
its host board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.3
atEnvMonv2PsbSensorType
The type of environmental variable this sensor detects.
AtEnvMonv2PsbSensorType
Type Values:
0psbSensorTypeInvalid
1fanSpeedDiscrete
2temperatureDiscrete
3voltageDiscrete
 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.4
atEnvMonv2PsbSensorDescription
The description of this power supply bay environmental sensor.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.5
atEnvMonv2PsbSensorStatus
An indication of whether this environmental sensor is currently
in an alarm condition. A value of 'failed(1)' indicates that
the device is in a failure condition, 'good(2)' indicates that
the device is functioning norma…
Enumeration
Enumerated Values:
1failed
2good
3notPowered
4notPresent
 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.6
atEnvMonv2PsbSensorReading
An indication of whether this environmental sensor is
currently reading a value for the monitored device. A value
of 'no' indicates that there is no current reading, 'yes' indicates
that the monitored device is supplyin…
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.7

atEnvMonv2FaultLedTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.6 · 1 row entry · 7 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2FaultLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2FaultLedTable' 
A table of information detailing any LED fault indications on
the device.
atEnvMonv2FaultLedEntry row .1.3.6.1.4.1.207.8.4.4.3.12.6.1
An entry pertaining to a given fault LED.
Indexes
Column Syntax OID
atEnvMonv2FaultLedStackMemberId
The index of the stack member hosting this fault LED. For a
chassis switch, it corresponds to the card ID of the controller
that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack
Plus, the second chassis use…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.1
atEnvMonv2FaultLed1Flash
This object indicates whether a fault LED is currently showing
a system failure by flashing once. It indicates that one or
more heatsink fans have failed, or are operating below the
recommended speed.
Enumeration
Enumerated Values:
1heatsinkFanFailure
2noFault
 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.2
atEnvMonv2FaultLed2Flashes
This object indicates whether a fault LED is currently showing
a system failure by flashing twice. It indicates that one or
both of the chassis fans are not installed, or the fans are
operating below the recommended spe…
Enumeration
Enumerated Values:
1chassisFanFailure
2noFault
 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.3
atEnvMonv2FaultLed3Flashes
This object indicates whether a fault LED is currently showing
a system failure by flashing three times. It indicates that the
ability to monitor temperature or fans has failed.
Enumeration
Enumerated Values:
1sensorFailure
2noFault
 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.4
atEnvMonv2FaultLed4Flashes
This object indicates whether a fault LED is currently showing
a system failure by flashing four times. It indicates that an
XEM failed to initialise or is incompatible.
Enumeration
Enumerated Values:
1xemInitialisationFailure
2noFault
 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.5
atEnvMonv2FaultLed5Flashes
This object indicates whether a fault LED is currently showing
a system failure by flashing five times. This flashing
sequence is not currently in use.
Enumeration
Enumerated Values:
2noFault
 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.6
atEnvMonv2FaultLed6Flashes
This object indicates whether a fault LED is currently showing
a system failure by flashing six times. It indicates that the
device's temperature has exceeded the recommended threshold.
Enumeration
Enumerated Values:
1temperatureFailure
2noFault
 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.7

atEnvMonv2ContactInputTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.7 · 1 row entry · 5 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2ContactInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2ContactInputTable' 
A table of information about contact inputs available in the
device that are monitored by environment monitoring hardware.
atEnvMonv2ContactInputEntry row .1.3.6.1.4.1.207.8.4.4.3.12.7.1
The description and current state of a contact input.
Indexes
Column Syntax OID
atEnvMonv2ContactInputStackMemberId
The index of the stack member hosting this contact input.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.7.1.1
atEnvMonv2ContactInputBoardIndex
The index of the board hosting this contact input in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.7.1.2
atEnvMonv2ContactInputIndex
The numeric identifier of this contact input on its host board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.7.1.3
atEnvMonv2ContactInputDescription
The description of this contact input.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.7.1.4
atEnvMonv2ContactInputState
An indication of whether this contact input is currently
open or closed.
Enumeration
Enumerated Values:
1closed
2open
 .1.3.6.1.4.1.207.8.4.4.3.12.7.1.5

atEnvMonv2ContactOutputTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.8 · 1 row entry · 5 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2ContactOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2ContactOutputTable' 
A table of information about contact outputs available in the
device that are managed by environment monitoring hardware.
atEnvMonv2ContactOutputEntry row .1.3.6.1.4.1.207.8.4.4.3.12.8.1
The description and current state of a contact output.
Indexes
Column Syntax OID
atEnvMonv2ContactOutputStackMemberId
The index of the stack member hosting this contact output.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.8.1.1
atEnvMonv2ContactOutputBoardIndex
The index of the board hosting this contact output in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.8.1.2
atEnvMonv2ContactOutputIndex
The numeric identifier of this contact output on its host board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.8.1.3
atEnvMonv2ContactOutputDescription
The description of this contact output.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.8.1.4
atEnvMonv2ContactOutputState
An indication of whether this contact output is currently
open or closed.
Enumeration
Enumerated Values:
1closed
2open
 .1.3.6.1.4.1.207.8.4.4.3.12.8.1.5

atEnvMonv2ExternalPSUTable

table
.1.3.6.1.4.1.207.8.4.4.3.12.9 · 1 row entry · 5 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atEnvMonv2ExternalPSUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ENVMONv2-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ENVMONv2-MIB::atEnvMonv2ExternalPSUTable' 
Table of external PSU status.
atEnvMonv2ExternalPSUEntry row .1.3.6.1.4.1.207.8.4.4.3.12.9.1
The description and current status of an external power supply.
Indexes
Column Syntax OID
atEnvMonv2ExternalPSUStackMemberId
The index of the stack member hosting this external PSU.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.9.1.1
atEnvMonv2ExternalPSUBoardIndex
The index of the board hosting this external PSU in the board table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.9.1.2
atEnvMonv2ExternalPSUIndex
The numeric identifier of this external PSU on its host board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.12.9.1.3
atEnvMonv2ExternalPSUDescription
The description of this external PSU.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.12.9.1.4
atEnvMonv2ExternalPSUState
An indication of whether the supply potential of the external power
supply is present or not. A value of 'failed(1)' indicates that
no power is being received on this input, 'good(2)' indicates that
this input is receiv…
Enumeration
Enumerated Values:
1failed
2good
 .1.3.6.1.4.1.207.8.4.4.3.12.9.1.5