ARICENT-ECFM-Y1731-MI-MIB Table View

This object specifies ECFM information specific to interface.

fsMIY1731PortEntry row .1.3.6.1.4.1.29601.2.7.1.1.1.1

This object specifies Each entry in this table is for each interface present in the system.
This table is indexed by the fsMIY1731PortIfIndex

Indexes

fsMIY1731PortIfIndex

Column	Syntax	OID
fsMIY1731PortIfIndex This object specifies the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.7.1.1.1.1.1
fsMIY1731PortAisOut This object specifies the Number of AIS PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.2
fsMIY1731PortAisIn This object specifies the Number of AIS PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.3
fsMIY1731PortLckOut This object specifies the Number of LCK PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.4
fsMIY1731PortLckIn This object specifies the Number of LCK PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.5
fsMIY1731PortTstOut This object specifies the Number of TST PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.6
fsMIY1731PortTstIn This object specifies the Number of TST PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.7
fsMIY1731PortLmmOut This object specifies the Number of LMM PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.8
fsMIY1731PortLmmIn This object specifies the Number of LMM PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.9
fsMIY1731PortLmrOut This object specifies the Number of LMR PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.10
fsMIY1731PortLmrIn This object specifies the Number of LMR PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.11
fsMIY1731Port1DmOut This object specifies the Number of 1DM PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.12
fsMIY1731Port1DmIn This object specifies the Number of 1DM PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.13
fsMIY1731PortDmmOut This object specifies the Number of DMM PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.14
fsMIY1731PortDmmIn This object specifies the Number of DMM PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.15
fsMIY1731PortDmrOut This object specifies the Number of DMR PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.16
fsMIY1731PortDmrIn This object specifies the Number of DMR PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.17
fsMIY1731PortApsOut This object specifies the Number of APS PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.18
fsMIY1731PortApsIn This object specifies the Number of APS PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.19
fsMIY1731PortMccOut This object specifies the Number of MCC PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.20
fsMIY1731PortMccIn This object specifies the Number of MCC PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.21
fsMIY1731PortVsmOut This object specifies the Number of VSM PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.22
fsMIY1731PortVsmIn This object specifies the Number of VSM PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.23
fsMIY1731PortVsrOut This object specifies the Number of VSR PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.24
fsMIY1731PortVsrIn This object specifies the Number of VSR PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.25
fsMIY1731PortExmOut This object specifies the Number of EXM PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.26
fsMIY1731PortExmIn This object specifies the Number of EXM PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.27
fsMIY1731PortExrOut This object specifies the Number of EXR PDUs transmitted by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.28
fsMIY1731PortExrIn This object specifies the Number of EXR PDUs received by this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.29
fsMIY1731PortOperStatus This object specifies the administrative module status of Ethernet Y1731 functionality. This enables or disables Y1731 in the system. If set to enable, enables the Y1731 for a particular port. Otherwise, disables Y1731…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.1.1.1.30
fsMIY1731LastTxFailOpcode This object specifies the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure trap will generate & which contain this value.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.1.1.1.31

This object specifies the List of per virtual context ECFM-Y1731 Module Parameters.

fsMIY1731ContextEntry row .1.3.6.1.4.1.29601.2.7.1.2.1.1

This object specifies the Per virtual context ECFM-Y1731 module parmaters.

Indexes

fsMIY1731ContextId

Column	Syntax	OID
fsMIY1731ContextId This object specifies the virtual context in the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.1.1.1
fsMIY1731ContextName This object specifies the Name of the virtual context.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.29601.2.7.1.2.1.1.2
fsMIY1731FrameLossBufferClear This object specifies the Trigger to remove the contents of Buffer maintained for storing frame-loss measured at various times. Note: Get operation value should be ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.1.1.3
fsMIY1731FrameDelayBufferClear This object specifies the Trigger to remove the contents of Buffer maintained for storing frame-delay measured at various times. Note: Get operation value should be ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.1.1.4
fsMIY1731LbrCacheClear This object specifies the Trigger to remove the contents of loopback cache maintained for storing loop back replies. Note: Get operation value should be ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.1.1.5
fsMIY1731ErrorLogClear This object specifies the Trigger to remove the contents of continuity check error log maintained to store continuity check errors detected by MEP. Note: Get operation value should be ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.1.1.6
fsMIY1731FrameLossBufferSize This object specifies the Maximum size (in entries) of the Frame Loss Buffer.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.29601.2.7.1.2.1.1.7
fsMIY1731FrameDelayBufferSize This object specifies the Maximum number of entries for the Frame Delay Buffer	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.29601.2.7.1.2.1.1.8
fsMIY1731LbrCacheSize This object specifies the Maximum number of entries for the loopback replies (LBR) Cache	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.29601.2.7.1.2.1.1.9
fsMIY1731LbrCacheHoldTime This object specifies the Time (in minutes) for which loopback replies (LBR) cache table entries are retained.	Integer32r/w Constraints: range: 1-2880	.1.3.6.1.4.1.29601.2.7.1.2.1.1.10
fsMIY1731TrapControl This object specifies a vector of Boolean notification types, used to enable or disable the Y1731 notification types: bTrapBadPduReceived bTrapFrameLoss bTrapFrameDelay bTrapDefRdiCondition …	FsY1731Trapsr/w Type Values: 0 none 1 bTrapTstReceivedWithError 2 bTrapFrameLoss 3 bTrapFrameDelay 4 bTrapDefRdiCondition 5 bTrapDefLossOfContinuity 6 bTrapDefUnexpectedPeriod 7 bTrapDefUnexpectedMep 8 bTrapDefMisMerge 9 bTrapDefUnexpectedMegLevel 10 bTrapDefLocalLinkFailure 11 bTrapDefInternalHWFailure 12 bTrapDefInternalSWFailure 13 bTrapDefAisCondition 14 bTrapDefLckCondition	.1.3.6.1.4.1.29601.2.7.1.2.1.1.11
fsMIY1731ErrorLogStatus This object specifies the administrative status of Error Log. This enables or disables the logging of errors or defects detected by MEP.	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.1.1.12
fsMIY1731ErrorLogSize This object specifies the Maximum number of entries for the Error Log, only if fsMIY1731ErrorLogStatus is enabled.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.29601.2.7.1.2.1.1.13
fsMIY1731OperStatus This object specifies the administrative module status of Ethernet Y1731 functionality in CFM module. This enables or disables Y1731 in the system. A value of 'enabled' (1) indicates that Y1731 is enabl…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.1.1.14
fsMIY1731LbrCacheStatus This object specifies the administrative status of LBR cache. This enables or disables caching of LBRs	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.1.1.15

This object specifies the Maintenance Entity Group table. Each row in the table
represents a different Maintenance Entity Group.
          
A Maintenance Entity Group is described in ITU-T Recommendation 
Y.1731 as the one which includes different MEs that satisfy the 
following conditions:
- MEs in a MEG exist in the same administrative boundary; and
- MEs in a MEG have the same MEG Level; and
- MEs in a MEG belong to the same point-to-point ETH connection or 
  multipoint ETH connectivity.

fsMIY1731MegEntry row .1.3.6.1.4.1.29601.2.7.1.2.2.1

This object specifies the Maintenance Entity Group table entry. This entry is not lost
upon reboot. It is backed up by stable storage.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex

Column	Syntax	OID
fsMIY1731MegIndex This object specifies the index to the Maintenance Entity Group table.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.2.1.1
fsMIY1731MegClientMEGLevel This object specifies the MEG Level at which the most immediate client layer MEPs or MIPs exist. The value (-1) is reserved to indicate that no client MEG level has been configured.	IEEE8021-CFM-MIBDot1agCfmMDLevelOrNoner/w Type Constraints: range: -1..7	.1.3.6.1.4.1.29601.2.7.1.2.2.1.2
fsMIY1731MegVlanPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG until user explicitly configures pa…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.2.1.3
fsMIY1731MegDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CFM frame. Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG until user explicitly configur…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.2.1.4
fsMIY1731MegRowStatus This object specifies the status of MEG row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are row status activ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.7.1.2.2.1.5

This object specifies the Maintenance Entity table.  Each row in the table represents 
an ME.  An ME represents a relationship between two MEPs, each 
configured with a single service instance.
          
Configuring a Maintenance Entity Group End Point (MEP) at each 
of the DSAPs creates a Maintenance Entity (ME) to monitor
that connectionless connectivity. The ITU-Carrier Code (ICC) and 
Unique MEGID Code (UMC) form the Maintenance Entity Group Identifier 
(MEGID) that is carried in CFM Messages to identify incorrect 
connectivity among Service Instances.  A small integer, the 
Maintenance Entity Group End Point Identifier (MEPID), identifies 
each MEP among those configured on a single ME.
          
This table uses two indices, first index is the index of the
Maintenance Entity Group table.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.

fsMIY1731MeEntry row .1.3.6.1.4.1.29601.2.7.1.2.3.1

This object specifies the ME table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex

Column	Syntax	OID
fsMIY1731MeIndex This object specifies the Index of the ME table.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.3.1.1
fsMIY1731MeCciEnabled This object specifies the If set to true, all MEPs in the ME will generate CCM messages.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.3.1.2
fsMIY1731MeCcmApplication This object specifies an enumerated value indicating the ETH-CC Role. Note: Performance Monitoring is applicable only for point-to-point Maintenance Entity (ME).	FsY1731CcmApplicationr/w Type Values: 0 ccFaultManagement 1 ccPerformanceMonitoring 2 ccProtectionSwitching	.1.3.6.1.4.1.29601.2.7.1.2.3.1.3
fsMIY1731MeMegIdIcc This object specifies the Unique code assigned to Network Operator or Service Provider maintained by ITU-T Telecommunication Standardization Bureau. The ITU Carrier Code used to form MEGID. …	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.29601.2.7.1.2.3.1.4
fsMIY1731MeMegIdUmc This object specifies the Unique code assigned by Network Operator or Service Provider and is appended to fsMIY1731MeMegIdIcc to form the MEGID The unique MEGID Code used to form MEGID. T…	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.29601.2.7.1.2.3.1.5
fsMIY1731MeRowStatus This object specifies the status of ME row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are ro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.7.1.2.3.1.6

This object specifies the Maintenance Entity Group End Point (MEP) table.
          
Each row in the table represents a different MEP. A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses.  It is an end point of a
single Maintenance Entity.
          
This table uses three indices. The first two indices are the
indices of the Maintenance Entity Group (MEG) and Maintenance 
Entity (ME) tables, the reason being that a MEP is always 
related to an ME and MEG.
          
The MEP table stores all the managed objects for sending
LBM, LTM, AIS and LCK. This table also stores all the managed
objects required for monitoring the performance.
          
The objects which are used to initiate a transaction are to
be set only when the row-status of the table is active.
'fsMIY1731MepTransmit' naming convention is used to isolate 
these objects from the others.

fsMIY1731MepEntry row .1.3.6.1.4.1.29601.2.7.1.2.4.1

This object specifies the MEP table entry

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier

Column	Syntax	OID
fsMIY1731MepIdentifier This object specifies the Integer that is unique among all the MEPs in the same ME. Other definition is: a small integer, unique over a given Maintenance Entity, identifying a specific Maintenance Entity Group End Point…	IEEE8021-CFM-MIBDot1agCfmMepId Type Constraints: range: 1..8191	.1.3.6.1.4.1.29601.2.7.1.2.4.1.1
fsMIY1731MepOutOfService This object specifies a Boolean indicating the administrative service that is being or to be performed. true indicates operation needs to be performed Out-of-service and false indicates operation needs to be performed…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.2
fsMIY1731MepRdiCapability This object specifies the administrative status of RDI Transmission capability. This enables or disables the transmission of RDI bit in the CCM PDU by the MEP. If fsMIY1731MepRdiPeriod is provided then it will be enabl…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.3
fsMIY1731MepRdiPeriod This object specifies the Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability) is enabled.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.4
fsMIY1731MepCcmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CCM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.5
fsMIY1731MepCcmPriority This object is used to configure CCM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be used in the VLAN tag, if present in…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.6
fsMIY1731MepMulticastLbmRecvCapability This object specifies the administrative status of Multicast LBM frame reception. This enables or disables the capability of MEP to process the multicast LBM. A value of 'enabled' (1) indicates to accept…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.7
fsMIY1731MepLoopbackCapability This object specifies the administrative status of Loopback (ping) capability. This enables or disables capability of MEP to initiate and process Loopback (ping) operation. A value of 'enabled' (1) indicates to initi…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.8
fsMIY1731MepLbmCurrentTransId This object specifies the current LBM Transaction.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.9
fsMIY1731MepTransmitLbmStatus This object specifies an Enumerated value set to 'start' to initiate LBM transmission and 'stop' to stop LBM transmission. 'ready' and 'notReady' indicates whether LBM can be initiated or not. Note: User…	FsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.29601.2.7.1.2.4.1.10
fsMIY1731MepTransmitLbmResultOK This object specifies the result of LBM transaction, - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.11
fsMIY1731MepTransmitLbmDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitLbmDestType is 'Unicast'	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.12
fsMIY1731MepTransmitLbmDestMepId This object specifies the Maintenance association End Point Identifier of another MEP in the same Maintenance Entity to which the LBM is to be sent. This address will be used if the value of the column fsMIY1731MepTrans…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.4.1.13
fsMIY1731MepTransmitLbmDestType This object specifies the Lbm Destination Type i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network).	FsY1731DestTyper/w Type Values: 0 unicast 1 mepid 2 multicast 3 mipid	.1.3.6.1.4.1.29601.2.7.1.2.4.1.14
fsMIY1731MepTransmitLbmMessages This object specifies the number of Loopback messages to be transmitted.	Integer32r/w Constraints: range: 0-8192	.1.3.6.1.4.1.29601.2.7.1.2.4.1.15
fsMIY1731MepTransmitLbmInterval This object specifies the Interval between two successive LBM transmissions to be used by the MEP. fsMIY1731MepTransmitLbmIntervalType are used as units for this object. Ranges applicable for allowed uni…	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.16
fsMIY1731MepTransmitLbmIntervalType This object specifies the Units of fsMIY1731MepTransmitLbmInterval to be used by the MEP for LBM transmission.	FsY1731TimeIntervalTyper/w Type Values: 1 microseconds 2 milliseconds 3 seconds	.1.3.6.1.4.1.29601.2.7.1.2.4.1.17
fsMIY1731MepTransmitLbmDeadline This object Specifies a timeout, in seconds, before loopback (ping) exits. Loopback (ping) exits, if configured number of messages fsMIY1731MepTransmitLbmMessages are sent before timeout.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.18
fsMIY1731MepTransmitLbmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LBM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.19
fsMIY1731MepTransmitLbmPriority This object is used to configure LBM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be used in the VLAN tag, if present in…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.20
fsMIY1731MepTransmitLbmVariableBytes This object specifies a varying number of data bytes is to be transmitted in the LBM. 'true' indicates that LBMs to be transmitted are with varying bytes of data and 'false' indicates that LBM(s)to be transmitted is…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.21
fsMIY1731MepTransmitLbmTlvType This object specifies the type of the TLV to be included in the LBM frame, if required to be send.	FsY1731TransmitLbmTlvTypeOrNoner/w Type Values: 0 none 1 dataTlv 2 testTlv	.1.3.6.1.4.1.29601.2.7.1.2.4.1.22
fsMIY1731MepTransmitLbmDataPattern This object specifies an arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent, determined by the fsMIY1731MepTransmitLbmTlvType. Size of data value sent in LBM i…	OctetStringr/w Constraints: range: 0-8970	.1.3.6.1.4.1.29601.2.7.1.2.4.1.23
fsMIY1731MepTransmitLbmDataPatternSize This object specifies the size (bytes) of the pattern(fsMIY1731MepTransmitLbmDataPatterm) to be included in the Data TLV, if the Data TLV is to be included in the LBM. fsMIY1731MepTransmitLbmDataPattern should be of z…	Unsigned32r/w Constraints: range: 0-8970	.1.3.6.1.4.1.29601.2.7.1.2.4.1.24
fsMIY1731MepTransmitLbmTestPatternType This object specifies the type of pattern to be included in the test TLV of the LBM, if the Test TLV is selected to be sent.	FsY1731TestTlvPatternTyper/w Type Values: 0 patternNullSignalWithoutCRC32 1 patternNullSignalWithCRC32 2 patternPRBSWithoutCRC32 3 patternPRBSWithCRC32	.1.3.6.1.4.1.29601.2.7.1.2.4.1.25
fsMIY1731MepTransmitLbmTestPatternSize This object specifies the size of the pattern to be included in the Test TLV, if the Test TLV is selected to be sent. Maximum frame size supported by ECFM is 9K, following is the calculation for the maxim…	Unsigned32r/w Constraints: range: 0-8969	.1.3.6.1.4.1.29601.2.7.1.2.4.1.26
fsMIY1731MepTransmitLbmSeqNumber This object specifies the sequence number to be transmitted in the next LBM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.27
fsMIY1731MepBitErroredLbrIn This object specifies the number of bit-errored LBRs received. LBR with different pattern as of Test TLV in the sent LBM is considered as bit-errored LBR	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.28
fsMIY1731MepTransmitLtmStatus This object specifies a Enumerated value set to 'transmit' to initiate LTM transmission. 'ready' and 'notReady' indicates whether LTM can be initiated or not. Note: User can not set to 'ready' or 'notRea…	Enumerationr/w Enumerated Values: 0 ready 1 notReady 2 transmit	.1.3.6.1.4.1.29601.2.7.1.2.4.1.29
fsMIY1731MepTransmitLtmResultOK This object specifies the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.30
fsMIY1731MepTransmitLtmFlags This object specifies the flags field for LTMs transmitted by the MEP. Indicates that only MAC address learned in bridge's forwarding tables is to be used to forward the LTM to the next hop.	Bitsr/w Enumerated Values: 0 useHWonly	.1.3.6.1.4.1.29601.2.7.1.2.4.1.31
fsMIY1731MepTransmitLtmTargetMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitLtmTargetIsMepId is 'false'.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.32
fsMIY1731MepTransmitLtmTargetMepId This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.4.1.33
fsMIY1731MepTransmitLtmTargetIsMepId This object specifies True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.34
fsMIY1731MepTransmitLtmTtl This object specifies the LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each entity that handles the LTM. The value received…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.7.1.2.4.1.35
fsMIY1731MepTransmitLtmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LTM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.36
fsMIY1731MepTransmitLtmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LTM frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.37
fsMIY1731MepTransmitLtmSeqNumber This object specifies the sequence number to be transmitted in next LBM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.38
fsMIY1731MepTransmitLtmTimeout This object specifies the Time for all the replies (LTR) of a LTM to be received by the MEP.No reply (LTR) would be entertained thereafter (timeout).	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.39
fsMIY1731MepMulticastTstRecvCapability This object specifies the administrative status of multicast TST frame reception. This enables or disables the capability of MEP to process the multicast TST. A value of 'enabled' (1) indicates to accept and process mu…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.40
fsMIY1731MepTransmitTstPatternType This object specifies the type of the pattern to be included in the test TLV of TST frame.	FsY1731TestTlvPatternTyper/w Type Values: 0 patternNullSignalWithoutCRC32 1 patternNullSignalWithCRC32 2 patternPRBSWithoutCRC32 3 patternPRBSWithCRC32	.1.3.6.1.4.1.29601.2.7.1.2.4.1.41
fsMIY1731MepTransmitTstVariableBytes This object specifies a varying number of data bytes to send in the TST. True indicates that TSTs are to be send with varying bytes of data and False indicates that TST(s) are send with same number of bytes of data.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.42
fsMIY1731MepTransmitTstPatternSize This object specifies the size of the pattern to be included in the Test TLV of the TST message. Maximum frame size supported by ECFM is 9K, following is the calculation for the maximum size of test-tlv …	Unsigned32r/w Constraints: range: 0-8969	.1.3.6.1.4.1.29601.2.7.1.2.4.1.43
fsMIY1731MepTransmitTstDestType This object specifies the TST Destination Types (unicast,MEPID,Multicast)	FsY1731DestTyper/w Type Values: 0 unicast 1 mepid 2 multicast 3 mipid	.1.3.6.1.4.1.29601.2.7.1.2.4.1.44
fsMIY1731MepTransmitTstDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitTstDestType is 'Unicast'	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.45
fsMIY1731MepTransmitTstDestMepId This object specifies the Maintenance Entity Group End Point Identifier of another MEP in the same Maintenance Association to which the TST is to be sent. This address will be used if the value of the column fsMIY1731Me…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.4.1.46
fsMIY1731MepTransmitTstSeqNumber This object specifies the Sequence number to be sent in the TST message.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.47
fsMIY1731MepTransmitTstPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted TST frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.48
fsMIY1731MepTransmitTstDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted TST frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.49
fsMIY1731MepTransmitTstMessages This object specifies the number of Test messages to be transmitted.	Integer32r/w Constraints: range: 0-8192	.1.3.6.1.4.1.29601.2.7.1.2.4.1.50
fsMIY1731MepTransmitTstStatus This object specifies an Enumerated value set to 'start' to initiate TST transmission and 'stop' to stop TST transmission. 'ready' and 'notReady' indicates whether TST can be initiated or not. Note: User…	FsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.29601.2.7.1.2.4.1.51
fsMIY1731MepTransmitTstResultOK This object specifies the result of the operation: - true The Test Message(s) will be (or has been) sent. - false The Test Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.52
fsMIY1731MepTransmitTstInterval This object specifies the Interval between two successive TST transmissions to be used by the MEP. fsMIY1731MepTransmitTstIntervalType is used as units for this object. Ranges applicable for allowed unit…	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.53
fsMIY1731MepTransmitTstIntervalType This object specifies the Units of fsMIY1731MepTransmitTstInterval to be used by the MEP for TSTs transmission.	FsY1731TimeIntervalTyper/w Type Values: 1 microseconds 2 milliseconds 3 seconds	.1.3.6.1.4.1.29601.2.7.1.2.4.1.54
fsMIY1731MepTransmitTstDeadline This object specifies the Specify a timeout(in seconds), before test exits. Test exits, if configured number of messages are sent before timeout.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.55
fsMIY1731MepBitErroredTstIn This object specifies the number of bit-errored TST messages received. Reception of invalid TST message is considered as bit-errored TST messages.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.56
fsMIY1731MepValidTstIn This object specifies the Number of valid TST messages received.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.57
fsMIY1731MepTstOut This object specifies the Number of TST messages transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.58
fsMIY1731MepTransmitLmmStatus This object specifies an Enumerated value set to 'start' to initiate LM transmission and 'stop' to stop LM transmission. 'ready' and 'notReady' indicates whether LM can be initiated or not. Note: User ca…	FsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.29601.2.7.1.2.4.1.59
fsMIY1731MepTransmitLmmResultOK This object specifies the result of the operation: - true The Loss measurement Message (LMM) will be (or has been) sent. - false The Loss measurement Message (LMM) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.60
fsMIY1731MepTransmitLmmInterval This object specifies the Interval between two successive LMM transmissions to be used by the MEP.	FsY1731LmmIntervalr/w Type Values: 1 interval100ms 2 interval1s 3 interval10s 4 interval1min 5 interval10min	.1.3.6.1.4.1.29601.2.7.1.2.4.1.61
fsMIY1731MepTransmitLmmDeadline This object specifies a timeout, in seconds, before loss measurement exits. Loss Measurement exits, if configured number of messages are sent before timeout.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.62
fsMIY1731MepTransmitLmmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.63
fsMIY1731MepTransmitLmmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.64
fsMIY1731MepTransmitLmmDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for LMM.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.65
fsMIY1731MepTransmitLmmDestMepId This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.4.1.66
fsMIY1731MepTransmitLmmDestIsMepId This object specifies the True indicates that MEPID of the target MEP is used for LM frame transmission. False indicates that unicast destination MAC address of the target MEP is used for Frame Loss Measurement transmis…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.67
fsMIY1731MepTransmitLmmMessages This object specifies the number of LMM messages to be transmitted.	Integer32r/w Constraints: range: 0-8192	.1.3.6.1.4.1.29601.2.7.1.2.4.1.68
fsMIY1731MepTxFCf This object specifies the counter of in-profile data frames transmitted towards its peer MEP transmitted in the last CCM or LMM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.69
fsMIY1731MepRxFCb This object specifies the counter of in-profile data frames received from its peer MEP at the time of receiving the last CCM frame.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.70
fsMIY1731MepTxFCb This object specifies the value of fsMIY1731MepTxFCf field in the last CCM or LMR frame received from its peer MEP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.71
fsMIY1731MepNearEndFrameLossThreshold This object specifies the Threshold value for the near-end frame loss. Notification is sent to Management Application if calculated near-end frame loss exceeds configured threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.72
fsMIY1731MepFarEndFrameLossThreshold This object specifies the Threshold value for the far-end frame loss. Notification is sent to Management Application if calculated far-end frame loss exceeds configured threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.73
fsMIY1731MepTransmitDmStatus This object specifies an Enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM transmission. 'ready' and 'notReady' indicates whether 1DM or DMM can be initiated or not. …	FsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.29601.2.7.1.2.4.1.74
fsMIY1731MepTransmitDmResultOK This object specifies the Indicates the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Delay measurement Message (1DM o…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.75
fsMIY1731MepTransmitDmType This object specifies the Type of delay measurement to be initiated: - oneWay(1) Measurement (by 1DM) is calculated at destination end. - twoWay(2) Measurement (by DMM-DMR) is calculated at initiation…	Enumerationr/w Enumerated Values: 1 oneWay 2 twoWay	.1.3.6.1.4.1.29601.2.7.1.2.4.1.76
fsMIY1731MepTransmitDmInterval This object specifies the Interval between two successive DM messages (1DM or DMM) transmissions to be used by the MEP.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.77
fsMIY1731MepTransmitDmMessages This object specifies the number of DM (1DM or DMM) messages to be transmitted.	Integer32r/w Constraints: range: 0-8192	.1.3.6.1.4.1.29601.2.7.1.2.4.1.78
fsMIY1731MepTransmitDmmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted DMM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.79
fsMIY1731MepTransmit1DmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted 1DM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.80
fsMIY1731MepTransmitDmmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted DMM frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.81
fsMIY1731MepTransmit1DmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted 1DM frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.82
fsMIY1731MepTransmitDmDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for 1DM or DMM.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.83
fsMIY1731MepTransmitDmDestMepId This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.4.1.84
fsMIY1731MepTransmitDmDestIsMepId This object when True indicates that MEPID of the target MEP is used for Delay frame transmission. False indicates that unicast destination MAC address of the target MEP is used for Delay frame transmissi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.85
fsMIY1731MepTransmitDmDeadline This object specifies a timeout, in seconds, before Delay Measurement operation exits. Delay Measurement operation exits, if configured number of messages are sent before timeout.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.86
fsMIY1731MepDmrOptionalFields This object specifies whether to include optional fields in the DMR Frame or not. True indicates optional fields are to be included and False indicates optional fields are not included. Optional fields a…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.87
fsMIY1731Mep1DmRecvCapability This object specifies the administrative status of 1DM Frame reception. This enables or disables the capability of MEP to process the 1DM Frames. A value of 'enabled' (1) indicates to accept and process 1DM Frames. A …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.88
fsMIY1731MepFrameDelayThreshold This object specifies the Threshold (in microseconds) for the Frame delay. Notification is sent to Management application if calculated frame delay exceeds configured threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.89
fsMIY1731MepAisCapability This object specifies the administrative status of AIS capability.This enables or disables transmission of AIS frames. A value of 'enabled' (1) indicates AIS frames will be transmitted when MEP is in…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.90
fsMIY1731MepAisCondition This object specifies the MEP is in AIS condition. AIS condition occurs when it receives an AIS frame.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.91
fsMIY1731MepAisInterval This object specifies the Interval between two successive AIS transmissions.	FsY1731AisLckIntervalr/w Type Values: 1 interval1s 2 interval1min	.1.3.6.1.4.1.29601.2.7.1.2.4.1.92
fsMIY1731MepAisPeriod This object specifies the Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability) is enabled.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.93
fsMIY1731MepAisPriority This object is used for configuring AIS Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be used in the VLAN tag, if present…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.94
fsMIY1731MepAisDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted AIS frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.95
fsMIY1731MepAisDestIsMulticast This object specifies an Enumerated value set to indicate the type of AIS transmission, unicast or multicast. 'true' indicates that AIS(s) are to be transmitted as multicast, 'false' indicates that AIS(s) are to be tra…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.96
fsMIY1731MepAisClientMacAddress This object specifies a unicast destination MAC address of the Client MEP to which AIS frame is to send. This object is not supported on MEPs created over MPLS-TP networks, as these networks do not opera…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.97
fsMIY1731MepLckDestIsMulticast This object specifies an Enumerated value set to indicate the type of LCK transmission, unicast or multicast. 'true' indicates that LCK signals are to be transmitted as multicast, 'false' indicates that LCK signals are…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.98
fsMIY1731MepLckClientMacAddress This object specifies a unicast destination MAC address of the Client MEP to which AIS frame is to send.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.99
fsMIY1731MepLckCondition This object specifies if MEP is in LCK condition. LCK condition occurs when it receives a LCK frame.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.100
fsMIY1731MepLckInterval This object specifies the Interval between two successive LCK transmissions to be used by the MEP.	FsY1731AisLckIntervalr/w Type Values: 1 interval1s 2 interval1min	.1.3.6.1.4.1.29601.2.7.1.2.4.1.101
fsMIY1731MepLckPeriod This object specifies the Time period (in seconds) for which LCK messages are to be transmitted.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.102
fsMIY1731MepLckPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LCK frame.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.7.1.2.4.1.103
fsMIY1731MepLckDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LCK frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.104
fsMIY1731MepLckDelay This object specifies When a MEP is set as locked (for out-of-service operations), data traffic through that MEP will be blocked after this delay.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.29601.2.7.1.2.4.1.105
fsMIY1731MepDefectConditions This object specifies a vector of Boolean indicates the defect conditions.	FsY1731MepDefects Type Values: 0 none 1 bDefRdiCondition 2 bDefLossOfContinuity 3 bDefUnexpectedPeriod 4 bDefUnexpectedMep 5 bDefMisMerge 6 bDefUnexpectedMegLevel 7 bDefLocalLinkFailure 8 bDefInternalHWFailure 9 bDefInternalSWFailure 10 bDefAisCondition 11 bDefLckCondition	.1.3.6.1.4.1.29601.2.7.1.2.4.1.106
fsMIY1731MepUnicastCcmMacAddress This object specifies the Unicast MacAddress used for performance monitoring through Continuity Check Messages. Continuity Check Messages are to be transmitted as multicast frames incase this object con…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.107
fsMIY1731MepRowStatus This object specifies the status of MEP row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are r…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.7.1.2.4.1.108
fsMIY1731MepRxFCf This object specifies the value of fsMIY1731MepRxFCf field is the value of in-profile data frames received from its peer MEP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.109
fsMIY1731Mep1DmTransInterval This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay V…	Integer32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.29601.2.7.1.2.4.1.110
fsMIY1731MepTransmitThDestMacAddress This object specifies the the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Throughput Measurement.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.4.1.111
fsMIY1731MepTransmitThDestMepId This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.4.1.112
fsMIY1731MepTransmitThDestIsMepId This object when True indicates that MEPID of the target MEP is used for Throughput Measurement. False indicates that unicast destination MAC address of the target MEP is used for Throughput Measurement.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.113
fsMIY1731MepTransmitThMessages This object specifies the number of Throughput messages (LBM / TST) to be transmitted.	Integer32r/w Constraints: range: 0-8192	.1.3.6.1.4.1.29601.2.7.1.2.4.1.114
fsMIY1731MepTransmitThPps This object specifies the number of Throughput messages being transmitted in a second. It is used to calculate the time interval between two successive message transmission. It's default value is 100 packets per sec.	Unsigned32r/w Constraints: range: 1-100000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.115
fsMIY1731MepTransmitThDeadline This object specifies a timeout, in seconds, before Throughput Measurement operation exits. Throughput Measurement operation exits, if configured number of messages are sent before timeout.	Unsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.29601.2.7.1.2.4.1.116
fsMIY1731MepTransmitThType This object specifies the Type of Throughput measurement to be initiated: - oneWay(1) Measurement (by TST) is calculated at initiation end with the use of VSM PDUs. - twoWay(2) Measurement (by LBM-L…	Enumerationr/w Enumerated Values: 1 oneWay 2 twoWay	.1.3.6.1.4.1.29601.2.7.1.2.4.1.117
fsMIY1731MepTransmitThStatus This object specifies an Enumerated value set to 'start' to initiate Throughput transaction and 'stop' to stop Throughput transaction. 'ready' and 'notReady' indicates whether Throughput transaction can be initiated or…	FsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.29601.2.7.1.2.4.1.118
fsMIY1731MepTransmitThFrameSize The object specifies the initial total packet size configured by the user including the Test TLV of the (LBM / TST) message. As the Frame Size value is varied to calculate the maximum Throughput this v…	Unsigned32r/w Constraints: range: 64-1522	.1.3.6.1.4.1.29601.2.7.1.2.4.1.119
fsMIY1731MepTransmitThBurstMessages This object specifies the number of Throughput messages (LBM / TST) to be transmitted in a burst.	Integer32r/w Constraints: range: 0-8192	.1.3.6.1.4.1.29601.2.7.1.2.4.1.120
fsMIY1731MepTransmitThBurstDeadline This object specifies the time period, in milliseconds, for which a burst exists (LB Burst / TST Burst ).	Unsigned32r/w Constraints: range: 0-172800000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.121
fsMIY1731MepTransmitThBurstType This object specifies the Throughput Burst can be initiated as: - burstMessages(1) Number of Throughput messages (LBM / TST) to be transmitted in a burst. - burstDeadline(2) Timeout, …	Enumerationr/w Enumerated Values: 1 burstMessages 2 burstDeadline	.1.3.6.1.4.1.29601.2.7.1.2.4.1.122
fsMIY1731MepTransmitThTestPatternType This object specifies the type of the pattern to be included in the test TLV of Throughput frame(LBM/TST PDU) . TestTlvPattern Types can be: patternNullSignalWithoutCRC32(0) Pattern contains null signal without …	FsY1731TestTlvPatternTyper/w Type Values: 0 patternNullSignalWithoutCRC32 1 patternNullSignalWithCRC32 2 patternPRBSWithoutCRC32 3 patternPRBSWithCRC32	.1.3.6.1.4.1.29601.2.7.1.2.4.1.123
fsMIY1731MepThVerifiedBps This object specifies the verified throughput value.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.124
fsMIY1731MepThUnVerifiedBps This object specifies the throughput value under verification. This is the throughput value for which verification is still to be performed.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.125
fsMIY1731MepTransmitLbmMode This object specifies the LBMs which can be initiated as: - burst(1) Lbms are initiated without waiting for the reception of LBR PDUs. - requestResponse(2) After initiating the Lbm w…	Enumerationr/w Enumerated Values: 1 burst 2 requestResponse	.1.3.6.1.4.1.29601.2.7.1.2.4.1.126
fsMIY1731MepLbmOut This object specifies the Number of LBM messages transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.127
fsMIY1731MepTransmitLbmTimeout This object specifies the Time for all the replies (LBR) of LBMs to be received by the MEP.No reply (LBR) would be entertained thereafter (timeout).	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.128
fsMIY1731MepTstCapability This object specifies the administrative status of Tst capability. This enables or disables capability of MEP to initiate and process Tst operation. A value of 'enabled' (1) indicates to initiate as well as process TS…	FsY1731EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.129
fsMIY1731MepTransmitThResultOK This object specifies the result of Th transaction, - true The TH Message(s) will be (or has been) sent. - false The TH Message(s) will not be sent due to some internal problem.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.130
fsMIY1731MepThVerifiedFrameSize This object specifies the Frame Size with which verified Throughput is achieved	Unsigned32 Constraints: range: 0-9000	.1.3.6.1.4.1.29601.2.7.1.2.4.1.131
fsMIY1731MepAisOffload This object specifies the administrative MEP AIS Offloading status. When value 'enabled' (1) is set, the AIS Offloading is enabled for the MEP. When value 'disabled' (2) is set, the AIS Offloading will be disabled fo…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.7.1.2.4.1.132
fsMIY1731MepLbmTTL This object specifies the time-to-live(TTL) value to be used in the MPLS outer label header when loopback connectivity verification (ping) or diagnostic tests has to be performed to a MEP/MIP in the MPLS-TP network. …	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.29601.2.7.1.2.4.1.133
fsMIY1731MepLbmIcc This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC based MPLS-TP network for which loopback connectivity verification (ping) or diagnostic tests has to be initiated. The ICC code con…	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.29601.2.7.1.2.4.1.134
fsMIY1731MepLbmNodeId This object specifies the Node Id of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests has to be initiated. This must be interpreted in conju…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.135
fsMIY1731MepLbmIfNum This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests has to be initiated. Per Interface MIP is id…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.4.1.136
fsMIY1731MepLoopbackStatus This object specifies the loopback status of the MEP. This object used in Y1564/RFC2544 to put the remote end in loopback mode for looping back all the data packets.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.7.1.2.4.1.137

This object specifies the Error Log table.
Size of this table is defined by the object fsMIY1731ErrorLogSize.
If the addition of an error entry would exceed the 
resources allocated to table, then the oldest entries in the table are 
deleted until sufficient resources are available to hold the new
error entry.
          
Each row in the table represents error or defect
detected by a specific MEP.
This table uses three indices. The first four are the indices of MEP
table the reason being that a error or defect can only
be detected by MEP.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731ErrorLogEntry row .1.3.6.1.4.1.29601.2.7.1.2.5.1

This object specifies the Error Log Table.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731ErrorLogSeqNumber

Column	Syntax	OID
fsMIY1731ErrorLogSeqNumber This object specifies the Locally maintained sequence number of Error Log Entries	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.5.1.1
fsMIY1731ErrorLogTimeStamp This object specifies the time at which error or defect is detected by a MEP.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.29601.2.7.1.2.5.1.2
fsMIY1731ErrorLogType This object specifies the type of error or defect detected by MEP. Type of errors/defects are: bDefRdiCondition, bDefLossOfContinuity, bDefUnexpectedPeriod, bDefUnexpectedMep, bDefMisMerge, bDefUnexpectedMegLevel, bDefL…	FsY1731ErrorLogType Type Values: 1 logRdiConditionEntry 2 logLossOfContinuityEntry 3 logUnexpectedPeriodEntry 4 logUnexpectedMepEntry 5 logMisMergeEntry 6 logUnexpectedMegLevelEntry 7 logLocalLinkFailureEntry 8 logInternalHWFailureEntry 9 logInternalSWFailureEntry 10 logAisConditonEntry 11 logLckConditionEntry 12 logRdiConditionExit 13 logLossOfContinuityExit 14 logUnexpectedPeriodExit 15 logUnexpectedMepExit 16 logMisMergeExit 17 logUnexpectedMegLevelExit 18 logLocalLinkFailureExit 19 logInternalHWFailureExit 20 logInternalSWFailureExit 21 logAisConditonExit 22 logLckConditionExit	.1.3.6.1.4.1.29601.2.7.1.2.5.1.3
fsMIY1731ErrorLogRMepIdentifier This object specifies the specific remote MEP due to which defect is detected. Zero indicates that no remote MEP contributes for the occurence of defect.	IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.5.1.4

This object specifies the table which extends the MEP table and contains a list of
Linktrace replies received by a specific MEP in response to
a linktrace message.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LtrEntry row .1.3.6.1.4.1.29601.2.7.1.2.6.1

This object specifies the Linktrace Reply table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LtrSeqNumber fsMIY1731LtrReceiveOrder

Column	Syntax	OID
fsMIY1731LtrSeqNumber This object specifies the Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.6.1.1
fsMIY1731LtrReceiveOrder This object specifies an index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. fsMIY1731LtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiato…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.6.1.2
fsMIY1731LtrReceiveTime This object specifies the time taken to receive a LTR in response to a transmitted LTM.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.29601.2.7.1.2.6.1.3

This object specifies the table which extends the MEP table and contains information of
Loopback messages sent by a specific MEP.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LbmEntry row .1.3.6.1.4.1.29601.2.7.1.2.7.1

This object specifies the Loopback Message table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LbmTransId fsMIY1731LbmSeqNumber

Column	Syntax	OID
fsMIY1731LbmTransId This object specifies the Transaction Identifier identifies a loopback or ping (LBM)transaction.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.1
fsMIY1731LbmSeqNumber This object specifies the Sequence number returned by a previous transmit loopback message, indicating which LBM's response is going to be returned.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.2
fsMIY1731LbmBytesSent This object specifies the size (in bytes) of the LBM transmitted.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.3
fsMIY1731LbmTargetMacAddress This object specifies the Mac Address of the target MP (MEP or MIP) to which LBM has been sent. For multicast LBM this object should not be considered.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.7.1.4
fsMIY1731LbmUnexptedLbrIn This object specifies the Number of unexpected Lbrs Received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.5
fsMIY1731LbmDuplicatedLbrIn This object specifies the Number of Duplicated Lbrs Received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.6
fsMIY1731LbmNumOfResponders This object specifies the Number of Responders which have sent the reply (LBR) for the initiated LBM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.7
fsMIY1731LbmDestType This object specifies the type (i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination for which LBM was sent.	FsY1731DestType Type Values: 0 unicast 1 mepid 2 multicast 3 mipid	.1.3.6.1.4.1.29601.2.7.1.2.7.1.8
fsMIY1731LbmDestMepId This object specifies the Target MEP ID to which LBM was sent.	IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.7.1.9
fsMIY1731LbmIcc This object specifies the ICC of the MIP node in ICC based MPLS-TP network for which LBM was sent.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.29601.2.7.1.2.7.1.10
fsMIY1731LbmNodeId This object specifies the Node Id of the specific MIP node in MPLS-TP network for which LBM was sent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.11
fsMIY1731LbmIfNum This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which LBM was sent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.12
fsMIY1731LbmTTL This object specifies the time-to-live(TTL) value used in the MPLS outer label header in the LBM which was sent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.7.1.13

This object specifies the table which extends the MEP table and contains a list of
Loopback replies received by a specific MEP in response to
a loopback message.
          
Size of this table is defined by the object fsMIY1731LbrCacheSize.
If the addition of a loopback reply entry would exceed the 
resources allocated to table, then the oldest entries in the table are 
deleted until sufficient resources are available to hold the new
loopback reply entry.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LbrEntry row .1.3.6.1.4.1.29601.2.7.1.2.8.1

This object specifies the Loopback Reply table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LbmTransId fsMIY1731LbrSeqNumber fsMIY1731LbrReceiveOrder

Column	Syntax	OID
fsMIY1731LbrSeqNumber This object specifies the Sequence number received in the Loopback reply.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.8.1.1
fsMIY1731LbrReceiveOrder This object specifies the Order in which LBRs are received for a same Sequence Number field value.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.8.1.2
fsMIY1731LbrResponderMacAddress This object specifies the Mac Address of the MP which has sent the response for the LBM.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.8.1.3
fsMIY1731LbrReceiveTime This object specifies the Time taken to receive a LBR in response to the transmitted LBM.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.29601.2.7.1.2.8.1.4
fsMIY1731LbrErrorType This object specifies that received loobback reply is errored one. bit 0 indicates bad MSDU (when data in the LBR does not match what was sent in the LBM) bit 1 indicates bit errored LBR (LBR is with bit errors)	FsY1731LbrErrType Type Values: 0 none 1 badMacServiceDataUnit 2 crc32CheckFailure	.1.3.6.1.4.1.29601.2.7.1.2.8.1.5
fsMIY1731LbrDestType This object specifies the Type ((i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination from which LBR was received.	FsY1731DestType Type Values: 0 unicast 1 mepid 2 multicast 3 mipid	.1.3.6.1.4.1.29601.2.7.1.2.8.1.6
fsMIY1731LbrDestMepId This object specifies the MEP which has sent the response for the LBM.	IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Type Constraints: range: 0..8191	.1.3.6.1.4.1.29601.2.7.1.2.8.1.7
fsMIY1731LbrICC This object specifies the ICC of the MIP node in ICC based MPLS-TP network from which LBR was received.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.29601.2.7.1.2.8.1.8
fsMIY1731LbrNodeId This object specifies the Node Id of the specific MIP node in MPLS-TP network from which LBR was received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.8.1.9
fsMIY1731LbrIfNum This object specifies the Interface Number of the specific MIP node in MPLS-TP network from which LBR was received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.8.1.10

This object specifies the table which extends the MEP table and contains output of loopback 
or ping transaction. 
Output includes number of replies recieved, time taken for a reply to
come.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LbStatsEntry row .1.3.6.1.4.1.29601.2.7.1.2.9.1

This object specifies the Loopback Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LbmTransId

Column	Syntax	OID
fsMIY1731LbStatsLbmOut This object specifies the Number of LBMs sent in a loopback or ping transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.9.1.1
fsMIY1731LbStatsLbrIn This object specifies the Number of replies (LBR) received in a loopback or ping transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.9.1.2
fsMIY1731LbStatsLbrTimeAverage This object specifies the Average time taken to receive the replies (LBR) for the current loopback or ping transaction.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.29601.2.7.1.2.9.1.3
fsMIY1731LbStatsLbrTimeMin This object specifies the Minimum time taken to receive the replies (LBR) for the current loopback or ping transaction.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.29601.2.7.1.2.9.1.4
fsMIY1731LbStatsLbrTimeMax This object specifies the Maximum time taken to receive the replies (LBR) for the current loopback or ping transaction.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.29601.2.7.1.2.9.1.5
fsMIY1731LbStatsTotalResponders This object specifies the Total Number of Responders which have sent the reply (LBR) for the initiated LBM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.9.1.6
fsMIY1731LbStatsAvgLbrsPerResponder This object specifies the Average Number of LBR(s) received per Responder.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.9.1.7

This object specifies the table which extends the MEP table and contains a list of
information about the Frame Delay measured at various times by a 
MEP.
Size of this table is defined by the object
fsMIY1731FrameDelayBufferSize. If the addition of a frame delay entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame delay entry.
          
Delay Measured can be of one-way or two-way.

fsMIY1731FdEntry row .1.3.6.1.4.1.29601.2.7.1.2.10.1

This object specifies the Frame delay buffer table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FdTransId fsMIY1731FdSeqNumber

Column	Syntax	OID
fsMIY1731FdTransId This object specifies a delay measurement transaction.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.10.1.1
fsMIY1731FdSeqNumber This object specifies the Locally maintained sequence number of FD Entries	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.10.1.2
fsMIY1731FdTxTimeStampf This object specifies the TxTimeStampf value sent in a Delay measurement message (DMM). or received in 1DM frame.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.10.1.3
fsMIY1731FdMeasurementTimeStamp This object specifies the Time at which measurement takes place.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.29601.2.7.1.2.10.1.4
fsMIY1731FdPeerMepMacAddress This object specifies the Mac Address of the peer MEP to which DM message(s) is sent.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.10.1.5
fsMIY1731FdIfIndex This object specifie the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which measurement takes place is attached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.7.1.2.10.1.6
fsMIY1731FdDelayValue This object specifies the measured frame delay value.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.10.1.7
fsMIY1731FdIFDV This object specifies the Inter frame delay variation, (IFDV), calculated with respect to current transaction.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.10.1.8
fsMIY1731FdFDV This object specifies the Frame delay variation, (IFDV), calculated with respect to current transaction.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.10.1.9
fsMIY1731FdMeasurementType This object specifies the Type of the frame-delay measurement (oneWay or twoWay).	Enumeration Enumerated Values: 1 oneWay 2 twoWay	.1.3.6.1.4.1.29601.2.7.1.2.10.1.10

This object specifies the table which extends the MEP table and contains output of one-way and 
two-way delay measurement transaction.

fsMIY1731FdStatsEntry row .1.3.6.1.4.1.29601.2.7.1.2.11.1

This object specifies the Delay Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FdTransId

Column	Syntax	OID
fsMIY1731FdStatsTimeStamp This object specifies the Time stamp at which one-way or two-way delay measurement (DMM) is initiated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.29601.2.7.1.2.11.1.1
fsMIY1731FdStatsDmmOut This object specifies the Number of DMMs sent for a two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.11.1.2
fsMIY1731FdStatsDmrIn This object specifies the Number of requests received for a one-way or responses received for two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.11.1.3
fsMIY1731FdStatsDelayAverage This object specifies the Average delay measured for a one-way or two-way delay measurement transaction.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.11.1.4
fsMIY1731FdStatsFDVAverage This object specifies the Frame Delay Variation (FDV) average calculated for a delay measurement transaction.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.11.1.5
fsMIY1731FdStatsIFDVAverage This object specifies the Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.11.1.6
fsMIY1731FdStatsDelayMin This object specifies the minimum value of frame-delay.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.11.1.7
fsMIY1731FdStatsDelayMax This object specifies the maximum value of frame-delay.	FsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.29601.2.7.1.2.11.1.8

This object specifies the table which extends the MEP table and contains a information about
the Frame-loss measured at various times by a MEP. 
          
Size of this table is defined by the object
fsMIY1731FrameLossBufferSize. If the addition of a frame loss entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame loss entry.

fsMIY1731FlEntry row .1.3.6.1.4.1.29601.2.7.1.2.12.1

This object specifies the Frame Loss Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FlTransId fsMIY1731FlSeqNumber

Column	Syntax	OID
fsMIY1731FlTransId This object specifies the Identifies a loss measurement transaction.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.12.1.1
fsMIY1731FlSeqNumber This object specifies the Locally maintained sequence number of Frame Loss Entries	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.12.1.2
fsMIY1731FlMeasurementTimeStamp This object specifies the Time at which frame-loss is actually measured.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.29601.2.7.1.2.12.1.3
fsMIY1731FlPeerMepMacAddress This object specifies the Mac Address of the peer MEP to which loss measurement message(s) is sent.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.7.1.2.12.1.4
fsMIY1731FlIfIndex This object specifies the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which measurement takes place is attached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.7.1.2.12.1.5
fsMIY1731FlFarEndLoss This object specifies the far-end frame-loss value.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.12.1.6
fsMIY1731FlNearEndLoss This object specifies the near-end frame-loss value.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.12.1.7
fsMIY1731FlMeasurementTime This object specifies the Time taken to measure frame-loss.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.29601.2.7.1.2.12.1.8

This object specifies the table which extends the MEP table and contains output of 
frame-loss measurement transaction.

fsMIY1731FlStatsEntry row .1.3.6.1.4.1.29601.2.7.1.2.13.1

This object specifies the Frame Loss Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FlTransId

Column	Syntax	OID
fsMIY1731FlStatsTimeStamp This object specifies the Time stamp at which frame-loss measurement transaction is initiated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.29601.2.7.1.2.13.1.1
fsMIY1731FlStatsMessagesOut This object specifies the Number of frames with ETH-LM information sent for a transaction.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.2
fsMIY1731FlStatsMessagesIn This object specifies the Number of frames with ETH-LM information received for a transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.3
fsMIY1731FlStatsFarEndLossAverage This object specifies the Average of the far-end frame-loss measured for a transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.4
fsMIY1731FlStatsNearEndLossAverage This object specifies the Average of the near-end frame-loss measured for a transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.5
fsMIY1731FlStatsMeasurementType This object specifies the Type of the frame-loss measurement (Single-ended or Dual-ended) done.	Enumeration Enumerated Values: 1 singleEnded 2 dualEnded	.1.3.6.1.4.1.29601.2.7.1.2.13.1.6
fsMIY1731FlStatsFarEndLossMin This object specifies the minimum value of far-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.7
fsMIY1731FlStatsFarEndLossMax This object specifies the maxmium value of far-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.8
fsMIY1731FlStatsNearEndLossMin This object specifies the minimum value of near-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.9
fsMIY1731FlStatsNearEndLossMax This object specifies the maxmium value of near-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.7.1.2.13.1.10

This object specifies the Remote Maintenance End Point table for the Y.1731 extensions
over MPLS-TP networks. 
Each row in the table realizes an ME for the MPLS-TP networks using
the local and remote MEP identifiers which are indices to the table. 
This table is mainly used to associate a specific LSP/PW to an ME.
          
This table uses five indices, first index provides the virtual context 
identifier in which this entry resides. The second index is the index 
to the MEG table identifying the specific MD/Level. Third index is the 
index to ME table identifying the specific MEG. The fourth index is 
the Local MEP Indentifier. The fifth index is the remote MEP Identifier.
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.

fsMIY1731MplstpExtRemoteMepEntry row .1.3.6.1.4.1.29601.2.7.1.2.14.1

This object specifies an instance of the Remote Maintenenace End Point table entry used in
Y.1731 based MPLS-TP networks.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731MplstpExtRMepIdentifier

Column	Syntax	OID
fsMIY1731MplstpExtRMepIdentifier This object specifies the Maintenance End Point Identifier of a Remote MEP associated with the Local-MEP(fsMIY1731MepIdentifier) which together constitutes an ME.	IEEE8021-CFM-MIBDot1agCfmMepId Type Constraints: range: 1..8191	.1.3.6.1.4.1.29601.2.7.1.2.14.1.1
fsMIY1731MplstpExtRMepServicePointer This object specifies the MPLS Transport path which represents the ME. This object may point to an entry in the mplsTunnelTable, if the value of the object fsMIEcfmExtMaPrimarySelectorType in fsMIEcfmEx…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.29601.2.7.1.2.14.1.2
fsMIY1731MplstpExtRMepRowStatus This object specifies the status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.7.1.2.14.1.3