ASAM-ALARM-MIB Table View

This table defines all the possible alarms at the agent.
For each alarm, there is an entry. Each entry consists of an index
for the table, alarm id, alarm category, alarm On/Off thresholds
and timebases and an alarm logging mode. The severity, reporting
and logging are manageable objects for the SNMP Manager.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmEntry row .1.3.6.1.4.1.637.61.1.3.1.1

Entry for alarm table.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmId

Column	Syntax	OID
asamAlarmIdmandatory This is the unique id for an alarm. It is a combination of 2 distinct parts of information : the alarm type and the alarm number. The first half represents the type and the second (most right) part the alarm number. Thi…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.1.1.1
asamAlarmCategorymandatory This object defines the category of an alarm. Alarm categories are defined in X.733 as Communications, QualityOfService, Processing Error, Equipment and Environmental. ALCATEL NOTE: SUPPORT: YES INSR…	AsamAlarmCategoryType Type Values: 1 communications 2 qualityofService 3 processingError 4 equipment 5 environmental	.1.3.6.1.4.1.637.61.1.3.1.1.2
asamAlarmSeveritymandatory This object is defined to assign a severity level to an alarm. This object may be indeterminate, warning, minor, major, critical and ignore. In case of severity ignore, the alarm is ignored by the system and all intern…	AsamAlarmSeverityTyper/w Type Values: 0 alllevel 1 indeterminate 2 warning 3 minor 4 major 5 critical 6 ignore	.1.3.6.1.4.1.637.61.1.3.1.1.3
asamAlarmServAffectmandatory This object defines whether an alarm is service affecting or not. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -	AsamAlarmServAffTyper/w Type Values: 0 allAffecting 1 serviceAffecting 2 notServiceAffecting	.1.3.6.1.4.1.637.61.1.3.1.1.4
asamAlarmOnThresholdobsolete This object defines the threshold value for an alarm to be ON.	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.1.1.5
asamAlarmOffThresholdobsolete This object defines the threshold value for an alarm to be OFF.	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.1.1.6
asamAlarmOnTimebaseobsolete This object defines the number of miliseconds that the alarm should be persistant ON before it is reported ON.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.1.1.7
asamAlarmOffTimebaseobsolete This object defines the number of miliseconds that the alarm should be persistant OFF before it is reported OFF.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.1.1.8
asamAlarmRepModemandatory This object is defined to manage the reporting of the alarm. If it is disabled, the alarm is not reported to the SNMP Manager. If it is enabled, reporting to the manager is possible (provided it has a high enough severi…	AsamAlarmModeTyper/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.637.61.1.3.1.1.9
asamAlarmLogModemandatory This object is to manage the logging of the alarm. If this object is disabled, the alarm is not logged. If it is enabled, an alarm is logged in the AlarmLoggingTable if it has a high enough severity. ALCA…	AsamAlarmModeTyper/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.637.61.1.3.1.1.10
asamAlarmEntryConfigStatemandatory This object represents the status of configured values of the entry. It indicates whether a system created row contains all system init values (staticAllInitialValues(1)) or whether the values are already modified by …	RowConfigState Type Values: 1 staticAllInitialValues 2 staticOperatorModified 3 operatorCreated	.1.3.6.1.4.1.637.61.1.3.1.1.11

This table contains the currently active alarms, ordered by severity
(highest first). Each entry contains information on the alarm type,
alarm status, two indexes and the last time that the entry was
changed. Only alarms with a reporting mode set to ON and a severity
equal or higher than the configured current table severity are
entered in this table.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamCurrentAlarmEntry row .1.3.6.1.4.1.637.61.1.3.7.1

Entry for CurrentAlarmTable.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamCurrentAlarmIndex

Column	Syntax	OID
asamCurrentAlarmIndexmandatory Index for a Current Alarm Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.7.1.1
asamCurrentAlarmTypemandatory This object defines the type of the alarms that are active in this entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	AsamAlarmType Type Constraints: range: 1..65535	.1.3.6.1.4.1.637.61.1.3.7.1.2
asamCurrentAlarmStatusmandatory This object defines the current status of all alarms within one alarm type and one index1-index2 combination at that time. The alarms are represented in a bitmap with the following bitpositions: 1 NoDefect …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.7.1.3
asamCurrentAlarmIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition, refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.7.1.4
asamCurrentAlarmIndex2mandatory This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.7.1.5
asamCurrentAlarmPtrobsolete This object is currently not used. In future releases this object will be used to point to additional information.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.7.1.6
asamCurrentAlarmTimemandatory This object gives the time in seconds when the entry was updated, respectively added. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.7.1.7
asamCurrentAlarmAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.7.1.8

This table is used to log all alarm changes of alarms with a log
status set to active and a severity level equal or higher than the
configured logging severity. The entries are ordered by time. The
latest alarm change is logged as the last entry of this table.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmLogEntry row .1.3.6.1.4.1.637.61.1.3.15.1

Entry for Alarm Log Table.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmLogIndex

Column	Syntax	OID
asamAlarmLogIndexmandatory Index for the entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.15.1.1
asamAlarmLogAlarmTypemandatory This object defines the type of the alarms in this entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	AsamAlarmType Type Constraints: range: 1..65535	.1.3.6.1.4.1.637.61.1.3.15.1.2
asamAlarmLogAlarmStatusmandatory This object defines the status of all alarms within one alarm type and one index1-index2 combination for this logged entry. The alarms are represented in a bitmap with the following bitpositions : 1 NoDefect…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.15.1.3
asamAlarmLogStatusChangemandatory This object defines the difference in the status bitmap with its previous logged value. The bitpositions are conforming to the ones in the asamAlarmLogAlarmStatus object. ALCATEL NOTE: SUPPORT: YES I…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.15.1.4
asamAlarmLogIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.15.1.5
asamAlarmLogIndex2mandatory This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.15.1.6
asamAlarmLogPtrobsolete This object is currently not used. In future releases this object will be used to point to additional information.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.15.1.7
asamAlarmLogTimemandatory This object gives the time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.15.1.8
asamAlarmLogAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.15.1.9
asamAlarmLogBasicAlarmIdmandatory The meaning of this object depends on the value of asamAlarmLogAlarmType. The following situations are possible: 1. The value of the asamAlarmLogAlarmType object corresponds to 'temp…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.15.1.10

This table is empty when the snapshot table status is set to
notInUse. When a snapshot is taken (see the description of the
snapshot table status object for a complete scenario), this table
will contain all active alarms, at the time the snapshot was taken,
ordered by severity.  The lowest viewable severity is set with the
snapshot severity object.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmSnapshotEntry row .1.3.6.1.4.1.637.61.1.3.22.1

Entry for asamAlarmSnapshotTable.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmSnapshotIndex

Column	Syntax	OID
asamAlarmSnapshotIndexmandatory Index for an Alarm Snapshot Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.22.1.1
asamAlarmSnapshotTypemandatory This object defines the type of the alarms in this entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	AsamAlarmType Type Constraints: range: 1..65535	.1.3.6.1.4.1.637.61.1.3.22.1.2
asamAlarmSnapshotStatusmandatory This object defines the status of alarms in an alarm type at the time the snapshot was taken. The alarms are represented in a bitmap with the following bitpositions : 1 NoDefect 2 AlarmNumber 1 …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.22.1.3
asamAlarmSnapshotIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.22.1.4
asamAlarmSnapshotIndex2mandatory This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.22.1.5
asamAlarmSnapshotPtrobsolete This object is currently not used. In future releases this object will be used to point to additional information.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.22.1.6
asamAlarmSnapshotTimemandatory This object gives the time information in seconds when the entry was updated, respectively added. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: se…	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.22.1.7
asamAlarmSnapshotAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.22.1.8

This table is to log all reported alarms with a severity equal to
Indeterminate. The Logged records are ordered by time.
The latest Indeterminate reported alarm change is logged as the last
entry of this table.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmIndeterminateDeltaLogEntry row .1.3.6.1.4.1.637.61.1.3.46.1

Entry for the Indeterminate Delta Log Table.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmIndeterminateDeltaLogIndex

Column	Syntax	OID
asamAlarmIndeterminateDeltaLogIndexmandatory Index for an Indeterminate Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.46.1.1
asamAlarmIndeterminateDeltaLogAlarmIdmandatory This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents the type and the second (rightmost) part the alarm number. Th…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.46.1.2
asamAlarmIndeterminateDeltaLogAlarmStatemandatory This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: …	AsamAlarmStateType Type Values: 1 active 2 nonActive	.1.3.6.1.4.1.637.61.1.3.46.1.3
asamAlarmIndeterminateDeltaLogIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.46.1.4
asamAlarmIndeterminateDeltaLogIndex2mandatory This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.46.1.5
asamAlarmIndeterminateDeltaLogPtrobsolete This object is currently not used.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.46.1.6
asamAlarmIndeterminateDeltaLogTimemandatory This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.46.1.7
asamAlarmIndeterminateDeltaLogAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.46.1.8
asamAlarmIndeterminateDeltaLogBasicAlarmIdmandatory The meaning and use of this object depends on the value of the asamAlarmIndeterminateDeltaLogAlarmId. The following situations are possible: 1. asamAlarmIndeterminateDeltaLogAlarmId points to a …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.46.1.9

This table is to log all reported alarms with a severity equal to
Warning. The Logged records are ordered by time.
The latest Warning reported alarm change is logged as the last
entry of this table.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmWarningDeltaLogEntry row .1.3.6.1.4.1.637.61.1.3.53.1

Entry for the Warning Delta Log Table.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmWarningDeltaLogIndex

Column	Syntax	OID
asamAlarmWarningDeltaLogIndexmandatory Index for a Warning Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.53.1.1
asamAlarmWarningDeltaLogAlarmIdmandatory This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents the type and the second (rightmost) part the alarm number. Thi…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.53.1.2
asamAlarmWarningDeltaLogAlarmStatemandatory This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: …	AsamAlarmStateType Type Values: 1 active 2 nonActive	.1.3.6.1.4.1.637.61.1.3.53.1.3
asamAlarmWarningDeltaLogIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.53.1.4
asamAlarmWarningDeltaLogIndex2mandatory This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.53.1.5
asamAlarmWarningDeltaLogPtrobsolete This object is currently not used.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.53.1.6
asamAlarmWarningDeltaLogTimemandatory This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.53.1.7
asamAlarmWarningDeltaLogAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.53.1.8
asamAlarmWarningDeltaLogBasicAlarmIdmandatory The meaning and use of this object depends on the value of the asamAlarmWarningDeltaLogAlarmId. The following situations are possible: 1. asamAlarmWarningDeltaLogAlarmId points to a basic …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.53.1.9

This table is to log all reported alarms with a severity equal to
Minor. The Logged records are ordered by time.
The latest Minor reported alarm change is logged as the last
entry of this table.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmMinorDeltaLogEntry row .1.3.6.1.4.1.637.61.1.3.60.1

Entry for the Minor Delta Log Table.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmMinorDeltaLogIndex

Column	Syntax	OID
asamAlarmMinorDeltaLogIndexmandatory Index for a Minor Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.60.1.1
asamAlarmMinorDeltaLogAlarmIdmandatory This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents the type and the second (rightmost) part the alarm number. Thi…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.60.1.2
asamAlarmMinorDeltaLogAlarmStatemandatory This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: …	AsamAlarmStateType Type Values: 1 active 2 nonActive	.1.3.6.1.4.1.637.61.1.3.60.1.3
asamAlarmMinorDeltaLogIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.60.1.4
asamAlarmMinorDeltaLogIndex2mandatory This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.60.1.5
asamAlarmMinorDeltaLogPtrobsolete This object is currently not used.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.60.1.6
asamAlarmMinorDeltaLogTimemandatory This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.60.1.7
asamAlarmMinorDeltaLogAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.60.1.8
asamAlarmMinorDeltaLogBasicAlarmIdmandatory The meaning and use of this object depends on the value of the asamAlarmMinorDeltaLogAlarmId. The following situations are possible: 1. asamAlarmMinorDeltaLogAlarmId points to a basic al…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.60.1.9

This table is to log all reported alarms with a severity equal to
Major. The Logged records are ordered by time.
The latest Major reported alarm change is logged as the last
entry of this table.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmMajorDeltaLogEntry row .1.3.6.1.4.1.637.61.1.3.67.1

Entry for the Major Delta Log Table.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmMajorDeltaLogIndex

Column	Syntax	OID
asamAlarmMajorDeltaLogIndexmandatory Index for a Major Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.67.1.1
asamAlarmMajorDeltaLogAlarmIdmandatory This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents the type and the second (rightmost) part the alarm number. Thi…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.67.1.2
asamAlarmMajorDeltaLogAlarmStatemandatory This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: …	AsamAlarmStateType Type Values: 1 active 2 nonActive	.1.3.6.1.4.1.637.61.1.3.67.1.3
asamAlarmMajorDeltaLogIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.67.1.4
asamAlarmMajorDeltaLogIndex2mandatory This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.67.1.5
asamAlarmMajorDeltaLogPtrobsolete This object is currently not used.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.67.1.6
asamAlarmMajorDeltaLogTimemandatory This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.67.1.7
asamAlarmMajorDeltaLogAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.67.1.8
asamAlarmMajorDeltaLogBasicAlarmIdmandatory The meaning and use of this object depends on the value of the asamAlarmMajorDeltaLogAlarmId. The following situations are possible: 1. asamAlarmMajorDeltaLogAlarmId points to a basic alarm. …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.67.1.9

This table is to log all reported alarms with a severity equal to
Critical. The Logged records are ordered by time.
The latest Critical reported alarm change is logged as the last
entry of this table.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmCriticalDeltaLogEntry row .1.3.6.1.4.1.637.61.1.3.74.1

Entry for the Critical Delta Log Table.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmCriticalDeltaLogIndex

Column	Syntax	OID
asamAlarmCriticalDeltaLogIndexmandatory Index for a Critical Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.74.1.1
asamAlarmCriticalDeltaLogAlarmIdmandatory This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents the type and the second (rightmost) part the alarm number. Thi…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.74.1.2
asamAlarmCriticalDeltaLogAlarmStatemandatory This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: …	AsamAlarmStateType Type Values: 1 active 2 nonActive	.1.3.6.1.4.1.637.61.1.3.74.1.3
asamAlarmCriticalDeltaLogIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.74.1.4
asamAlarmCriticalDeltaLogIndex2mandatory This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.74.1.5
asamAlarmCriticalDeltaLogPtrobsolete This object is currently not used.	ObjectIdentifier	.1.3.6.1.4.1.637.61.1.3.74.1.6
asamAlarmCriticalDeltaLogTimemandatory This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.74.1.7
asamAlarmCriticalDeltaLogAddInfomandatory This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.74.1.8
asamAlarmCriticalDeltaLogBasicAlarmIdmandatory The meaning and use of this object depends on the value of the asamAlarmCriticalDeltaLogAlarmId. The following situations are possible: 1. asamAlarmCriticalDeltaLogAlarmId points to a basic alar…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.74.1.9

Static table, representing the alarm filters inside the ASAM.
          
ALCATEL NOTE:
SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmFilterEntry row .1.3.6.1.4.1.637.61.1.3.76.1

Entry of the asamAlarmFilterTable.
Each row in the table contains management infornation applicable
to a specific alarm filter inside the ASAM.
ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmFilterType asamAlarmFilterNumber

Column	Syntax	OID
asamAlarmFilterTypemandatory Index in the asamAlarmFilterTable. This object is used to define the type of the considered alarm filter. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -	Enumerationr/w Enumerated Values: 1 temporal 2 spatial	.1.3.6.1.4.1.637.61.1.3.76.1.1
asamAlarmFilterNumbermandatory Index in the asamAlarmFilterTable. This index, together with asamAlarmFilterType, uniquely identifies the considered alarm filter within the asamAlarmFilterTable. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA…	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.637.61.1.3.76.1.2
asamAlarmFilterBasicAlarmIdmandatory The value of this object corresponds to the unique identifica- tion of the basic alarm related to the considered alarm filter. Each alarm filter in the ASAM is related to exact one basic alarm. The interpretation of thi…	Integer32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.76.1.3
asamAlarmFilterStatusmandatory This object is used by the operator to activate/deactivate a configured alarm filter. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: -	Enumerationr/w Enumerated Values: 1 notInUse 2 inUse	.1.3.6.1.4.1.637.61.1.3.76.1.4
asamAlarmFilterThresholdmandatory This object is used by the operator to specify the threshold value of the considered alarm filter. This value must be greater than 1 in order to make sense. The meaning of this object depends on the alarm…	Integer32r/w Constraints: range: 2-65535	.1.3.6.1.4.1.637.61.1.3.76.1.5
asamAlarmFilterWindowmandatory This object is used by the operator to specify the duration (number of seconds) of the filtering window. This object only makes sense when the considered alarm filter is a temporal filter (not relevant in case of a spa…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.637.61.1.3.76.1.6

This table is used to retrieve all the reported alarms by filters.
For each alarm, there is an entry. Each entry includes the detailed informations for this alarm.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above

asamAlarmQueryEntry row .1.3.6.1.4.1.637.61.1.3.78.1

Entry for the alarm query table. Each row in the table contains the detailed
information and status for each alarm.

ALCATEL NOTE:
SUPPORT: YES

Indexes

asamAlarmQueryAlarmId asamAlarmQuerySeverity asamAlarmQueryServAff asamAlarmQueryAid

Column	Syntax	OID
asamAlarmQueryAlarmIdmandatory This is the alarm identification. It's a 32bit integer and the scheme is described as following: ==================================== | bit31 ~ bit16 | | bit15 ~ bit0 | | alarm type | + | alarm number | ==========…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.78.1.1
asamAlarmQueryAidmandatory This reflects the alarm index. If the operator wants to show the specific alarm, it stands for the alarm index1 defined in alarm table. If the operator wants to show all the alarms, it is 0. ALCATEL NOTE…	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.78.1.2
asamAlarmQuerySeveritymandatory This reflects the severity level of the last raised or cleared alarm. This severity may be indeterminate, warning, minor, major critical and all. 0-all level, 1-indeterminate, 2-warning, 3-minor, 4-major, 5-criti…	AsamAlarmSeverityType Type Values: 0 alllevel 1 indeterminate 2 warning 3 minor 4 major 5 critical 6 ignore	.1.3.6.1.4.1.637.61.1.3.78.1.3
asamAlarmQueryServAffmandatory This reflects the sevice affecting or not in query alarm filter. 0-all affecting, 1-service-affecting, 2-not service affecting ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0-2 PERSIST: NO DEF…	AsamAlarmServAffType Type Values: 0 allAffecting 1 serviceAffecting 2 notServiceAffecting	.1.3.6.1.4.1.637.61.1.3.78.1.4
asamAlarmQueryTypemandatory This defined the alarm type. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	AsamAlarmType Type Constraints: range: 1..65535	.1.3.6.1.4.1.637.61.1.3.78.1.5
asamAlarmQueryLocationmandatory This object is used in alarm location. It is only suitable for various DSL alarms 1-near-end, 2-far-end, 3-middle-end, 4-line, 5-null ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSI…	AsamAlarmLocation Type Values: 0 nearend 1 farend 2 middleend 3 line 4 nullend	.1.3.6.1.4.1.637.61.1.3.78.1.6
asamAlarmQueryDirectionmandatory This object is used in alarm direction. It is only suitable for various DSL alarms. 1-received, 2-transmit, 3-null ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALU…	AsamAlarmDirection Type Values: 0 received 1 transmit 2 null	.1.3.6.1.4.1.637.61.1.3.78.1.7
asamAlarmQueryTimemandatory This object gives the time in seconds when the last alarm has changed state (either raised or cleared). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNI…	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.3.78.1.8
asamAlarmQueryAidInfomandatory This object is used to show AID parameter in string ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.78.1.9
asamAlarmQueryInfomandatory This object is used to keep some additional information about the queried alarm. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.637.61.1.3.78.1.10
asamAlarmQueryIndex1mandatory This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition, refer to the Alarm Definition document. ALCATEL NOTE: …	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.78.1.11
asamAlarmQueryIndex2mandatory This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.637.61.1.3.78.1.12