ALU-LCR-MIB Table View

This table lists the LCR groups that have been configured
on the system.

aluLcrConfigEntry row .1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1

A conceptual row in the aluLcrConfigTable.

Indexes

aluLcrConfigName

Column	Syntax	OID
aluLcrConfigName A textual name for the LCR group.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.1
aluLcrConfigRowStatus The status of this LCR group entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.2
aluLcrConfigDescription A textual string containing user supplied information about the LCR group.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.3
aluLcrConfigRevert The revertive mode of the LCR group. nonRevertive Traffic remains on the protection MDA until another switch request is received. revertive When the condition …	Enumerationr/w Enumerated Values: 1 nonRevertive 2 revertive	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.4
aluLcrConfigWaitToRestore The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore period must elapse before reverting. This is intended to avoid rapid switch …	secondsUnsigned32r/w Constraints: range: 0-0 range: 60-3600	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.5
aluLcrConfigMcNeighborAddrType The value of object aluLcrConfigMcNeighborAddrType specifies the address type of the neighbor's ip-address as specified by aluLcrConfigMcNeighborAddr in the case of Multi-Chassis LCR architecture.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.6
aluLcrConfigMcNeighborAddr The value of aluLcrConfigMcNeighborAddr variable specifies the neighbor's ip-address only on a Multi-Chassis LCR where the working and protect MDAs are configured on different routers. The value of aluLcrConfigMcNeighbo…	OctetStringr/w Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.7
aluLcrConfigMcAdvertiseInterval The value of aluLcrConfigMcAdvertiseInterval specifies the time interval, in 100s of milliseconds, between 'I am operational' messages sent by both protect and working MDAs to their neighbor for Multi-Chassis LCR. The v…	100s of millisecondsUnsigned32r/w Constraints: range: 10-650	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.8
aluLcrConfigMcHoldTime The value of aluLcrConfigMcHoldTime specifies how much time can pass, in 100s of milliseconds, without receiving an advertise packet from the neighbor before the Multi-Chassis signaling link is considered not operationa…	100s of millisecondsUnsigned32r/w Constraints: range: 10-650	.1.3.6.1.4.1.6527.6.1.2.2.23.2.1.1.9

This table lists the LCR MDA members that have been configured
in LCR groups.

aluLcrMdaConfigEntry row .1.3.6.1.4.1.6527.6.1.2.2.23.2.2.1

A conceptual row in the aluLcrMdaConfigTable.

Indexes

aluLcrConfigName aluLcrMdaConfigNumber

Column	Syntax	OID
aluLcrMdaConfigNumber This field is set to a unique member number within an LCR group. The value 0 indicates the null (or protection) member. The value 1 indicates the working member.	Unsigned32 Constraints: range: 0-1	.1.3.6.1.4.1.6527.6.1.2.2.23.2.2.1.1
aluLcrMdaConfigRowStatus The status of this LCR MDA member entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.1.2.2.23.2.2.1.2
aluLcrMdaConfigHwIndex The Hardware Index assigned to an MDA. This is a hardware component with tmnxHwClass mdaModule(11). The value of this object must be unique among all instances of aluLcrMdaConfigHwIndex. In other words, a particular har…	TIMETRA-CHASSIS-MIBTmnxHwIndexr/w Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.23.2.2.1.3

This table allows commands to be sent to configured LCR groups.

aluLcrCommandEntry row .1.3.6.1.4.1.6527.6.1.2.2.23.2.3.1

A conceptual row in the aluLcrCommandTable. This row exists only
if the associated aluLcrMdaConfigEntry is active.

Indexes

aluLcrConfigName aluLcrMdaConfigNumber

Column	Syntax	OID
aluLcrCommandSwitch Allows the initiation of an LCR switch command on the LCR group and member specified by the index values. When read this object returns the last command written. The last command written does not imply th…	Enumerationr/w Enumerated Values: 1 noCmd 2 clear 3 lockoutOfProtection 4 forcedSwitchWorkToProtect 5 forcedSwitchProtectToWork	.1.3.6.1.4.1.6527.6.1.2.2.23.2.3.1.1

This table provides status information about LCR groups
that have been configured on the system.

aluLcrStatusEntry row .1.3.6.1.4.1.6527.6.1.2.2.23.3.1.1

A conceptual row in the aluLcrStatusTable. This row exists only
if the associated aluLcrConfigEntry exists.

Indexes

No indexes recorded

Column	Syntax	OID
aluLcrStatusRequest The value of the current request and associated member. It is represented as a single octet. Bits are numbered from left to right. Bits 1-4 indicate the request. 1111 Lockout of Protection…	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.6527.6.1.2.2.23.3.1.1.1
aluLcrStatusSwitchedMda This field is set to the number of the MDA member that is currently switched to protection. The value 0 indicates no MDA is switched to protection. The value 1 indicates that the working MDA is switched to protection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.6.1.2.2.23.3.1.1.2
aluLcrStatusMcCtlLinkState The value of aluLcrStatusMcCtlLinkState indicates the current state of the Multi-Chassis (MC) LCR Group Control Link. Note that for a Single-Chassis LCR group the state is always up. The st…	Enumeration Enumerated Values: 0 up 1 downSignalingFailure 2 downIncompatibleNbr	.1.3.6.1.4.1.6527.6.1.2.2.23.3.1.1.3

This table contains status information for all MDA members that are
included in LCR groups.

aluLcrMdaStatusEntry row .1.3.6.1.4.1.6527.6.1.2.2.23.3.2.1

A conceptual row in the aluLcrMdaStatusTable. This row exists only
if the associated aluLcrMdaConfigEntry exists.

Indexes

No indexes recorded

Column	Syntax	OID
aluLcrMdaStatusCurrent Indicates the current state of the MDA. lockedOut This bit, when applied to a working member, indicates that the member is prevented from switching to the protection MDA. When applied to th…	Bits Enumerated Values: 0 lockedOut 1 sd 2 sf 3 switched 4 wtr	.1.3.6.1.4.1.6527.6.1.2.2.23.3.2.1.1
aluLcrMdaStatusSwitchovers When queried with index value aluLcrMdaConfigNumber other than 0, this object will return the number of times this working MDA has switched to the protection MDA. When queried with index value aluLcrMdaCo…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.6.1.2.2.23.3.2.1.2
aluLcrMdaStatusLastSwitchover When queried with index value aluLcrMdaConfigNumber other than 0, this object will return the value of sysUpTime when this working MDA last completed a switch to the protection MDA. If this member has never switched to …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.1.2.2.23.3.2.1.3
aluLcrMdaStatusSwitchoverSeconds The cumulative Protection Switching Duration (PSD) time in seconds. For the working MDA, this is the cumulative number of seconds that traffic was carried on the protection MDA. For the protection MDA, this is the cumul…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.6.1.2.2.23.3.2.1.4
aluLcrMdaStatusDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this member's counters suffered a discontinuity. The relevant counters are the specific instances associated with this member of any Counter…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.1.2.2.23.3.2.1.5