ALU-NGE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
110

aluNgeKeygroupTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupTable' 
Table to store the NGE keygroup entries.
aluNgeKeygroupEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1
Information about a single NGE keygroup entry.
Indexes
Column Syntax OID
aluNgeKeygroupId
The value of aluNgeKeygroupId specifies the id of a keygroup
entry and is the primary index for the table
aluNgeKeygroupTable.
AluNgeKeygroupId
Type Constraints:
range: 1..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable.
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.1
aluNgeKeygroupRowStatus
The aluNgeKeygroupRowStatus object is used to create and
delete rows in the aluNgeKeygroupTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.2
aluNgeKeygroupDescription
The value of aluNgeKeygroupDescription specifies the
user-provided description for each aluNgeKeygroupEntry in the
table aluNgeKeygroupTable.
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.3
aluNgeKeygroupAuthAlgorithm
The value of aluNgeKeygroupAuthAlgorithm specifies the Hashing
algorithm used for the AH (Authentication Header) protocol's
authentication function.
AluNgeAuthAlgorithmr/w
Type Values:
1sha256
2sha512
Description:
AluNgeAuthAlgorithm data type is an enumerated integer
that describes the values used to identify the
hashing algorithm.

Value Descriptions:

sha256 - Choosing this value configures the use of
…
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.4
aluNgeKeygroupEncrAlgorithm
The value of aluNgeKeygroupEncrAlgorithm specifies the
Encryption algorithm to be used. Encryption only applies
to ESP(Encapsulating Security Payload) configurations.
AluNgeEncrAlgorithmr/w
Type Values:
1aes128
2aes256
Description:
AluNgeEncrAlgorithm data type is an enumerated integer
that describes the values used to identify the encryption
algorithm.

Value Descriptions:

aes128 - Choosing this value configures the aes alg…
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.5
aluNgeKeygroupActiveOutboundSa
The value of aluNgeKeygroupEgressSpi specifies the SPI
to be used when performing encryption and authentication
on egressing packets using this keygroup.
AluNgeKeygroupSpiIdOrZeror/w
Type Constraints:
range: 0..1023
Description:
A number used to identify an entry in the aluNgeKeygroupSpiTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.6
aluNgeKeygroupOutboundSaActivateTime
The value of aluNgeKeygroupOutboundSaActivateTime indicates the sysUpTime
at the time the outbound security association is activated.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.7
aluNgeKeygroupName
The value of aluNgeKeygroupName specifies the name to associate
with this keygroup.
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..64
Description:
The long name of an item, or an empty string. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
chara…
 .1.3.6.1.4.1.6527.6.1.2.2.20.2.1.1.8

aluNgeKeygroupSpiTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupSpiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupSpiTable' 
Table to store the NGE keygroup SPI entries.
aluNgeKeygroupSpiEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.3.1.1
Information about a single NGE keygroup SPI entry.
Indexes
Column Syntax OID
aluNgeKeygroupSpiId
The value of aluNgeKeygroupSpiId specifies the id of a keygroup
SPI entry and is the primary index for the table
aluNgeKeygroupSpiTable.
AluNgeKeygroupSpiId
Type Constraints:
range: 1..1023
Description:
A number used to identify an entry in the aluNgeKeygroupSpiTable.
 .1.3.6.1.4.1.6527.6.1.2.2.20.3.1.1.1
aluNgeKeygroupSpiRowStatus
The aluNgeKeygroupSpiRowStatus object is used to create and
delete rows in the aluNgeKeygroupSpiTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.3.1.1.2
aluNgeKeygroupSpiAuthKey
The value of aluNgeKeygroupSpiAuthKey specifies the key used
for the authentication algorithm defined by the
aluNgeKeygroupAuthAlgorithm in the keygroup indexed
by aluNgeKeygroupId.

The length of the ke…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.6527.6.1.2.2.20.3.1.1.3
aluNgeKeygroupSpiEncrKey
The value of aluNgeKeygroupSpiEncrKey specifies the key used
for the encryption algorithm defined by the
aluNgeKeygroupEncrAlgorithm in the keygroup indexed
by aluNgeKeygroupId.

The length of the key mu…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6527.6.1.2.2.20.3.1.1.4
aluNgeKeygroupSpiInstallTime
The value of aluNgeKeygroupSpiInstallTime indicates the sysUpTime
at the time the security association is installed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.6.1.2.2.20.3.1.1.5
aluNgeKeygroupSpiKeyCRC
The value of aluNgeKeygroupSpiKeyCRC indicates the
result of CRC calculation base on the configured SPI keys.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.3.1.1.6

aluNgeKeygroupSdpBindingTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.4.1 · 1 row entry · 2 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupSdpBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupSdpBindingTable' 
Table to store the NGE keygroup sdp binding entries.
aluNgeKeygroupSdpBindingEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.4.1.1
Information about a single NGE keygroup sdp binding entry.
Indexes
No indexes recorded
Column Syntax OID
aluNgeKeygroupSdpBindingInbound
The value of aluNgeKeygroupSdpBindingInbound specifies the keygroup
id used for inbound traffic verification. Inbound traffic must contain
SPIs configured within this keygroup.
If the value of aluNgeKeygroupSdpBindingIn…
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.4.1.1.1
aluNgeKeygroupSdpBindingOutbound
The value of aluNgeKeygroupSdpBindingOutbound specifies the keygroup
id used for outbound traffic encryption. The value of
aluNgeKeygroupActiveOutboundSa within the specified keygroup must be
defined.
If the value of al…
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.4.1.1.2

aluNgeKeygroupVrfBindingTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.5.1 · 1 row entry · 2 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupVrfBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupVrfBindingTable' 
Table to store the NGE keygroup vrf binding entries.
aluNgeKeygroupVrfBindingEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.5.1.1
Information about a single NGE keygroup vrf binding entry.
Indexes
No indexes recorded
Column Syntax OID
aluNgeKeygroupVrfBindingInbound
The value of aluNgeKeygroupVrfBindingInbound specifies the keygroup
id used for inbound traffic verification. Inbound traffic must contain
SPIs configured within this keygroup.
If the value of aluNgeKeygroupVrfBindingIn…
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.5.1.1.1
aluNgeKeygroupVrfBindingOutbound
The value of aluNgeKeygroupVrfBindingOutbound specifies the keygroup
id used for outbound traffic encryption. The value of
aluNgeKeygroupActiveOutboundSa within the specified keygroup must be
defined.
If the value of al…
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.5.1.1.2

aluNgeMdaStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.6.1 · 1 row entry · 13 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeMdaStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeMdaStatsTable' 
Table to store group encryption MDA level statistics.
aluNgeMdaStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1
Statistics for a single group encryption MDA.
Indexes
Column Syntax OID
aluNgeMdaEncryptPkts
The value of aluNgeMdaEncryptPkts indicates the number
of packets successfully encrypted by the group
encryption data path.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.1
aluNgeMdaEncryptBytes
The value of aluNgeMdaEncryptBytes indicates the number
of bytes successfully encrypted by the group
encryption data path.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.2
aluNgeMdaDecryptPkts
The value of aluNgeMdaDecryptPkts indicates the number
of packets successfully decrypted by the group
encryption data path.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.3
aluNgeMdaDecryptBytes
The value of aluNgeMdaDecryptBytes indicates the number
of bytes successfully decrypted by the group
encryption data path.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.4
aluNgeMdaOutDropPkts
The value of aluNgeMdaOutDropPkts indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption data path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.5
aluNgeMdaOutDropUnsupportedUplink
The value of aluNgeMdaOutDropUnsupportedUplink indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption data path. This implies that
the resolved uplink does not…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.6
aluNgeMdaOutDropEnqueueError
The value of aluNgeMdaDropOutEnqueueError indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption data path. This implies that
there are enqueue errors in the …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.7
aluNgeMdaInDropPkts
The value of aluNgeMdaInDropPkts indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption data path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.8
aluNgeMdaInDropInvalidSpi
The value of aluNgeMdaInDropInvalidSpi indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption data path. This implies that
1) the received SPI does not exist wi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.9
aluNgeMdaInDropAuthFailure
The value of aluNgeMdaInDropAuthFailure indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption data path. This implies that
authentication failed on the receive…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.10
aluNgeMdaInDropPaddingFailure
The value of aluNgeMdaInDropPaddingFailure indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption data path. This implies that
there are padding errors detected…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.11
aluNgeMdaInDropEnqueueError
The value of aluNgeMdaInDropEnqueueError indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption data path. This implies that
there are enqueue errors in the en…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.12
aluNgeMdaInDropControlWordMismatch
The value of aluNgeMdaInDropControlWordMismatch indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption data path. This implies that
the decrypted control word d…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.1.1.13

aluNgeKeygroupStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.6.2 · 1 row entry · 16 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupStatsTable' 
Table to store group encryption keygroup level statistics.
aluNgeKeygroupStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1
Statistics for a single group encryption keygroup.
Indexes
Column Syntax OID
aluNgeKeygroupEncryptPkts
The value of aluNgeKeygroupEncryptPkts indicates the number
of packets successfully encrypted by the group
encryption keygroup.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.1
aluNgeKeygroupEncryptBytes
The value of aluNgeKeygroupEncryptBytes indicates the number
of bytes successfully encrypted by the group
encryption keygroup.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.2
aluNgeKeygroupDecryptPkts
The value of aluNgeKeygroupDecryptPkts indicates the number
of packets successfully decrypted by the group
encryption keygroup.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.3
aluNgeKeygroupDecryptBytes
The value of aluNgeKeygroupDecryptBytes indicates the number
of bytes successfully decrypted by the group
encryption keygroup.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.4
aluNgeKeygroupOutDropPkts
The value of aluNgeKeygroupOutDropPkts indicates the total number
of packets dropped before and during outbound (encryption)
processing by the group encryption keygroup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.5
aluNgeKeygroupOutDropUnsupportedUplink
The value of aluNgeKeygroupOutDropUnsupportedUplink indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption keygroup. This implies that
the resolved uplink does…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.6
aluNgeKeygroupOutDropEnqueueError
The value of aluNgeKeygroupOutDropEnqueueError indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption keygroup. This implies that
there are enqueue errors in t…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.7
aluNgeKeygroupOutDropOther
The value of aluNgeKeygroupOutDropOther indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption keygroup for unspecified
reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.8
aluNgeKeygroupInDropPkts
The value of aluNgeKeygroupInDropPkts indicates the total number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.9
aluNgeKeygroupInDropInvalidSpi
The value of aluNgeKeygroupInDropInvalidSpi indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup. This implies that
1) the received SPI does not exis…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.10
aluNgeKeygroupInDropAuthFailure
The value of aluNgeKeygroupInDropAuthFailure indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup. This implies that
authentication failed on the rec…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.11
aluNgeKeygroupInDropPaddingFailure
The value of aluNgeKeygroupInDropPaddingFailure indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup. This implies that
there are padding errors dete…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.12
aluNgeKeygroupInDropEnqueueError
The value of aluNgeKeygroupInDropEnqueueError indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup. This implies that
there are enqueue errors in the…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.13
aluNgeKeygroupInDropControlWordMismatch
The value of aluNgeKeygroupInDropControlWordMismatch indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup. This implies that
the decrypted control wo…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.14
aluNgeKeygroupInDropOther
The value of aluNgeKeygroupInDropOther indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup for unspecifed
reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.15
aluNgeKeygroupInLastDropSpi
The value of aluNgeKeygroupInLastDropSpi indicates the last
SPI value of the packet dropped before and during inbound (decryption)
processing by the group encryption keygroup.

If 0x00000000 is received, i…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.2.1.16

aluNgeKeygroupSpiStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.6.3 · 1 row entry · 13 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupSpiStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupSpiStatsTable' 
Table to store group encryption keygroup SPI level statistics.
aluNgeKeygroupSpiStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1
Statistics for a single encryption keygroup SPI.
Indexes
Column Syntax OID
aluNgeKeygroupSpiEncryptPkts
The value of aluNgeKeygroupSpiEncryptPkts indicates the number
of packets successfully encrypted by the group
encryption keygroup SPI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.1
aluNgeKeygroupSpiEncryptBytes
The value of aluNgeKeygroupSpiEncryptBytes indicates the number
of bytes successfully encrypted by the group
encryption keygroup SPI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.2
aluNgeKeygroupSpiDecryptPkts
The value of aluNgeKeygroupSpiDecryptPkts indicates the number
of packets successfully decrypted by the group
encryption keygroup SPI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.3
aluNgeKeygroupSpiDecryptBytes
The value of aluNgeKeygroupSpiDecryptBytes indicates the number
of bytes successfully decrypted by the group
encryption keygroup SPI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.4
aluNgeKeygroupSpiOutDropPkts
The value of aluNgeKeygroupSpiOutDropPkts indicates the total number
of packets dropped before and during outbound (encryption)
processing by the group encryption keygroup SPI.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.5
aluNgeKeygroupSpiOutDropEnqueueError
The value of aluNgeKeygroupSpiOutDropEnqueueError indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption keygroup SPI. This implies that
there are enqueue erro…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.6
aluNgeKeygroupSpiOutDropOther
The value of aluNgeKeygroupSpiOutDropOther indicates the number
of packets dropped before and during outbound (encryption)
processing by the group encryption keygroup SPI for unspecified
reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.7
aluNgeKeygroupSpiInDropPkts
The value of aluNgeKeygroupSpiInDropPkts indicates the total number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup SPI.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.8
aluNgeKeygroupSpiInDropAuthFailure
The value of aluNgeKeygroupSpiInDropAuthFailure indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup SPI. This implies that
authentication failed on …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.9
aluNgeKeygroupSpiInDropPaddingFailure
The value of aluNgeKeygroupSpiInDropPaddingFailure indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup SPI. This implies that
there are padding erro…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.10
aluNgeKeygroupSpiInDropEnqueueError
The value of aluNgeKeygroupSpiInDropEnqueueError indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup SPI. This implies that
there are enqueue errors…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.11
aluNgeKeygroupSpiInDropControlWordMismatch
The value of aluNgeKeygroupSpiInDropControlWordMismatch indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup SPI. This implies that
the decrypted con…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.12
aluNgeKeygroupSpiInDropOther
The value of aluNgeKeygroupSpiInDropOther indicates the number
of packets dropped before and during inbound (decryption)
processing by the group encryption keygroup SPI for unspecifed
reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.3.1.13

aluNgeKeygroupSdpBindStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.6.4 · 1 row entry · 7 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupSdpBindStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupSdpBindStatsTable' 
Table to store the NGE keygroup sdp binding statistics.
aluNgeKeygroupSdpBindStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1
Information about a single NGE keygroup sdp binding statistics.
Indexes
No indexes recorded
Column Syntax OID
aluNgeKeygroupSdpBindEncryptPkts
The value of aluNgeKeygroupSdpBindEncryptPkts indicates the number
of packets successfully encrypted by the sdp binding.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1.1
aluNgeKeygroupSdpBindEncryptBytes
The value of aluNgeKeygroupSdpBindEncryptBytes indicates the number
of bytes successfully encrypted by the sdp binding.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1.2
aluNgeKeygroupSdpBindDecryptPkts
The value of aluNgeKeygroupSdpBindDecryptPkts indicates the number
of packets successfully decrypted by the sdp binding.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1.3
aluNgeKeygroupSdpBindDecryptBytes
The value of aluNgeKeygroupSdpBindDecryptBytes indicates the number
of bytes successfully decrypted by the sdp binding.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1.4
aluNgeKeygroupSdpBindIngDropOtherPkts
The value of aluNgeKeygroupSdpBindIngDropOtherPkts indicates the number
of packets dropped before and during inbound (decryption)
processing by the sdp binding for unspecified reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1.5
aluNgeKeygroupSdpBindEgDropPkts
The value of aluNgeKeygroupSdpBindEgDropPkts indicates the number
of packets dropped before and during outbound (encryption)
processing by the sdp binding.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1.6
aluNgeKeygroupSdpBindIngDropInvalidSpi
The value of aluNgeKeygroupSdpBindIngDropInvalidSpi indicates the number
of packets dropped before and during inbound (decryption)
processing by the sdp binding. This implies that
1) the received SPI does not exist with…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.20.6.4.1.7

aluNgeKeygroupNameTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.7.1 · 1 row entry · 2 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupNameTable' 
A table that contains keygroup name information. Entries
are created automatically by the system
when aluNgeKeygroupName object is set for the keygroup.
aluNgeKeygroupNameEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.7.1.1
Basic information about a specific keygroup name.
Indexes
Column Syntax OID
aluNgeKeygroupNameId
The value of the object aluNgeKeygroupNameId specifies the keygroup
associated with this name.
AluNgeKeygroupId
Type Constraints:
range: 1..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable.
 .1.3.6.1.4.1.6527.6.1.2.2.20.7.1.1.1
aluNgeKeygroupNameRowStatus
This value of the object aluNgeKeygroupNameRowStatus specifies the
status of this row.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.7.1.1.2

aluNgeKeygroupRIBindingTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.9.1 · 1 row entry · 6 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupRIBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupRIBindingTable' 
Table to store the NGE keygroup router interface binding entries.
aluNgeKeygroupRIBindingEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.9.1.1
Information about a single NGE keygroup router interface binding entry.
Indexes
Column Syntax OID
aluNgeKeygroupRIBindingIfIndex
The unique value which identifies this interface, as stored in the vRtrIfTable.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6527.6.1.2.2.20.9.1.1.1
aluNgeKeygroupRIBindingRowStatus
The row status. The creation or deletion of a router interface entry
causes enabling or disabling of group encryption for the interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.9.1.1.2
aluNgeKeygroupRIBindingInbound
The value of aluNgeKeygroupRIBindingInbound specifies the keygroup
id used for inbound traffic verification. Inbound traffic must contain
SPIs configured within this keygroup.
If the value of aluNgeKeygroupRIBindingInbo…
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.9.1.1.3
aluNgeKeygroupRIBindingOutbound
The value of aluNgeKeygroupRIBindingOutbound specifies the keygroup
id used for outbound traffic encryption. The value of
aluNgeKeygroupActiveOutboundSa within the specified keygroup must be
defined.
If the value of alu…
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.9.1.1.4
aluNgeKeygroupRIBindInExceptId
The value of the object aluNgeKeygroupRIBindInExceptId specifies the
row index in the aluNgeIPExceptionTable corresponding to this
ingress exception, or zero if no exception is specified.
TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
Description:
The identification number of a filter. 0 indicates an invalid
filter-id.
 .1.3.6.1.4.1.6527.6.1.2.2.20.9.1.1.5
aluNgeKeygroupRIBindOutExceptId
The value of the object aluNgeKeygroupRIBindOutExceptId specifies the
row index in the aluNgeIPExceptionTable corresponding to this
egress exception, or zero if no exception is specified.
TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
Description:
The identification number of a filter. 0 indicates an invalid
filter-id.
 .1.3.6.1.4.1.6527.6.1.2.2.20.9.1.1.6

aluNgeKeygroupEthBindingTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.10.1 · 1 row entry · 3 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeKeygroupEthBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeKeygroupEthBindingTable' 
Table to store the NGE keygroup Ethernet port binding entries.
aluNgeKeygroupEthBindingEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.10.1.1
Information about a single NGE keygroup Ethernet port binding entry.
Indexes
Column Syntax OID
aluNgeKeygroupEthBindRowStatus
The row status. The creation or deletion of an Ethernet port entry
causes enabling or disabling of group encryption for the port.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.10.1.1.1
aluNgeKeygroupEthBindInbound
The value of aluNgeKeygroupEthBindInbound specifies the keygroup id
used for inbound traffic verification. Inbound traffic must contain
SPIs configured within this keygroup.
If the value of aluNgeKeygroupEthBindInbound …
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.10.1.1.2
aluNgeKeygroupEthBindOutbound
The value of aluNgeKeygroupEthBindOutbound specifies the keygroup id
used for outbound traffic encryption. The value of
aluNgeKeygroupActiveOutboundSa within the specified keygroup must be
defined.
If the value of aluNg…
AluNgeKeygroupIdOrZeror/w
Type Constraints:
range: 0..127
Description:
A number used to identify an entry in the aluNgeKeygroupTable or zero.
 .1.3.6.1.4.1.6527.6.1.2.2.20.10.1.1.3

aluNgeIPExceptionTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.11.1 · 1 row entry · 5 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeIPExceptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeIPExceptionTable' 
Contains a list of all IP exceptions configured on this system.
aluNgeIPExceptionEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.11.1.1
Information about a particular IP Exception entry. Entries are
create/deleted by the user. Entries have a presumed StorageType of
nonVolatile.
Indexes
Column Syntax OID
aluNgeIPExceptionId
Uniquely identifies an IP exception.
ALU-FILTER-MIBAluFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.1.1.1
aluNgeIPExceptionRowStatus
This object allows entries to be created and deleted in the
aluNgeIPExceptionTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.1.1.2
aluNgeIPExceptionScope
This object specifies the scope of this exception definition.
ALU-FILTER-MIBAluFilterScoper/w
Type Values:
1exclusive
2template
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.1.1.3
aluNgeIPExceptionDescription
The value of aluNgeIPExceptionDescription specifies the
user-provided description for each aluNgeIPExceptionEntry in the
table aluNgeIPExceptionTable.
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.1.1.4
aluNgeIPExceptionName
The value of aluNgeIPExceptionName specifies the name to associate
with this IP exception.
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..64
Description:
The long name of an item, or an empty string. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
chara…
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.1.1.5

aluNgeIPExceptionNameTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.11.3 · 1 row entry · 3 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeIPExceptionNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeIPExceptionNameTable' 
A table that contains IP exception name to Id mappings. Entries are
created automatically by the system when an aluIPExceptionName object
is set for an IP exception.
aluNgeIPExceptionNameEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.11.3.1
IP exception name to Id mapping.
Indexes
Column Syntax OID
aluNgeIPExceptionNameId
This object specifies the filter Id associated with the IP
exception name.
ALU-FILTER-MIBAluFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.3.1.1
aluNgeIPExceptionNameRowStatus
This object specifies the row status.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.3.1.2
aluNgeIPExceptionNameLastChanged
The value of this object indicates the sysUpTime at the time
of the last modification of this entry.

If no changes were made to the entry since the last
re-initialization of the local network management
s…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.3.1.3

aluNgeIPExceptionParamsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.20.11.4 · 1 row entry · 24 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluNgeIPExceptionParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-NGE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-NGE-MIB::aluNgeIPExceptionParamsTable' 
A table of all IP exception match entries for all IP exceptions.
aluNgeIPExceptionParamsEntry row .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1
A match entry for a particular IP exception.
Each match constitutes some criteria by which an unencrypted
IP packet will be accepted at the router interface to which
the IP exception is applied.
Indexes
Column Syntax OID
aluNgeIPExceptionParamsId
This is the index for the match entry. Each IP exception can have multiple
entries.
ALU-FILTER-MIBAluEntryId
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.1
aluNgeIPExceptionParamsRowStatus
This object allows entries to be created and deleted in the
aluNgeIPExceptionParamsTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.2
aluNgeIPExceptParamsDescription
The value of aluNgeIPExceptParamsDescription specifies the
user-provided description for each aluNgeIPExceptionParamsEntry in the
table aluNgeIPExceptionParamsTable.
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.3
aluNgeIPExceptParamsSourceIpAddr
IP address to match the source-ip of the packet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.4
aluNgeIPExceptParamsSourceIpMask
If not 0, the object aluNgeIPExceptParamsSourceIpMask
specifies the IP Mask value for this policy IP exception entry.
The mask is ANDed with the received source IP address to match
the aluNgeIPExceptParamsSourceIpAddr.
…
TIMETRA-TC-MIBIpAddressPrefixLengthr/w
Type Constraints:
range: 0..32
Description:
the number of bits to match in an IP address mask.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.5
aluNgeIPExceptParamsDestIpAddr
IP address to match the destination-ip of the packet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.6
aluNgeIPExceptParamsDestIpMask
If not 0, the object aluNgeIPExceptParamsDestIpMask
specifies the IP Mask value for this IP exception entry.
The mask is ANDed with the received destination IP address to match
the aluNgeIPExceptParamsDestIpAddr.
…
TIMETRA-TC-MIBIpAddressPrefixLengthr/w
Type Constraints:
range: 0..32
Description:
the number of bits to match in an IP address mask.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.7
aluNgeIPExceptParamsProtocol
IP protocol to match. set to -1 to disable matching IP protocol. If
the protocol is changed the protocol specific parameters are reset.
TIMETRA-TC-MIBTIpProtocolr/w
Type Constraints:
range: -2..255
Description:
IP protocol number. Well known protocol numbers include ICMP(1),
TCP(6), UDP(17).

-1 means value not set.
-2 indicates protocol wildcard for UDP and TCP.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.8
aluNgeIPExceptParamsSrcPortVal1
TCP/UDP port value1. The value of this object is used as per the
description for aluNgeIPExceptParamsSrcPortOpr.
TIMETRA-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
Description:
The number of a TCP or UDP port. Well known port numbers include
ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110),
nntp(119), snmp(161), snmptrap(162), etc.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.9
aluNgeIPExceptParamsSrcPortVal2
TCP/UDP port value2. The value of this object is used as per the
description for aluNgeIPExceptParamsSrcPortOpr.
TIMETRA-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
Description:
The number of a TCP or UDP port. Well known port numbers include
ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110),
nntp(119), snmp(161), snmptrap(162), etc.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.10
aluNgeIPExceptParamsSrcPortOpr
The operator specifies the manner in which
aluNgeIPExceptParamsSrcPortVal1 and aluNgeIPExceptParamsSrcPortVal2
are to be used. The value of these latter 2 objects and
aluNgeIPExceptParamsSrcPortOpr is used as described …
TIMETRA-TC-MIBTTcpUdpPortOperatorr/w
Based On: TOperator
Description:
The operator used for checking on TCP/UDP ports values and ranges
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.11
aluNgeIPExceptParamsDestPortVal1
TCP/UDP port value1. The value of this object is used as per the
description for aluNgeIPExceptParamsDestPortOperator.
TIMETRA-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
Description:
The number of a TCP or UDP port. Well known port numbers include
ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110),
nntp(119), snmp(161), snmptrap(162), etc.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.12
aluNgeIPExceptParamsDestPortVal2
TCP/UDP port value2. The value of this object is used as per the
description for aluNgeIPExceptParamsDestPortOperator.
TIMETRA-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
Description:
The number of a TCP or UDP port. Well known port numbers include
ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110),
nntp(119), snmp(161), snmptrap(162), etc.
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.13
aluNgeIPExceptParamsDestPortOpr
The operator specifies the manner in which
aluNgeIPExceptParamsDestPortVal1 and aluNgeIPExceptParamsDestPortVal2
are to be used. The value of these latter 2 objects and
aluNgeIPExceptParamsDestPortOpr is used as describ…
TIMETRA-TC-MIBTTcpUdpPortOperatorr/w
Based On: TOperator
Description:
The operator used for checking on TCP/UDP ports values and ranges
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.14
aluNgeIPExceptParamsIcmpCode
Icmp code to be matched. aluNgeIPExceptParamsIcmpCode complements the
object aluNgeIPExceptParamsIcmpType. Both of them need to be set to actually
enable ICMP matching. The value -1 means Icmp code matching is not
enabl…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.15
aluNgeIPExceptParamsIcmpType
Icmp type to be matched. aluNgeIPExceptParamsIcmpType complements the
object aluNgeIPExceptParamsIcmpCode. Both of them need to be set to actually
enable ICMP matching. The value -1 means Icmp type matching is not
enabl…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.16
aluNgeIPExceptParmSrcIpFullMask
If not 0, the object aluNgeIPExceptParmSrcIpFullMask
specifies the IP Mask value for this policy IP exception entry.
The mask is ANDed with the received Source IP address to match
the aluNgeIPExceptParamsSourceIpAddr.
…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.17
aluNgeIPExceptParmDestIpFullMask
If not 0, the object aluNgeIPExceptParamsDestIpFullMask
specifies the IP Mask value for this policy IP exception entry.
The mask is ANDed with the received Destination IP address to match
the aluNgeIPExceptParmDestIpAdd…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.18
aluNgeIPExceptIngressHitCount
This object indicates the number of times an ingress packet
matched this entry.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.19
aluNgeIPExceptEgressHitCount
This object indicates the number of times an egress packet
matched this entry.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.20
aluNgeIPExceptIngrHitByteCount
This object indicates the number of bytes of all
ingress packets that matched this entry.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.21
aluNgeIPExceptEgressHitByteCount
This object indicates the number of bytes of all
egress packets that matched this entry.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.22
aluNgeIPExceptSrcIpPrefixList
The value of this object specifies the ip-prefix-list used as match
criterion for the source ip address.

The value specified for this object must correspond to a prefix-list
defined in tFilterPrefixListTa…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..32
Description:
The name of an item, or an empty string. When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters,…
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.23
aluNgeIPExceptDestIpPrefixList
The value of this object specifies the ip-prefix-list used as match
criterion for the source ip address.

The value specified for this object must correspond to a prefix-list
defined in tFilterPrefixListTa…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..32
Description:
The name of an item, or an empty string. When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters,…
 .1.3.6.1.4.1.6527.6.1.2.2.20.11.4.1.24