APM-MIB Table View

The APM MIB directory of applications and application
verbs. The agent will populate this table with all
applications/verbs of any responsivenessType it has the
capability to monitor. Since the agent populates this table
with every entry it has the capability to monitor, the
entries in this table are read-write, allowing the management
station to modify parameters in this table but not to add new
entries or delete entries (however, entries may be
disabled). If new entries are added to the apmHttpFilterTable
or the apmUserDefinedAppTable, the agent will add the
corresponding entries to this table.
          
It is an implementation-dependent matter as to how the agent
sets these default parameters. For example, it may leave
certain entries in this table 'off(0)' if the agent developer
          
believes that combination will be infrequently used, allowing
a manager that needs that capability to set it to 'on(1)'.
          
Some applications are registered in the RMON2 protocol
directory and some are registered in other tables in this
MIB Module. Regardless of where an application is originally
registered, it is assigned an AppLocalIndex value that is the
primary index for this table.
          
The contents of this table affect all reports and exceptions
generated by this agent. Accordingly, modification of this
table should be performed by a manager acting in the role of
administrator. In particular, management software should not
require or enforce particular configuration of this table - it
should reflect the preferences of the site administrator, not
the software author. As a practical matter, this requires
management software to allow the administrator to configure
the values it will use so that it can be adapted to the site
policy.

apmAppDirEntry row .1.3.6.1.2.1.16.23.1.1.1

The APM MIB directory of applications and application
verbs. An entry will exist in this table for all applications
for which application performance measurement is supported.

Indexes

apmAppDirAppLocalIndex apmAppDirResponsivenessType

Column	Syntax	OID
apmAppDirAppLocalIndex The AppLocalIndex assigned for this application Directory entry.	AppLocalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.2.1.16.23.1.1.1.1
apmAppDirResponsivenessType This object describes and configures the agent's support for application performance measurement for this application. There are 3 types of measurements for different types of applications: Transaction-Or…	Enumeration Enumerated Values: 1 transactionOriented 2 throughputOriented 3 streamingOriented	.1.3.6.1.2.1.16.23.1.1.1.2
apmAppDirConfig This object describes and configures support for application performance measurement for this application. If the value of this object is on(2), the agent supports measurement of application performance m…	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.2.1.16.23.1.1.1.3
apmAppDirResponsivenessBoundary1 The boundary value between bucket1 and bucket 2. If this value is modified, all entries in the apmReportTable must be deleted by the agent. The value of this object must persist across reboots.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.1.1.4
apmAppDirResponsivenessBoundary2 The boundary value between bucket2 and bucket 3. If this value is modified, all entries in the apmReportTable must be deleted by the agent. The value of this object must persist across rebo…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.1.1.5
apmAppDirResponsivenessBoundary3 The boundary value between bucket3 and bucket 4. If this value is modified, all entries in the apmReportTable must be deleted by the agent. The value of this object must persist across reboots.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.1.1.6
apmAppDirResponsivenessBoundary4 The boundary value between bucket4 and bucket 5. If this value is modified, all entries in the apmReportTable must be deleted by the agent. The value of this object must persist across reboots.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.1.1.7
apmAppDirResponsivenessBoundary5 The boundary value between bucket5 and bucket 6. If this value is modified, all entries in the apmReportTable must be deleted by the agent. The value of this object must persist across reboots.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.1.1.8
apmAppDirResponsivenessBoundary6 The boundary value between bucket6 and bucket 7. If this value is modified, all entries in the apmReportTable must be deleted by the agent. The value of this object must persist across rebo…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.1.1.9

A table that creates virtual applications which measure the
performance of certain web pages or sets of web pages.
          
When an entry is added to this table, the agent will
automatically create one or more entries in the
apmAppDirTable (one for each responsivenessType it is
capable of measuring).
          
Note that when entries exist in this table some HTTP
transactions will be summarized twice: in applications
represented here as well as the HTTP application. If entries
in this table overlap, these transactions may be summarized
additional times.
          
The contents of this table affect all reports and exceptions
generated by this agent. Accordingly, modification of this
table should be performed by a manager acting in the role of
administrator. In particular, management software should not
require or enforce particular configuration of this table - it
should reflect the preferences of the site administrator, not
the software author.

apmHttpFilterEntry row .1.3.6.1.2.1.16.23.1.4.1

A virtual application which measure the performance of certain
web pages or sets of web pages.

Indexes

apmHttpFilterIndex

Column	Syntax	OID
apmHttpFilterIndex An index that uniquely identifies an entry in the apmHttpFilterTable.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.2.1.16.23.1.4.1.1
apmHttpFilterAppLocalIndex The AppLocalIndex that represents HTTP transactions that match this entry. This object is read-only. A value is created by the agent from an unused AppLocalIndex value when this apmHttpFilterEntry is crea…	AppLocalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.2.1.16.23.1.4.1.2
apmHttpFilterServerProtocol The protocolDirLocalIndex value of the network level protocol of the apmHttpFilterServerAddress.	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.16.23.1.4.1.3
apmHttpFilterServerAddress This entry will only represent transactions coming from the network address specified in this object. This is represented as an octet string with specific semantics and length as identified by the associa…	ProtocolDirNetworkAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.16.23.1.4.1.4
apmHttpFilterURLPath This entry will only represent HTTP transactions where the URL path component in the request matches this value. This value represents the requested path regardless of any substitution that the server might perform. …	OctetStringr/w Constraints: range: 0-65535	.1.3.6.1.2.1.16.23.1.4.1.5
apmHttpFilterMatchType The matching algorithm used to compare the URL pathname. If the value is exact(1), then the pathname component will be compared with the associated apmHttpFilterURLPath and will only be associated with th…	Enumerationr/w Enumerated Values: 1 exact 2 stripTrailingSlash 3 prefix	.1.3.6.1.2.1.16.23.1.4.1.6
apmHttpFilterOwner The entity that configured this entry and is therefore using the resources assigned to it.	RMON-MIBOwnerStringr/w Type Constraints: range: 0..127	.1.3.6.1.2.1.16.23.1.4.1.7
apmHttpFilterStorageType The storage type of this apmHttpFilterEntry. If the value of this object is 'permanent', no objects in this row need to be writable.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.16.23.1.4.1.8
apmHttpFilterRowStatus The status of this apmHttpFilterEntry. No objects in this row may be modified while the row's status is 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.16.23.1.4.1.9

A table that advertises user-defined applications that the
agent is measuring.
          
The agent will automatically create one or more entries in the
apmAppDirTable (one for each responsivenessType it is
capable of measuring) for each entry in this table.
          
Note that when entries exist in this table some
transactions can be summarized more than once if there is
overlap between applications defined here and applications
defined in the protocol directory or in the httpFilter table.

apmUserDefinedAppEntry row .1.3.6.1.2.1.16.23.1.7.1

A user-defined application that the agent is measuring, along
with its AppLocalIndex assignment.

The apmAppDirAppLocalIndex value in the index identifies
the agent-assigned AppLocalIndex value for this user…

Indexes

apmAppDirAppLocalIndex

Column	Syntax	OID
apmUserDefinedAppParentIndex The protocolDirLocalIndex value of the highest-layer protocol defined in the protocolDirTable that this application is a child of.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.16.23.1.7.1.1
apmUserDefinedAppApplication A human readable descriptive tag for this application.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.16.23.1.7.1.2

A client machine may have multiple addresses during a period
of monitoring. The apmNameTable assigns a long-lived
identifier to a client and records what addresses were
assigned to that client for periods of time. Various
implementation techniques exist for tracking this mapping but
if an agent is unable to track client address mappings, it may
map client identifiers to client addresses rather than to
distinct client machines.
          
A particular apmNameClientID should be a constant attribute of
a particular client. When available, the agent may also record
the machine name and/or user name which may be valuable for
displaying to humans. The apmNameMachineName and
apmNameUserName are relatively constant, changing only if
these attributes actually change on the client.
          
The agent will store a historical log of these entries, aging
out old entries as the log becomes too large. Since this table
contains information vital to the interpretation of other
tables (e.g., the apmReportTable), the agent should ensure that
          
the log doesn't age out entries that would be referenced by
data in those tables.
          
Note that an entry for a clientID is active from its
StartTime until the StartTime of another entry (for the same
clientID) that supersedes it, or 'now' if none supersede
it. Therefore, if a clientID only has a single entry, it is by
definition very new and should never be aged out. No entry for
a clientID should be aged out unless it has been updated by a
new entry for the client (i.e., with an updated address) and
only if the new entry is 'old' enough.
          
To determine how old is old enough, compute the maximum value
of Interval * (NumReports + 1) of all entries in the
apmReportControlTable (the '+ 1' is to allow a reasonable
period of time for the report to be downloaded). Then take the
larger of this value and the age in seconds of the oldest
entry in the current transaction table. If an entry for a
clientID is superseded by another entry whose StartTime is
more than this many seconds ago, then the older entry may be
deleted.

apmNameEntry row .1.3.6.1.2.1.16.23.1.8.1

An entry in the APM name table. An entry exists for each
period of time that a client has been associated with a
particular address.

The protocolDirLocalIndex value in the index identifies
the network layer…

Indexes

apmNameClientID RMON2-MIBprotocolDirLocalIndex apmNameClientAddress apmNameMappingStartTime

Column	Syntax	OID
apmNameClientID A unique ID assigned to the machine represented by this mapping. This ID is assigned by the agent using an implementation-specific algorithm.	RmonClientID Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.8.1.1
apmNameClientAddress The network client address for this client when this mapping was active. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of t…	OctetString Constraints: range: 1-255	.1.3.6.1.2.1.16.23.1.8.1.2
apmNameMappingStartTime The time that the agent first discovered this mapping as active.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.16.23.1.8.1.3
apmNameMachineName The human readable name of the client machine. If the client has no machine name or the agent is unable to learn the machine name, this object will be a zero-length string.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.16.23.1.8.1.4
apmNameUserName The human readable name of a human user using the client machine. If more than one user name are available simultaneously, it is an implementation-dependent matter as to which is used here. However, if the user name cha…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.16.23.1.8.1.5

Parameters that control the creation of a set of reports that
aggregate application performance.

apmReportControlEntry row .1.3.6.1.2.1.16.23.1.9.1

A conceptual row in the apmReportControlTable.

An example of the indexing of this table is

apmReportControlInterval.3

Indexes

apmReportControlIndex

Column	Syntax	OID
apmReportControlIndex An index that uniquely identifies an entry in the apmReportControlTable. Each such entry defines a unique report whose results are placed in the apmReportTable on behalf of this apmReportControlEntry.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.16.23.1.9.1.1
apmReportControlDataSource The source of the data for APM Reports generated on behalf of this apmReportControlEntry. If the measurement is being performed by a probe, this should be set to interface or port where data was received …	DataSourceOrZeror/w	.1.3.6.1.2.1.16.23.1.9.1.2
apmReportControlAggregationType The type of aggregation being performed for this set of reports. The metrics for a single transaction are the responsiveness of the transaction and whether the transaction succeeded (a boolean). When such…	TransactionAggregationTyper/w Type Values: 1 flows 2 clients 3 servers 4 applications	.1.3.6.1.2.1.16.23.1.9.1.3
apmReportControlInterval The interval in seconds over which data is accumulated before being aggregated into a report in the apmReportTable. All reports with the same apmReportControlIndex will be based on the same interval. This object must b…	SecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.9.1.4
apmReportControlRequestedSize The number of entries requested to be allocated for each report generated on behalf of this entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.9.1.5
apmReportControlGrantedSize The number of entries per report the agent has allocated based on the requested amount in apmReportControlRequestedSize. Since multiple reports are saved, the total number of entries allocated will be this number multip…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.9.1.6
apmReportControlRequestedReports The number of saved reports requested to be allocated on behalf of this entry.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.16.23.1.9.1.7
apmReportControlGrantedReports The number of saved reports the agent has allocated based on the requested amount in apmReportControlRequestedReports. Since each report can have many entries, the total number of entries allocated will be this number m…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.2.1.16.23.1.9.1.8
apmReportControlStartTime The value of sysUpTime when the system began processing the report in progress. Note that the report in progress is not available. This object may be used by the management station to figure out the start…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.16.23.1.9.1.9
apmReportControlReportNumber The number of the report in progress. When an apmReportControlEntry is activated, the first report will be numbered one.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.16.23.1.9.1.10
apmReportControlDeniedInserts The number of failed attempts to add an entry to reports for this apmReportControlEntry because the number of entries would have exceeded apmReportControlGrantedSize. This number is valuabl…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.9.1.11
apmReportControlDroppedFrames The total number of frames which were received by the agent and therefore not accounted for in the *StatsDropEvents, but for which the agent chose not to count for this entry for whatever reason. Most often, this event…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.9.1.12
apmReportControlOwner The entity that configured this entry and is therefore using the resources assigned to it.	RMON-MIBOwnerStringr/w Type Constraints: range: 0..127	.1.3.6.1.2.1.16.23.1.9.1.13
apmReportControlStorageType The storage type of this apmReportControlEntry. If the value of this object is 'permanent', no objects in this row need to be writable.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.16.23.1.9.1.14
apmReportControlStatus The status of this apmReportControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. The only objects in the entry that may be modified while the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.16.23.1.9.1.15

The data resulting from aggregated APM reports. Consult the
definition of apmReportControlAggregationType for the
definition of the various types of aggregations.

apmReportEntry row .1.3.6.1.2.1.16.23.1.10.1

A conceptual row in the apmReportTable.
The apmReportControlIndex value in the index identifies the
apmReportControlEntry on whose behalf this entry was created.
The apmReportIndex value in the index identifies which re…

Indexes

apmReportControlIndex apmReportIndex apmAppDirAppLocalIndex apmAppDirResponsivenessType RMON2-MIBprotocolDirLocalIndex apmReportServerAddress apmNameClientID

Column	Syntax	OID
apmReportIndex The value of apmReportControlReportNumber for the report to which this entry belongs.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.16.23.1.10.1.1
apmReportServerAddress The network server address for this apmReportEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. …	ProtocolDirNetworkAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.16.23.1.10.1.2
apmReportTransactionCount The total number of transactions aggregated into this record.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.3
apmReportSuccessfulTransactions The total number of successful transactions aggregated into this record.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.4
apmReportResponsivenessMean The arithmetic mean of the responsiveness metrics for all successful transactions aggregated into this record.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.5
apmReportResponsivenessMin The minimum of the responsiveness metrics for all successful transactions aggregated into this record.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.6
apmReportResponsivenessMax The maximum of the responsiveness metrics for all successful transactions aggregated into this record.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.7
apmReportResponsivenessB1 The number of successful transactions aggregated into this record whose responsiveness was less than boundary1 value for this application.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.8
apmReportResponsivenessB2 The number of successful transactions aggregated into this record whose responsiveness did not fall into Bucket 1 and was greater than or equal to the boundary1 value for this application and less than the boundary2 val…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.9
apmReportResponsivenessB3 The number of successful transactions aggregated into this record whose responsiveness did not fall into Bucket 1 or 2 and as greater than or equal to the boundary2 value for this application and less than the boundary3…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.10
apmReportResponsivenessB4 The number of successful transactions aggregated into this record whose responsiveness did not fall into Buckets 1 through 3 and was greater than or equal to the boundary3 value for this application and less than the bo…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.11
apmReportResponsivenessB5 The number of successful transactions aggregated into this record whose responsiveness did not fall into Buckets 1 through 4 and was greater than or equal to the boundary4 value for this application and less than the bo…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.12
apmReportResponsivenessB6 The number of successful transactions aggregated into this record whose responsiveness did not fall into Buckets 1 through 5 and was greater than or equal to the boundary5 value for this application and less than the bo…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.13
apmReportResponsivenessB7 The number of successful transactions aggregated into this record whose responsiveness did not fall into Buckets 1 through 6 and was greater than or equal to the boundary6 value for this application.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.10.1.14

This table contains transactions that are currently running
or have recently finished.

apmTransactionEntry row .1.3.6.1.2.1.16.23.1.11.1

A conceptual row in the apmTransactionTable.

The apmAppDirAppLocalIndex value in the index identifies
the application of the transaction represented by this entry.
The apmAppDirResponsivenessType value in t…

Indexes

apmAppDirAppLocalIndex apmAppDirResponsivenessType RMON2-MIBprotocolDirLocalIndex apmTransactionServerAddress apmNameClientID apmTransactionID

Column	Syntax	OID
apmTransactionServerAddress The network server address for this apmTransactionEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. This o…	OctetString Constraints: range: 1-255	.1.3.6.1.2.1.16.23.1.11.1.1
apmTransactionID A unique value for this transaction amongst other transactions sharing the same application layer protocol and server and client addresses. Implementations may choose to use the value of the client's source port, when p…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.16.23.1.11.1.2
apmTransactionResponsiveness The current value of the responsiveness metric for this transaction. If this transaction has completed, the final value of the metric will be available. Note that this value may change over the lifetime o…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.11.1.3
apmTransactionAge If this transaction is still executing, this value shall be the length of time since it was started. If it has completed, this value shall be the length of time it was executing.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.16.23.1.11.1.4
apmTransactionSuccess The success of this transaction up to this time. Once a transaction has been marked as failed, it cannot move back into the successful state.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.16.23.1.11.1.5

This table creates filters so that a management station can
get immediate notification of a transaction that has had poor
          
availability or responsiveness.
          
Each apmExceptionEntry is associated with a particular type of
transaction and is applied to all transactions of that
type. Multiple apmExceptionEntries may be associated with a
particular type of transaction. A transaction type is
identified by the value of the apmAppDirAppLocalIndex
component of the index.
          
Because the quality of a transaction is not known until it is
completed, these thresholds are only applied after the
transaction has completed.

apmExceptionEntry row .1.3.6.1.2.1.16.23.1.13.1

A conceptual row in the apmExceptionTable.

The apmAppDirAppLocalIndex value in the index identifies
the application this entry will monitor.
The apmAppDirResponsivenessType value in the index
identifies the…

Indexes

apmAppDirAppLocalIndex apmAppDirResponsivenessType apmExceptionIndex

Column	Syntax	OID
apmExceptionIndex An index that uniquely identifies an entry in the apmExceptionTable amongst other entries with equivalent index values for apmAppDirAppLocalIndex and apmAppDirResponsivenessType. Each such entry sets up thresholds for a…	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.16.23.1.13.1.1
apmExceptionResponsivenessComparison If this value is greater(2) or less(3), the associated apmExceptionResponsivenessThreshold will be compared to this value and an exception will be created if the responsiveness is greater than the threshold (greater(2))…	Enumerationr/w Enumerated Values: 1 none 2 greater 3 less	.1.3.6.1.2.1.16.23.1.13.1.2
apmExceptionResponsivenessThreshold The threshold that responsiveness metrics are compared to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.13.1.3
apmExceptionUnsuccessfulException If this value is on(2), an exception will be created if a transaction of the associated type is unsuccessful.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.2.1.16.23.1.13.1.4
apmExceptionResponsivenessEvents The total number of responsiveness exceptions generated. This counter will be incremented even if no notification was sent due to notifications not being configured or due to exceeding the apmNotificationMaxRate value.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.13.1.5
apmExceptionUnsuccessfulEvents The total number of unsuccessful exceptions generated. This counter will be incremented even if no notification was sent due to notifications not being configured or due to exceeding the apmNotificationMaxRate value.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.16.23.1.13.1.6
apmExceptionOwner The entity that configured this entry and is therefore using the resources assigned to it.	RMON-MIBOwnerStringr/w Type Constraints: range: 0..127	.1.3.6.1.2.1.16.23.1.13.1.7
apmExceptionStorageType The storage type of this apmReportControlEntry. If the value of this object is 'permanent', no objects in this row need to be writable.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.16.23.1.13.1.8
apmExceptionStatus The status of this apmExceptionEntry. The only objects in the entry that may be modified while the entry is in the active state are apmExceptionResponsivenessComparison, apmExceptionResponsivenessThreshold and apmExcept…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.16.23.1.13.1.9