ARICENT-MIOSPFV3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
107

fsMIOspfv3Table

table
.1.3.6.1.4.1.29601.2.24.2 · 1 row entry · 18 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3Table' 
Information describing the parameters
of router's instances
fsMIOspfv3Entry row .1.3.6.1.4.1.29601.2.24.2.1
Information describing the parameters
of one of the router's instances
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfv3OverFlowState
Indicates whether router is in overflow state or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.24.2.1.1
fsMIOspfv3TraceLevel
This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Trace.
0x00000400 -- Packet Hex Dump Trace.…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.24.2.1.2
fsMIOspfv3ABRType
Different Types of ABRs supported
Enumerationr/w
Enumerated Values:
1standardABR
2ciscoABR
3ibmABR
 .1.3.6.1.4.1.29601.2.24.2.1.3
fsMIOspfv3NssaAsbrDefRtTrans
Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-Bit is set in the generated
Type-7 defau…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.2.1.4
fsMIOspfv3DefaultPassiveInterface
When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.24.2.1.5
fsMIOspfv3SpfDelay
The Delay at which routing calculation is carried after a
topology change.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.24.2.1.6
fsMIOspfv3SpfHoldTime
The minimum time between two consecutive SPF calculations.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.24.2.1.7
fsMIOspfv3RTStaggeringInterval
This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPFv3 operations. Refault value of
this object is equal to Hello Interval
Integer32r/w
Constraints:
range: 1000-2147483647
 .1.3.6.1.4.1.29601.2.24.2.1.8
fsMIOspfv3RestartStrictLsaChecking
Indicates if strict LSA checking is enabled for graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.24.2.1.9
fsMIOspfv3HelperSupport
The router's helper support for OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
fsMIOspfv3HelperSupport is indicated by bitmap.

This object is persist…
Bitsr/w
Enumerated Values:
0unknown
1softwareRestart
2swReloadUpgrade
3switchToRedundant
 .1.3.6.1.4.1.29601.2.24.2.1.10
fsMIOspfv3HelperGraceTimeLimit
Configured OSPFv3 graceful restart interval limit in helper side.
Time is configured in seconds. If this object is set to 0, then the
helper accepts the restarting router's grace period received from grace LSA.
This o…
Integer32r/w
Constraints:
range: 0-1800
 .1.3.6.1.4.1.29601.2.24.2.1.11
fsMIOspfv3RestartAckState
Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.

This object is persistent and when written
the entity SHOULD save the change t…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.2.1.12
fsMIOspfv3GraceLsaRetransmitCount
Number of retransmissions for unacknowledged GraceLSAs
Integer32r/w
Constraints:
range: 0-180
 .1.3.6.1.4.1.29601.2.24.2.1.13
fsMIOspfv3RestartReason
The router's restarter reason code of OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when written
the entity SHOULD save the change to…
Enumerationr/w
Enumerated Values:
0unknown
1softwareRestart
2swReloadUpgrade
3switchToRedundant
 .1.3.6.1.4.1.29601.2.24.2.1.14
fsMIOspfv3ExtTraceLevel
This object is used to define level of trace required for OSPFv3 GR.
Levels are defined as follows.
0x00000001 -- Restating router Trace.
0x00000002 -- Helper Trace.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.24.2.1.15
fsMIOspfv3SetTraps
This object is used to enable and disable specific
OSPFv3 traps. Currently the following are defined
0x00000000 - Traps are not enabled.
0x00000001 - Restarting router status changes
0x00000002 - Nieghbor Helper status…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.24.2.1.16
fsMIOspfv3BfdStatus
This object enables/disables BFD feature in OSPFv3.
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.2.1.17
fsMIOspfv3BfdAllIfState
This object enables/disables BFD for all OSPFv3 interfaces.
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring,
when the OSPFv3 neighbor state is FULL. Enabling this object
internally enables BFD for …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.2.1.18

fsMIOspfv3IfTable

table
.1.3.6.1.4.1.29601.2.24.3 · 1 row entry · 28 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3IfTable' 
The OSPFv3 Interface Table describes the  inter-
faces from the viewpoint of OSPFv3.
fsMIOspfv3IfEntry row .1.3.6.1.4.1.29601.2.24.3.1
The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.
Indexes
Column Syntax OID
fsMIOspfv3IfIndex
The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.24.3.1.1
fsMIOspfv3IfOperState
This gives the Operational Status of the Interface.
Enumeration
Enumerated Values:
1operup
2operdown
3loopback
4unloop
 .1.3.6.1.4.1.29601.2.24.3.1.2
fsMIOspfv3IfPassive
This object is used to make the inteface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.24.3.1.3
fsMIOspfv3IfNbrCount
This gives the Total number of Neighbour's through
that Interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.4
fsMIOspfv3IfAdjCount
This gives the Total number of Adjacencies through
that Interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.5
fsMIOspfv3IfHelloRcvd
This gives the Total number of Hello packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.6
fsMIOspfv3IfHelloTxed
This gives the Total number of Hello packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.7
fsMIOspfv3IfHelloDisd
This gives the Total number of Hello packets
discarded through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.8
fsMIOspfv3IfDdpRcvd
This gives the Total number of Ddp packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.9
fsMIOspfv3IfDdpTxed
This gives the Total number of Ddp packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.10
fsMIOspfv3IfDdpDisd
This gives the Total number of Ddp packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.11
fsMIOspfv3IfLrqRcvd
This gives the Total number of Lrq packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.12
fsMIOspfv3IfLrqTxed
This gives the Total number of Lrq packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.13
fsMIOspfv3IfLrqDisd
This gives the Total number of Lrq packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.14
fsMIOspfv3IfLsuRcvd
This gives the Total number of Lsu packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.15
fsMIOspfv3IfLsuTxed
This gives the Total number of Lsu packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.16
fsMIOspfv3IfLsuDisd
This gives the Total number of Lsu packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.17
fsMIOspfv3IfLakRcvd
This gives the Total number of Lak packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.18
fsMIOspfv3IfLakTxed
This gives the Total number of Lak packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.19
fsMIOspfv3IfLakDisd
This gives the Total number of Lak packets discarded
on that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.20
fsMIOspfv3IfContextId
A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon system
configuration. Default value is 0 which will be initialized
during bootup
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.24.3.1.21
fsMIOspfv3IfLinkLSASuppression
Specifies whether or not link LSA origination is
suppressed for networks other than broadcast or NBMA.
The object is set to value true (1) to suppress
the origination.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.24.3.1.22
fsMIOspfv3IfBfdState
This object enables/disables BFD in a specific OSPFv3 interface.
This object is set to be enabled internally for particular interface entry
when fsMIOspfv3BfdAllIfState is enabled.

If fsMIOspfv3BfdAllIfSt…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.3.1.23
fsMIOspfv3IfCryptoAuthType
This object specifies the SHA crypto authentication type to be used on the interface
Enumerationr/w
Enumerated Values:
1sha1
3sha256
4sha384
5sha512
6none
 .1.3.6.1.4.1.29601.2.24.3.1.24
fsMIOspfv3IfCryptoAuthMode
This object specifies the crypto authentication mode to be used on the interface
Enumerationr/w
Enumerated Values:
1full
2transition
3none
 .1.3.6.1.4.1.29601.2.24.3.1.25
fsMIOspfv3IfAuthTxed
This object specifies the total number of Authentication Trailer packets
transmitted on the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.26
fsMIOspfv3IfAuthRcvd
This object specifies the total number of Authentication Trailer packets
received on the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.27
fsMIOspfv3IfAuthDisd
This object specifies the Total number of Authentication Trailer packets
discarded on the interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.24.3.1.28

fsMIOspfv3RoutingTable

table
.1.3.6.1.4.1.29601.2.24.4 · 1 row entry · 10 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3RoutingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3RoutingTable' 
A table of routing information.
fsMIOspfv3RoutingEntry row .1.3.6.1.4.1.29601.2.24.4.1
The information regarding a single route.
Indexes
Column Syntax OID
fsMIOspfv3RouteDestType
The prefix type of fsMIOspfv3RouteDestType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.29601.2.24.4.1.1
fsMIOspfv3RouteDest
The Desitnation IPv6 Address of this route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.24.4.1.2
fsMIOspfv3RoutePfxLength
Indicates the prefix length of the destination Address.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.29601.2.24.4.1.3
fsMIOspfv3RouteNextHopType
The prefix type offsMIOspfv3RouteNextHopType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.29601.2.24.4.1.4
fsMIOspfv3RouteNextHop
Next Hop IPv6 Address for this route. For direct routes it has the
value ::0.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.24.4.1.5
fsMIOspfv3RouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
3type1External
4type2External
 .1.3.6.1.4.1.29601.2.24.4.1.6
fsMIOspfv3RouteAreaId
Area ID associated with the route
OSPF-MIBAreaID .1.3.6.1.4.1.29601.2.24.4.1.7
fsMIOspfv3RouteCost
It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedenc…
OSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.29601.2.24.4.1.8
fsMIOspfv3RouteType2Cost
Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the…
OSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.29601.2.24.4.1.9
fsMIOspfv3RouteInterfaceIndex
Interface Index associated with the route
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.29601.2.24.4.1.10

fsMIOspfv3AsExternalAggregationTable

table
.1.3.6.1.4.1.29601.2.24.5 · 1 row entry · 7 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3AsExternalAggregationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3AsExternalAggregationTable' 
Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated.
fsMIOspfv3AsExternalAggregationEntry row .1.3.6.1.4.1.29601.2.24.5.1
Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed.
Indexes
Column Syntax OID
fsMIOspfv3AsExternalAggregationNetType
The prefix type of fsMIOspfv3AsExternalAggregationNetType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.29601.2.24.5.1.1
fsMIOspfv3AsExternalAggregationNet
The IPv6 address of the Net indicated by
the range.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.24.5.1.2
fsMIOspfv3AsExternalAggregationPfxLength
The prefix length that pertains to the
range.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.29601.2.24.5.1.3
fsMIOspfv3AsExternalAggregationAreaId
Refer to description in fsMIOspfv3AsExternalAggregationEffect.
OSPF-MIBAreaID .1.3.6.1.4.1.29601.2.24.5.1.4
fsMIOspfv3AsExternalAggregationEffect
Indicates whether Type-5/Type-7 will be aggregated or not
generated for the specified range.
When set to 'allowAll' (3) and associated areaId is 0.0.0.0
aggregated Type-5 are generated for the specified range. In
addit…
Enumerationr/w
Enumerated Values:
1advertise
2doNotAdvertise
3allowAll
4denyAll
 .1.3.6.1.4.1.29601.2.24.5.1.5
fsMIOspfv3AsExternalAggregationTranslation
This when set to enabled, P Bit is set in
the generated Type-7 LSA. When set disabled
P Bit is clear in the generated Type-7 LSA
for the range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.5.1.6
fsMIOspfv3AsExternalAggregationStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.24.5.1.7

fsMIOspfv3BRRouteTable

table
.1.3.6.1.4.1.29601.2.24.6 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3BRRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3BRRouteTable' 
A table of routing information.
fsMIOspfv3BRRouteEntry row .1.3.6.1.4.1.29601.2.24.6.1
The information regarding a single route.
Indexes
Column Syntax OID
fsMIOspfv3BRRouteDest
Router Id of the destination router.
ABR/ASBR entries will have Router Id as
the destination network Id
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.29601.2.24.6.1.1
fsMIOspfv3BRRouteNextHopType
The prefix type of fsMIOspfv3BRRouteNextHopType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.29601.2.24.6.1.2
fsMIOspfv3BRRouteNextHop
Next Hop IPv6 Address for this route. For direct
routes it has the value ::0.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.24.6.1.3
fsMIOspfv3BRRouteDestType
Type of the route. The route can be ABR route
entry or ASBR route entry
Enumeration
Enumerated Values:
2areaBorder
3asBoundary
 .1.3.6.1.4.1.29601.2.24.6.1.4
fsMIOspfv3BRRouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
 .1.3.6.1.4.1.29601.2.24.6.1.5
fsMIOspfv3BRRouteAreaId
Area ID associated with the route
OSPF-MIBAreaID .1.3.6.1.4.1.29601.2.24.6.1.6
fsMIOspfv3BRRouteCost
The cost associated with the route
OSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.29601.2.24.6.1.7
fsMIOspfv3BRRouteInterfaceIndex
Interface Index associated with the route
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.24.6.1.8

fsMIOspfv3RedistRouteCfgTable

table
.1.3.6.1.4.1.29601.2.24.7 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3RedistRouteCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3RedistRouteCfgTable' 
A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.
fsMIOspfv3RedistRouteCfgEntry row .1.3.6.1.4.1.29601.2.24.7.1
Information describing the configuration of single route entry.
Indexes
Column Syntax OID
fsMIOspfv3RedistRouteDestType
The prefix type of fsMIOspfv3RedistRouteDestType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.29601.2.24.7.1.1
fsMIOspfv3RedistRouteDest
IPv6 Address of the Destination route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.24.7.1.2
fsMIOspfv3RedistRoutePfxLength
Prefix Length of the Destination route.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.29601.2.24.7.1.3
fsMIOspfv3RedistRouteMetric
The Metric value applied to the route before it is adv. into the
OSPFv3 Domain.
OSPF-MIBBigMetricr/w
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.29601.2.24.7.1.4
fsMIOspfv3RedistRouteMetricType
The Metric Type applied to the route before it is adv. into the
OSPFv3 Domain
Enumerationr/w
Enumerated Values:
3type1External
4type2External
 .1.3.6.1.4.1.29601.2.24.7.1.5
fsMIOspfv3RedistRouteTagType
The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the fsMIOspfv3RedistRouteTag
MIB has to be set with the Tag value neede…
Enumerationr/w
Enumerated Values:
1manual
2automatic
 .1.3.6.1.4.1.29601.2.24.7.1.6
fsMIOspfv3RedistRouteTag
The Route Tag in case the user configures a Manual option for
the tags.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.24.7.1.7
fsMIOspfv3RedistRouteStatus
The variable dispalys the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.24.7.1.8

fsMIOspfv3RRDRouteTable

table
.1.3.6.1.4.1.29601.2.24.8.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3RRDRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3RRDRouteTable' 
Describes RRDRoute Entry
fsMIOspfv3RRDRouteEntry row .1.3.6.1.4.1.29601.2.24.8.1.1.1
Information describing the RRDRoute
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfv3RRDStatus
This MIB object enables/disables OSPFv3 to participate in Route
Redistribution. If set to enabled, OSPFv3 will start advertising
the routes learned by other protocols. If set to disabled, OSPFv3
will stop redisbution…
OSPF-MIBStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.8.1.1.1.1
fsMIOspfv3RRDSrcProtoMask
The bit mask of source protocols from which routes are
imported to OSPFv3.

Bit 1, if set, indicates that local routes are
redistributed into OSPFv3. (value = 2)
if reset, indicates that local routes are…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.24.8.1.1.1.2
fsMIOspfv3RRDRouteMapName
Name Identifies the specified route-map
in the list of route-maps.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.29601.2.24.8.1.1.1.3

fsMIOspfv3DistInOutRouteMapTable

table
.1.3.6.1.4.1.29601.2.24.9.1 · 1 row entry · 4 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3DistInOutRouteMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3DistInOutRouteMapTable' 
A table describing the configuration of filtering for route map.
fsMIOspfv3DistInOutRouteMapEntry row .1.3.6.1.4.1.29601.2.24.9.1.1
Information describing the filtering configuration of single entry.
Indexes
Column Syntax OID
fsMIOspfv3DistInOutRouteMapName
Route map name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.29601.2.24.9.1.1.1
fsMIOspfv3DistInOutRouteMapType
Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.29601.2.24.9.1.1.2
fsMIOspfv3DistInOutRouteMapValue
Distance value ( this will be unused for distribute list )
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.29601.2.24.9.1.1.3
fsMIOspfv3DistInOutRouteMapRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.24.9.1.1.4

fsMIOspfv3PreferenceTable

table
.1.3.6.1.4.1.29601.2.24.10.1 · 1 row entry · 1 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3PreferenceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3PreferenceTable' 
Describes RRDRoute Entry
fsMIOspfv3PreferenceEntry row .1.3.6.1.4.1.29601.2.24.10.1.1
Information describing the RRDRoute
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfv3PreferenceValue
Preference value for OSPFv3 routes. Use '0' to set default value
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.24.10.1.1.1

fsMIOspfv3NeighborBfdTable

table
.1.3.6.1.4.1.29601.2.24.11.1 · 1 row entry · 1 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3NeighborBfdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3NeighborBfdTable' 
This table Contains neighbor entry for Bfd
fsMIOspfv3NeighborBfdEntry row .1.3.6.1.4.1.29601.2.24.11.1.1
This entry contains information describing Bfd neighbor state
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfv3NbrBfdState
This object specifies the Neighbor Bfd state. It is a read-only object.
It is be enabled internally only when BFD is
enabled for monitoring this neighbor IP path.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.24.11.1.1.1

fsMIOspfv3IfAuthTable

table
.1.3.6.1.4.1.29601.2.24.12 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3IfAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3IfAuthTable' 
This OSPF-V3 Interface Authentication Table describes the parameters
required for  cryptographic Authentication.
fsMIOspfv3IfAuthEntry row .1.3.6.1.4.1.29601.2.24.12.1
This object describes one Authentication Key from the viewpoint of OSPF-V3.
Indexes
Column Syntax OID
fsMIOspfv3IfAuthIfIndex
This object specifies the interface index of OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.24.12.1.1
fsMIOspfv3IfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF-V3 packet.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.24.12.1.2
fsMIOspfv3IfAuthKey
This object identifies the secret key which is used to create the
message digest appended to the OSPF-V3 packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.29601.2.24.12.1.3
fsMIOspfv3IfAuthKeyStartAccept
This object specifies the time at which the router starts Accepting packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.12.1.4
fsMIOspfv3IfAuthKeyStartGenerate
This object specifies the time at which the router starts generating packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.12.1.5
fsMIOspfv3IfAuthKeyStopGenerate
This object specifies the time at which the router stops using the key for packets
generation. If the value is not set, then it will be taken
as infinite and displayed as 0 example,
Tuesday May 26, 2015 at 1:30 PM shoul…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.12.1.6
fsMIOspfv3IfAuthKeyStopAccept
This object specifies the time at which the router stops using the key for packets
Verification. If the value is not set, then it will be taken
as infinite and displayed as 0 example,
Tuesday May 26, 2015 at 1:30 PM sho…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.12.1.7
fsMIOspfv3IfAuthKeyStatus
This object identifies the status of the key.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.24.12.1.8

fsMIOspfv3VirtIfAuthTable

table
.1.3.6.1.4.1.29601.2.24.13 · 1 row entry · 9 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3VirtIfAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3VirtIfAuthTable' 
This OSPF-V3 Interface Authentication Table describes the parameters
required for cryptographic Authentication.
fsMIOspfv3VirtIfAuthEntry row .1.3.6.1.4.1.29601.2.24.13.1
This object describes entry of one
Authentication Key from the viewpoint of OSPF-V3.
Indexes
Column Syntax OID
fsMIOspfv3VirtIfAuthAreaId
This object specifies the transit area that the virtual link
traverses. By definition, this should not be 0.0.0.0.
OSPF-MIBAreaID .1.3.6.1.4.1.29601.2.24.13.1.1
fsMIOspfv3VirtIfAuthNeighbor
This object specifies the Router ID of the Virtual Neighbor.
OSPF-MIBRouterID .1.3.6.1.4.1.29601.2.24.13.1.2
fsMIOspfv3VirtIfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF-V3 packet.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.24.13.1.3
fsMIOspfv3VirtIfAuthKey
This object specifies the secret key which is used to create the
message digest appended to the OSPF-V3 packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.29601.2.24.13.1.4
fsMIOspfv3VirtIfAuthKeyStartAccept
This object specifies the time at which the router starts generating packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.13.1.5
fsMIOspfv3VirtIfAuthKeyStartGenerate
This object specifies the time at which the router starts generating packets that have
been created with the key. If the value is not set, then it
will be taken as 0, The value 0 mapped to key creation time
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.13.1.6
fsMIOspfv3VirtIfAuthKeyStopGenerate
This object specifies the time at which the router stops using the key for packets
generation. If the value is not set, then it will be taken
as infinite and displayed as 0 example,
Tuesday May 26, 2015 at 1:30 PM shoul…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.13.1.7
fsMIOspfv3VirtIfAuthKeyStopAccept
This object specifies the time at which the router stops using the key for packets
Verification. If the value is not set, then it will be taken
as infinite and displayed as 2136-02-06,06:28:15,
DateTime equivalent to ma…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.29601.2.24.13.1.8
fsMIOspfv3VirtIfAuthKeyStatus
This object identifies the status of the key.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.24.13.1.9

fsMIOspfv3VirtIfCryptoAuthTable

table
.1.3.6.1.4.1.29601.2.24.14 · 1 row entry · 2 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIOspfv3VirtIfCryptoAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIOSPFV3-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIOSPFV3-MIB::fsMIOspfv3VirtIfCryptoAuthTable' 
This table holds the crypto authentication type.
fsMIOspfv3VirtIfCryptoAuthEntry row .1.3.6.1.4.1.29601.2.24.14.1
This object describes the entry of the cryptographic authentication.
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfv3VirtIfCryptoAuthType
This object specifies the SHA crypto authentication type to be
used on the interface
Enumerationr/w
Enumerated Values:
1sha1
3sha256
4sha384
5sha512
6none
 .1.3.6.1.4.1.29601.2.24.14.1.1
fsMIOspfv3VirtIfCryptoAuthMode
This object specifies the crypto authentication mode to be used on the interface
for setting transition
Enumerationr/w
Enumerated Values:
1full
2transition
3none
 .1.3.6.1.4.1.29601.2.24.14.1.2