ALU-POWER-ETHERNET-MIB Table View

A table of objects that display and control the power
characteristics power Ethernet ports on a Power Source
Entity (PSE) device. This group will be implemented in
managed power Ethernet switches and mid-span devices.

pethPsePortEntry row .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1

A set of objects that display and control the power
characteristics of a power Ethernet PSE port.

Indexes

pethPsePortGroupIndex pethPsePortIndex

Column	Syntax	OID
pethPsePortGroupIndex This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices . pethPseMi…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.1
pethPsePortIndex This variable uniquely identifies the power Ethernet PSE port within group pethPseGroupIndex to which the power Ethernet PSE entry is connected.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.2
pethPsePortAdminEnable Enables power supply on this port. Setting this object at a value enable(1) enables power and detection mechanism for this port. Setting this object at a value disable(2) disables power for this port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.3
pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the power pairs	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.4
pethPsePortPowerPairs Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that the…	Enumerationr/w Enumerated Values: 1 signal 2 spare	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.5
pethPsePortPowerDetectionControl Controls the power detection mechanism of the port. Setting the value auto(1) enables the power detection mechanism of the port. Setting the value test(2) puts the port in a testmode: force continuous discovery without …	Enumerationr/w Enumerated Values: 1 auto 2 test	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.6
pethPsePortDetectionStatus Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state IDLE A value of searching(2)- indicates that the PSE State diagram is in the state …	Enumeration Enumerated Values: 1 disabled 2 searching 4 deliveringPower 5 fault 7 test 8 denyLowPriority	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.7
pethPsePortPowerPriority This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations …	Enumerationr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.8
pethPsePortPowerMaintenanceStatus The value ok(1) indicates the Power Maintenance Signature is present and the overcurrent condition has not been detected. The value overCurrent (2) indicates an overcurrent condition has been detected. The value mPSAbse…	Enumeration Enumerated Values: 1 ok 2 underCurrent 3 mPSAbsent	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.10
pethPsePortMPSAbsentCounter Counts the number of times that the pethPsePortPowerMaintenanceStatus attribute changes from any value to the value mPSAbsent(3).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.11
pethPsePortOverCurrentCounter Counts the number of times that the aPSEPowerCurrentStatus attribute changes from any value to the value overCurrent(2).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.12
pethPsePortType A manager will set the value of this variable to a value that indicates the type of the device that is connected to theport. This value can be the result of the mapping the address of the station connected to the port a…	Enumerationr/w Enumerated Values: 1 other 2 telephone 3 webcam 4 wireless	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.13
pethPsePortPowerClassifications Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.14

A table of objects that display and control the power
characteristics power Ethernet ports on a Powered
Device(PD) device. This group will be implemented in
managed powered and mid-span devices.

pethPdPortEntry row .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.2.1

A set of objects that display and control the power
characteristics of a Powered Device port.

Indexes

pethPdPortIndex

Column	Syntax	OID
pethPdPortIndex An index value that uniquely identifies an interface to a PD device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. The mapping between th…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.2.1.1
pethPdPortAdminEnable This value identifies the operational state of the PD functions. An interface which can provide the PD functions will be enabled to do so when this attribute has the value enable. When this attribute has the value disa…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.2.1.2

A table of objects that display and control the Main power
on a PSE  device. Example - an Ethernet switch midspan device can
  control an Ethnternet port and the Main Power supply unit's.

pethMainPseEntry row .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.3.1.1

A set of objects that display and control the Main power
of a PSE.

Indexes

pethMainPseGroupIndex

Column	Syntax	OID
pethMainPseGroupIndex This variable uniquely identifies the group to which power Ethernet PSE is connected.Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.3.1.1.1
pethMainPsePower The nominal power of the PSE expressed in Watts.	WattsUnsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.3.1.1.2
pethMainPseOperStatus The operational status of the main PSE.	Enumeration Enumerated Values: 1 on 2 off 3 faulty	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.3.1.1.3
pethMainPseConsumptionPower Measured usage power expressed in Watts.	WattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.3.1.1.4
pethMainPseUsageThreshold The usage threshold expressed in percents for comparing the measured power and initiating an alarm if the threshold is exceeded.	%Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.3.1.1.7

A table of objects that display and control the Notification
on a PSE  device.

pethNotificationControlEntry row .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.4.1.1

A set of objects that control the Notification events.

Indexes

pethNotificationControlGroupIndex

Column	Syntax	OID
pethNotificationControlGroupIndex This variable uniquely identifies the group. Group means box in the stack, module in a rack and it is RECOMENDED that the value 1 be used for non-modular devices	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.4.1.1.1
pethNotificationControlEnable Enable Notification from Agent	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.4.1.1.2