ALU-REMOTE-MONITORING-MIB Table View

The aluRMTriggerTable has an entry for each provisioned 
external alarm input in the system that that may be 
used to monitor remote-site equipment.

aluRMTriggerEntry row .1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1

Each row entry represents a external alarm trigger.

Rows are created and destroyed based on the provisioned hardware
in the system that is equipped with input alarm-connectors.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluRMTriggerID

Column	Syntax	OID
aluRMTriggerID aluRMTriggerID identifies the Remote Site Monitoring trigger. The value of this object is calculated using the TiMOS encoding scheme described in AluRMExtAlarmID.	AluRMExtAlarmID	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.1
aluRMTriggerName The textual name of the trigger. The value of this object should be the name of the trigger as assigned by the local device and should be suitable for use in commands entered at the device's `console'.	TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.2
aluRMTriggerAdminStatus aluRMTriggerAdminStatus specifies whether monitoring is enabled or disabled on this trigger.	AluRMAdminStatusr/w Type Values: 0 unknown 1 disabled 2 enabled	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.3
aluRMTriggerOperStatus aluRMTriggerOperStatus indicates the current operational alarm status of the trigger.	AluRMOperStatus Type Values: 0 unknown 1 ghost 2 not-monitored 3 ok 4 active	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.4
aluRMTriggerDescription A textual string containing user supplied information about the trigger.	TIMETRA-TC-MIBTItemLongDescriptionr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.5
aluRMTriggerDetectDebounce aluRMTriggerDetectDebounce specifies the amount of time to debounce the reporting of the triggers. This guards against excessive reporting of trigger transitions.	secondsUnsigned32r/w Constraints: range: 0-60	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.6
aluRMTriggerClearDebounce aluRMTriggerClearDebounce specifies the amount of time to debounce the reporting of the triggers. This guards against excessive reporting of trigger transitions.	secondsUnsigned32r/w Constraints: range: 0-60	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.7
aluRMTriggerAnalogVoltage aluRMTriggerAnalogVoltage indicates the current voltage on analog triggers.	millivoltageSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.8
aluRMTriggerDigitalState aluRMTriggerDigitalState indicates the current contact state on digital triggers.	Enumeration Enumerated Values: 0 unknown 1 closed 2 open	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.9
aluRMTriggerAlias aluRMTriggerAlias is a unique name that identifies the trigger.	AluRMAliasr/w Type Constraints: range: 0..15	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.10
aluRMTriggerDigitalNorm aluRMTriggerDigitalNorm indicates the normal contact state of digital triggers.	Enumerationr/w Enumerated Values: 0 unknown 1 normally-closed 2 normally-open	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.11
aluRMTriggerRowStatus aluRMTriggerRowStatus specifies the status of this row. Only auxilary alarm triggers (Ports.. etc) can be created and destroyed.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.1.2.2.11.1.1.1.12

The aluRMRelayTable has an entry for each provisioned 
output relay connector in the system that that may be 
used to control remote-site equipment.

aluRMRelayEntry row .1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1

Each row entry represents a remote-monitoring output
relay.

Rows are created and destroyed based on the provisioned hardware
in the system that is equipped with relay-connectors.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluRMRelayID

Column	Syntax	OID
aluRMRelayID aluRMRelayID identifies an output relay. The value of this object is calculated using the TiMOS encoding scheme described in AluRMExtAlarmID.	AluRMExtAlarmID	.1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1.1
aluRMRelayName The textual name of the relay. The value of this object should be the name of the relay as assigned by the local device and should be suitable for use in commands entered at the device's `console'.	TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1.2
aluRMRelayMode aluRMRelayMode specifies the mode that the relay will operate in. When a relay is in 'continuous' mode it will be always active when it is not administratively disabled using aluRMTriggerAdminStatus. When a relay is in…	Enumerationr/w Enumerated Values: 1 continuous 2 triggered	.1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1.3
aluRMRelayAdminStatus aluRMRelayAdminStatus specifies the administrative status of this relay.	AluRMAdminStatusr/w Type Values: 0 unknown 1 disabled 2 enabled	.1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1.4
aluRMRelayOperStatus aluRMRelayOperStatus indicates the current operational alarm status of the relay.	AluRMOperStatus Type Values: 0 unknown 1 ghost 2 not-monitored 3 ok 4 active	.1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1.5
aluRMRelayDescription A textual string containing user supplied information about the relay.	TIMETRA-TC-MIBTItemLongDescriptionr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1.6
aluRMRelayAlias aluRMRelayAlias is a unique name that identifies the relay.	AluRMAliasr/w Type Constraints: range: 0..15	.1.3.6.1.4.1.6527.6.1.2.2.11.1.2.1.7

The aluRMAlarmTable contains information about each Alarm condition
being monitored by Remote Site Monitoring.

aluRMAlarmEntry row .1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1

Each row entry represents a Remote Site Monitoring Alarm.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluRMAlarmID

Column	Syntax	OID
aluRMAlarmID aluRMAlarmID identifies the Remote Site Monitoring Alarm.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.1
aluRMAlarmRowStatus aluRMAlarmRowStatus specifies the status of this row. To delete an entry from this table, the alarm must be adminstatively disabled.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.2
aluRMAlarmAdminStatus aluRMAlarmAdminStatus specifies the administrative status of this alarm.	AluRMAdminStatusr/w Type Values: 0 unknown 1 disabled 2 enabled	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.3
aluRMAlarmOperStatus aluRMAlarmOperStatus indicates the current operational status of the alarm.	AluRMOperStatus Type Values: 0 unknown 1 ghost 2 not-monitored 3 ok 4 active	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.4
aluRMAlarmDescription A textual string containing user supplied information about the alarm. This description is used as part of the log event generated by the	TIMETRA-TC-MIBTItemLongDescriptionr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.5
aluRMAlarmTriggerRule aluRMAlarmTriggerRule specifies the rule used by Remote-Monitoring to determine if the criteria has been met to raise or clear this alarm. A value of 'any-trigger' means that the alarm is raised when any trigger occurs…	Enumerationr/w Enumerated Values: 1 any-trigger 2 all-triggers	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.6
aluRMAlarmTrigger1 aluRMAlarmTrigger1 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.7
aluRMAlarmTrigger2 aluRMAlarmTrigger2 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.8
aluRMAlarmTrigger3 aluRMAlarmTrigger3 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.9
aluRMAlarmTrigger4 aluRMAlarmTrigger4 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.10
aluRMAlarmTrigger5 aluRMAlarmTrigger5 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.11
aluRMAlarmTrigger6 aluRMAlarmTrigger6 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.12
aluRMAlarmTrigger7 aluRMAlarmTrigger7 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.13
aluRMAlarmTrigger8 aluRMAlarmTrigger8 identifies a trigger for this alarm.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.14
aluRMAlarmSeverity aluRMAlarmSeverity specifies the severity of this alarm.	Enumerationr/w Enumerated Values: 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.15
aluRMAlarmActionLog aluRMAlarmActionLog specifies if a log event is generated as a result of this alarm.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.16
aluRMAlarmActionAlarmRelay aluRMAlarmActionAlarmRelay specifies if the alarm LEDs and alarm output relays located on the chassis are updated as a result of this alarm.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.17
aluRMAlarmActionAuxRelay aluRMAlarmActionAuxRelay specifies if an auxiliary alarm relay is triggered/controlled as a result of this alarm. This object must be set with aluRMAlarmAuxRelay	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.18
aluRMAlarmAuxRelay aluRMAlarmAuxRelay identifies the relay that is triggered/ controlled by this alarm when aluRMAlarmActionAuxRelay is set to 'true'.	AluRMExtAlarmIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.19
aluRMAlarmDetectedTriggers aluRMAlarmDetectedTriggers is a bitmask that identifies the currently detected triggers on this alarm. The bitmask is based on the trigger index assigned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.20
aluRMAlarmTHAnalogLevelOperation aluRMAlarmTHAnalogLevelOperation indicates the operation to be performed to determine if aluRMAlarmTHAnalogLevel is crossed. The operation can not be 'not-monitored' while there are analog triggers confi…	Enumerationr/w Enumerated Values: 0 not-monitored 1 greater-than 2 less-than	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.21
aluRMAlarmTHAnalogLevel aluRMAlarmTHAnalogLevel indicates the analog voltage threshold of all analog triggers of this alarm.	millivoltsInteger32r/w Constraints: range: 0-75000	.1.3.6.1.4.1.6527.6.1.2.2.11.1.3.1.22