ARICENT-DIFFSERV-MIB Table View

This object specifies the table containing Ingress Dot1.p Profile Table.
Currently table will store the Dot1.p Packet priority to internal Priority.
Default mapping is given below.
Dot1.p | Internal Priority
 0     |        0
 1     |        1
 2     |        2
 3     |        3
 4     |        4
 5     |        5
 6     |        6
 7     |        7
Currently this Profile table is supported for BCM and its not supported for Marvell.
Similarly , if any other Chipset supports profile concept, we can use new table
else the user has to use Old Priority mapping table.

fsQoSIngressDot1pMapProfileEntry row .1.3.6.1.4.1.29601.2.6.1.1.7.1

This object specifies the information controlling per Profile configuration for Ingress DOT1.p to Internal Priority.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSIngressDot1pMapProfileIndex This object specifies the index of the table fsQoSIngressDot1pMapProfileTable.	Integer32	.1.3.6.1.4.1.29601.2.6.1.1.7.1.1
fsQoSIngressDot1p0ToIntPrio This object is used to map the incoming Dot1.p with priority 0 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.7.1.2
fsQoSIngressDot1p1ToIntPrio This object is used to map the incoming Dot1.p with priority 1 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.7.1.3
fsQoSIngressDot1p2ToIntPrio This object is used to map the incoming Dot1.p with priority 2 to internal priority.	SNMPv2-SMIInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.1.7.1.4
fsQoSIngressDot1p3ToIntPrio This object is used to map the incoming Dot1.p with priority 3 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.7.1.5
fsQoSIngressDot1p4ToIntPrio This object is used to map the incoming Dot1.p with priority 4 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.7.1.6
fsQoSIngressDot1p5ToIntPrio This object is used to map the incoming Dot1.p with priority 5 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.7.1.7
fsQoSIngressDot1p6ToIntPrio This object is used to map the incoming Dot1.p with priority 6 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.7.1.8
fsQoSIngressDot1p7ToIntPrio This object is used to map the incoming Dot1.p with priority 7 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.7.1.9
fsQosIngressDot1p0Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 0, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.10
fsQosIngressDot1p1Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 1, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.11
fsQosIngressDot1p2Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 2, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.12
fsQosIngressDot1p3Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 3, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.13
fsQosIngressDot1p4Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 4, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.14
fsQosIngressDot1p5Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 5, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.15
fsQosIngressDot1p6Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 6, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.16
fsQosIngressDot1p7Color This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 7, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.7.1.17
fsQoSIngressDot1pMapProfileStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.7.1.18
fsQosIngressDot1pExpbitStatus This object is used to define whether the Incoming MPLS traffic to be classified based on DOT1P or EXP Profile. If it is Enabled, then Incoming MPLS as well as Non-MPLS traffic will be classified based on Ingress DOT1P …	EnableStatusr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.6.1.1.7.1.19

This object specifies the table containing Egress Dot1.p Profile Table.
Currently table will store the internal Priority to Dot1.p.
Default mapping is given below.
Internal Priority |    Dot 1.p
     0            |        0
     1            |        1
     2            |        2
     3            |        3
     4            |        4
     5            |        5
     6            |        6
     7            |        7
 Currently this Profile table is supported for BCM and its not supported for Marvell.
 Similarly , if any other Chipset supports profile concept, we can use new table
 else the user has to use Old Priority mapping table.

fsQoSEgressDot1pMapProfileEntry row .1.3.6.1.4.1.29601.2.6.1.1.8.1

This object specifies the information controlling per Profile configuration for Internal Priority to Dot1.p.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSEgressDot1pMapProfileIndex This object specifies the index of the table fsQoSEgressDot1pMapProfileTable.	Integer32	.1.3.6.1.4.1.29601.2.6.1.1.8.1.1
fsQoSEgressIntPrio0ToDot1p This object is used to map the internal priority to DOT1.p for Priority 0.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.8.1.2
fsQoSEgressIntPrio1ToDot1p This object is used to map the internal priority to DOT1.p for Priority 1.	SNMPv2-SMIInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.1.8.1.3
fsQoSEgressIntPrio2ToDot1p This object is used to map the internal priority to DOT1.p for Priority 2.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.8.1.4
fsQoSEgressIntPrio3ToDot1p This object is used to map the internal priority to DOT1.p for Priority 3.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.8.1.5
fsQoSEgressIntPrio4ToDot1p This object is used to map the internal priority to DOT1.p for Priority 4.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.8.1.6
fsQoSEgressIntPrio5ToDot1p This object is used to map the internal priority to DOT1.p for Priority 5.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.8.1.7
fsQoSEgressIntPrio6ToDot1p This object is used to map the internal priority to DOT1.p for Priority 6.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.8.1.8
fsQoSEgressIntPrio7ToDot1p This object is used to map the internal priority to DOT1.p for Priority 7.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.8.1.9
fsQosEgressIntPrio0Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 0, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.10
fsQosEgressIntPrio1Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 1, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.11
fsQosEgressIntPrio2Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 2, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.12
fsQosEgressIntPrio3Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 3, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.13
fsQosEgressIntPrio4Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 4, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.14
fsQosEgressIntPrio5Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 5, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.15
fsQosEgressIntPrio6Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 6, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.16
fsQosEgressIntPrio7Dot1pColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 7, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.8.1.17
fsQoSEgressDot1pMapProfileStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.8.1.18

This object specifies the table containing Ingress Experimental Profile Table.
Currently table will store the Experimental priority to internal Priority.
When this profile is mapped to an interface, it will be applied to all the tunnels 
created on top of that interface.
Default mapping is given below.
Exp    | Internal Priority
 0     |        0
 1     |        1
 2     |        2
 3     |        3
 4     |        4
 5     |        5
 6     |        6
 7     |        7
Currently this Profile table is supported for BCM and its not supported for Marvell.
Similarly , if any other Chipset supports profile concept, we can use new table
else the user has to use Old Priority mapping table.

fsQoSIngressExpMapProfileEntry row .1.3.6.1.4.1.29601.2.6.1.1.9.1

This object specifies the information controlling per Profile configuration for Experimental Bit to Internal Priority .

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSIngressExpMapProfileIndex This object specifies the index of the table fsQoSIngressExpMapProfileTable.	Integer32	.1.3.6.1.4.1.29601.2.6.1.1.9.1.1
fsQoSIngressExp0ToIntPrio This object is used to map the incoming Experimental bit with priority 0 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.2
fsQoSIngressExp1ToIntPrio This object is used to map the incoming Experimental bit with priority 1 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.3
fsQoSIngressExp2ToIntPrio This object is used to map the incoming Experimental bit with priority 2 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.4
fsQoSIngressExp3ToIntPrio This object is used to map the incoming Experimental bit with priority 3 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.5
fsQoSIngressExp4ToIntPrio This object is used to map the incoming Experimental bit with priority 4 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.6
fsQoSIngressExp5ToIntPrio This object is used to map the incoming Experimental bit with priority 5 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.7
fsQoSIngressExp6ToIntPrio This object is used to map the incoming Experimental bit with priority 6 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.8
fsQoSIngressExp7ToIntPrio This object is used to map the incoming Experimental bit with priority 7 to internal priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.9.1.9
fsQosIngressExp0Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 0, which will be used by color aware policer.	Enumerationr/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.1.9.1.10
fsQosIngressExp1Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 1, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.9.1.11
fsQosIngressExp2Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 2, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.9.1.12
fsQosIngressExp3Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 3, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.9.1.13
fsQosIngressExp4Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 4, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.9.1.14
fsQosIngressExp5Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 5, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.9.1.15
fsQosIngressExp6Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 6, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.9.1.16
fsQosIngressExp7Color This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 7, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.9.1.17
fsQoSIngressExpMapProfileStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.9.1.18

This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental value.
When this profile is mapped to an interface, it will be applied to all the 
tunnels created on top of that interface.
Default mapping is given below.
Internal Priority |       Exp
     0            |        0
     1            |        1
     2            |        2
     3            |        3
     4            |        4
     5            |        5
     6            |        6
     7            |        7
 Currently this Profile table is supported for BCM and its not supported for Marvell.
 Similarly , if any other Chipset supports profile concept, we can use new table
 else the user has to use Old Priority mapping table.

fsQoSEgressExpMapProfileEntry row .1.3.6.1.4.1.29601.2.6.1.1.10.1

This object specifies the information controlling per Profile configuration for Internal Priority to Experimental Bit.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSEgressExpMapProfileIndex This object specifies the index of the table fsQoSEgressExpMapProfileTable.	Integer32	.1.3.6.1.4.1.29601.2.6.1.1.10.1.1
fsQoSEgressIntPrio0ToExp This object is used to map the internal priority 0 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.2
fsQoSEgressIntPrio1ToExp This object is used to map the internal priority 1 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.3
fsQoSEgressIntPrio2ToExp This object is used to map the internal priority 2 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.4
fsQoSEgressIntPrio3ToExp This object is used to map the internal priority 3 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.5
fsQoSEgressIntPrio4ToExp This object is used to map the internal priority 4 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.6
fsQoSEgressIntPrio5ToExp This object is used to map the internal priority 5 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.7
fsQoSEgressIntPrio6ToExp This object is used to map the internal priority 6 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.8
fsQoSEgressIntPrio7ToExp This object is used to map the internal priority 7 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.10.1.9
fsQosEgressIntPrio0ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 0, which will be used by color aware policer.	Enumerationr/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.1.10.1.10
fsQosEgressIntPrio1ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 1, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.10.1.11
fsQosEgressIntPrio2ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 2, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.10.1.12
fsQosEgressIntPrio3ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 3, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.10.1.13
fsQosEgressIntPrio4ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 4, which will be used by color aware policer.	Enumerationr/w Constraints: range: 0-63	.1.3.6.1.4.1.29601.2.6.1.1.10.1.14
fsQosEgressIntPrio5ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 5, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.10.1.15
fsQosEgressIntPrio6ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 6, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.10.1.16
fsQosEgressIntPrio7ExpColor This object specifies the user defined color classification for the egress traffic stream with internal Priority value 7, which will be used by color aware policer.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.1.10.1.17
fsQoSEgressExpMapProfileStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.10.1.18

This object specifies the table that associates Dot1P or EXP ingress 
and egress profiles on an interface.
When profiles are attached to a sub-interface, then the attachment will have effect
only for that sub-interface and its associated VLAN combination (PORT+VLAN).
On an interface if both port based profile as well as PORT+VLAN based profiles are
attached, the preference will be given for PORT+VLAN based profiles.

fsQoSProfileMappingeEntry row .1.3.6.1.4.1.29601.2.6.1.1.11.1

This object specifies the information controlling per port configuration for Priority Code Point
Encoding and Decoding.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSIfIndex This object specifies the interface index for which the ingress/egress profile is configured. When EXP profiles are mapped to this interface, it will be applied to all the tunnels created on top of that interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.1.11.1.1
fsQoSProfileMappingType This object specifies the Profile Mapping to be applied on Dot1P/IP/MPLS type. For Egress EXP profile table, we can specify the internal priority to EXP as well as DOT1P priority mappings. To do so, select the mapping …	Enumeration	.1.3.6.1.4.1.29601.2.6.1.1.11.1.2
fsQoSProfileMappingIngressProfileIndex This object specifies the Ingress Profile ID to be Mapped to a Port/SubInterface.	SNMPv2-SMIInteger32r/w Constraints: range: 0-63	.1.3.6.1.4.1.29601.2.6.1.1.11.1.3
fsQoSProfileMappingEgressProfileIndex This object specifies the Egress Profile ID to be Mapped to a Port/SubInterface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.11.1.4
fsQoSProfileMappingRowStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Constraints: range: 0-63 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.11.1.5

This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental and DOT1P
value. When this profile is mapped to an interface, it will be applied to 
all the tunnels created on top of that interface.
Default mapping is given below.
Internal Priority |       Exp  |   DOT1P
     0            |        0   |     0
     1            |        1   |     1
     2            |        2   |     2
     3            |        3   |     3
     4            |        4   |     4
     5            |        5   |     5
     6            |        6   |     6
     7            |        7   |     7
 This profile is meant only for egress. This creates a profile which maps internal 
 priority to both EXP and DOT1P for the specific label. This profile if mapped on 
 an interface, will be effective for all tunnels. This profile will not apply for
 egress DOT1P  mapping of the interface; if DOT1P profile alone need to be mapped 
 to the interface, then egress DOT1P profile needs to be attached separately.
 Currently this Profile table is supported for BCM and its not supported for Marvell.
 Similarly , if any other Chipset supports profile concept, we can use new table
 else the user has to use Old Priority mapping table.

fsQoSEgressExpDot1pMapProfileEntry row .1.3.6.1.4.1.29601.2.6.1.1.12.1

This object specifies the information controlling per Profile configuration for Internal Priority to Experimental Bit and DOT1P Priority.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSEgressExpDot1pMapProfileIndex This object specifies the index of the table fsQoSEgressExpDot1pMapProfileTable.	Integer32	.1.3.6.1.4.1.29601.2.6.1.1.12.1.1
fsQoSEgressIntPrio0ToExpMap This object is used to map the internal priority 0 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.2
fsQoSEgressIntPrio1ToExpMap This object is used to map the internal priority 1 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.3
fsQoSEgressIntPrio2ToExpMap This object is used to map the internal priority 2 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.4
fsQoSEgressIntPrio3ToExpMap This object is used to map the internal priority 3 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.5
fsQoSEgressIntPrio4ToExpMap This object is used to map the internal priority 4 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.6
fsQoSEgressIntPrio5ToExpMap This object is used to map the internal priority 5 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Constraints: range: 1-31	.1.3.6.1.4.1.29601.2.6.1.1.12.1.7
fsQoSEgressIntPrio6ToExpMap This object is used to map the internal priority 6 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.1.12.1.8
fsQoSEgressIntPrio7ToExpMap This object is used to map the internal priority 7 to outgoing Experimental bit.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.1.12.1.9
fsQoSEgressIntPrio0ToDot1pMap This object is used to map the internal priority 0 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.1.12.1.10
fsQoSEgressIntPrio1ToDot1pMap This object is used to map the internal priority 1 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.1.12.1.11
fsQoSEgressIntPrio2ToDot1pMap This object is used to map the internal priority 2 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.1.12.1.12
fsQoSEgressIntPrio3ToDot1pMap This object is used to map the internal priority 3 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.13
fsQoSEgressIntPrio4ToDot1pMap This object is used to map the internal priority 4 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.1.12.1.14
fsQoSEgressIntPrio5ToDot1pMap This object is used to map the internal priority 5 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.15
fsQoSEgressIntPrio6ToDot1pMap This object is used to map the internal priority 6 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.16
fsQoSEgressIntPrio7ToDot1pMap This object is used to map the internal priority 7 to outgoing Dot1P priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.12.1.17
fsQoSEgressExpDot1pMapProfileStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.12.1.18

This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the default DSCP Packet priority to
internal Priority.
Default Mapping Table
DSCP   Internal Priority
0          0
8          1
10         1
14         1
18         2
22         2
24         3
28         3
34         4
36         4
38         4
40         5
46         5
48         6
56         7
Currently this Profile table is supported for BCM and its not supported for Marvell.
Similarly , if any other Chipset supports profile concept, we can use new table
else the user has to use Old Priority mapping table.

fsQoSIngressDscpProfileEntry row .1.3.6.1.4.1.29601.2.6.1.1.13.1

This object specifies the information controlling per Profile configuration for DSCP Bit to Internal Priority .

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSIngressDscpMapProfileIndex This object specifies the index of the table fsQoSIngressDscpMapProfileTable.	Integer32	.1.3.6.1.4.1.29601.2.6.1.1.13.1.1
fsQoSIngressDscpProfileStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.13.1.2

This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the user specified DSCP Packet priority to internal Priority.
Currently this Profile table is supported for BCM and its not supported for Marvell.
Similarly , if any other Chipset supports profile concept, we can use new table
else the user has to use Old Priority mapping table.

fsQoSIngressDscpMapProfileEntry row .1.3.6.1.4.1.29601.2.6.1.1.14.1

This object specifies the information controlling per Profile configuration for DSCP Bit to Internal Priority .

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSIngressDscpCodePoint This object is used to configure DSCP to internal priority mapping. Administrator has the control for mapping all 64 Code point to Internal Priority mapping. This Object is needed only when administrator want different …	Integer32	.1.3.6.1.4.1.29601.2.6.1.1.14.1.1
fsQoSIngressDscpIntPrio This object is used to configure DSCP to internal priority mapping.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.6.1.1.14.1.2
fsQoSIngressDscpMapProfileStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.1.14.1.3

A table to map incoming priority to a regenerated priority. 
This table is used to regenerate port/VLAN priorities for an 
incoming packet. It can be used to directly program priority 
tables in the hardware.

fsQoSPriorityMapEntry row .1.3.6.1.4.1.29601.2.6.1.2.1.1

An entry to map an incoming priority, drop-precedence to a
regenerated priority value for an ingress PORT/VLAN. The PORT/VLAN
indices may take dont-care (0) values as required.

Indexes

IF-MIBifIndex fsQoSPcpPacketType

Column	Syntax	OID
fsQoSPriorityMapID The output priority map index for the incoming packet received over ingress PORT/VLAN with specified incoming priority. This is unique for each entry in the priority-map table.	IndexInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.29601.2.6.1.2.1.1.1
fsQoSPriorityMapName This indicates the Name for the Priority map entry. It should be unique in this Table.	OctetStringr/w	.1.3.6.1.4.1.29601.2.6.1.2.1.1.2
fsQoSPriorityMapIfIndex Incoming Port Number. The PORT may take dont-care (0) values as required.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.2.1.1.3
fsQoSPriorityMapVlanId Vlan Id for Priority regeneration.The VlanId may take dont-care (0) values as required.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.2.1.1.4
fsQoSPriorityMapInPriority The incoming Priority value determined for the received frame. This value is equivalent to the priority( VLAN (4 bit)/DSCP( 6 bit) priority bits) indicated in the received frame, or one of the evaluated priorities.	Integer32r/w	.1.3.6.1.4.1.29601.2.6.1.2.1.1.5
fsQoSPriorityMapInPriType The Incoming Priority Type is used to Identify the 'fsQoSPriorityMapInPriority' value is a vlanPri or IP TOS or IP DSCP or MPLS EXP or dot1P. If the incoming Priority type is 802.1P, the incoming packet priority and …	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.2.1.1.6
fsQoSPriorityMapRegenPriority The Regenerated Priority value determined for the received frame.	Unsigned32r/w Constraints: range: 1-31	.1.3.6.1.4.1.29601.2.6.1.2.1.1.7
fsQoSPriorityMapRegenInnerPriority The Regenerated Inner-VLAN (CVLAN) Priority value determined for the received frame. It the Values is 8 then this object is not configured by user	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.2.1.1.8
fsQoSPriorityMapConfigStatus The status of the prority map entry. Indicates whether entry is configured by management or is a default entry.	Enumeration Constraints: range: 0-10000	.1.3.6.1.4.1.29601.2.6.1.2.1.1.9
fsQoSPriorityMapStatus The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by other table; otherwise returns inconsistentValue error. Fo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.2.1.1.10
fsQoSPriorityMapInDEI This object specifies the Drop_eligible bit in the incoming frames. Either it can take false(0) or true (1). By default, drop_eligible bit is not set.	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.2.1.1.11
fsQoSPriorityMapRegenColor This object specifies the regenerated color determined for the received frame.	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.2.1.1.12

This table contains the Multifield Classifier details. It takes input
from the ACL or priority-map table and outputs a CLASS for the 
traffic-class pattern/match.

fsQoSClassMapEntry row .1.3.6.1.4.1.29601.2.6.1.2.2.1

A Multi-field Classifier entry maps an ACL entry or a priority-map
to a CLASS of Service.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSClassMapId An index that enumerates the MultiField Classifier table.	IndexInteger Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.2.2.1.1
fsQoSClassMapName This indicates the Name for the Entry.Multiple ACL/priority-map entries can map to the same CLASS. They need to be configured with the same ClassMapName.	OctetStringr/w	.1.3.6.1.4.1.29601.2.6.1.2.2.1.2
fsQoSClassMapL2FilterId This Object specifies the ID of the MAC filter, the details of which should be matched against the incoming packet. A valid value of this object is not mandatory for the creation of the conceptual row. However, L2/L3 F…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.2.2.1.3
fsQoSClassMapL3FilterId This Object specifies the ID of the IP filter, the details of which should be matched against the incoming packet. A valid value of this object is not mandatory for the creation of the conceptual row. However, L2/L3 Fi…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.2.2.1.4
fsQoSClassMapPriorityMapId This Object specifies the priority map ID for mapping incoming priority against received packet.A valid value of this object is not mandatory for the creation of the conceptual row. However, L2/L3 FilterId is mutually e…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.2.2.1.5
fsQoSClassMapCLASS This represents the Traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the logical groups that represent this CLASS. Multiple ACL/priority-map entries can map to the same C…	Unsigned32r/w Constraints: range: 1-31	.1.3.6.1.4.1.29601.2.6.1.2.2.1.6
fsQoSClassMapClfrId This represents the Classifier Id of teh Classifier in the Standard Qos Entry. This used to get the datapath entry pointing to teh CLass-Map with respect to the Standard MIB	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.2.2.1.7
fsQoSClassMapPreColor This represents the color of the packet prior to metering. The default Drop-Precedence for the packet can be evaluated using this object. This value is overridden by the meter.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.2.2.1.8
fsQoSClassMapVlanMapId This object specifies the VLAN Map ID for mapping an incoming VLAN to an Egress Subscriber Queue. Filter ID/ Priority-Map Id are mutually exclusive to the Vlan Map Id. One of them is a mandatory input for a class-map en…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.2.2.1.9
fsQoSClassMapStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. CreateAndGo not allowed ,it can be deleted 'destroy', only if it is not referenced by other …	SNMPv2-TCRowStatusr/w Constraints: range: 0-63 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.2.2.1.10

This table assigns local priority values for a input CLASS. This table
is optional and can be configured as per user requirement. This table
is provided for easy mapping of CLASS to priority values. 
A set of non-contiguous CLASS values belong to a 
unique Group ( identified by a group name).

fsQoSClassToPriorityEntry row .1.3.6.1.4.1.29601.2.6.1.2.3.1

An entry to specify a regenerated priority value for a input CLASS.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSClassToPriorityCLASS This represents the Traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the traffic class patterns that represent this CLASS. Multiple ACL/priority-map entries can map to …	IndexInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.29601.2.6.1.2.3.1.1
fsQoSClassToPriorityRegenPri The Regenerated Priority value determined for the input CLASS.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.2.3.1.2
fsQoSClassToPriorityGroupName This is for unique identification of the group to which a input CLASS belongs.	OctetStringr/w	.1.3.6.1.4.1.29601.2.6.1.2.3.1.3
fsQoSClassToPriorityStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. it can be deleted 'destroy', only if it is not referenced by other table; otherwise return inc…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.2.3.1.4

This object specifies a table to map incoming VLAN to a specific subscriber queue of a port.

fsQoSVlanMapEntry row .1.3.6.1.4.1.29601.2.6.1.2.4.1

This object specifies an entry to map an incoming VLAN to a specific
Subscriber Queue of an Egress PORT. The ifIndex
value should be of egress member port of the VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSVlanMapID This object specifies the output VLAN map index for the outgoing packets transmitted over egress PORT with specified VLAN-id. This is unique for each entry in the VLAN-map table.	IndexInteger Constraints: range: 0-1	.1.3.6.1.4.1.29601.2.6.1.2.4.1.1
fsQoSVlanMapIfIndex This object specifies the Egress Port Number. VLAN based subscriber Queuing/Scheduling schema will be created on this port.	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.6.1.2.4.1.2
fsQoSVlanMapVlanId This object specifies the Vlan Id for Subscriber queue mapping. The Vlan Id should already be configured on the switch.	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.6.1.2.4.1.3
fsQoSVlanMapStatus This object specifies the status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by other table; otherwise returns incons…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.2.4.1.4

This object specifies the table containing Qos related Properties specific to an interface.
Currently, we are using this table for storing Priority Code Point
encoding and decoding information.

fsQoSPortEntry row .1.3.6.1.4.1.29601.2.6.1.2.5.1

This object specifies the information controlling per port configuration for Priority Code Point
Encoding and Decoding.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSPcpPacketType This object specifies the incoming packet type for which Priority Code Point Encoding and decoding to be applied.	Enumeration	.1.3.6.1.4.1.29601.2.6.1.2.5.1.1
fsQoSPcpSelRow This object specifies the row to be used on this port for PCP encoding and PCP decoding tables. PCP encoding and PCP decoding on a port will be based on the row configured as per this mib object for this port. This can …	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.2.5.1.2
fsQoSPcpRowStatus This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Constraints: range: 0-7 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.2.5.1.3

This table enumerates specific meters that a system may use to
police a stream of traffic. This may include all traffic on an
interface.

fsQoSMeterEntry row .1.3.6.1.4.1.29601.2.6.1.3.1.1

An entry in the meter table describes a single conformance level
of a meter.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSMeterId An index that enumerates the Meter entries.	IndexInteger Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.6.1.3.1.1.1
fsQoSMeterName This indicates the Name for the meter entry. It should be unique in this Table.	OctetStringr/w	.1.3.6.1.4.1.29601.2.6.1.3.1.1.2
fsQoSMeterType The Metering algorithm associated with the Token Bucket meter.	MeterTyper/w Type Values: 1 simpleTokenBucket 2 avgRate 3 srTCM 4 trTCM 5 tswTCM 6 mefDecoupledMeter 7 mefCoupledMeter	.1.3.6.1.4.1.29601.2.6.1.3.1.1.3
fsQoSMeterInterval The time interval used with the token bucket. For: 1. Average Rate Meter, the Informal Differentiated Services Model section 5.2.1, - Delta. 2. Simple Token Bucket Meter, the Informal Differentiated Services Mode…	microsecondsUnsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.1.1.4
fsQoSMeterColorMode The user defined Meter Color Mode.	MeterColorModer/w Type Values: 1 colorAware 2 colorBlind	.1.3.6.1.4.1.29601.2.6.1.3.1.1.5
fsQoSMeterCIR The committed information rate as per MEF. Must be >= 0. CIR must be less than or equal to EIR, if EIR > 0	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.1.1.6
fsQoSMeterCBS The committed burst size as per MEF. Must be > 0 if CIR > 0. Maximum allowable size will be jumbo frame size.	BytesUnsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.6.1.3.1.1.7
fsQoSMeterEIR The excess information rate as per MEF. Must be >= 0. EIR must be greater than or equal to CIR, if EIR > 0. This is not applicable when MeterType is srtcm.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.6.1.3.1.1.8
fsQoSMeterEBS The excess burst size as per MEF. Must be > 0 if EIR > 0.	BytesUnsigned32r/w Constraints: range: 0-1	.1.3.6.1.4.1.29601.2.6.1.3.1.1.9
fsQoSMeterNext This specifies the meter entry ID to be used for applying the second/next level of conformance on the incoming packet. A valid value of this object is not mandatory for the creation of an entry in the conceptual row.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.6.1.3.1.1.10
fsQoSMeterStatus The status of this conceptual row. All writable objects in this row may be modified only of the Entry is not ACTIVE. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsiste…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.3.1.1.11

This table contains the class-map to policy-map details.

fsQoSPolicyMapEntry row .1.3.6.1.4.1.29601.2.6.1.3.2.1

An entry to map a policy for a class-map.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSPolicyMapId An index that enumerates the policy-map table entries.	IndexInteger Constraints: range: 0-1	.1.3.6.1.4.1.29601.2.6.1.3.2.1.1
fsQoSPolicyMapName This the Name for a policy entry. It should be unique in this Table.	OctetStringr/w Constraints: range: 0-1	.1.3.6.1.4.1.29601.2.6.1.3.2.1.2
fsQoSPolicyMapIfIndex This indicates the incoming interface identifier for which the policy map is applied. A Valid value of this object is not mandatory for the creation of an entry in this table.	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-1	.1.3.6.1.4.1.29601.2.6.1.3.2.1.3
fsQoSPolicyMapCLASS This indicates the Traffic CLASS for which the policy-map needs to be applied. A valid value is not necessary for creation of an entry in this table. When this object is configured as dont-care(0), it is mandatory that…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.3.2.1.4
fsQoSPolicyMapPHBType It indicates the PHB type to be used for filling the Default PHB for the policy-map entry.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.5
fsQoSPolicyMapDefaultPHB It indicate the default out going PHB Values for the Policy-Map. It may be overriden by the Meter used for the policy-map. This value is interpreted by fsQoSPolicyMapPHBType.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.6
fsQoSPolicyMapMeterTableId The Object refers to a Meter table Id which is the index for the Meter table. A Valid value of this object is not mandatory for the creation of an entry in this table.	SNMPv2-SMIUnsigned32r/w Constraints: range: 1-31	.1.3.6.1.4.1.29601.2.6.1.3.2.1.7
fsQoSPolicyMapFailMeterTableId The Object refers to a Meter table Id which is the index of the Meter pointed to by diffServMeterFailNext. A Valid value of this object is not mandatory for the creation of an entry in this table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.3.2.1.8
fsQoSPolicyMapInProfileConformActionFlag This Object defines the action to be performed on the packet, when the packets are found to be In profile.	Bitsr/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.9
fsQoSPolicyMapInProfileConformActionId The Object refers to an Action table Id which is the index for the Action table. This is for the reference of the StdQos mib. where we have to mention an action table for each action. A Valid value of this object is not…	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.10
fsQoSPolicyMapInProfileActionSetPort This Object sets the new port value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new out port value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.3.2.1.11
fsQoSPolicyMapConformActionSetIpTOS This Object sets the new IP TOS value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new IP TOS value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.3.2.1.12
fsQoSPolicyMapConformActionSetDscp This Object sets the new DSCP value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new DSCP value.	Dscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.29601.2.6.1.3.2.1.13
fsQoSPolicyMapConformActionSetVlanPrio Setting the Vlan Priority of the outgoing packet. Setting of Vlan Priority is mutually exclusive to setting of Mpls EXP bits. So setting the Vlan Priority to a non-zero value is only allowed when MplsExp is 0.	Unsigned32r/w Constraints: range: 0-5	.1.3.6.1.4.1.29601.2.6.1.3.2.1.14
fsQoSPolicyMapConformActionSetVlanDE Setting the VLAN Drop Eligible Indicator of the outgoing packet. This is applicable ONLY when MplsExp is 0	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.15
fsQoSPolicyMapConformActionSetInnerVlanPrio Setting the Inner Vlan Priority of the outgoing packet.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.16
fsQoSPolicyMapConformActionSetMplsExp Setting the Mpls Experimental bits of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Mpls EXP to a non 0 value is only allowed when Vlan Prio is 0.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.17
fsQoSPolicyMapConformActionSetNewCLASS This represents the Traffic CLASS to which an incoming frame pattern is classified after metering. The priority of the New CLASS should be lower as compared to the CLASS assigned prior to metering. The administrator n…	SNMPv2-SMIUnsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.29601.2.6.1.3.2.1.18
fsQoSPolicyMapInProfileExceedActionFlag This Object defines the action to be performed on the packet, when the packets are found to be In profile.	Bitsr/w Constraints: range: 0-31	.1.3.6.1.4.1.29601.2.6.1.3.2.1.19
fsQoSPolicyMapInProfileExceedActionId The Object refers to an Action table Id which is the index for the Action table. This is for the reference of the StdQos mib. where we have to mention an action table for each action. A Valid value of this object is not…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.3.2.1.20
fsQoSPolicyMapExceedActionSetIpTOS This Object sets the new IP TOS value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new IP TOS value.	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.29601.2.6.1.3.2.1.21
fsQoSPolicyMapExceedActionSetDscp This Object sets the new DSCP value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new DSCP value.	Dscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.29601.2.6.1.3.2.1.22
fsQoSPolicyMapExceedActionSetInnerVlanPrio Setting the Vlan Priority of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Vlan Priority to a non-zero value is only allowed when MplsExp is 0.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.23
fsQoSPolicyMapExceedActionSetVlanPrio Setting the Inner-Vlan Priority of the outgoing packet.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.24
fsQoSPolicyMapExceedActionSetVlanDE Setting the VLAN Drop Eligible Indicator of the outgoing packet. This is applicable ONLY when MplsEXP is 0.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.25
fsQoSPolicyMapExceedActionSetMplsExp Setting the Mpls Experimental bits of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Mpls EXP to a non-zero value is only allowed when Vlan Prio is 0.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.26
fsQoSPolicyMapExceedActionSetNewCLASS This represents the Traffic CLASS to which an incoming frame pattern is classified after metering. The priority of the New CLASS should be lower as compared to the CLASS assigned prior to metering. The administrator n…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.6.1.3.2.1.27
fsQoSPolicyMapOutProfileActionFlag This Object defines the action to be performed on the packet when the packets are found to be out of profile.	Bitsr/w Constraints: range: 1-31	.1.3.6.1.4.1.29601.2.6.1.3.2.1.28
fsQoSPolicyMapOutProfileActionId The Object refers to an Action table Id which is the index for the Action table. This is for the reference of the StdQos mib. where we have to mention an action table for each action. A Valid value of this object is not…	SNMPv2-SMIUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.29
fsQoSPolicyMapOutProfileActionSetIPTOS This Object sets the new IP TOS value in case the action selected by fsQoSPolicyMapOutProfileActionFlag is to assign a new Ip TOS value.	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.30
fsQoSPolicyMapOutProfileActionSetDscp This Object sets the new DSCP value in case the action selected by fsQoSPolicyMapOutProfileActionFlag is to assign a new DSCP value.	Dscpr/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.31
fsQoSPolicyMapOutProfileActionSetInnerVlanPrio Setting the Vlan Priority of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Vlan Priority to a non-zero value is only allowed when is MplsExp is 0.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.32
fsQoSPolicyMapOutProfileActionSetVlanPrio Setting the Inner Vlan Priority of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Vlan Priority to a non-zero value is only allowed when is MplsExp is 0.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.33
fsQoSPolicyMapOutProfileActionSetVlanDE Setting the VLAN Drop Eligible Indicator of the outgoing packet. This is applicable ONLY when MplsEXP is 0.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.34
fsQoSPolicyMapOutProfileActionSetMplsExp Setting the Mpls Experimental bits of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Mpls EXP to a non-zero value is only allowed when is Vlan Prio is 0.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.35
fsQoSPolicyMapOutProfileActionSetNewCLASS This represents the Traffic CLASS to which an incoming frame pattern is classified after metering. The priority of the New CLASS should be lower as compared to the CLASS assigned prior to metering. The administrator n…	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.36
fsQoSPolicyMapStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.3.2.1.37
fsQoSPolicyMapConformActionSetInnerVlanDE Setting the Inner VLAN Drop Eligible Indicator of the outgoing packet. Either Inner VLAN DE can be set OR Mpls EXP bits can be set. So setting the Inner VLAN DE is only allowed when MplsExp is 0.	Unsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.29601.2.6.1.3.2.1.38
fsQoSPolicyMapExceedActionSetInnerVlanDE Setting the Inner VLAN Drop Eligible Indicator of the outgoing packet. Either Inner VLAN DE can be set OR Mpls EXP bits can be set. So setting the Inner VLAN DE is only allowed when MplsExp is 0.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.3.2.1.39
fsQoSPolicyMapOutProfileActionSetInnerVlanDE Setting the Inner VLAN Drop Eligible Indicator of the outgoing packet. Either Inner VLAN DE can be set OR Mpls EXP bits can be set. So setting the Inner VLAN DE is only allowed when MplsExp is 0.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.40
fsQoSPolicyDefaultVlanDE This object is used to set the VLAN Drop Eligible Indicator of the outgoing packet.	Integer32r/w	.1.3.6.1.4.1.29601.2.6.1.3.2.1.41

The queue template table configures the queue attributes.
The template is re-used for configuring multiple queues.

fsQoSQTemplateEntry row .1.3.6.1.4.1.29601.2.6.1.4.1.1

Each entry in the table is a Queue Template Configuration.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSQTemplateId Queue Template Table Index.	IndexInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.29601.2.6.1.4.1.1.1
fsQoSQTemplateName This the Name for a Entry. It should be unique in this Table.	OctetStringr/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.4.1.1.2
fsQoSQTemplateDropType The type of drop algorithm used by this queue template. The value other(1)requires further specification in some other MIB module. In the tailDrop(2) algorithm, fsQoSQTemplateSize represents the maximum…	Enumerationr/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.4.1.1.3
fsQoSQTemplateDropAlgoEnableFlag Enable/disable Drop Algorithm for Congestion Management	EnableStatusr/w Constraints: range: 1-65535 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.6.1.4.1.1.4
fsQoSQTemplateSize The Queue Size. This must be greater than or equal to the fsQoSRandomDetectCfgMinAvgThresh and less-than/equal to fsQoSRandomDetectCfgMaxAvgThresh if Random Detection is enabled. This is depth in bytes of the queue bein…	bytesUnsigned32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.29601.2.6.1.4.1.1.5
fsQoSQTemplateStatus The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsistentValue error.	SNMPv2-TCRowStatusr/w Constraints: range: 0-15 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.4.1.1.6

A table to configure parameters for Random Detect Algorithm.
The table is Indexed by fsQoSQTemplateId  and
Drop Precedence (DP) (0 - 2).
Each entry represent random detect configurations
per QueueTemplate per Drop Precedence.

fsQoSRandomDetectCfgEntry row .1.3.6.1.4.1.29601.2.6.1.4.2.1

Each entry in the table is a random drop Configuration.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSRandomDetectCfgDP The Drop Precedence [Drop Profile] 0 - low drop precedence[TCP Green Discard] 1 - medium drop precedence[TCP Yellow Discard] 2 - high drop precedence[TCP Red Discard] 3 - [NON-TCP Green Discard] 4 - [NON-TCP Yellow Disc…	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.29601.2.6.1.4.2.1.1
fsQoSRandomDetectCfgMinAvgThresh The minimum average threshold for the random detect algorithm. Below this threshold, packets are admitted into the queue. The units are bits in accordance with Traffic Manager. This must be less than or equal to the …	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.2.1.2
fsQoSRandomDetectCfgMaxAvgThresh The maximum average threshold for the random detect algorithm. Above this threshold, packets are discarded before entering the queue. The units is bits in accordance with Traffic Manager. This must be greater than or eq…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.2.1.3
fsQoSRandomDetectCfgMaxPktSize Maximum allowed Packet Size. The units is bytes.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.4.2.1.4
fsQoSRandomDetectCfgMaxProb Maximum probability of discarding a packet in units of percentage.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.2.1.5
fsQoSRandomDetectCfgExpWeight The exponential Weight for determining the average queue size.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.4.2.1.6
fsQoSRandomDetectCfgStatus The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsistentValue error.	SNMPv2-TCRowStatusr/w Constraints: range: 0-10 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.4.2.1.7
fsQoSRandomDetectCfgGain Gain defines an increase in drop-probability on each granular increase of buffer-occupancy due to received traffic. Determines the smoothing that should be applied.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.4.2.1.8
fsQoSRandomDetectCfgDropThreshType discardpackets(1) sets the WRED drop type to Discard packets. discardbytes(2) sets the WRED drop type to discard in terms of bytes. Value configured for fsQoSRandomDetectCfgMinAvgThresh and fsQoSRandomDetectCfgMaxAvgT…	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.4.2.1.9
fsQoSRandomDetectCfgECNThresh Defines the Queue depth in bytes to stop marking and start dropping ECN eligible packets	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.2.1.10
fsQoSRandomDetectCfgActionFlag This Object defines the additional action flags for the WRED profiles, Setting the flag to capavg(0) never lets the average queue size be bigger than the actual queue size. markcongestion(1) marks the ECN instead of dr…	Bitsr/w	.1.3.6.1.4.1.29601.2.6.1.4.2.1.11

The shape template table configures the shaper attributes.

fsQoSShapeTemplateEntry row .1.3.6.1.4.1.29601.2.6.1.4.3.1

Each entry in the table is a Shape Template Configuration.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSShapeTemplateId Shape Template Table Index.	IndexInteger Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.6.1.4.3.1.1
fsQoSShapeTemplateName This the Name for a Shape template Entry. It should be unique in this Table.	OctetStringr/w Constraints: range: 0-1000	.1.3.6.1.4.1.29601.2.6.1.4.3.1.2
fsQoSShapeTemplateCIR The committed information rate for packets through this queue. Must be > 0.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.3.1.3
fsQoSShapeTemplateCBS The committed burst size for packets through this queue. Must be > 0 when CIR > 0.	BytesUnsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.3.1.4
fsQoSShapeTemplateEIR The Excess information rate for packets through this hierarchy. Must be >= 0. EIR must be greater than or equal to CIR, if EIR > 0. Currently not used, for future use. Agent returns EIR = 0 to represent that this row is…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.3.1.5
fsQoSShapeTemplateEBS The excess burst size for packets through this hierarchy. Must be > 0 when EIR > 0. Currently not used, for future use. Agent returns EBS = 0 to represent that this row is not configured by the manager.	BytesUnsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.3.1.6
fsQoSShapeTemplateStatus The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsistentValue error.	SNMPv2-TCRowStatusr/w Constraints: range: 0-7 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.4.3.1.7

Queue MAP table mapping an egress port, 
CLASS of service to a queue.

fsQoSQMapEntry row .1.3.6.1.4.1.29601.2.6.1.4.4.1

Q MAP Entry mapping a CLASS of service or
RegenPriority from the fsQoSPolicyMapTable to a queue.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSQMapCLASS The input CLASS ( associated with an incoming packet) that needs to be mapped to an outbound queue. This is mutually exclusive to the RegenPriority object. CLASS should be 0 while configuring RegenPriority specific Q.	Unsigned32	.1.3.6.1.4.1.29601.2.6.1.4.4.1.1
fsQoSQMapRegenPriType The regenerated-priority type to interpret the value of 'fsQoSQMapRegenPriority' object. This object should be none while configuring CLASS specific Queue. If fsQoSQMapRegenPriType is internalPrio, then …	Enumeration	.1.3.6.1.4.1.29601.2.6.1.4.4.1.2
fsQoSQMapRegenPriority The regenerated-priority ( for an incoming packet) that needs to be mapped to an outbound queue. This is mutually exclusive to the CLASS configuration. This object should be 0 while configuring CLASS specific Queue.	Unsigned32	.1.3.6.1.4.1.29601.2.6.1.4.4.1.3
fsQoSQMapQId The Queue Identifier that uniquely identifies a queue relative to an interface. It could be configured with a unique value in the system.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.4.1.4
fsQoSQMapStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. It can be deleted/destroyed independent of other Traffic class tables; For any mib table that …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.4.4.1.5
fsQoSQMapRegenDEI This object specifies the Drop_eligible bit in the incoming frames. Either it can take false(0) or true (1). By default, drop_eligible bit is not set.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.4.4.1.6
fsQoSQMapRegenColor This object specifies the regenerated color used in COSQ mapping. Administrator is not allowed to configure the color for Queue Mapping. This object will reflect the color configured in Priority Map.	Enumeration	.1.3.6.1.4.1.29601.2.6.1.4.4.1.7

Table describing the queue parameters

fsQoSQEntry row .1.3.6.1.4.1.29601.2.6.1.4.5.1

Q table entry

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSQId The Queue Identifier that uniquely identifies the queue in the system/port.	Unsigned32	.1.3.6.1.4.1.29601.2.6.1.4.5.1.1
fsQoSQCfgTemplateId The Queue template Id applied for configuring queue attributes.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.5.1.2
fsQoSQSchedulerId The scheduler identifier that manages the specified queue. This identifier is unique relative to an egress interface.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.5.1.3
fsQoSQWeight User assigned weight to the CoS queue. The assigned weights are used only when scheduling algorithm is a weighted scheduling algorithm.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.4.5.1.4
fsQoSQPriority User assigned priority for the CoS queue. The assigned priority is used only when the scheduler uses a priority based scheduling algorithm.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.5.1.5
fsQoSQShapeId The shaper identifier that specifies the bandwidth requirements for the queue. This object is not mandatory for the creation of the row.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.5.1.6
fsQoSQStatus Row Status to Create/Destroy the entry. It can be deleted 'destroy', only if it is not referenced by other dependent tables; otherwise it returns inconsistentValue error.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.4.5.1.7
fsQoSQType This object specifies the type of the queue. 1- Unicast queue 2- Multicast queue	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.5.1.8

Scheduler table

fsQoSSchedulerEntry row .1.3.6.1.4.1.29601.2.6.1.4.6.1

Scheduler table Entry.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSSchedulerId The Scheduler Identifier that uniquely identifies the scheduler in the system/egress interface.	Unsigned32	.1.3.6.1.4.1.29601.2.6.1.4.6.1.1
fsQoSSchedulerSchedAlgorithm Sets the packet scheduling algorithm for the port The default is strictPriority(1).	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.4.6.1.2
fsQoSSchedulerShapeId The shaper identifier that specifies the bandwidth requirements for the scheduler. This object is not mandatory for the creation of the conceptual row.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.6.1.3
fsQoSSchedulerHierarchyLevel This indicates the depth of the queue/scheduler hierarchy. A value of 0 indicates that there is no hierarchy and that all queues/schedulers are port-bound. 0 - No hierarchy 1 - S1 schedulers (attached to the egress p…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.6.1.4
fsQoSSchedulerGlobalId The Scheduler Identifier that uniquely identifies the scheduler in the system/egress interface.This object is used only for creating Scheduler entry from the standard QOS Scheduler table diffServSchedulerTable as defi…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.29601.2.6.1.4.6.1.5
fsQoSSchedulerStatus Row Status to Create/Destroy the entry. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsistentValue error.	SNMPv2-TCRowStatusr/w Constraints: range: 1-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.4.6.1.6

Hierarchy table for specifying the hierarchy details.

fsQoSHierarchyEntry row .1.3.6.1.4.1.29601.2.6.1.4.7.1

Each entry specifies the queue/scheduler details to be used
for the next level hierarchy. The interface index associated with
the NextQ or Next Scheduler is obtained from this table index
- 'ifIndex'.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSHierarchyLevel This indicates the depth of the queue/scheduler hierarchy. A value of 0 indicates that there is no hierarchy and that all queues/schedulers are port-bound.	Unsigned32	.1.3.6.1.4.1.29601.2.6.1.4.7.1.1
fsQoSHierarchyQNext The output of this COSQ is sent to the scheduler attached to the queue. For eg., A packet may flow from a cosq to the schedulers in the following way: COSQ => S3 => S2 => S1 => Egress port. The value of this object …	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.7.1.2
fsQoSHierarchySchedNext The next-level scheduler to which the scheduler output needs to be sent. The value of this object could be unique in the system/port. A valid value is not mandatory for the creation of the conceptual row. This object…	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.7.1.3
fsQoSHierarchyWeight The Weight is specified if the Scheduler is connecting to a WFQ of another Scheduler. Agent returns Weight = 0 to represent that this object is not configured by the manager.	PercentageUnsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.4.7.1.4
fsQoSHierarchyPriority The Scheduler can connect to any of the Priority of the next-level Scheduler. The priority is specified when the scheduler is connecting to any of the priorities ( EF, AF, BE) of the next level strict-priority schedu…	SchedulerPriorityr/w Type Constraints: range: 0..15	.1.3.6.1.4.1.29601.2.6.1.4.7.1.5
fsQoSHierarchyStatus Row Status to Create/Destroy the entry. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsistentValue error.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.4.7.1.6

A table that contains default user priority for an interfae.

fsQoSDefUserPriorityEntry row .1.3.6.1.4.1.29601.2.6.1.4.8.1

Table for configuring default user priority for each port. This is
used for assigning priority to the untagged packets received on the
interface.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSPortDefaultUserPriority The default ingress user priority for this port. It will be used to set priority for an untagged Packets.	Integer32r/w	.1.3.6.1.4.1.29601.2.6.1.4.8.1.1
fsQoSPortPbitPrefOverDscp Specifies the default QoS remarking (trust) mode for a port.	Enumerationr/w	.1.3.6.1.4.1.29601.2.6.1.4.8.1.2
fsQoSPortPbitPrefOverDscpStatic Specifies the default QoS remarking (trust) mode for a port. This object represents the static P-Bit Preference Over DSCP value. When the fsQoSPortPbitPrefOverDscp value is different than the value of t…	Enumeration	.1.3.6.1.4.1.29601.2.6.1.4.8.1.3

A list of Policer Statistics.

fsQoSPolicerStatsEntry row .1.3.6.1.4.1.29601.2.6.1.5.1.1

A collection of statistics kept for a particular Policer.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSPolicerStatsConformPkts Number of Packets marked down as conforming(Green) traffic by this policer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.1.1.1
fsQoSPolicerStatsConformOctets Number of Octets of traffic marked down as conforming(Green) by this policer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.1.1.2
fsQoSPolicerStatsExceedPkts Number of Packets marked down as exceeding(Yellow) traffic by this policer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.1.1.3
fsQoSPolicerStatsExceedOctets Number of Octets of traffic marked down as exceeding(Yellow) by this policer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.1.1.4
fsQoSPolicerStatsViolatePkts Number of Packets marked down as violating(Red) traffic by this policer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.1.1.5
fsQoSPolicerStatsViolateOctets Number of Octets of traffic marked down as violating(Red) by this policer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.1.1.6
fsQoSPolicerStatsStatus Status indicating the Policer Statistics is being Enabled/Disabled for the specific meter. When statistics collection is set to disabled, stops collecting statistics in this table. When sta…	EnableStatusr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.29601.2.6.1.5.1.1.7
fsQoSPolicerStatsClearCounter Resets all the counter variables to initialization value (zero).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.6.1.5.1.1.8

A list of  class-of-service based Queue Statistics for a COS Queue.

fsQoSCoSQStatsEntry row .1.3.6.1.4.1.29601.2.6.1.5.2.1

A collection of CoS Queue statistics for a particular COS queue.

Indexes

No indexes recorded

Column	Syntax	OID
fsQoSCoSQId The COSQ for which the statistics is being collected.	Unsigned32	.1.3.6.1.4.1.29601.2.6.1.5.2.1.1
fsQoSCoSQStatsEnQPkts Number of packets enqueued in this CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.2
fsQoSCoSQStatsEnQBytes Number of bytes enqueued in this CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.3
fsQoSCoSQStatsDeQPkts Number of packets de-queued from this CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.4
fsQoSCoSQStatsDeQBytes Number of bytes de-queued from this CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.5
fsQoSCoSQStatsDiscardPkts Number of packets discarded from this CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.6
fsQoSCoSQStatsDiscardBytes Number of bytes discarded from this CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.7
fsQoSCoSQStatsOccupancy Number of bytes currently occupied in the CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.8
fsQoSCoSQStatsCongMgntAlgoDrop Number of bytes discarded due to congestion management algorithm (RED/WRED) in this CoS Queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.29601.2.6.1.5.2.1.9

Table describing the queue parameters for CPU port

fsQosHwCpuRateLimitEntry row .1.3.6.1.4.1.29601.2.6.1.6.1.1

CPU Rate Limit table entry

Indexes

No indexes recorded

Column	Syntax	OID
fsQosHwCpuQId The Queue Identifier that uniquely identifies the queue in the system/port.	Unsigned32	.1.3.6.1.4.1.29601.2.6.1.6.1.1.1
fsQosHwCpuMinRate This object controls the minimum transmission rate on a cpu port. Min Rate must be less than or equal to Max Rate.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.6.1.1.2
fsQosHwCpuMaxRate This object controls the maximum transmission rate on a cpu port. Max Rate must be greater than or equal to Min Rate.	Unsigned32r/w	.1.3.6.1.4.1.29601.2.6.1.6.1.1.3
fsQosHwCpuRowStatus This object indicates the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.6.1.6.1.1.4