APRISAXE-EVENTS-4RF
Event MIB for the AprisaXE project
- Source file
APRISAXE-EVENTS-4RF- Last revised
- Identity
aprisaXE4RFEventModule- Base OID
1.3.6.1.4.1.14817.2.7
Imported Objects
| APRISAXE-MIB-4RF | aprisaXEEvents aprisaXEObjects |
| APRISAXE-TC-4RF | AprisaXEAlarmType AprisaXECardType (no object page) AprisaXEDataStatus AprisaXEPortNumber AprisaXESlotNumber |
| COMMON-TC-4RF | FourRFAlarmEnabled FourRFAlarmPresent FourRFAlarmSeverity FourRFAlarmStatus FourRFHardwareVersion FourRFImageVersion |
| MIB-4RF | fourRFModules |
| PRODUCTS-MIB-4RF | fourRFAprisaXE |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the 4rf MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'APRISAXE-EVENTS-4RF' -M '/opt/observium/mibs/4rf:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'APRISAXE-EVENTS-4RF::aprisaXE4RFEventModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APRISAXE-EVENTS-4RF' -M '/opt/observium/mibs/4rf:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APRISAXE-EVENTS-4RF::aprisaXE4RFEventModule'
Objects (16)
Showing 16 of 16 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.14817.2.7 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.1 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.10 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.15 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.16 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.2 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.3 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.4 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.5 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.6 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.7 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.8 |
||
.1.3.6.1.4.1.14817.7.3.1.2.1000.9 |
||
.1.3.6.1.4.1.14817.7.3.1.3.1 |
||
.1.3.6.1.4.1.14817.7.3.1.3.1.0 |
Dependencies (8) 8 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- MIB-4RF4rf
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- APRISAXE-TC-4RF4rf
- COMMON-TC-4RF4rf
- PRODUCTS-MIB-4RF4rf
- APRISAXE-MIB-4RF4rf
- APRISAXE-EVENTS-4RF4rfselected
Notifications / Traps (66)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.1 |
Event indicating a change in state of a threshold alarm.
It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.10 |
Event indicating a change in state of the Rx synthesizer out of lock alarm.
It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.100 |
Event indicating an mismatch between the MIB and the installed
MUX cards. The radio will not operate correctly if the MIB and MUX cards do not match. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.11 |
Event indicating a change in state of the receiver
characterisation data alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.110 |
Event indicating a change in state of the clock sync state.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.111 |
Event indicating a change in state of the network clock config.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.12 |
Event indicating a change in state of the Rx synthesizer out of lock alarm.
It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.120 |
Event indicating a failed read of characterisation data from
EEPROM. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.121 |
Event indicating a failed read of mib data from EEPROM.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.13 |
Event indicating a change in state of receiver, when it is
turned on or off. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.130 |
Event indicating a Monitored Hot Standby switch to Standby Event.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.131 |
Event indicating an Alternate Image Table Event.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.132 |
Event indicating a Default Image Table Event.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.133 |
Event indicating the failure of the previous upload.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.14 |
Event indicating a change in state of the receiver
MIB data alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.140 |
Event indicating a change in state of the PSC Demux alignment .
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.141 |
Event indicating a change in state of the PSC TDM alignment.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.142 |
Event indicating if the TDM mux loses alignment to the TDM bus.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.143 |
Event indicating that the HRSD Companion transmitter has failed.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.144 |
Event indicating a software override of the PSC Mode Switch.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.145 |
Event indicating that the PSC Mode Switch value is invalid.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.150 |
Event indicating a change in LOS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.151 |
Event indicating a change in AIS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.160 |
Event indicating a change in LOS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.161 |
Event indicating a change in AIS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.170 |
Event indicating that an OID failed its comparison check.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.171 |
Event indicating that the HRSD Companion Heartbeat is lost.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.20 |
Event indicating a change in state of the transmitter
characterisation data alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.21 |
Event indicating a change in state of the transmitter
synthesiser out of lock alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.22 |
Event indicating a change in state of the transmitter
28V supply status alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.23 |
Event indicating a change in state of the transmitter
11V supply status alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.24 |
Event indicating a change in state of the transmitter
5V digital supply status alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.25 |
Event indicating a change in state of the transmitter
amplifier balance status alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.26 |
Event indicating a change in state of the transmitter
MIB data alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.27 |
Event indicating a change in state of the transmitter
Negative 5V digital supply status alarm. |
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.30 |
Event indicating a change in state of the modem lock.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.31 |
Event indicating a change in state of the modem TDM alignment.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.32 |
Event indicating a change in state of the modem demodulator alignment.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.33 |
Event indicating a change in state of the Ref A clock.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.34 |
Event indicating a change in state of the Ref B clock.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.35 |
Event indicating the presence of uncorrectable errors.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.40 |
Event indicating a change in LOS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.41 |
Event indicating a change in AIS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.42 |
Event indicating a change in RAI state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.43 |
Event indicating a change in RMAI state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.44 |
Event indicating a change in TS16AIS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.45 |
Event indicating a change in TS16LOS state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.46 |
Event indicating a change in loss of frame state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.50 |
Event indicating a change in Codec Ovld state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.51 |
Event indicating a change in Billing Tone Ovld state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.52 |
Event indicating a change in Current Ovld state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.53 |
Event indicating a change in Unplug state for a port.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.60 |
Event indicating a common mode error during Pro-SLIC initialisation.
|
|
|
aprisaXEFXSDCDCErrorEvent
obsolete
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.61 |
Event indicating a DC-DC converter error during Pro-SLIC initialisation
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.62 |
Event indicating the FPGA has not locked onto a CAS frame.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.70 |
Event indicating an HSS TDM Lock error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.71 |
Event indicating a 32MHz clock reset error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.72 |
Event indicating a TDM reset error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.73 |
Event indicating a Pattern Loss error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.74 |
Event indicating an Rx FIFO Full error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.75 |
Event indicating an Rx FIFO Empty error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.76 |
Event indicating a Tx FIFO Full error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.77 |
Event indicating a Tx FIFO Empty error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.78 |
Event indicating an Rx Clock Valid error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.79 |
Event indicating a Tx Clock Valid error.
|
|
.1.3.6.1.4.1.14817.7.3.1.3.1.0.80 |
Event indicating V24 control line aren't in sync.
|