ASTERFUSION-MIB Table View

A list of interface entries.  The number of entries is
given by the value of ifNumber.

ifEntry row .1.3.6.1.2.1.2.2.1

An entry containing management information applicable to a
particular interface.

Indexes

ifIndex

Column	Syntax	OID
ifIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	InterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.2.2.1.1
ifDescr A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.	DisplayString Constraints: range: 0-255	.1.3.6.1.2.1.2.2.1.2
ifType The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.2.1.2.2.1.3
ifMtu The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that ca…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.2.2.1.4
ifSpeed An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.5
ifPhysAddress The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the for…	PhysAddress	.1.3.6.1.2.1.2.2.1.6
ifAdminStatus The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a resu…	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.2.1.2.2.1.7
ifOperStatus The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed t…	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.2.1.2.2.1.8
ifLastChange The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object c…	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.9
ifInOctets The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.10
ifInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.11
ifInNUcastPktsdeprecated The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occ…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.12
ifInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.13
ifInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of i…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.14
ifInUnknownProtos For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protoc…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.15
ifOutOctets The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at othe…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.16
ifOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.17
ifOutNUcastPktsdeprecated The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.18
ifOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.19
ifOutErrors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.20
ifOutQLendeprecated The length of the output packet queue (in packets).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.2.2.1.21
ifSpecificdeprecated A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this obj…	ObjectIdentifier	.1.3.6.1.2.1.2.2.1.22

BGP peer table.  This table contains,
one entry per BGP peer, information about
the connections with BGP peers.

bgpPeerEntry row .1.3.6.1.2.1.15.3.1

Entry containing information about the
connection with a BGP peer.

Indexes

bgpPeerRemoteAddr

Column	Syntax	OID
bgpPeerIdentifier The BGP Identifier of this entry's BGP peer.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.15.3.1.1
bgpPeerState The BGP peer connection state.	Enumeration Enumerated Values: 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established	.1.3.6.1.2.1.15.3.1.2
bgpPeerAdminStatus The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parame…	Enumerationr/w Enumerated Values: 1 stop 2 start	.1.3.6.1.2.1.15.3.1.3
bgpPeerNegotiatedVersion The negotiated version of BGP running between the two peers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.15.3.1.4
bgpPeerLocalAddr The local IP address of this entry's BGP connection.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.15.3.1.5
bgpPeerLocalPort The local port for the TCP connection between the BGP peers.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.15.3.1.6
bgpPeerRemoteAddr The remote IP address of this entry's BGP peer.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.15.3.1.7
bgpPeerRemotePort The remote port for the TCP connection between the BGP peers. Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropriate reference to the standard MIB TCP …	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.15.3.1.8
bgpPeerRemoteAs The remote autonomous system number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.15.3.1.9
bgpPeerInUpdates The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.15.3.1.10
bgpPeerOutUpdates The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.15.3.1.11
bgpPeerInTotalMessages The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.15.3.1.12
bgpPeerOutTotalMessages The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.15.3.1.13
bgpPeerLastError The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte …	OctetString Constraints: range: 2-2	.1.3.6.1.2.1.15.3.1.14
bgpPeerFsmEstablishedTransitions The total number of times the BGP FSM transitioned into the established state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.15.3.1.15
bgpPeerFsmEstablishedTime This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is boo…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.15.3.1.16
bgpPeerConnectRetryInterval Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.15.3.1.17
bgpPeerHoldTime Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in bgpPeerHoldTimeConfigured and the Hold Time receive…	Integer32 Constraints: range: 0-0 range: 3-65535	.1.3.6.1.2.1.15.3.1.18
bgpPeerKeepAlive Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with bgpPeerHoldTime, it has the same proportion as what b…	Integer32 Constraints: range: 0-21845	.1.3.6.1.2.1.15.3.1.19
bgpPeerHoldTimeConfigured Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an O…	Integer32r/w Constraints: range: 3-65535 range: 0-0	.1.3.6.1.2.1.15.3.1.20
bgpPeerKeepAliveConfigured Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeer…	Integer32r/w Constraints: range: 0-21845	.1.3.6.1.2.1.15.3.1.21
bgpPeerMinASOriginationInterval Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.15.3.1.22
bgpPeerMinRouteAdvertisementInterval Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.15.3.1.23
bgpPeerInUpdateElapsedTime Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is set to zero (0).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.15.3.1.24

A list of interface entries.  The number of entries is
given by the value of ifNumber.  This table contains
additional objects for the interface table.

ifXEntry row .1.3.6.1.2.1.31.1.1.1

An entry containing additional management information
applicable to a particular interface.

Indexes

No indexes recorded

Column	Syntax	OID
ifName The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might …	DisplayString	.1.3.6.1.2.1.31.1.1.1.1
ifInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.31.1.1.1.2
ifInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-init…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.31.1.1.1.3
ifOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.31.1.1.1.4
ifOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discon…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.31.1.1.1.5
ifHCInOctets The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initializati…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.6
ifHCInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.7
ifHCInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Thi…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.8
ifHCInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinui…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.9
ifHCOutOctets The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-init…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.10
ifHCOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.11
ifHCOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer proto…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.12
ifHCOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-b…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.31.1.1.1.13
ifLinkUpDownTrapEnable Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.31.1.1.1.14
ifHighSpeed An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. Fo…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.31.1.1.1.15
ifPromiscuousMode This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the med…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.31.1.1.1.16
ifConnectorPresent This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.31.1.1.1.17
ifAlias This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias…	DisplayStringr/w Constraints: range: 0-64	.1.3.6.1.2.1.31.1.1.1.18
ifCounterDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.31.1.1.1.19

This table contains one row per physical entity.  There is
always at least one row for an 'overall' physical entity.

entPhysicalEntry row .1.3.6.1.2.1.47.1.1.1.1

Information about a particular physical entity.

Each entry provides objects (entPhysicalDescr,
entPhysicalVendorType, and entPhysicalClass) to help an NMS
identify and characterize the entry, and objects
(e…

Indexes

entPhysicalIndex

Column	Syntax	OID
entPhysicalDescr A textual description of physical entity. This object should contain a string which identifies the manufacturer's name for the physical entity, and should be set to a distinct value for each version or model of the phy…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.47.1.1.1.1.2
entPhysicalVendorType An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II's sysObjectID. An agent should set this object to a enterprise-specifi…	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.2.1.47.1.1.1.1.3
entPhysicalContainedIn The value of entPhysicalIndex for the physical entity which 'contains' this physical entity. A value of zero indicates this physical entity is not contained in any other physical entity. Note that the set of 'containm…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.47.1.1.1.1.4
entPhysicalClass An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value which most accurately indicates the general class of the physical entit…	PhysicalClass Type Values: 1 other 2 unknown 3 chassis 4 backplane 5 container 6 powerSupply 7 fan 8 sensor 9 module 10 port 11 stack Description: An enumerated value which provides an indication of the general hardware type of a particular physical entity. There are no restrictions as to the number of entPhysicalEntries of each entPhysicalClass, which must be ins…	.1.3.6.1.2.1.47.1.1.1.1.5
entPhysicalParentRelPos An indication of the relative position of this 'child' component among all its 'sibling' components. Sibling components are defined as entPhysicalEntries which share the same instance values of each of the entPhysicalCo…	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.2.1.47.1.1.1.1.6
entPhysicalName The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This …	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.47.1.1.1.1.7
entPhysicalHardwareRev The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision …	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.47.1.1.1.1.8
entPhysicalFirmwareRev The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such info…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.47.1.1.1.1.9
entPhysicalSoftwareRev The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such info…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.47.1.1.1.1.10
entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present). On the first instantiation of an p…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 0-32	.1.3.6.1.2.1.47.1.1.1.1.11
entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present). Note that comparisons between instances of the entPhysi…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.47.1.1.1.1.12
entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself. If the mod…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.47.1.1.1.1.13
entPhysicalAlias This object is an 'alias' name for the physical entity as specified by a network manager, and provides a non-volatile 'handle' for the physical entity. On the first instantiation of an physical entity, th…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 0-32	.1.3.6.1.2.1.47.1.1.1.1.14
entPhysicalAssetID This object is a user-assigned asset tracking identifier for the physical entity as specified by a network manager, and provides non-volatile storage of this information. On the first instantiation of an …	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 0-32	.1.3.6.1.2.1.47.1.1.1.1.15
entPhysicalIsFRU This object indicates whether or not this physical entity is considered a 'field replaceable unit' by the vendor. If this object contains the value 'true(1)' then this entPhysicalEntry identifies a field replaceable un…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.47.1.1.1.1.16

This table contains one row per physical sensor represented
by an associated row in the entPhysicalTable.

entPhySensorEntry row .1.3.6.1.2.1.99.1.1.1

Information about a particular physical sensor.

An entry in this table describes the present reading of a
sensor, the measurement units and scale, and sensor
operational status.

Entries are cre…

Indexes

entPhysicalIndex

Column	Syntax	OID
entPhySensorType The type of data returned by the associated entPhySensorValue object. This object SHOULD be set by the agent during entry creation, and the value SHOULD NOT change during operation.	EntitySensorDataType Type Values: 1 other 2 unknown 3 voltsAC 4 voltsDC 5 amperes 6 watts 7 hertz 8 celsius 9 percentRH 10 rpm 11 cmm 12 truthvalue Description: An object using this data type represents the Entity Sensor measurement data type associated with a physical sensor value. The actual data units are determined by examining an object of this type together with the assoc…	.1.3.6.1.2.1.99.1.1.1.1
entPhySensorScale The exponent to apply to values returned by the associated entPhySensorValue object. This object SHOULD be set by the agent during entry creation, and the value SHOULD NOT change during operation.	EntitySensorDataScale Type Values: 1 yocto 2 zepto 3 atto 4 femto 5 pico 6 nano 7 micro 8 milli 9 units 10 kilo 11 mega 12 giga 13 tera 14 peta 15 exa 16 zetta 17 yotta Description: An object using this data type represents a data scaling factor, represented with an International System of Units (SI) prefix. The actual data units are determined by examining an object of this type together with the…	.1.3.6.1.2.1.99.1.1.1.2
entPhySensorPrecision The number of decimal places of precision in fixed-point sensor values returned by the associated entPhySensorValue object. This object SHOULD be set to '0' when the associated entPhySensorType value is n…	EntitySensorPrecision Type Constraints: range: -8..9 Description: An object using this data type represents a sensor precision range. An object of this type SHOULD be defined together with objects of type EntitySensorDataType and EntitySensorDataScale. Together, associated…	.1.3.6.1.2.1.99.1.1.1.3
entPhySensorValue The most recent measurement obtained by the agent for this sensor. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects mu…	EntitySensorValue Type Constraints: range: -1000000000..1000000000 Description: An object using this data type represents an Entity Sensor value. An object of this type SHOULD be defined together with objects of type EntitySensorDataType, EntitySensorDataScale and EntitySensorPrecision. Together, …	.1.3.6.1.2.1.99.1.1.1.4
entPhySensorOperStatus The operational status of the sensor.	EntitySensorStatus Type Values: 1 ok 2 unavailable 3 nonoperational Description: An object using this data type represents the operational status of a physical sensor. The value 'ok(1)' indicates that the agent can obtain the sensor value. The value 'unavailable(2)' indicates t…	.1.3.6.1.2.1.99.1.1.1.5

This is fan info table.

fanEntry row .1.3.6.1.4.1.56928.2.1.4.1

This is fan entry.

Indexes

fanName

Column	Syntax	OID
fanName This is fan name.	DisplayString	.1.3.6.1.4.1.56928.2.1.4.1.1
fanSpeed This is fan speed.	DisplayString	.1.3.6.1.4.1.56928.2.1.4.1.2
fanDirection This is fan direction.	DisplayString	.1.3.6.1.4.1.56928.2.1.4.1.3
fanPresence This is fan presence.	DisplayString	.1.3.6.1.4.1.56928.2.1.4.1.4
fanStatus This is fan status.	DisplayString	.1.3.6.1.4.1.56928.2.1.4.1.5
fanTimestamp This is fan timestamp.	DisplayString	.1.3.6.1.4.1.56928.2.1.4.1.6

This is psu info table.

psuEntry row .1.3.6.1.4.1.56928.2.1.5.1

This is psu entry.

Indexes

psuName

Column	Syntax	OID
psuName This is psu name.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.1
psuPresence This is psu presence.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.2
psuStatus This is psu status.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.3
psuPower This is psu power.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.4
psuCurrentIn This is psu input current.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.5
psuCurrentOut This is psu output current.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.6
psuVoltageIn This is psu input voltage.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.7
psuVoltageOut This is psu output voltage.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.8
psuPowerIn This is psu input power.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.9
psuPowerOut This is psu output power.	DisplayString	.1.3.6.1.4.1.56928.2.1.5.1.10

This is docker info table.

dockerEntry row .1.3.6.1.4.1.56928.2.1.6.1

This is docker entry.

Indexes

dockerName

Column	Syntax	OID
dockerName This is docker name.	DisplayString	.1.3.6.1.4.1.56928.2.1.6.1.1
dockerStatus This is docker status.	DisplayString	.1.3.6.1.4.1.56928.2.1.6.1.2
dockerStartTime This is docker start time.	DisplayString	.1.3.6.1.4.1.56928.2.1.6.1.3

This is interfaces base table.

intfEntry row .1.3.6.1.4.1.56928.2.2.1.1

This is interfaces entry.

Indexes

intfName

Column	Syntax	OID
intfName	DisplayString	.1.3.6.1.4.1.56928.2.2.1.1.1
intfInIpv4Pkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.2
intfInIpv4Octes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.3
intfInIpv6Pkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.4
intfInIpv6Octes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.5
intfOutIpv4Octs	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.6
intfOutIpv6Octs	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.7
vlanifInPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.8
vlanifOutPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.1.1.9

This is interfaces rate table.

intfRateEntry row .1.3.6.1.4.1.56928.2.2.2.1

This is interfaces entry.

Indexes

intfName

Column	Syntax	OID
intfName	DisplayString	.1.3.6.1.4.1.56928.2.2.2.1.1
intfRxPktRate	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.2.1.2
intfTxPktRate	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.2.1.3
intfRxBytRate	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.2.1.4
intfTxBytRate	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.2.1.5
intfRxRateUtil	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.2.1.6
intfTxRateUtil	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.56928.2.2.2.1.7

This is interface module table.

intfModuleEntry row .1.3.6.1.4.1.56928.2.3.1.1

This is interface module entry.

Indexes

intfName

Column	Syntax	OID
intfName This is intfName.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.1
intfModuleTemperature Unit: °C.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.2
intfModuleVoltage Unit: V.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.3
intfModuleRx1Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.4
intfModuleTx1Bias Unit: mA.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.5
intfModuleTx1Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.6
intfModuleRx2Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.7
intfModuleTx2Bias Unit: mA.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.8
intfModuleTx2Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.9
intfModuleRx3Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.10
intfModuleTx3Bias Unit: mA.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.11
intfModuleTx3Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.12
intfModuleRx4Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.13
intfModuleTx4Bias Unit: mA.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.14
intfModuleTx4Power Unit: dbm.	DisplayString	.1.3.6.1.4.1.56928.2.3.1.1.15