ARICENT-VLAN-MIB Table View

Table containing the port type information.

dot1qFutureVlanPortEntry row .1.3.6.1.4.1.2076.65.1.10.1

Entry indicating the type of the port.

Indexes

dot1qFutureVlanPort

Column	Syntax	OID
dot1qFutureVlanPort The port number of the port for which this entry applies.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2076.65.1.10.1.1
dot1qFutureVlanPortType The type of the port is by default hybrid port. When configured as access port, the port can accept and send only untagged frames. When configured as a trunk port, port is added as member of all the existing VLANs an…	Enumerationr/w Enumerated Values: 1 accessPort 2 trunkPort 3 hybridPort	.1.3.6.1.4.1.2076.65.1.10.1.2
dot1qFutureVlanPortMacBasedClassification This Object is used to explicitly enable/disable the MAC based classification on port. This can be independently set without any dependency in available configuration of dot1qFutureVlanMacBasedOnAllPorts.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.65.1.10.1.3
dot1qFutureVlanPortPortProtoBasedClassification This Object is used to explicitly enable/disable the port and protocol classification on port. This can be independently set without any dependency in available configuration of dot1qFutureVlanPortProtoBasedOnAllPorts.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.65.1.10.1.4
dot1qFutureVlanFilteringUtilityCriteria Based on this object, learning on a port is decided. If default filtering utility criteria is selected on a port, then learning of source MAC from a received packet on that port will be done only if there…	Enumerationr/w Enumerated Values: 1 default 2 enhanced	.1.3.6.1.4.1.2076.65.1.10.1.5
dot1qFutureVlanPortProtected The Split Horizon property of the port. If set to true, frames that are received on any other port that has the same property set to true, will not be forwarded on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.65.1.10.1.6
dot1qFutureVlanPortSubnetBasedClassification This Object is used to explicitly enable/disable the subnet based VLAN Classification on port. This can be independently set without any dependency in available configuration of dot1qFutureVlanSubnetBasedOnAllPorts. T…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.65.1.10.1.7
dot1qFutureVlanPortUnicastMacLearning A truth value indicating the unicast MAC learning enabled/disabled status for this port. When Unicast Mac Learning is disabled, no unicast MAC entry will be learnt on this port. When MAC learning is enabled, unicast M…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.65.1.10.1.8
dot1qFutureVlanPortIngressEtherType In Customer Bridge mode, this object indicates the primary C-VLAN tag ether type used for the packets received on this port. Packets received on a port are considered tagged, when the packet ether type matches with th…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2076.65.1.10.1.9
dot1qFutureVlanPortEgressEtherType In Customer Bridge Mode, this object indicates the ether type of the C-VLAN tag that has to be applied for all the outgoing packets on this port. If a valid value is in this object, all the packets which are outgoing on…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2076.65.1.10.1.10
dot1qFutureVlanPortEgressTPIDType This object defines the Egress TPID type for a Port. If the value is portbased(1) the egress TPID of the packet is selected from Egress Port Table. When the value is vlanbased(2), the Egress TPID is selec…	Enumerationr/w Enumerated Values: 1 portbased 2 vlanbased	.1.3.6.1.4.1.2076.65.1.10.1.11
dot1qFutureVlanPortAllowableTPID1 This object indicates the secondary ether type that is allowable for a port. The configurable values for this object are either 0x8100 or 0x88a8. Setting this MIB object is applicable only for hardware. …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.65.1.10.1.12
dot1qFutureVlanPortAllowableTPID2 This object indicates the standard ether type that is allowable for a port. The configurable value for this object is Q-in-Q EtherType [0x9100]. Setting this MIB object is applicable only for hardware. Wh…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.65.1.10.1.13
dot1qFutureVlanPortAllowableTPID3 This object indicates the additional user defined ether type that is allowable for a port. The value for this object is set by the dot1qFutureVlanUserDefinedTPID MIB. Setting this MIB object is applicable…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.65.1.10.1.14
dot1qFutureVlanPortUnicastMacSecType This object identifies the MA Table Address Type for this port sav - security is sav, strict is FALSE Only unknown MAC is treated as violation on all security configured ports. shv - security …	Enumerationr/w Enumerated Values: 1 sav 2 shv 3 off	.1.3.6.1.4.1.2076.65.1.10.1.15
dot1qFuturePortPacketReflectionStatus Port Packet Reflection feature allows switching of packets received on an ingress port back on the same port on which packet was received, if the MAC Destination Address is on the same port. The default behavior of th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.65.1.10.1.16
dot1qFutureVlanPortProtectedStatic The static Split Horizon property of the port. If set to true, frames that are received on any other port that has the same property set to true will not be forwarded on this port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.65.1.10.1.17

A table that contains information on VLAN-MAC address 
mapping.

dot1qFutureVlanPortMacMapEntry row .1.3.6.1.4.1.2076.65.1.11.1

This object specifies the entry that contains VLAN-MAC address mapping.

Indexes

dot1qFutureVlanPort dot1qFutureVlanPortMacMapAddr

Column	Syntax	OID
dot1qFutureVlanPortMacMapAddr This object specifies the MAC address for which the VLAN mapping is present in the entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.65.1.11.1.1
dot1qFutureVlanPortMacMapVid This object specifies the VLAN to which the MAC address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2076.65.1.11.1.2
dot1qFutureVlanPortMacMapName This object specifies the name given to the mac-VLAN entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2076.65.1.11.1.3
dot1qFutureVlanPortMacMapMcastBcastOption Configurable option for discarding/allowing Multicast/Broadcast untagged frames. The value allow (1) indicates that Multicast/Broadcast frames with source MAC address as in the MAC VLAN entry will be dropped if MAC base…	Enumerationr/w Enumerated Values: 1 allow 2 suppress	.1.3.6.1.4.1.2076.65.1.11.1.4
dot1qFutureVlanPortMacMapRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.65.1.11.1.5

This table contains information about the filtering database identifier
(FID) used by VLAN's to make forwarding decisions. VLAN's can be mapped 
to use the same FID to share filtering information among them. This will
cause the mapped VLAN's to operate in shared VLAN learning (SVL) mode.
VLAN's mapped to a unique FID will operate in independent VLAN learning
mode (IVL). A SET operation on this table is allowed only when 
dot1qFutureVlanLearningMode is hybrid. By default, all VLAN's will be 
mapped to the FID equal to their VLAN id when 
dot1qFutureVlanHybridTypeDefault is IVL. If the value of 
dot1qFutureVlanHybridTypeDefault is SVL, all VLAN's are mapped to 
filtering database id 1.

dot1qFutureVlanFidMapEntry row .1.3.6.1.4.1.2076.65.1.12.1

Entry mapping VlanId to Filtering database id.

Indexes

dot1qFutureVlanIndex

Column	Syntax	OID
dot1qFutureVlanIndex VLAN ID for which filtering database information is available.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.2076.65.1.12.1.1
dot1qFutureVlanFid This object specifies the filtering database id (FID) that will be used by the VLAN.	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2076.65.1.12.1.2

The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN.

dot1qFutureVlanCounterEntry row .1.3.6.1.4.1.2076.65.1.16.1

This object specifies the entry contains the VLAN statistics.

Indexes

dot1qFutureVlanIndex

Column	Syntax	OID
dot1qFutureVlanCounterRxUcast This object specifies the number of unicast packets received in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.1
dot1qFutureVlanCounterRxMcastBcast This object specifies the number of multicast/broadcast packets received in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.2
dot1qFutureVlanCounterTxUnknUcast This object specifies the number of unknown unicast packets flooded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.3
dot1qFutureVlanCounterTxUcast This object specifies the number of known unicast packets forwarded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.4
dot1qFutureVlanCounterTxBcast This object specifies the number of broadcast packets forwarded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.5
dot1qFutureVlanCounterRxFrames This object displays the total number of unicast, multicast and broadcast packets received in the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.6
dot1qFutureVlanCounterRxBytes This object displays the total number of unicast, multicast and broadcast bytes received in the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.7
dot1qFutureVlanCounterTxFrames This object displays the total number of unicast, multicast and broadcast packets transmitted by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.8
dot1qFutureVlanCounterTxBytes This object displays the total number of unicast, multicast and broadcast bytes transmitted by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.9
dot1qFutureVlanCounterDiscardFrames This object displays the number of packets dropped by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.10
dot1qFutureVlanCounterDiscardBytes This object displays the number of bytes dropped by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.16.1.11
dot1qFutureVlanCounterStatus A truth value indicating the statistics collection is enabled/disabled for this VLAN. When statistics collection is set to disabled, VLAN stops collecting statistics on this specific VLAN. When statistics…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.65.1.16.1.12

A table containing per VLAN Unicast MAC address control information. 
The control information includes the status of unicast MAC address 
learning as well as restricting the number of unique entries learnt to 
a specified limit for the specified VLAN.

dot1qFutureVlanUnicastMacControlEntry row .1.3.6.1.4.1.2076.65.1.17.1

Information controlling the number of distinct unicast MAC addresses
that can be learnt by a VLAN depending on whether learning is enabled
or disabled for the specified VLAN.

Indexes

dot1qFutureVlanIndex

Column	Syntax	OID
dot1qFutureVlanUnicastMacLimit The limiting value on the number of distinct unicast MAC addresses learnt in a VLAN. The lower limit and upper limit value that can be SET for this object is determined by the underlying hardware.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2076.65.1.17.1.1
dot1qFutureVlanAdminMacLearningStatus A truth value used to configure the unicast MAC learning admin status of the VLAN to be enabled (1) or disabled (2) or default (3). Configuring this object to default behavior is governed by value configured for dot1qF…	MacLearningStatusr/w Type Values: 1 enabled 2 disabled 3 default	.1.3.6.1.4.1.2076.65.1.17.1.2
dot1qFutureVlanOperMacLearningStatus A truth value indicating the unicast MAC learning enabled/disabled. Operational status for the specified VLAN. If the VLAN does not have any member port, then the MAC Learning Status for this VLAN will always be disable…	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.65.1.17.1.3
dot1qFutureVlanPortFdbFlush If this object is set as 'true', then all the dynamically learnt MAC addresses in specified VLAN will be removed. After flush, this object is set to 'false'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.65.1.17.1.4

An extension to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame.

dot1qFutureVlanTpFdbEntry row .1.3.6.1.4.1.2076.65.1.19.1

Information about the pseudowire on which MAC address was
learned

Indexes

No indexes recorded

Column	Syntax	OID
dot1qFutureVlanTpFdbPw Either the value '0', or the pseudowire number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the entry was le…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.65.1.19.1.1
dot1qTpOldFdbPort This object is useful for generating the source relearning trap. When a get is performed on this object, it returns the value of zero(0), so that ISS walk doesn't break. It indicates the port through which the MAC addr…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.65.1.19.1.2
dot1qFutureConnectionIdentifier This object is to associate the backbone MAC address of the peer backbone edge bridge with customer MAC addresses that can be reached through the peer backbone edge bridge.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.65.1.19.1.3

Wild card VLAN (Id : 0xFFF) static filtering information 
will be used for all VLANs for which there is no specific 
static filtering exists in dot1qStaticUnicastTable or 
dot1qStaticMulticastTable.

dot1qFutureVlanWildCardEntry row .1.3.6.1.4.1.2076.65.1.20.1

WildCard VLAN filtering information configured into device by
management specifying set of ports to which frames received
from any port and for any VLAN containing this wild card MAC
address as destination address and f…

Indexes

dot1qFutureVlanWildCardMacAddress

Column	Syntax	OID
dot1qFutureVlanWildCardMacAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Unicast, Multicast or Broadcast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.65.1.20.1.1
dot1qFutureVlanWildCardEgressPorts The set of ports to which frames received from a specific port and destined for dot1qFutureVlanWildCardMacAddress address must be forwarded, if there is no specific static filtering entry exist for this MAC.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.2076.65.1.20.1.2
dot1qFutureVlanWildCardRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.65.1.20.1.3

A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only.

dot1qFutureStaticUnicastExtnEntry row .1.3.6.1.4.1.2076.65.1.21.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…

Indexes

No indexes recorded

Column	Syntax	OID
dot1qFutureStaticConnectionIdentifier This object is to associate the backbone MAC address of the peer backbone edge bridge with customer MAC addresses that can be reached through the peer backbone edge bridge.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.65.1.21.1.1

Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
In case of BCM, the dot1qFutureVlanPort index should always be 0 since
BCM supports Subnet based VLAN globally (not on per port).

dot1qFutureVlanPortSubnetMapEntry row .1.3.6.1.4.1.2076.65.1.25.1

This object specifies an entry that contains VLAN-Subnet address mapping.

Indexes

dot1qFutureVlanPort dot1qFutureVlanPortSubnetMapAddr

Column	Syntax	OID
dot1qFutureVlanPortSubnetMapAddr This object specifies the the source IP-Subnet address for which the VLAN mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.65.1.25.1.1
dot1qFutureVlanPortSubnetMapVid This object specifies the VLAN to which the source IP-Subnet address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2076.65.1.25.1.2
dot1qFutureVlanPortSubnetMapARPOption Configurable option for discarding/allowing ARP Untagged frames on the VLAN. The value allow (1) indicates that ARP frames with source IP-subnet address matching the dot1qFutureVlanPortSubnetMapEntry will be classifie…	Enumerationr/w Enumerated Values: 1 allow 2 suppress	.1.3.6.1.4.1.2076.65.1.25.1.3
dot1qFutureVlanPortSubnetMapRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.65.1.25.1.4

An extension to dot1qVlanStaticTable VLAN table.

dot1qFutureStVlanExtEntry row .1.3.6.1.4.1.2076.65.1.29.1

This object specifies each entry which specifies the VLAN
configuration done for a given VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
dot1qFutureStVlanType Indicates the VLAN type of the static VLAN. This object is being retained for backward compatibility of OID's of the remaining objects in this table.	Enumeration Enumerated Values: 1 normal	.1.3.6.1.4.1.2076.65.1.29.1.1
dot1qFutureStVlanVid This object is being retained for backward compatibility of OID's of the remaining objects in this table.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2076.65.1.29.1.2
dot1qFutureStVlanEgressEthertype This object sets the value for the Egress Ether type of a packet. The value set for this object is applicable for a port present in this VLAN only when the value of dot1qFutureVlanPortEgressTPIDType is set to VLANbased(…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.65.1.29.1.3

Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.

dot1qFutureVlanPortSubnetMapExtEntry row .1.3.6.1.4.1.2076.65.1.30.1

This object specifies the entry that contains VLAN-Subnet address mapping.

Indexes

dot1qFutureVlanPort dot1qFutureVlanPortSubnetMapExtAddr dot1qFutureVlanPortSubnetMapExtMask

Column	Syntax	OID
dot1qFutureVlanPortSubnetMapExtAddr This object specifies the Source IP address for which the VLAN mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.65.1.30.1.1
dot1qFutureVlanPortSubnetMapExtMask This object specifies the Subnet Mask for which the VLAN mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.65.1.30.1.2
dot1qFutureVlanPortSubnetMapExtVid This object specifies the VLAN to which the Source IP-Subnet address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2076.65.1.30.1.3
dot1qFutureVlanPortSubnetMapExtARPOption This object specifies the configurable option for discarding/allowing ARP untagged frames on the VLAN. The value allow (1) indicates that ARP frames with source IP-subnet address matching the dot1qFutureVlanPortSubnetMa…	Enumerationr/w Enumerated Values: 1 allow 2 suppress	.1.3.6.1.4.1.2076.65.1.30.1.4
dot1qFutureVlanPortSubnetMapExtRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.65.1.30.1.5

This table contains the Loopback Status for all VLANs.

dot1qFutureVlanLoopbackEntry row .1.3.6.1.4.1.2076.65.1.33.1

This entry contains the VLAN loopback Status.

Indexes

dot1qFutureVlanIndex

Column	Syntax	OID
dot1qFutureVlanLoopbackStatus This object specifies the loopback status for the VLAN. When Loopback is enabled, all data packets received in the VLAN will be sent back in the same port from which the packets are received.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.65.1.33.1.1