ARC-MIB Table View

A table of Alarm Reporting Control (ARC) settings on the system.
          
Alarm Reporting Control is a feature that provides an automatic
in-service provisioning capability.  Alarm reporting is turned
off on a per-resource basis for a selective set of potential
alarm conditions to allow sufficient time for customer testing
and other maintenance activities in an 'alarm free' state.
Once a resource is ready for service, alarm reporting is
automatically or manually turned on.
          
Functional description and requirements of Alarm Reporting
Control are defined in ITU-T Recommendation M.3100 Amendment 3
[M.3100 Amd3].

arcEntry row .1.3.6.1.2.1.117.2.1.1

A conceptual row that contains information about an ARC setting
of a resource in the system.

Implementation need to be aware that if the total size of
arcIndex and arcNotificationId exceeds 114 sub-IDs, the…

Indexes

arcIndex arcAlarmType arcNotificationId

Column	Syntax	OID
arcIndex This object uniquely identifies a resource, which is under the arcState's control for the associated arcAlarmType. For example, if the resource is an interface, this object will point to an instance of in…	ALARM-MIBResourceId	.1.3.6.1.2.1.117.2.1.1.1
arcAlarmType This object identifies the alarm condition type controlled by the arcState. It specifies the value 0 or a value of IANAItuProbableCause that is applicable to the resource. IANAItuProbableCause is defined in the IANA-IT…	IANAItuProbableCauseOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.117.2.1.1.2
arcNotificationId This object identifies the type of notification to be suppressed. The notification type identified should be the one normally used by the resource for reporting its alarms. When the value of 0.0 is specified for this o…	ObjectIdentifier	.1.3.6.1.2.1.117.2.1.1.3
arcState Defined in M.3100 Amendment 3 [M.3100 Amd3], there are five ARC states: alm, nalm, nalmQI, nalmQICD, and nalmTI. alm: Alarm reporting is turned on (i.e., is allowed). nalm: Alarm report…	Enumerationr/w Enumerated Values: 1 nalm 2 nalmQI 3 nalmTI 4 nalmQICD	.1.3.6.1.2.1.117.2.1.1.4
arcNalmTimeRemaining This variable indicates the time remaining in the nalmTI state or the nalmQICD state, in units of second. At the moment the resource enters the nalmTI state, this variable will have the initial value equa…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.117.2.1.1.5
arcRowStatus This columnar object is used for creating and deleting a conceptual row of the arcTable. It is used to create and delete an arc setting. Setting RowStatus to createAndGo or createAndWait implies creating…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.117.2.1.1.6
arcStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' must allow write-access at a minimum to arcState. Note that arcState must allow change by management request. Therefore, no row can …	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.117.2.1.1.7