ALVARION-PUBLIC-ACCESS-MIB Table View

Provides information on the user's authentication
method. In tabular form to allow multiple instances on an
agent.

publicAccessUsersConfigEntry row .1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1

An entry in the table.

Indexes

publicAccessUsersConfigIndex

Column	Syntax	OID
publicAccessUsersConfigIndex Index of a user profile in the publicAccessUsersConfigTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.1
publicAccessUsersConfigAuthenType Indicates the mechanism used to authenticate users.	ALVARION-TCAlvarionUsersAuthenticationType Type Values: 1 mac 2 ieee802dot1x 3 html	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.2
publicAccessUsersConfigAuthenMode Specifies how the user authentication is performed. It can be done with the local user list or via a AAA server profile. If both are enabled, the local user list is checked first.	ALVARION-TCAlvarionUsersAuthenticationMode Type Values: 0 none 1 local 2 profile 3 localAndProfile	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.3
publicAccessUsersConfigAuthenProfileIndex Specifies the AAA profile to use for user authentication when publicAccessUsersAuthenMode is set to 'profile' or 'localAndProfile'.	ALVARION-TCAlvarionProfileIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.4
publicAccessUsersConfigAuthenTimeout Logins are refused if the AAA server does not respond within this time period. Only applies when coVirtualApUserAccessAuthenMode is set to 'profile' or 'localAndProfile' and when the users are authenticated via 'HTML' …	secondsUnsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.5
publicAccessUsersConfigAccountingEnabled Indicates if accounting information is generated by the device and sent to the AAA server for public access users. Accounting information is generated only if a valid AAA server profile is configured for publicAccessU…	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.6
publicAccessUsersConfigAccountingProfileIndex Identifies the AAA profile to send accounting to for public access users. When zero is specified, the value set inside publicAccessDeviceAuthenProfileIndex is used instead.	ALVARION-TCAlvarionProfileIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.7
publicAccessUsersConfigInterfaceIndex Indicates the local interface on which these configuration parameters apply. This attribute is used with the publicAccessUsersConfigVirtualApProfileIndex to uniquely identify an entry in Virtual AP indexed tables.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.8
publicAccessUsersConfigVirtualApProfileIndex Indicates a user's VAP profile currently associated with these configuration parameters. This attribute is used with the publicAccessUsersConfigInterfaceIndex to uniquely identify an entry in Virtual AP indexed tables.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.9

A table containing specific information for users authenticated
by the authentication system. In tabular form to allow
multiple instances on an agent.

publicAccessUserEntry row .1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1

Information about a particular user that has been authenticated
by the authentication system.
publicAccessUserIndex - Uniquely identifies a user in the
table.

Indexes

publicAccessUserIndex

Column	Syntax	OID
publicAccessUserIndex Index of a user in the publicAccessUserTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.1
publicAccessUserAuthenType Indicates the mechanism used to authenticate the user.	ALVARION-TCAlvarionUsersAuthenticationType Type Values: 1 mac 2 ieee802dot1x 3 html	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.2
publicAccessUserAuthenMode Specifies how user authentication is performed. It can be done using a local user list defined on the device or AAA server profile. If both modes are active the local user list is checked first.	ALVARION-TCAlvarionUsersAuthenticationMode Type Values: 0 none 1 local 2 profile 3 localAndProfile	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.3
publicAccessUserState Indicates the current state of the user.	Enumeration Enumerated Values: 0 unassigned 1 connecting 2 connected 3 reconnecting 4 disconnecting 5 disconnected 6 disconnectingAdministrative 7 disconnectedAdministrative	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.4
publicAccessUserStationIpAddress Indicates the user's IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.5
publicAccessUserName Indicates the user's name.	OctetString Constraints: range: 0-253	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.6
publicAccessUserSessionStartTime Indicates when this user session was started.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.7
publicAccessUserSessionDuration Indicates how long the user's session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.8
publicAccessUserIdleTime Indicates for how long the user's session has been idle. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.9
publicAccessUserBytesSent Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.10
publicAccessUserBytesReceived Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.11
publicAccessUserPacketsSent Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.12
publicAccessUserPacketsReceived Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.13
publicAccessUserForceDisconnection Setting this attribute to 'adminReset' disconnects the user with a cause of ADMIN_RESET. Reading this variable always return 'idle'.	Enumerationr/w Enumerated Values: 0 idle 1 adminReset	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.14
publicAccessUserStationMacAddress Indicates the user's MAC Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.15
publicAccessUserApMacAddress Indicates the user's Access Point MAC Address when Location- Aware is enabled or the Access Controller MAC Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.16
publicAccessUserGroupName Indicates the user's Access Point Group Name (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-Length string is returned.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.17
publicAccessUserSSID Indicates the user's Access Point SSID (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-Length string is returned.	ALVARION-TCAlvarionSSIDOrNone Type Constraints: range: 0..32	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.18
publicAccessUserSecurity Specifies the user's security mode.	ALVARION-TCAlvarionSecurity Type Values: 0 unknown 1 none 2 wep 3 ieee802dot1x 4 ieee802dot1xWithWep 5 wpa 6 wpaPsk	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.19
publicAccessUserPHYType Specifies the user's radio type.	Enumeration Enumerated Values: 0 unknown 1 ieee802dot11a 2 ieee802dot11b 3 ieee802dot11g	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.20
publicAccessUserVLAN Specifies the VLAN currently assigned to the user.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.21
publicAccessUserApRadioIndex Indicates the radio to which this user is associated. The index 0 is reserved when location aware is not enabled or not properly configured. It means that the system could not determine on which interface the user is co…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.22
publicAccessUserConfigIndex Indicates the configuration profile in the publicAccessUsersConfigTable currently associated with this user. When location aware is not enabled or not properly configured, the first SSID of the first radio interface is …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.23
publicAccessUserConnectedInterface Indicates the device's logical public interface to which the user is connected. This will always be a string containing 'br0'.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.24
publicAccessUserBytesSentDropped Indicates the total number of bytes sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.25
publicAccessUserBytesReceivedDropped Indicates the total number of bytes received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.26
publicAccessUserPacketsSentDropped Indicates the total number of packets sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.27
publicAccessUserPacketsReceivedDropped Indicates the total number of packets received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.28
publicAccessUserRateLimitationEnabled Specifies if rate limitation is enabled for the user.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.29
publicAccessUserMaxTransmitRate Specifies the maximum transmit rate for the user.	Integer32 Constraints: range: 100-1000000	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.30
publicAccessUserMaxReceiveRate Specifies the maximum receive rate for the user.	Integer32 Constraints: range: 100-1000000	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.31
publicAccessUserBandwidthControlLevel Specifies the user's bandwidth control level.	ALVARION-TCAlvarionPriorityQueue Type Values: 1 low 2 normal 3 high 4 veryHigh	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.32
publicAccessUserNASPort Specifies the NAS-Port value assigned to the user.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.33

A table containing specific information for NAS-Port
by the Access Controller. In tabular form to allow
multiple instances on an agent.

publicAccessNASPortEntry row .1.3.6.1.4.1.12394.1.10.5.1.1.4.2.1

Information about a particular NAS-Port
by Access Controller.
publicAccessNASPortIndex - Uniquely identifies a NAS-Port in the
table.

Indexes

publicAccessNASPortIndex

Column	Syntax	OID
publicAccessNASPortIndex Index of a NAS-Port in the publicAccessNASPortTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.12394.1.10.5.1.1.4.2.1.1
publicAccessNASPortUserName Indicates the user's name currently authenticated by the Access Controller on this NAS-Port.	OctetString Constraints: range: 0-253	.1.3.6.1.4.1.12394.1.10.5.1.1.4.2.1.2