ARICENT-RFC2544-MIB Table View

This table contains all the global configurations of RFC2544
per virtual context of the router.

fs2544ContextEntry row .1.3.6.1.4.1.29601.2.105.1.1.1

This object specifies an entry of virtual context RFC2544 Global
parameters.

Indexes

fs2544ContextId

Column	Syntax	OID
fs2544ContextId This object specifies an unique identifier to identify the virtual context.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.1.1.1.1
fs2544ContextName This object specifies context-name for the virtual context.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.29601.2.105.1.1.1.2
fs2544ContextSystemControl This object specifies the administrative system control status of RFC2544 module. The value 'start' (1) indicates that all resources required by RFC2544 module should be allocated and RFC2544 should be s…	Enumerationr/w Enumerated Values: 1 start 2 shutdown	.1.3.6.1.4.1.29601.2.105.1.1.1.3
fs2544ContextModuleStatus This object sepcifies the administrative module status of RFC2544 module. This enables or disables RFC2544 in the system. A value of 'enabled' (1) indicates that RFC2544 is enabled in the virtaul contex…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.105.1.1.1.4
fs2544ContextTraceOption This object is used to enable the trace statements in RFC2544 Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four byte integer, represents a level of Trace. …	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.105.1.1.1.5
fs2544ContextNumOfTestRunning This object specifies the number of test currently running in a virtual context.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.1.1.1.6
fs2544ContextTrapStatus This object is used to enable or disable the transmission of TRAP notification messages. By default this object is set to enable for all virtual context.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.105.1.1.1.7

This table contains Service Level Agreement configurations.

fs2544SlaEntry row .1.3.6.1.4.1.29601.2.105.2.1.1

This entry contains information about a particular SLA
Configuration.

Indexes

fs2544ContextId fs2544SlaId

Column	Syntax	OID
fs2544SlaId This object specifies the RFC2544 Service Level Agreement Identifier. This is a free running index used to identify a SLA.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.29601.2.105.2.1.1.1
fs2544SlaMEG This object specifies the Maintenance Entity Group (MEG). Internally this object refers to MIB object dot1agCfmMdIndex of ECFM 802.1ag standard.The value zero(0) is used for unmapping MEG from Sla.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.105.2.1.1.2
fs2544SlaME This object specifies the Maintenance Entity (ME) Internally this object refers to MIB object dot1agCfmMaIndex of ECFM 802.1ag standard. The value zero(0) is used for unmapping ME from Sla.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.105.2.1.1.3
fs2544SlaMEP This object specifies the Maintenance Association End Point (MEP). Internally this object refers to MIB object dot1agCfmMepIdentifier of ECFM 802.1ag standard.The value zero(0) is used for unmapping MEP from Sla.	Unsigned32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.29601.2.105.2.1.1.4
fs2544SlaTrafficProfileId This object specifies the RFC2544 Traffic Profile Identifier that is to be associated with SLA.The value zero(0) is used for unmapping traffic profile from Sla.	Unsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.29601.2.105.2.1.1.5
fs2544SlaSacId This object specifies the RFC2544 SAC Identifier that is to be associated with the SLA.The value zero(0) is used for unmapping Sac from Sla.	Unsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.29601.2.105.2.1.1.6
fs2544SlaTestStatus This object specifies the RFC2544 SLA test status. It is used to start or stop the test.	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.29601.2.105.2.1.1.7
fs2544SlaCurrentTestState This object specifies the current test state of the SLA.	Enumeration Enumerated Values: 1 notInitiated 2 inProgress 3 completed 4 aborted	.1.3.6.1.4.1.29601.2.105.2.1.1.8
fs2544SlaTestStartTime This object specifies the start time of the benchmark test in RFC2544 .	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.29601.2.105.2.1.1.9
fs2544SlaTestEndTime This object specifies the end time of the benchmark test in RFC2544 .	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.29601.2.105.2.1.1.10
fs2544SlaRowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the fs2544SlaRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.105.2.1.1.11

This table contains RFC2544 Test profile Table configurations.

fs2544TrafficProfileEntry row .1.3.6.1.4.1.29601.2.105.3.1.1

This entry contains information about a particular test profile
Configuration.

Indexes

fs2544ContextId fs2544TrafficProfileId

Column	Syntax	OID
fs2544TrafficProfileId This object specifies the RFC2544 Traffic Profile Identifier. This is a free running index used to identify a Benchmark Test. Traffic Profile cannot be deleted when it is associated with a SLA.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.29601.2.105.3.1.1.1
fs2544TrafficProfileName This object specifies the name of the RFC2544 profile. By default, the test profile name will be constructed by appending test profile ID to the string profile. Example: Default test profile name for a…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.29601.2.105.3.1.1.2
fs2544TrafficProfileSeqNoCheck This object is used to enable or disable the validation of sequence number in received frames. Enable - Sequence number is validated for the received frames and this provides the report of th…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.105.3.1.1.3
fs2544TrafficProfileDwellTime This object specifies the number of seconds to wait after each trail for the system to settle before reading the statistics from hardware.	Integer32r/w Constraints: range: 5-60	.1.3.6.1.4.1.29601.2.105.3.1.1.4
fs2544TrafficProfileFrameSize This object specifies the frame size used for each benchmark test. The configurable frame sizes are 64,128,256,512,1024,1280 and 1518. By default the test is done for all frame sizes (64,128,256,512,1024,1280,1518)	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.29601.2.105.3.1.1.5
fs2544TrafficProfilePCP This object specifies the PCP (Priority Code Point) that is to be inserted in the generated test frames. PCP value is inserted only if the Mep Type is Vlan based Mep.	IEEE8021-TC-MIBIEEE8021PriorityCodePointr/w Type Values: 1 codePoint8p0d 2 codePoint7p1d 3 codePoint6p2d 4 codePoint5p3d	.1.3.6.1.4.1.29601.2.105.3.1.1.6
fs2544TrafficProfileThTestStatus This object enables or disables throughput test . Throughput test - Measures the maximum rate at which none of the offered frames are dropped on the device. If TRUE, then the throughput test will be ena…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.105.3.1.1.7
fs2544TrafficProfileFlTestStatus This object enables or disables the Frame Loss Rate test . Frame Loss rate - Measures the performance of a network device in overloaded state. If TRUE, then the Frame Loss Rate test will be enabled. If F…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.105.3.1.1.8
fs2544TrafficProfileLaTestStatus This object enables or Disables the Latency test Latency test - Measures the time taken by a test frame to travel through a network device If TRUE, then the Latency test will be enabled. If FALSE, then t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.105.3.1.1.9
fs2544TrafficProfileBbTestStatus This object enables or Disbales the Back-To-Back Frame test. Back-To-Back Frame Test - Measures the buffering capacity of a device. If TRUE, then the Back-To-Back Frame test will be enabled. If FALSE, t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.105.3.1.1.10
fs2544TrafficProfileThTrialDuration This object specifies the duration of each trails in seconds for Throughput test.	secondsUnsigned32r/w Constraints: range: 10-1800	.1.3.6.1.4.1.29601.2.105.3.1.1.11
fs2544TrafficProfileThMaxRate This object specifies the maximum rate for the Throughput test.It is specified in % of the link's bandwidth. The default value is 100% of the link speed	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.3.1.1.12
fs2544TrafficProfileThMinRate This object specifies the minimum rate for the Throughput test. It is specified in % of the link's bandwidth. The default value is 80% of the link speed	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.3.1.1.13
fs2544TrafficProfileLaTrialDuration This object specifies the trial duration for Latency(Delay Measurement)Test in seconds.	secondsUnsigned32r/w Constraints: range: 10-1800	.1.3.6.1.4.1.29601.2.105.3.1.1.14
fs2544TrafficProfileLaDelayMeasureInterval This object specifies the number of seconds between each delay measurement.	secondsUnsigned32r/w Constraints: range: 1-60	.1.3.6.1.4.1.29601.2.105.3.1.1.15
fs2544TrafficProfileFlTrialDuration This object specifies the duration of the trail for Frame Loss Test in seconds.	secondsUnsigned32r/w Constraints: range: 10-1800	.1.3.6.1.4.1.29601.2.105.3.1.1.16
fs2544TrafficProfileFlMaxRate This object specifies the maximum rate for the Frame Loss test. It is specified in % of the link's bandwidth. The default value is 100% of the link speed	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.3.1.1.17
fs2544TrafficProfileFlMinRate This object specifies the minimum rate for the Frame Loss test. It is specified in % of the link's bandwidth. The default value is 80% of the link speed	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.3.1.1.18
fs2544TrafficProfileFlRateStep This object specifies the granularity between the minimum and maximum rates defined for Frame Loss Test. It is specified in % of the link's bandwidth . The default value is 10% of the link speed	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.3.1.1.19
fs2544TrafficProfileBbTrialDuration This object specifies the trail duration for Back-To-Back test in seconds.	millisecondsUnsigned32r/w Constraints: range: 100-10000	.1.3.6.1.4.1.29601.2.105.3.1.1.20
fs2544TrafficProfileBbTrialCount This object specifies the number of times the Back-To-Back test is to be executed.	Unsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.29601.2.105.3.1.1.21
fs2544TrafficProfileThRateStep This object specifies the granularity between the minimum and maximum rates defined for Throughput Test. It is specified in % of the link's bandwidth . The default value is 10% of the link speed	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.3.1.1.22
fs2544TrafficProfileRowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the fs2544TrafficProfileRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.105.3.1.1.23

This table contains RFC2544 Service Acceptance Criteria
Table configurations.

fs2544SacEntry row .1.3.6.1.4.1.29601.2.105.4.1.1

This entry contains information about Service
Acceptance Criteria configuration.

Indexes

fs2544ContextId fs2544SacId

Column	Syntax	OID
fs2544SacId This object specifies the RFC2544 SAC Identifier. This is used to identify a particular SAC entry. Sac cannot be deleted when it is associated with a SLA.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.29601.2.105.4.1.1.1
fs2544SacThAllowedFrameLoss This object specifies the allowable frame loss in percentage for the Throughput test .	percentageUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.29601.2.105.4.1.1.2
fs2544SacLaAllowedFrameLoss This object specifies the allowable frame loss in percentage for latency test.	percentageUnsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.29601.2.105.4.1.1.3
fs2544SacFlAllowedFrameLoss This object specifies the allowable frame loss in percentage for Frame Loss Rate test.	percentageUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.29601.2.105.4.1.1.4
fs2544SacRowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the fs2544SacRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.105.4.1.1.5

This table contains the statistics of the benchmark test performed.

fs2544ReportStatsEntry row .1.3.6.1.4.1.29601.2.105.5.1.1

This entry specifies the statistics about a particular Test performed.

Indexes

fs2544ContextId fs2544SlaId fs2544ReportStatsFrameSize

Column	Syntax	OID
fs2544ReportStatsFrameSize This object specifies the frame size for which the test is performed.	Unsigned32 Constraints: range: 64-1518	.1.3.6.1.4.1.29601.2.105.5.1.1.1
fs2544ReportStatsThVerifiedBps This object specifies the verified throughput value.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.5.1.1.2
fs2544ReportStatsThResult This object specifies the throughput result.	Enumeration Enumerated Values: 1 pass 2 fail 3 notInitiated 4 aborted	.1.3.6.1.4.1.29601.2.105.5.1.1.3
fs2544ReportStatsLatencyMin This object specifies the Minimum delay measured.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.5.1.1.4
fs2544ReportStatsLatencyMax This object specifies the Maximum delay measured.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.5.1.1.5
fs2544ReportStatsLatencyMean This object specifies the Average delay measured.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.105.5.1.1.6
fs2544ReportStatsLatencyFailCount This object specifies the number of failures against each frame.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.105.5.1.1.7
fs2544ReportStatsLaIterationCalculated This object specifies the number of iterations used for calculation.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.105.5.1.1.8
fs2544ReportStatsLatencyResult This object specifies the Latency result.	Enumeration Enumerated Values: 1 pass 2 fail 3 notApplicable 4 aborted	.1.3.6.1.4.1.29601.2.105.5.1.1.9
fs2544ReportStatsFLossRate This object specifies the Frame Loss Rate observed during the test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.105.5.1.1.10
fs2544ReportStatsFLResult This object specifies the Frame Loss rate result.	Enumeration Enumerated Values: 1 pass 2 fail 3 notApplicable 4 aborted	.1.3.6.1.4.1.29601.2.105.5.1.1.11
fs2544ReportStatsBacktoBackBurstSize This object specifies the Back to Back frame test result.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.105.5.1.1.12