ALU-MICROWAVE-MIB Table View

The aluMwLinkTable has an entry for each Packet Microwave Link in the system.

aluMwLinkEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1

Each row entry represents a Packet Microwave Link that is provisioned on the system.

Entries can be created and deleted on the system via SNMP SET operations
operations using the aluMwLinkRowStatus objec…

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwLinkID

Column	Syntax	OID
aluMwLinkID aluMwLinkID identifies this Packet Microwave Link. The value of this object is calculated using the TiMOS encoding scheme described in AluMwLinkID.	AluMwLinkID	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.1
aluMwLinkRowStatus aluMwLinkRowStatus controls the creation and deletion of row entries in the aluMwLinkTable. The manager has to first calculate the aluMwLinkID based on the TiMOS encoding.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.2
aluMwLinkOperFlags This object specifies all the conditions that affect the operating status of this Packet Microwave Link.	Bits Enumerated Values: 0 noRadioCfg 1 linkAdminDown 2 noRadiosPresent 3 noRadiosReady 4 incompatibleConfig 5 radioFailure 6 receptionFailure 7 di 8 txMuted	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.3
aluMwLinkRadioScheme aluMwLinkRadioScheme specifies the scheme all the radios contained in this link are operating in.	Enumerationr/w Enumerated Values: 0 unknown 1 onePlusZero 2 onePlusOneHSB	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.4
aluMwLinkAlarmState aluMwLinkAlarmState summarizes the alarm state of the link. A value of 'notSupported' indicates the link does not support alarm management.	Enumeration Enumerated Values: 0 ok 1 critical 2 major 3 minor 4 warning 5 inderminate 6 notSupported 7 unknown	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.5
aluMwLinkAlarmsCritical aluMwLinkAlarmsCritical indicates the number of critical alarms that are raised on this microwave link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.6
aluMwLinkAlarmsMajor aluMwLinkAlarmsMajor indicates the number of major alarms that are raised on this microwave link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.7
aluMwLinkAlarmsMinor aluMwLinkAlarmsMinor indicates the number of minor alarms that are raised on this microwave link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.8
aluMwLinkAlarmsWarning aluMwLinkAlarmsWarning indicates the number of warning alarms that are raised on this microwave link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.9
aluMwLinkAlarmsInd aluMwLinkAlarmsInd indicates the number of indeterminate alarms that are raised on this microwave link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.10
aluMwLinkAlarmsCommunication aluMwLinkAlarmsCommunication indicates the number of alarms related to radio communications that are raised on this microwave link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.11
aluMwLinkAlarmsEquipment aluMwLinkAlarmsEquipment indicates the number of alarms related to equipment that are raised on this microwave link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.12
aluMwLinkEPSActivity aluMwLinkEPSActivity indicates the current activity of the equipment protection scheme	AluMwLinkRadioActivity Type Values: 1 notApplicable 2 mainRadio 3 spareRadio 4 bothActive	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.13
aluMwLinkTPSActivity aluMwLinkTPSActivity indicates the current activity of the transport protection scheme	AluMwLinkRadioActivity Type Values: 1 notApplicable 2 mainRadio 3 spareRadio 4 bothActive	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.14
aluMwLinkRPSActivity aluMwLinkRPSActivity indicates the current activity of the radio protection scheme	AluMwLinkRadioActivity Type Values: 1 notApplicable 2 mainRadio 3 spareRadio 4 bothActive	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.15
aluMwLinkEPSRevertiveness aluMwLinkEPSRevertiveness configures the revertiveness of the equipment protection scheme	AluMwLinkRevertivenessr/w Type Values: 1 notApplicable 2 revertive 3 nonRevertive	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.16
aluMwLinkTPSRevertiveness aluMwLinkTPSRevertiveness indicates the revertiveness of the transport protection scheme. This is inherited from the aluMwLinkEPSRevertiveness	AluMwLinkRevertiveness Type Values: 1 notApplicable 2 revertive 3 nonRevertive	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.17
aluMwLinkRPSRevertiveness aluMwLinkRPSRevertiveness configures the revertiveness of the radio protection scheme	AluMwLinkRevertivenessr/w Type Values: 1 notApplicable 2 revertive 3 nonRevertive	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.18
aluMwLinkEPSMainMaintOp aluMwLinkEPSMainMaintOp applies maintenance operations to the main radio in the equipment protection scheme	AluMwLinkMaintenanceOpr/w Type Values: 0 none 1 lockout 2 forced 3 manual	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.19
aluMwLinkEPSSpareMaintOp aluMwLinkEPSSpareMaintOp applies maintenance operations to the spare radio in the equipment protection scheme	AluMwLinkMaintenanceOpr/w Type Values: 0 none 1 lockout 2 forced 3 manual	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.20
aluMwLinkTPSMainMaintOp aluMwLinkTPSMainMaintOp applies maintenance operations to the main radio in the transport protection scheme	AluMwLinkMaintenanceOpr/w Type Values: 0 none 1 lockout 2 forced 3 manual	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.21
aluMwLinkTPSSpareMaintOp aluMwLinkTPSSpareMaintOp applies maintenance operations to the spare radio in the transport protection scheme	AluMwLinkMaintenanceOpr/w Type Values: 0 none 1 lockout 2 forced 3 manual	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.22
aluMwLinkRPSMainMaintOp aluMwLinkRPSMainMaintOp applies maintenance operations to the main radio in the radio protection scheme	AluMwLinkMaintenanceOpr/w Type Values: 0 none 1 lockout 2 forced 3 manual	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.23
aluMwLinkRPSSpareMaintOp aluMwLinkRPSSpareMaintOp applies maintenance operations to the spare radio in the radio protection scheme	AluMwLinkMaintenanceOpr/w Type Values: 0 none 1 lockout 2 forced 3 manual	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.24
aluMwLinkPeerID aluMwLinkPeerID identifies the peer Microwave Link. The value of this object is calculated using the TiMOS encoding scheme described in AluMwLinkID when connected to 7705 SAR systems and based on peer encoding scheme f…	AluMwLinkID	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.25
aluMwLinkPeerNEIpAddress aluMwLinkPeerNEIpAddress identifies the peer NE IPv4 address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.26
aluMwLinkClearStatistics aluMwLinkClearStatistics clears all link level statistics.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.27
aluMwLinkPeerDiscovery aluMwLinkPeerDiscovery enables and disables discovery of peer information on managed microwave links. The value of aluMwLinkPeerDiscovery is not used for standalone microwave links.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.1.1.28

The aluMwRadioTable has an entry for each Microwave Radio in the system.

aluMwRadioEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1

Each row entry represents a Microwave Radio that is connected off a physical port
on the system. The aluMwRadioPortID contains this port encoded in it.

Entries can be created and deleted on micro…

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwRadioPortID

Column	Syntax	OID
aluMwRadioPortID aluMwRadioPortID identifies the port of this microwave radio. The value of this object is calculated using the TiMOS encoding scheme described in TmnxPortID.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.1
aluMwRadioRowStatus aluMwRadioRowStatus controls the creation and deletion of row entries in the aluMwRadioTable. The manager has to first calculate the aluMwRadioPortID based on the TiMOS encoding. Setting …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.2
aluMwRadioMode aluMwRadioMode specifies the role this microwave radio is operating with respect to the 'mw-link' that it is part of. This radio will be a 'main (1)' or 'spare (2)' radio in an mw-link. This object can…	Enumerationr/w Enumerated Values: 0 unknown 1 onePlusZero 2 main 3 spare	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.3
aluMwRadioMwLinkID aluMwRadioMwLinkID indicates the AluMwLinkID of the mw-link that this radio is part of. This object must be set during conjunction with aluMwRadioRowStatus during mw-link creation.	AluMwLinkIDr/w	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.4
aluMwRadioOperStatus The current operational status of this microwave radio.	TIMETRA-PORT-MIBTmnxPortOperStatus Type Values: 1 unknown 2 inService 3 outOfService 4 diagnosing 5 failed	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.5
aluMwRadioOperFlags This object specifies all the conditions that affect the operating status of this radio. Only 'portOperDown' is applicable to radios operating as standalone devices as indicated by aluMwRadioStandalone.	Bits Enumerated Values: 0 portNotPresent 1 portOperDown 2 radioNotPresent 3 radioCommError 4 radioInit 5 softwareDownload 6 txMuted 7 radioNotReady 8 radioEqFailure 9 incompatibleShifter 10 incompatibleFreq 11 incompatiblePower 12 incompatibleModParms 13 di 14 radioLinkDown 15 rslThresholdFail 16 lof 17 protectionFail 18 proxyActive 19 noDbFile 20 dbSyncInProgress 21 noDbConfig 22 tpsTxMuted 23 noSoftware 24 softwareMismatch 25 issu 26 highBer	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.6
aluMwRadioStandalone This object specifies whether the radio is operating as a standalone network element or if it is managed by this router. A value of 'true' indicates it is operating as a standalone device.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.7
aluMwRadioName The textual name of the radio.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.8
aluMwRadioDatabaseFilename aluMwRadioDatabaseFilename specifies the filename of the radio's database. This file must be located at the same path as the system configuration file.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.9
aluMwRadioType aluMwRadioType specifies the device type of microwave radio. The type of radio is only available when the microwave radio is managed and is present. aluMwRadioType returns a value of '0' when the radio ty…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.10
aluMwRadioFrequency aluMwRadioType specifies the frequency of the microwave radio. The frequency of the radio is only available when the microwave radio is managed and is present.	MHzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.11
aluMwRadioAlarmState aluMwRadioAlarmState summarizes the alarm state of the radio.	Enumeration Enumerated Values: 0 ok 1 critical 2 major 3 minor 4 warning 5 inderminate 6 notSupported 7 unknown	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.12
aluMwRadioAlarmsCritical aluMwRadioAlarmsCritical indicates the number of critical alarms that are raised on this microwave radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.13
aluMwRadioAlarmsMajor aluMwRadioAlarmsMajor indicates the number of major alarms that are raised on this microwave radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.14
aluMwRadioAlarmsMinor aluMwRadioAlarmsMinor indicates the number of minor alarms that are raised on this microwave radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.15
aluMwRadioAlarmsWarning aluMwRadioAlarmsWarning indicates the number of warning alarms that are raised on this microwave radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.16
aluMwRadioAlarmsInd aluMwRadioAlarmsInd indicates the number of indeterminate alarms that are raised on this microwave radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.17
aluMwRadioAlarmsCommunication aluMwRadioAlarmsCommunication indicates the number of alarms related to radio communications that are raised on this microwave radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.18
aluMwRadioAlarmsEquipment aluMwRadioAlarmsEquipment indicates the number of alarms related to equipment that are raised on this microwave radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.19
aluMwRadioTxMuted aluMwRadioTxMuted indicates the current state of the transmitter.	Enumerationr/w Enumerated Values: 0 unknown 1 none 2 manual 3 auto	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.20
aluMwRadioReboot aluMwRadioReboot performs a reset of the radio device.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.21
aluMwRadioLastStateChange The aluMwRadioLastStateChange variable contains the value of the sysUpTime the last time the operational status of the radio link changed state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.22
aluMwRadioCommEstablished The aluMwRadioCommEstablished variable contains the value of the sysUpTime the last time the radio managment communications was established.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.23
aluMwRadioCommLost The aluMwRadioCommLost variable contains the value of the sysUpTime the last time the radio managment communications was lost.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.24
aluMwRadioSwState aluMwRadioSwState indicates the state of software on the MPT.	AluMwRadioSwState Type Values: 0 unknown 1 dwnldRequested 2 dwnldForced 3 inProgress 4 ready 5 ok 6 mismatch 7 dwnldFailed	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.25
aluMwRadioSwDnldProgress aluMwRadioSwDnldProgress indicates the progress percentage of an in-progress software download to the MPT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.26
aluMwRadioRslHistoryUrl aluMwRadioRslHistoryUrl specifies the URL of the radio's RSL history. This file must be located on the local compact flash.	TIMETRA-TC-MIBTmnxDisplayStringURLr/w Type Constraints: range: 0..180	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.27
aluMwRadioRslHistoryClear aluMwRadioRslHistoryClear performs a clear of the MPT RSL history.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.28
aluMwRadioFfdSuppressFlags This object specifies the MPT radio fault conditions which can be suppressed.	Bitsr/w Enumerated Values: 0 allfaults 1 highBer 2 di 3 rslThreshold	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.29
aluMwRadioPMG826Enable This object enables normalized G.826 performance monitoring statistics to be collected.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.30
aluMwRadioPMG826OperStatus The current operational status of normalized G.826 performance monitoring statistics.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.31
aluMwRadioPMG826Clear Clears the recorded current and historical normalized G.826 statistics.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.32
aluMwRadioPMACMEnable This object enables Adaptive Coding and Modulation performance monitoring statistics to be collected.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.33
aluMwRadioPMACMOperStatus The current operational status of Adaptive Coding and Modulation performance monitoring statistics.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.34
aluMwRadioPMACMClear Clears the recorded current and historical Adaptive Coding and Modulation statistics.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.35
aluMwRadioPMPowerEnable This object enables RX and TX power performance monitoring statistics to be collected.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.36
aluMwRadioPMPowerOperStatus The current operational status of RX and TX power performance monitoring statistics.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.37
aluMwRadioPMPowerClear Clears the recorded current and historical RX and TX power statistics.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.6.1.2.2.7.1.2.1.38

This table contains the radio analogue measurements.

aluMwRadioPowerMeasuresEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.3.1

An entry of the analogue measurements table. Each entry corresponds to a Radio
Synchronous or Plesiochronous Physical Interface (RSPI or RPPI).

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwRadioPortID

Column	Syntax	OID
aluMwRadioLocalTxPower This object represents the local transmitted power level. It is an integer with associated measure unit expressed in decade of dBm.	Integer32 Constraints: range: -1000-1000	.1.3.6.1.4.1.6527.6.1.2.2.7.1.3.1.1
aluMwRadioLocalRxMainPower This object represents the local received power level. In case of space diversity configuration with combiner function in base band it is used to represent the power at the input of the local main receiver. It is a n…	Integer32 Constraints: range: -1000-0	.1.3.6.1.4.1.6527.6.1.2.2.7.1.3.1.2
aluMwRadioRemoteTxPower This object represents the remote transmitted power level. It is an integer with associated measure unit expressed in decade of dBm.	Integer32 Constraints: range: -1000-1000	.1.3.6.1.4.1.6527.6.1.2.2.7.1.3.1.3
aluMwRadioRemoteRxMainPower This object represents the remote received power level. In case of space diversity configuration with combiner function in base band it is used to represent the power at the input of the remote main receiver. It is a …	Integer32 Constraints: range: -1000-0	.1.3.6.1.4.1.6527.6.1.2.2.7.1.3.1.4
aluMwRadioLocalDiversityPower This object represents the local RSL power for SD (combiner) module input. It is an integer with associated measure unit expressed in decade of dBm.	Integer32 Constraints: range: -1000-1000	.1.3.6.1.4.1.6527.6.1.2.2.7.1.3.1.5
aluMwRadioRemoteDiversityPower This object represents the remote RSL power for SD (combiner) module input. It is a negative integer with associated measure unit expressed in decade of dBm.	Integer32 Constraints: range: -1000-0	.1.3.6.1.4.1.6527.6.1.2.2.7.1.3.1.6

This table contains the radio alarm conditions.

aluMwRadioAlarmsEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1

An entry of the alarms table. Each entry corresponds to a Radio
alarm conditions that is currently raised or cleared.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwRadioPortID aluMwRadioAlarmID

Column	Syntax	OID
aluMwRadioAlarmID Used by Microwave notifications, the OID indicates the identifier of an alarm condition on the radio device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.1
aluMwRadioAlarmTime Used by Microwave notifications, the OID indicates the time at which the event occured on the radio device.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.2
aluMwRadioAlarmName This object contains the alarm name of the condition.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.3
aluMwRadioAlarmSeverity Used by Microwave notifications, the OID indicates the severity of an alarm condition on the radio device.	Enumeration Enumerated Values: 1 critical 2 major 3 minor 4 warning 5 indeterminate 6 cleared	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.4
aluMwRadioAlarmSpecProblem This object contains the alarm specific problem description. Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem desc…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.5
aluMwRadioAlarmType Used by Microwave notifications, the OID indicates the type of alarm condition on the radio device.	Enumeration Enumerated Values: 1 communication 2 qos 3 processing 4 equipment 5 environment	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.6
aluMwRadioAlarmObject Used by Microwave notifications, the OID indicates the object on the radio device that has the alarm condition.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.7
aluMwRadioAlarmSubObject Used by Microwave notifications, the OID indicates the sub-object on the radio device that has the alarm condition.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.6.1.2.2.7.1.4.1.8

The aluMwLinkStatisticsTable has an entry for each Packet Microwave Link in the system.

aluMwLinkStatisticsEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1

Each row entry represents a Packet Microwave Link that is provisioned on the system.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwLinkID

Column	Syntax	OID
aluMwLinkAggrFramesTx aluMwLinkAggrFramesTx specifies the number of ethernet frames to be transmitted over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.1
aluMwLinkAggrOctetsTx aluMwLinkAggrOctetsTx specifies the number of octets to be transmitted over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.2
aluMwLinkAggrDiscardedTx aluMwLinkAggrDiscardedTx specifies the number of frames discarded on the radio before transmission.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.3
aluMwLinkQueue1FramesTx aluMwLinkQueue1FramesTx specifies the number of ethernet frames to be transmitted from queue 1 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.4
aluMwLinkQueue1OctetsTx aluMwLinkQueue1OctetsTx specifies the number of octets to be transmitted from queue 1 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.5
aluMwLinkQueue1DiscardedTx aluMwLinkQueue1DiscardedTx specifies the number of frames discarded on the radio from queue 1 before transmission.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.6
aluMwLinkQueue2FramesTx aluMwLinkQueue2FramesTx specifies the number of ethernet frames to be transmitted from queue 2 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.7
aluMwLinkQueue2OctetsTx aluMwLinkQueue2OctetsTx specifies the number of octets transmitted to be from queue 2 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.8
aluMwLinkQueue2DiscardedTx aluMwLinkQueue2DiscardedTx specifies the number of frames discarded on the radio from queue 2 before transmission.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.9
aluMwLinkQueue3FramesTx aluMwLinkQueue3FramesTx specifies the number of ethernet frames to be transmitted from queue 3 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.10
aluMwLinkQueue3OctetsTx aluMwLinkQueue3OctetsTx specifies the number of octets to be transmitted from queue 3 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.11
aluMwLinkQueue3DiscardedTx aluMwLinkQueue3DiscardedTx specifies the number of frames discarded on the radio from queue 3 before transmission.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.12
aluMwLinkQueue4FramesTx aluMwLinkQueue4FramesTx specifies the number of ethernet frames to be transmitted from queue 4 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.13
aluMwLinkQueue4OctetsTx aluMwLinkQueue4OctetsTx specifies the number of octets to be transmitted from queue 4 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.14
aluMwLinkQueue4DiscardedTx aluMwLinkQueue4DiscardedTx specifies the number of frames discarded on the radio from queue 4 before transmission.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.15
aluMwLinkQueue5FramesTx aluMwLinkQueue5FramesTx specifies the number of ethernet frames to be transmitted from queue 5 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.16
aluMwLinkQueue5OctetsTx aluMwLinkQueue5OctetsTx specifies the number of octets to be transmitted from queue 5 over radio link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.17
aluMwLinkQueue5DiscardedTx aluMwLinkQueue5DiscardedTx specifies the number of frames discarded on the radio from queue 5 before transmission.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.1.2.2.7.1.5.1.18

The aluMwRadioInfoTable has an entry for each Microwave Radio in the system.

aluMwRadioInfoEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1

Each row entry represents a Microwave Radio that is connected off a physical port
on the system. The aluMwRadioPortID contains this port encoded in it.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwRadioPortID

Column	Syntax	OID
aluMwRadioInfoValid aluMwRadioInfoValid indicates whether the info of the MPT is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.1
aluMwRadioCompanyId The inventory company identifier for the microwave radio.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.2
aluMwRadioMnemonic The mnemonic inventory value for the microwave radio.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.3
aluMwRadioCLEI The inventory CLEI value for the microwave radio.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.4
aluMwRadioHwPartNumber The inventory Hardware Part + ICS value for the microwave radio.	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.5
aluMwRadioSwPartNumber The inventory Software Part number for the microwave radio.	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.6
aluMwRadioFactoryId The inventory factory identifier for the microwave radio.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.7
aluMwRadioSerialNumber The unique inventory serial number for the microwave radio.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.8
aluMwRadioMfgDateId The inventory manufacturing date identifier for the microwave radio.	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.9
aluMwRadioMfgDate The inventory manufacturing date for the microwave radio.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.10
aluMwRadioCustomerField The inventory customer field for the microwave radio.	OctetString Constraints: range: 0-46	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.11
aluMwRadioTemperature aluMwRadioTemperature indicates the temperature of the MPT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.6.1.12

The aluMwTable has system information for microwave.

aluMwEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.7.1

Each row entry represents a Microwave System.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex

Column	Syntax	OID
aluMwSwPackageValid aluMwSwPackageValid indicates whether SAR has detected a valid Software package for managed radios.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.7.1.1
aluMwSwDownloadTool aluMwSwDownloadTool is used to initiate a software download of radio software to all managed radios.	Enumerationr/w Enumerated Values: 0 notApplicable 1 startDownload 2 startForcedDownload	.1.3.6.1.4.1.6527.6.1.2.2.7.1.7.1.2
aluMwSwDownloadState aluMwSwDownloadState is used to indicate the state of the of radio software to all managed radios. noSoftwarePackage - No Valid Software Package Found ready - Software is Ready downloadI…	Enumeration Enumerated Values: 0 notApplicable 1 noSoftwarePackage 2 ready 3 downloadInProgress 5 downloadFailed	.1.3.6.1.4.1.6527.6.1.2.2.7.1.7.1.3

This table contains the MW link Transmit Diversity Antenna status.

aluMwLinkTdaStatusEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.8.1

An entry of the Transmit Diversity Antenna status table.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwLinkID

Column	Syntax	OID
aluMwLinkTdaCmdState aluMwLinkTdaCmdState is used to get the TDA command state.	Enumeration Enumerated Values: 0 disabled 1 enabled 2 error	.1.3.6.1.4.1.6527.6.1.2.2.7.1.8.1.1
aluMwLinkTdaManualCmdStatus aluMwLinkTdaManualCmdStatus is used to get the TDA manual command status.	Enumeration Enumerated Values: 0 notForced 1 main 2 diversity 3 error	.1.3.6.1.4.1.6527.6.1.2.2.7.1.8.1.2
aluMwLinkTdaSwitchPosition aluMwLinkTdaSwitchPosition is used to get the TDA switch position.	Enumeration Enumerated Values: 0 main 1 diversity 2 error	.1.3.6.1.4.1.6527.6.1.2.2.7.1.8.1.3

This table contains the current and historic normalized G.826
performance monitoring statistics for the given radio.

aluMwRadioPMG826Entry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1

An entry of the microwave radio G.826 performance monitoring table.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwRadioPortID aluMwPMG826Section aluMwPMG826Period aluMwPMG826Bin

Column	Syntax	OID
aluMwPMG826Section Index to select the radio link or radio hop.	AluMwPerfMonSection Type Values: 0 radioHop 1 radioLink	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.1
aluMwPMG826Period Index to select the 15 minute or 24 hour counters.	AluMwPerfMonPeriod Type Values: 0 fifteenMinute 1 twentyFourHour	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.2
aluMwPMG826Bin Index to select the current (0) or historic counters.	AluMwPerfMonBin Type Constraints: range: 0..96	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.3
aluMwPMG826Date The number of seconds since midnight, January 1st 1970 to the start of this counting period (even 15 minutes or beginning of day, depending on selected period).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.4
aluMwPMG826Duration The number of seconds recorded in this period.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.5
aluMwPMG826EPSState The EPS state at the time of recording this period.	AluMwPerfMonEPSState Type Values: 0 notActive 1 active 2 notRelevant	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.6
aluMwPMG826Suspect If the stats are incomplete for this period, they will be considered suspect.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.7
aluMwPMG826ES The number of errored seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.8
aluMwPMG826SES The number severely errored seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.9
aluMwPMG826BBE The number of background block errors.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.10
aluMwPMG826UAS The number of unavailable seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.9.1.11

This table contains the current and historic adaptive coding
and modulation performance monitoring statistics for the given
radio.

aluMwRadioPMACMEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1

An entry of the microwave ACM performance monitoring table.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwRadioPortID aluMwPMACMPeriod aluMwPMACMBin aluMwPMACMModulation

Column	Syntax	OID
aluMwPMACMPeriod Index to select the 15 minute or 24 hour counters.	AluMwPerfMonPeriod Type Values: 0 fifteenMinute 1 twentyFourHour	.1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1.1
aluMwPMACMBin Index to select the current (0) or historic counters.	AluMwPerfMonBin Type Constraints: range: 0..96	.1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1.2
aluMwPMACMModulation Index to select the modulation ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1.3
aluMwPMACMDate The number of seconds since midnight, January 1st 1970 to the start of this counting period (even 15 minutes or beginning of day, depending on selected period).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1.4
aluMwPMACMDuration The number of seconds recorded in this period.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1.5
aluMwPMACMSuspect If the stats are incomplete for this period, they will be considered suspect.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1.6
aluMwPMACMTimeSpent The number of milliseconds spent at this modulation.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.10.1.7

This table contains the current and historic RX and TX power
performance monitoring statistics for the given radio.

aluMwRadioPMPowerEntry row .1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1

An entry of the microwave Power performance monitoring table.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex aluMwRadioPortID aluMwPMPowerDirection aluMwPMPowerSection aluMwPMPowerPeriod aluMwPMPowerBin

Column	Syntax	OID
aluMwPMPowerDirection Index to select the received or transmitted power levels.	Enumeration Enumerated Values: 0 rx 1 tx	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.1
aluMwPMPowerSection Index to select the radio link or radio hop. Radio link is not applicable when the direction is tx.	AluMwPerfMonSection Type Values: 0 radioHop 1 radioLink	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.2
aluMwPMPowerPeriod Index to select the 15 minute or 24 hour counters.	AluMwPerfMonPeriod Type Values: 0 fifteenMinute 1 twentyFourHour	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.3
aluMwPMPowerBin Index to select the current (0) or historic counters.	AluMwPerfMonBin Type Constraints: range: 0..96	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.4
aluMwPMPowerDate The number of seconds since midnight, January 1st 1970 to the start of this counting period (even 15 minutes or beginning of day, depending on selected period).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.5
aluMwPMPowerDuration The number of seconds recorded in this period.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.6
aluMwPMPowerEPSState The EPS state at the time of recording this period. If the direction is tx, EPS state is always notRelevant.	AluMwPerfMonEPSState Type Values: 0 notActive 1 active 2 notRelevant	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.7
aluMwPMPowerSuspect If the stats are incomplete for this period, they will be considered suspect.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.8
aluMwPMPowerMinPowerLevel The minimum power level.	Integer32 Constraints: range: -1000-1000	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.9
aluMwPMPowerMaxPowerLevel The maximum power level.	Integer32 Constraints: range: -1000-1000	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.10
aluMwPMPowerMeanPowerLevel The average power level.	Integer32 Constraints: range: -1000-1000	.1.3.6.1.4.1.6527.6.1.2.2.7.1.11.1.11