AT-ALMMON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
27

atAlmMonActionTable

table
.1.3.6.1.4.1.207.8.4.4.3.26.1 · 1 row entry · 11 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atAlmMonActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ALMMON-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ALMMON-MIB::atAlmMonActionTable' 
A table of information describing alarm monitoring inputs
and consequent actions (i.e. fault LED & relay outputs).
atAlmMonActionEntry row .1.3.6.1.4.1.207.8.4.4.3.26.1.1
The description and configuration of what to do for a specific monitored alarm.
Indexes
Column Syntax OID
atAlmMonActionStackMemberId
The index of the stack member of this alarm action.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.1
atAlmMonActionIndex
The numeric identifier of this alarm action.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.2
atAlmMonAlarmType
The type of alarm that this action monitors.
AtAlmMonAlarmType
Type Values:
1externalPSU
2epsr
3contactInput
4portLinkDown
5loopDetect
6mainPse
7portPoeFailure
8temperature
9g8032
10ufo
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.3
atAlmMonAlarmTypeSelection
The 1-based index of the alarm of the particular type (as catagorised by atAlmMonAlarmType).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.4
atAlmMonActionDescription
The description of this alarm monitoring entry.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.5
atAlmMonActionUseRelay1
Indicates/controls whether or not this alarm monitor drives the first relay output.
AtAlmMonActionUseOutputr/w
Type Values:
1unused
2used
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.6
atAlmMonActionUseRelay2
Indicates/controls whether or not this alarm monitor drives the second relay output.
AtAlmMonActionUseOutputr/w
Type Values:
1unused
2used
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.7
atAlmMonActionUseRelay3
Indicates/controls whether or not this alarm monitor drives the third relay output.
AtAlmMonActionUseOutputr/w
Type Values:
1unused
2used
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.8
atAlmMonActionUseFaultLed
Indicates/controls whether or not this alarm monitor drives the fault LED.
AtAlmMonActionUseOutputr/w
Type Values:
1unused
2used
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.9
atAlmMonAbnormalState
Indicates/sets the abnormal (i.e. alarm active) state for a contact input.
Only used for contactInput alarm monitors, ignored for all other types.
AtAlmMonAbnormalStater/w
Type Values:
1open
2closed
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.10
atAlmMonActionState
Indicates the current state of this alarm monitor.
AtAlmMonActionState
Type Values:
1inactive
2active
 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.11

atAlmMonAvailableTable

table
.1.3.6.1.4.1.207.8.4.4.3.26.3 · 1 row entry · 6 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atAlmMonAvailableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ALMMON-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ALMMON-MIB::atAlmMonAvailableTable' 
A table of information listing available alarms on the device.
atAlmMonAvailableEntry row .1.3.6.1.4.1.207.8.4.4.3.26.3.1
The description and configuration of each available alarm.
Indexes
Column Syntax OID
atAlmMonAvailableAlarmId
The unique numeric identifier for this alarm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.3.1.1
atAlmMonAvailableType
The type of this alarm, such as externalPSU(1), epsr(2), etc.
AtAlmMonAlarmType
Type Values:
1externalPSU
2epsr
3contactInput
4portLinkDown
5loopDetect
6mainPse
7portPoeFailure
8temperature
9g8032
10ufo
 .1.3.6.1.4.1.207.8.4.4.3.26.3.1.2
atAlmMonAvailableTypeIndex
The index of the particular alarm type (catagorised by atAlmMonAlarmType).

For some alarms there are multiple sources on the device (i.e. power supplies).
In these cases this object indicates which source…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.3.1.3
atAlmMonAvailableStkId
The id of stack member this alarm triggers on.

This object is used for externalPSU(1), contactInput(3), portLinkDown(4),
portPoeFailure(7) and temperature(8) alarm only.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.3.1.4
atAlmMonAvailableIfName
The name of the specific interface that this alarm triggers on, such as 'port1.0.1.

This object is used for portLinkDown(4) and portPoeFailure(7) alarm only.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.207.8.4.4.3.26.3.1.5
atAlmMonAvailableState
Indicates the current state of this alarm.
AtAlmMonActionState
Type Values:
1inactive
2active
 .1.3.6.1.4.1.207.8.4.4.3.26.3.1.6

atAlmMonOutputRelayTable

table
.1.3.6.1.4.1.207.8.4.4.3.26.4 · 1 row entry · 4 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atAlmMonOutputRelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ALMMON-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ALMMON-MIB::atAlmMonOutputRelayTable' 
This table lists all associations existing on the device between output
relays and alarms.
          
Theoretically, an output relay on the device can be triggered by multiple
alarms and an alarm can trigger multiple output relays.
atAlmMonOutputRelayEntry row .1.3.6.1.4.1.207.8.4.4.3.26.4.1
This entry reprents an association between one ouput relay and one alarm.

To configure an alarm to use an output relay, a user needs to create a new
entry. This can be done through writing a value of used(2…
Indexes
Column Syntax OID
atAlmMonOutputRelayStkId
The id of stack member that the relay(s) reside on.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.4.1.1
atAlmMonOutputRelayNumber
The number (i.e. the 1 based index) of the relay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.4.1.2
atAlmMonOutputRelayAlarmId
The id of the alarm that may use this relay output.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.4.1.3
atAlmMonOutputRelayUsage
This object indicates whether or not the relay output is used.

Since there are entries only for existing associations between the output
relays and the alarms, the object value should be always used(2).
…
AtAlmMonActionUseOutputr/w
Type Values:
1unused
2used
 .1.3.6.1.4.1.207.8.4.4.3.26.4.1.4

atAlmMonOutputLedTable

table
.1.3.6.1.4.1.207.8.4.4.3.26.5 · 1 row entry · 3 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atAlmMonOutputLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ALMMON-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ALMMON-MIB::atAlmMonOutputLedTable' 
This table lists all associations existing on the device between output
LED(s) and alarms.
          
Theoretically, an output LED on the device can be triggered by multiple
alarms and an alarm can trigger multiple LED(s).
atAlmMonOutputLedEntry row .1.3.6.1.4.1.207.8.4.4.3.26.5.1
This entry reprents an association between one LED and one alarm.

To configure an alarm to use an output LED, a user needs to create a new
entry. This can be done through writing a value of used(2) to objec…
Indexes
Column Syntax OID
atAlmMonOutputLedStkId
The id of stack member that the output LED resides on.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.5.1.1
atAlmMonOutputLedAlarmId
The id of the alarm that may use this output LED.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.5.1.2
atAlmMonOutputLedUsage
This object indicates whether or not an LED is used.

Since there are entries only for existing associations between the output
LED(s) and the alarms, the object value should be always used(2).
…
AtAlmMonActionUseOutputr/w
Type Values:
1unused
2used
 .1.3.6.1.4.1.207.8.4.4.3.26.5.1.3

atAlmMonInputContactTable

table
.1.3.6.1.4.1.207.8.4.4.3.26.6 · 1 row entry · 3 columns
Open in standard view
Uses the allied variant from /opt/observium/mibs/allied.
Command help
Walk atAlmMonInputContactTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-ALMMON-MIB' -M '/opt/observium/mibs/allied:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-ALMMON-MIB::atAlmMonInputContactTable' 
This table lists all input contacts on the device and their positions.
atAlmMonInputContactEntry row .1.3.6.1.4.1.207.8.4.4.3.26.6.1
The information of each input contact configuration.
Indexes
Column Syntax OID
atAlmMonInputContactStkId
The id of stack member that the input contact reside on.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.6.1.1
atAlmMonInputContactNumber
The number (i.e. the 1 based index) of the input contact.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.207.8.4.4.3.26.6.1.2
atAlmMonInputContactPosition
This object represents the position of the input contact. It is either
open or closed.
A user can reconfigure the position of an input contact by setting
a different value to this object.
AtAlmMonContactPositionr/w
Type Values:
1open
2closed
 .1.3.6.1.4.1.207.8.4.4.3.26.6.1.3