ASSETMANAGEMENT-MIB Table View

A list of configuration entries. The number of entries is given by the value of assetStripCount.

assetStripConfigurationEntry row .1.3.6.1.4.1.13742.7.1.6.1.1

An entry containing configuration objects for a particular asset management strip unit.

Indexes

assetStripID

Column	Syntax	OID
assetStripID A unique value for each asset strip. Its value ranges between 1 and the value of assetStripCount.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13742.7.1.6.1.1.1
rackUnitCount The number of rack-units for the asset management.	Integer32r/w Constraints: range: 8-64	.1.3.6.1.4.1.13742.7.1.6.1.1.2
assetStripState Asset management strip state.	AssetStripStateEnumeration Type Values: 1 disconnected 2 firmwareUpdate 3 unsupported 4 available	.1.3.6.1.4.1.13742.7.1.6.1.1.3
assetStripName Asset management strip name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.6.1.1.4
rackUnitNumberingMode The rack unit nmbering mode for this asset strip.	RackUnitNumberingModeEnumerationr/w Type Values: 0 topDown 1 bottomUp	.1.3.6.1.4.1.13742.7.1.6.1.1.5
rackUnitNumberingOffset The offset (starting value) for rack Unit Numbering; This takes care of the case in which the asset strip is monitoring not all the assets but a subset of it, starting from racknumberingOffset. For example, the asset st…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.7.1.6.1.1.6
assetStripOrientation Is the asset strip oriented such that the connector is at the top or the bottom? If the asset strip has a tilt sensor, then this varaible is read-only and an to set (write) it will result in an error. If the asset strip…	AssetStripOrientationEnumerationr/w Type Values: 0 topConnector 1 bottomConnector	.1.3.6.1.4.1.13742.7.1.6.1.1.7
currentMainTagCount Number of tags currently connected to the main strip.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.7.1.6.1.1.8
currentBladeTagCount Number of tags currently connected to blade extensions. This may be larger than the maxBladeTagCount. In this case an overflow occured and all tags over maxBladeTagCount are not recognized.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.7.1.6.1.1.9
maxMainTagCount Maximum number of tags on the main asset strip.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.7.1.6.1.1.10
maxBladeTagCount Maximum number of blade tags supported.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.7.1.6.1.1.11
bladeExtensionOverflow Set if the maximum number of supported tags on blade extensions is reached. When this flag is set, new tags on blade extensions won't be discovered anymore until other tags on blade extensions are removed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13742.7.1.6.1.1.12
assetStripType The asset strip type.	AssetStripTypeEnumeration Type Values: 0 simple 1 composite	.1.3.6.1.4.1.13742.7.1.6.1.1.13
numberOfComponentAssetStrips The number of components building a composite asset strip.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.13742.7.1.6.1.1.14
assetStripDefaultLEDColorConnected Default color of all LEDs (RGB) when a tag is connected during automatic operation; in binary format.	RGBCOLORr/w Type Constraints: range: 3	.1.3.6.1.4.1.13742.7.1.6.1.1.15
assetStripDefaultLEDColorConnectedStr Default color of all LEDs (RGB) when a tag is connected during automatic operation; string with 3 hex octets	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.6.1.1.16
assetStripDefaultLEDColorDisconnected Default color of all LEDs (RGB) when no tag is connected during automatic operation; in binary format.	RGBCOLORr/w Type Constraints: range: 3	.1.3.6.1.4.1.13742.7.1.6.1.1.17
assetStripDefaultLEDColorDisconnectedStr Default color of all LEDs (RGB) when no tag is connected during automatic operation; string with 3 hex octets	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.6.1.1.18

A list of asset management extries containing tag information and LED state.
The number of entries is given by the value of rackUnitCount.

assetManagementEntry row .1.3.6.1.4.1.13742.7.1.7.1.1

An entry containing tag information and LED state for a rack unit.

Indexes

assetStripID rackUnitID

Column	Syntax	OID
rackUnitID A unique value for each rack unit. Its value ranges between 1 and the value of rackUnitCount.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13742.7.1.7.1.1.1
ledOperationMode Operation mode of the LED (manual or automatic, based on tag connection).	AssetManagementLEDOperationModeEnumerationr/w Type Values: 1 manual 2 automatic	.1.3.6.1.4.1.13742.7.1.7.1.1.2
ledMode Mode of the LED (on, off, fastBlink,slowBlink). Setting this value automatically switches the ledOperationMode to manual.	AssetManagementLEDModeEnumerationr/w Type Values: 1 on 2 off 3 fastBlink 4 slowBlink	.1.3.6.1.4.1.13742.7.1.7.1.1.3
ledColor Color of the LED (RGB) in binary format. Setting this value automatically switches the ledOperationMode to manual.	RGBCOLORr/w Type Constraints: range: 3	.1.3.6.1.4.1.13742.7.1.7.1.1.4
ledColorStr Color of the LED (RGB) in string format. It contains 3 hex octets for the RGB colors. Setting this value automatically switches the ledOperationMode to manual.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.7.1.1.5
tagID Asset management tag attached to the rack unit. Empty in case there is no tag attached.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.7.1.1.6
tagFamily Family of the asset management tag attached to the rack unit. Empty in case there is no tag attached.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.7.1.1.7
rackUnitPosition A number associated with each rack unit. Its value depends on the rack unit numbering mode. It ranges between 1 and the value of rackUnitCount. If the asset strip is disconnected, then the value is 0.	Integer32 Constraints: range: 0-256	.1.3.6.1.4.1.13742.7.1.7.1.1.8
rackUnitType Type of the connected tag (single server or blade extension). If the asset strip is disconnected, then the value is unknown. If the asset tag is disconnected, then the value is none.	RackUnitTypeEnumeration Type Values: 1 single 2 blade 30 none 31 unknown	.1.3.6.1.4.1.13742.7.1.7.1.1.9
bladeExtensionSize In case a blade extension is connected this returns the number of slots on the extension. If the asset strip is disconnected or no blade is connected, then the value is 0.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.13742.7.1.7.1.1.10
rackUnitName Name for a specific rackunit, may be feeely chosen.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.7.1.1.12
assetStripCascadePosition This is the position of the asset Strip in a cascaded chain. Numbered in ascending order starting with the asset strip connected to the device (EMX/PX). For non-cascaded asset strips, value = 1. If the asset strip is di…	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.13742.7.1.7.1.1.13
rackUnitRelativePosition This is the relative position of the rackUnit within the assetStrip. For cascaded asset strips such as the AMS-M2-Z and AMS-M3-Z, it is numbered in ascending order starting with the rackunit closest to the asset strip e…	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.13742.7.1.7.1.1.14
assetStripNumberOfRackUnits For non-cascaded asset strips, value = rackUnitCount For cascaded asset strips, it is the number of rack units in the asset Strip. Examples: 2 for AMS-M2-Z, 3 for AMS-M3-Z.	Integer32 Constraints: range: 0-256	.1.3.6.1.4.1.13742.7.1.7.1.1.15

A list of blade server extension entries containing tag information.

bladeExtensionEntry row .1.3.6.1.4.1.13742.7.1.7.2.1

An entry containing tag information for a blade server extension.

Indexes

assetStripID rackUnitID bladeSlotID

Column	Syntax	OID
bladeSlotID A unique value for each slot on a blade extension.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.13742.7.1.7.2.1.1
bladeTagID Asset management tag attached to a blade extension at the rack unit. Empty in case there is no tag attached.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.1.7.2.1.2
bladeSlotPosition A number associated with each blade slot. It ranges between 1 and the value of bladeExtensionSize.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13742.7.1.7.2.1.3

A ring buffer containing asset management events.

assetManagementLogEntry row .1.3.6.1.4.1.13742.7.3.2.1

An entry in the asset management log table.

Indexes

logIndex

Column	Syntax	OID
logIndex The index of an entry in the log ring buffer. Its value ranges between 1 and logSize.	Integer32 Constraints: range: 1-5000	.1.3.6.1.4.1.13742.7.3.2.1.1
logTimeStamp The time of the log entry in seconds relative to January 1, 1970 00:00 UTC.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.7.3.2.1.2
logEventType The type of this log entry.	LogEventTypeEnumeration Type Values: 0 empty 1 assetTagConnected 2 assetTagDisconnected 3 assetStripStateChange	.1.3.6.1.4.1.13742.7.3.2.1.3
logAssetStripNumber A unique value for each asset strip. Its value ranges between 1 and the value of assetStripCount. This value is only valid for non-empty log entries	Integer32 Constraints: range: 0-256	.1.3.6.1.4.1.13742.7.3.2.1.4
logRackUnitNumber A unique value for each rack unit. Its value ranges between 1 and the value of rackUnitCount. It corresponds with rackUnitID, the fixed ordinal index of each rack unit. This value is only valid for assetTagConnected and…	Integer32 Constraints: range: 0-256	.1.3.6.1.4.1.13742.7.3.2.1.5
logRackUnitPosition A number associated with each rack unit. Its value depends on the rack unit numbering mode. It ranges between 1 and the value of rackUnitCount. If the asset strip is disconnected, then the value is 0. This value is only…	Integer32 Constraints: range: 0-256	.1.3.6.1.4.1.13742.7.3.2.1.6
logSlotNumber A unique value for each slot on a blade extension. Value of 0 indicates a tag on the main strip. If the asset strip is disconnected, the value is 0 as well. Use logEventType to distinguish the validity.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.13742.7.3.2.1.7
logTagID Asset management tag attached to the rack unit. Empty in case there is no tag attached.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.3.2.1.8
logAssetStripState Asset management strip state.	AssetStripStateEnumeration Type Values: 1 disconnected 2 firmwareUpdate 3 unsupported 4 available	.1.3.6.1.4.1.13742.7.3.2.1.9
logParentBladeID In case the tag is attached to a blade extension, this indicates the tagID of the extension. Empty in case there is no tag attached or the tag is attached on the main strip.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.7.3.2.1.10