ALU-SERVICE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
20
Rows
20
Columns
118
aeSapIpipeInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.1
·
1 row entry
·
5 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aeSapIpipeInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aeSapIpipeInfoTable'
An extension table that contains IPIPE specific SAP information for 7705 series routers.
IPIPE specific information about a SAP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of aeSapIpipeIpcpAssignCeAddress specifies whether or not
the configured CE IP address for this IPIPE will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address.… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.1.1.1 |
||||||||||||||
|
The value of aeSapIpipeIpcpPriDnsAddrType specifies the type of
aeSapIpipeIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. This object can be set to non-default o… |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.1.1.2 |
||||||||||||||
|
The value of aeSapIpipeIpcpPriDnsAddr specifies the IP address that will
be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address … |
OctetStringr/w Constraints: range: 0-0range: 16-16range: 4-4 |
.1.3.6.1.4.1.6527.6.1.2.2.6.1.1.3 |
||||||||||||||
|
The value of aeSapIpipeIpcpSecDnsAddrType specifies the type of
aeSapIpipeIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. This object can be set to non-default … |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.1.1.4 |
||||||||||||||
|
The value of aeSapIpipeIpcpSecDnsAddr specifies the IP address that will
be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this addres… |
OctetStringr/w Constraints: range: 16-16range: 4-4range: 0-0 |
.1.3.6.1.4.1.6527.6.1.2.2.6.1.1.5 |
aeSapTlsInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.2
·
1 row entry
·
3 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aeSapTlsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aeSapTlsInfoTable'
An extension table that contains TLS specific SAP information for 7705 series routers.
TLS specific information about a SAP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of aeSapTlsPPPoEIncludeCircuitId specifies whether or not
the agent-circuit-id as per RFC 4679 will be inserted into PPPoE PADI and PADR messages. This value may only be set when the sap encapsu… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.2.1.1 |
||||
|
The value of aeSapTlsPPPoECircuitId indicates the the agent-circuit-id
as per RFC 4679 to be inserted into PPPoE PADI and PADR messages. This value is only valid when aeSapTlsPPPoEIncludeCircuitId is 't… |
OctetString Constraints: range: 1-65 |
.1.3.6.1.4.1.6527.6.1.2.2.6.2.1.2 |
||||
|
The value of aeSapTlsForceCVlanForwarding specifies whether or not
the c-tag will be perserve when forwarding to uplink dot1q sap or vlan spoke sdp. This value may only be set when the sap encapsulation … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.2.1.3 |
aeSapTlsAtmInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.3
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aeSapTlsAtmInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aeSapTlsAtmInfoTable'
An extension table that contains TLS specific SAP information for 7705 series routers.
TLS specific information about a SAP.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
This object specifies the subscriber vlan tag value on a ATM sap
for this TLS service. The default value (0xfff) means invalid vlan tag. |
Unsigned32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6527.6.1.2.2.6.3.1.1 |
aeSvcTlsInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.4
·
1 row entry
·
2 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aeSvcTlsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aeSvcTlsInfoTable'
An extension table that contains TLS specific SVC information for 7705 series routers.
TLS specific information about a Service.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of aeSvcTlsPPPoEIncludeCircuitId specifies whether or not
the agent-circuit-id as per RFC 4679 will be inserted by default into PPPoE PADI and PADR messages of SAPs with an encapsulation of 'atmEncap'. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.4.1.1 |
||||
|
The value of aeSvcTlsL4Hashing specifies whether or not
L4 hashing for TLS Ethernet services |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.4.1.2 |
aeSapApipeAtmInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.6
·
1 row entry
·
2 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aeSapApipeAtmInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aeSapApipeAtmInfoTable'
An extension table that contains Apipe Atm specific SAP information for 7705 series routers.
Atm specific information about a SAP.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
Unique translated Vpi value in NGT1 PW service
|
ATM-TC-MIBAtmVpIdentifierr/w Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.6527.6.1.2.2.6.6.1.1 |
|
Unique translated Vci value in NGT1 PW service
|
ATM-TC-MIBAtmVcIdentifierr/w Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.6527.6.1.2.2.6.6.1.2 |
aeSvcSapAGInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.7
·
1 row entry
·
7 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aeSvcSapAGInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aeSvcSapAGInfoTable'
A table that contains SAP aggregation group information. Only one group can be created per service. This group is used to associate all N>1's SAP's group.
SAP aggregation group information about a N>1 service.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of the object aeSvcSapAGName specifies the name of
the SAP aggregation group. The name must be unique within a Apipe service, however the same name can appear in different Apipe services, in which case they… |
TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32 |
.1.3.6.1.4.1.6527.6.1.2.2.6.7.1.1 |
||||||||||||
|
The value of the object aeSvcSapAGRowStatus specifies the
status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, there should be no… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.6.1.2.2.6.7.1.2 |
||||||||||||
|
Generic information about this SAP aggregation group.
|
TIMETRA-SERV-MIBServObjDescr/w Type Constraints: range: 0..80 |
.1.3.6.1.4.1.6527.6.1.2.2.6.7.1.3 |
||||||||||||
|
The value of the object aeSvcSapAGIngressQosPolicyId specifies
the row index in the aeSvcSapAGInfoTable corresponding to this ingress QoS policy, or one if no policy is specified. The value 0 is needed for mirror SAP… |
TIMETRA-TC-MIBTSapIngressPolicyIDr/w | .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.4 |
||||||||||||
|
The value of the object aeSvcSapAGEgressQosPolicyId specifies
the row index in the aeSvcSapAGInfoTable corresponding to this ingress QoS policy, or one if no policy is specified. |
TIMETRA-TC-MIBTSapEgressPolicyIDr/w Type Constraints: range: 1..65539 |
.1.3.6.1.4.1.6527.6.1.2.2.6.7.1.5 |
||||||||||||
|
When the value of this object is 'true' the agent
collects accounting statistics on this N>1 SAP. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.7.1.6 |
||||||||||||
|
This object specifies the policy to use to collect
accounting statistics on this N>1 SAP. The value zero indicates that the agent should use the default accounting policy, if one exists. |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.7.1.7 |
aluSapAGBaseStatsTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.8
·
1 row entry
·
29 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapAGBaseStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapAGBaseStatsTable'
A table that contains basic statistics of a SAP Aggregation Group.
Basic statistics about a specific
SAP Aggregation Group.
SAP Aggregation Group.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The number of packets dropped in ingress due to:
SAP state, bad checksum, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.1 |
|
The number of octets dropped in ingress due to:
SAP state, bad checksum, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.2 |
|
The number of high priority packets
offered, as determined by the SAP Aggregation Group's ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.3 |
|
The number of high priority octets
offered, as determined by the SAP Aggregation Group's ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.4 |
|
The number of low priority packets
offered, as determined by the SAP Aggregation Group's ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.5 |
|
The number of low priority octets
offered, as determined by the SAP Aggregation Group's ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.6 |
|
The number of high priority packets,
as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.7 |
|
The number of high priority octets,
as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.8 |
|
The number of low priority packets,
as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.9 |
|
The number of low priority octets,
as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.10 |
|
The number of in-profile packets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.11 |
|
The number of in-profile octets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.12 |
|
The number of out-of-profile packets
(rate above CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.13 |
|
The number of out-of-profile octets
(rate above CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.14 |
|
The number of in-profile packets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.15 |
|
The number of in-profile octets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.16 |
|
The number of out-of-profile packets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.17 |
|
The number of out-of-profile octets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.18 |
|
The number of in-profile packets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.19 |
|
The number of in-profile octets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.20 |
|
The number of out-of-profile packets
(rate above CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.21 |
|
The number of out-of-profile octets
(rate above CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.22 |
|
The number of cells received with vpi/vci
that is not defined under vcid-translation. The cells with unknown vpi/vci are dropped. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.23 |
|
The Customer ID for the associated service.
|
TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.24 |
|
The number of uncolored packets offered,
as determined by the SAP ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.25 |
|
The number of uncolored octets offered,
as determined by the SAP ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.26 |
|
The number of DHCP packets discarded
as result of authentication. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.27 |
|
The number of DHCP packets successfully authenticated.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.28 |
|
The value of aluSapAGBaseStatsLastClearedTime
Indicates the sysUpTime when the counters in this table were last cleared. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.6.1.2.2.6.8.1.29 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9
·
1 row entry
·
16 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapAGIngQosQStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapAGIngQosQStatsTable'
A table that contains ingress QoS queue SAP Aggregation Group statistics.
Ingress statistics about a specific SAP
Aggregation Group?s QoS queue.
Aggregation Group?s QoS queue.
| Column | Syntax | OID |
|---|---|---|
|
The index of the ingress QoS queue of
this SAP Aggregation Group. |
TIMETRA-SERV-MIBTSapIngQueueId Type Constraints: range: 1..32 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.1 |
|
The number of high priority packets,
offered as determined by the SAP Aggregation Group ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.2 |
|
The number of high priority packets,
as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.3 |
|
The number of low priority packets,
offered as determined by the SAP Aggregation Group ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.4 |
|
The number of low priority packets,
as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.5 |
|
The number of high priority octets,
offered as determined by the SAP Aggregation Group ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.6 |
|
The number of low priority octets,
as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.7 |
|
The number of low priority octets,
offered as determined by the SAP Aggregation Group ingress QoS policy. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.8 |
|
The number of low priority octets,
as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.9 |
|
The number of in-profile packets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.10 |
|
The number of out-of-profile packets
(rate above CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.11 |
|
The number of in-profile octets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.12 |
|
The number of out-of-profile octets
(rate above CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.13 |
|
The Customer ID for the associated service.
|
TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.14 |
|
The number of uncolored packets offered to the ingress.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.15 |
|
The number of uncolored octets offered to
the ingress. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.9.1.16 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10
·
1 row entry
·
10 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapAGEgrQosQStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapAGEgrQosQStatsTable'
A table that contains egress QoS queue SAP Aggregation Group statistics.
Egress statistics about a specific SAP
Aggregation Group's QoS queue.
Aggregation Group's QoS queue.
| Column | Syntax | OID |
|---|---|---|
|
The index of the egress QoS queue of
this SAP Aggregation Group. |
TIMETRA-SERV-MIBTSapEgrQueueId Type Constraints: range: 1..8 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.1 |
|
The number of in-profile packets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.2 |
|
The number of in-profile packets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.3 |
|
The number of in-profile packets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.4 |
|
The number of in-profile packets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.5 |
|
The number of in-profile octets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.6 |
|
The number of in-profile octets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.7 |
|
The number of out-of-profile octets
(rate below CIR) forwarded. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.8 |
|
The number of out-of-profile octets
discarded due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.9 |
|
The Customer ID for the associated service.
|
TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.6527.6.1.2.2.6.10.1.10 |
aluSapEthCfmTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.11
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapEthCfmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapEthCfmTable'
A table that contains SAP Ethernet CFM Group.
Ethernet DFM Information specific to a SSAP
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Enable/Disable MEPs on this SAP on failure of port link.
aluSapEthCfmHoldMepUp can only be enabled on one SAP per EPIPE service. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.11.1.1 |
aluSapEpipeInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.12
·
1 row entry
·
4 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapEpipeInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapEpipeInfoTable'
An extension table that contains EPIPE specific SAP information for 7705 series routers.
EPIPE specific information about a SAP.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of aluSapEpipeMwCompression specifies whether or not
a SAP on a Microwave Link has radio compression enabled. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.12.1.1 |
||||
|
The value of aluSapEpipeMwDestMacAddress specifies the destination
MAC address to be used during compression on a microwave link. This object can only be set when compression is enabled. |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.6.1.2.2.6.12.1.2 |
||||
|
The value of aluSapEpipeMwSrcMacAddress specifies the source
MAC address to be used during compression on a microwave link. This object can only be set when compression is enabled. |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.6.1.2.2.6.12.1.3 |
||||
|
The value of aluSapEpipeMwCompression specifies whether or not
RTP is enabled on a Microwave Link SAP when radio compression is enabled enabled. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.12.1.4 |
aluSapBaseInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.13
·
1 row entry
·
14 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapBaseInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapBaseInfoTable'
An extension table that contains SAP Base Information for 7705 series routers.
Information about a SAP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The value of aluSapIngressSchedulerMode indicates the mode that the
ingress scheduler is provisioned for this SAP to operate in. All MDAs are initialized with a valid aluSapIngressSchedulerMode, however i… |
AluSapSchedulerModer/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.1 |
||||||
|
The value of aluSapEgressSchedulerMode indicates the mode that the
egress scheduler is provisioned for this SAP to operate in. All MDAs are initialized with a valid aluSapEgressSchedulerMode, however it … |
AluSapSchedulerModer/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.2 |
||||||
|
The value of the object aluSapIngressAggCir specifies the CIR of all
ingress queues for this SAP. aluSapIngressAggCir cannot be modified from its default value on a SAP with aluSapIngressSchedulerMode be… |
kbpsALU-QOS-MIBAluSapSchedulerCirr/w Type Constraints: range: -1..10000000 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.3 |
||||||
|
The value of the object aluSapEgressAggCir specifies the CIR of all
egress queues for this SAP. aluSapEgressAggCir cannot be modified from its default value on a SAP with aluSapEgressSchedulerMode bei… |
kbpsALU-QOS-MIBAluSapSchedulerCirr/w Type Constraints: range: -1..10000000 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.4 |
||||||
|
The value of the object aluSapIngressAggRateLimit
specifies the maximum total rate of all ingress queues for this SAP. The value '-1' means that there is no limit. aluSapIngressAggRateLimit cannot be modi… |
kbpsInteger32r/w Constraints: range: 1-10000000range: -1--1 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.5 |
||||||
|
The value of the object aluSapEgressAggRateLimit
specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit. aluSapEgressAggRateLimit cannot be… |
kbpsInteger32r/w Constraints: range: -1--1range: 1-10000000 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.6 |
||||||
|
aluSapIngressShaperGroup is one of the shaper groups defined within the
shaper policy associated with the access ingress MDA object aluExtTmnxMDAAccessIngShaperPolicy. If aluExtTmnxMDAAccessIngShaperPolic… |
TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.7 |
||||||
|
aluSapEgressShaperGroup is one of the shaper groups defined within the
shaper policy associated with the access egress port object aluExtPortEtherAccEgrShaper. If aluExtPortEtherAccEgrShaper is a an empt… |
TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.8 |
||||||
|
The CIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapIngressAggCirPercent is set to non-default value when the object aluSapIngressAggRateType is set to 'kbps'. |
hundredths of a percentUnsigned32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.9 |
||||||
|
The CIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapEgressAggCirPercent is set to non-default value when the object aluSapEgressAggRateType is set to 'kbps'. |
hundredths of a percentUnsigned32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.10 |
||||||
|
The PIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapIngressAggRatePercent is set to non-default value when the object aluSapIngressAggRateType is set to 'kbps'. |
hundredths of a percentUnsigned32r/w Constraints: range: 1-10000 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.11 |
||||||
|
The PIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapEgressAggRatePercent is set to non-default value when the object aluSapEgressAggRateType is set to 'kbps'. |
hundredths of a percentUnsigned32r/w Constraints: range: 1-10000 |
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.12 |
||||||
|
The value of aluSapIngressAggRateType specifies the type of sap ingress
aggregate-rate. When the value of aluSapIngressAggRateType is set to 'kbps', the ingress aggregate rates are specified in kbps usin… |
TIMETRA-TC-MIBTBWRateTyper/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.13 |
||||||
|
The value of aluSapEgressAggRateType specifies the type of sap egress
aggregate-rate. When the value of aluSapEgressAggRateType is set to 'kbps', the egress aggregate rates are specified in kbps, using v… |
TIMETRA-TC-MIBTBWRateTyper/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.13.1.14 |
aluSapEthLoopbackTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.14
·
1 row entry
·
6 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapEthLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapEthLoopbackTable'
An extension table that contains testhead SAP Loopback Information for 7705 series routers.
Information about a testhead Loopback SAP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
aluSapEthLoopback is used to specify if the sap is set into a loopback mode for testhead
purpose. if true, either aluSapEthLoopbackDuration or aluSapEthLoopbackPersistent has to be set at the same time. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.14.1.1 |
||||
|
aluSapEthLoopbackDuration is used to specify the time duration, in seconds, to set the sap
into a testhead loopback mode. Setting aluSapEthLoopbackDuration to a non-zero value must be accompanied by setting aluSapEthL… |
Unsigned32r/w Constraints: range: 30-86400range: 0-0 |
.1.3.6.1.4.1.6527.6.1.2.2.6.14.1.2 |
||||
|
aluSapEthLoopbackPersistent is used to specify if the sap loopback configuration should be saved.
if true, save the config. When aluSapEthLoopbackPersistent is set to 'true', aluSapEthLoopbackDuration CAN NOT be set to … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.14.1.3 |
||||
|
aluSapEthLoopbackTimeLeft is used to specify the number of seconds left since the loopback has started.
0 if aluSapEthLoopbackTimeLeft as assigned 0, or when aluSapEthLoopback is 'false'. |
Unsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.6.1.2.2.6.14.1.4 |
||||
|
The value of the object aluSapEthLoopbackMode specifies how
traffic will be reflected. If the value is set to 'line(1)', traffic arriving at the SAP ingress will be reflected back out the same SAP. If the… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.14.1.5 |
||||
|
The value of the object aluSapEthLoopbackMacSwap specifies the
enabling or disabling of source address and destination address swapping for the reflected packets when the arriving packet is unicast. With aluSapEthLoopba… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.14.1.6 |
aluSapCemInfoTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.15
·
1 row entry
·
5 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapCemInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapCemInfoTable'
An extend table that contains sar7705 specific CEM SAP information.
Additional SAR Information about a specific CEM SAP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of the object aluSapCemAsymDelayEnable specifies the
enabling or disabling of the asymetric delay control. |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.15.1.1 |
||||||||||||
|
The value of the object aluSapCemAsymDelaySamples specifies the
number of packets being sampled during the sampling period when asymetric delay control is enabled. one, two, four or eight corresponds to 1024, 2048, 20… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.15.1.2 |
||||||||||||
|
The value of the object aluSapCemAsymDelayRepeatPeriod specifies the
sampling/adjusting period in minutes when the asymetric delay control is enabled. value zero disables the periodic sampling |
Integer32r/w Constraints: range: 0-1440 |
.1.3.6.1.4.1.6527.6.1.2.2.6.15.1.3 |
||||||||||||
|
The value of the object aluSapCemSerialRate indicates the
bit-rate of the 'unstructuredSerial' CEM SAP. |
bits/sSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.15.1.4 |
||||||||||||
|
The value of aluSapCemOnDemandADC, when set to 'doAction(1)', triggers
on demand ADC. |
TIMETRA-TC-MIBTmnxActionTyper/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.15.1.5 |
aluSapCemStatsTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.16
·
1 row entry
·
2 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSapCemStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSapCemStatsTable'
An extend table that contains sar7705 specific CEM SAP stats.
Additional SAR Stats for a specific CEM SAP.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The value of aluSapCemStatsEgressSamplingDoneCnt indicates
the number of times sampling is done for asym delay control. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.16.1.1 |
|
The value of aluSapCemStatsEgressAdjustDoneCnt indicates
the number of times adjustment is done for asym delay control. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.16.1.2 |
aluSdpBindStatsTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.17
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSdpBindStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSdpBindStatsTable'
An extended table that contains 7705 SAR specific SDP Binding stats.
Additional 7705 SAR stats for a specific SDP Binding.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The value of aluSdpBindBaseStatsEgressDroppedPackets indicates
the number of packets dropped egressing the sdp binding. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.17.1.1 |
aluSvcEpipeTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.18
·
1 row entry
·
2 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluSvcEpipeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluSvcEpipeTable'
The extended svcEpipeTable contains objects related to 'epipe'
services.
Entries are created and destroyed when 'epipe' services
are created and destroyed by the system.
Extension of svcEpipeEntry, each row entry contains objects that
allows the modification of the 'epipe' specific objects.
allows the modification of the 'epipe' specific objects.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of aluSvcEpipeTeidHashing specifies service-level teid
hashing for Ethernet services. |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.18.1.1 |
||||
|
The value of aluSvcEpipeL4Hashing specifies service-level L4
hashing for Ethernet services. |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.18.1.2 |
aeSdpBindCpipeTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.19
·
1 row entry
·
6 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aeSdpBindCpipeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aeSdpBindCpipeTable'
The extended table sdpBindCpipeTable contains 7705 SAR
specific objects related to a cpipe SDP Bind.
A row will exist in this table for each cpipe sdpBind
configured on this system. Rows are created and deleted
automatically by the system.
Additional 7705 SAR objects related to a cpipe SDP Bind.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of the object aeSdpBindCpipeLocalAsymDelay indicates
whether Asymmetic Delay Control (ADC) is enabled locally. This value is transmitted to the remote peer. |
TIMETRA-TC-MIBTmnxEnabledDisabled Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.19.1.1 |
||||
|
The value of the object aeSdpBindCpipePeerAsymDelay indicates
whether Asymmetic Delay Control (ADC) is enabled remotely. This value is received from the remote peer. If there is no remote peer, or if the … |
TIMETRA-TC-MIBTmnxEnabledDisabled Type Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.6.19.1.2 |
||||
|
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
local jitter buffer size in milliseconds (ms). |
millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.19.1.3 |
||||
|
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
remote jitter buffer size in milliseconds (ms). If there is no remote peer, or if the label mapping has not been received, or if this … |
millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.19.1.4 |
||||
|
The value of the object aeSdpBindCpipeLocalSerialRate indicates the
local Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s. |
bits/sSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.19.1.5 |
||||
|
The value of the object aeSdpBindCpipePeerSerialRate indicates the
remote Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s. If there is no remote peer, or if the label mapping has not been re… |
bits/sSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.6.19.1.6 |
aluExtSapBaseStatsTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.20
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluExtSapBaseStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluExtSapBaseStatsTable'
An extension table that contains 7705 SAR specific SAP stats.
Additinal 7705 SAR stats for a specific SAP.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The value of aluExtSapBaseStatsEgressDroppedPackets indicates
the number of packets dropped egressing the SAP. When sapType is ies or vprn, aluExtSapBaseStatsEgressDroppedPackets is always 0 as this stat count is not av… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.6.20.1.1 |
aluExtSapEthCfmTable
table.1.3.6.1.4.1.6527.6.1.2.2.6.21
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluExtSapEthCfmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SERVICE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SERVICE-MIB::aluExtSapEthCfmTable'
An extension table that contains 7705 SAR informationn pertaining to Ethernet Connectivity Fault Management (CFM) for Service Access Points (SAPs).
Additional 7705 SAR objects related to the Ethernet CFM information
for a given Ethernet encapsulated SAP.
for a given Ethernet encapsulated SAP.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Enable/Disable MEPs on this SAP on failure of port link.
aluExtSapEthCfmHoldMepUp can only be enabled on one SAP per service. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.6.21.1.1 |