ALU-IEEE8021-CFM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
35
aluExtDot1agCfmMepTable
table
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1
·
1 row entry
·
14 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluExtDot1agCfmMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-IEEE8021-CFM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-IEEE8021-CFM-MIB::aluExtDot1agCfmMepTable'
Information about the Nokia 7705 SAR extensions to table tmnxDot1agCfmMepTable.
Information about the extensions of a particular CFM Mep
entry tmnxDot1agCfmMepEntry.
entry tmnxDot1agCfmMepEntry.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of aluExtDot1agCfmMepSingleLMMacAddress specifies the peer MAC address used
as a target for the Single-Ended Loss Measurement. Setting this object will trigger a Single-ended Loss Measurement te… |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.1 |
||||
|
The value of aluExtDot1agCfmMepSingleLMPriority specifies the priority used in
the generated test frame for the Single-Ended Loss Measurement test. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.2 |
||||
|
The value of aluExtDot1agCfmMepSingleLMCount specifies the number of frames with ETH-LM request
information to be sent to the peer MAC address for this Single-Ended Loss Measurement test |
Unsigned32r/w Constraints: range: 2-5 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.3 |
||||
|
The value of aluExtDot1agCfmMepSingleLMInterval specifies at what intervals
to transmit ETH-LM frames for the Single-Ended Loss Measurement test. Currently Nokia 7705 SAR devices only support 100 and 1000 milli-second i… |
millisecondsUnsigned32r/w Constraints: range: 100-100range: 1000-1000 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.4 |
||||
|
The value of aluExtDot1agCfmMepDualLMEnable specifies whether to enable or disable the
Dual-Ended Loss Measurement Test for the MEP. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.5 |
||||
|
aluExtDot1agCfmMepDualLMAlarmThreshold is the configuration of
an alarm threshold, in unit of hundredths of a percentage, for a trap is raised when either a result of aluDot1agCfmMepLmLossRatioLocal or aluDot1agCfmMepL… |
hundredth of a percentTLossRatioHundrethsOfPercentr/w Type Constraints: range: 0..10000 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.6 |
||||
|
Totoal number DMR sent to reply to valid DMM frames received.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.7 |
||||
|
Totoal number LMR sent to reply to valid LMM frames received.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.8 |
||||
|
aluExtDot1agCfmMepLbrOutNoTLVobsolete
Total number of Loopback Replies transmitted without TLV.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.9 |
||||
|
aluExtDot1agCfmMepLbrOutWithTLVobsolete
Total number of Loopback Replies transmitted with TLV.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.10 |
||||
|
aluExtDot1agCfmMepLbByMdaNum indicates the MDA that handles the incoming LBM's with no TLV's.
aluExtDot1agCfmMepLbByMdaNum is set to 0 when there isn't any MDA's programmed to respond to incoming LBM's |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.11 |
||||
|
After aluDot1agCfmMepLmAlarm trap is sent, if aluExtDot1agCfmMepLmAlarmClearThreshold
is non-zero, and both aluDot1agCfmMepLmLossRatioLocal and aluDot1agCfmMepLmLossRatioPeer are dropped to or below the configured aluE… |
hundredth of a percentTLossRatioHundrethsOfPercentr/w Type Constraints: range: 0..10000 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.12 |
||||
|
Number of Ethernet Loopback Replies transmitted by hardware in response to
valid Ethernet Loopback frames that either do not have any TLV's or have only one data TLV. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.13 |
||||
|
Total number of Ethernet Loopback Replies transmitted by software in response to
valid Ethernet Loopback frames that are not replied by harware. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.14 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2
·
1 row entry
·
21 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk aluDot1agCfmMepLossRsltTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-IEEE8021-CFM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-IEEE8021-CFM-MIB::aluDot1agCfmMepLossRsltTable'
The aluDot1agCfmMepLossRsltTable indicates the results of
all the Single-Ended/Dual-Ended Loss Tests, from one specific MEP to a
specific destination MAC address.
This table is not persistent over reboots of the chassis.
An entry in aluDot1agCfmMepLossRsltTable represents the latest result of a Y1731 Loss Measurement,
if the test was started. Each row stores the result for a either Single-Ended or Dual-Ended Loss test indicated
by alu…
if the test was started. Each row stores the result for a either Single-Ended or Dual-Ended Loss test indicated
by alu…
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of aluDot1agCfmMepLmMacAddr indicates the destination MAC address of the the test.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.1 |
||||
|
The value of aluDot1agCfmMepLmType indicates the type of the Y1731 Loss Measurement test,
either Single-ended or Dual-Ended. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.2 |
||||
|
The value of aluDot1agCfmMepLmEnableDuration is the accumulation of time,
expressed in seconds, during which the loss-test is enabled. For Single-Ended loss-tests, the value of aluDot1agCfmMepLmEnable… |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.3 |
||||
|
The Value of aluDot1agCfmMepLmChangeCount is the number of frames, either the received
ETH-LMR or CCM frames, that were used for the calculation of loss measurement results of this AluDot1agCfmMepLossRsltEntry row for … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.4 |
||||
|
aluDot1agCfmMepLmLatestChangeTime contains the sysUpTime at the most recently
writable variable in the AluDot1agCfmMepLossRsltEntry row was modified for this MEP. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.5 |
||||
|
The Value of aluDot1agCfmMepLmFramesRxLocal is the accumulated number of frames received
at the local service endpoint of this MEP, and within the loss test duration of aluDot1agCfmMepLmEnableDuration. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.6 |
||||
|
The Value of aluDot1agCfmMepLmFramesRxPeer is the accumulated number of frames received
at the far-end service endpoint associated with aluDot1agCfmMepLmMacAddr, and within the loss test duration of aluDot1agCfmMepLmEna… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.7 |
||||
|
The Value of aluDot1agCfmMepLmFramesTxLocal is the accumulated number of frames transmitted
at the local service endpoint of this MEP, and within the loss test duration of aluDot1agCfmMepLmEnableDuration. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.8 |
||||
|
The Value of aluDot1agCfmMepLmFramesTxPeer is the accumulated number of frames transmitted
at the far-end service endpoint associated with aluDot1agCfmMepLmMacAddr, and within the loss test duration of aluDot1agCfmMepLm… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.9 |
||||
|
The Value of aluDot1agCfmMepLmFramesLossLocal is the accumulated number of loss frames
at the local service endpoint of this MEP, and within the loss test duration of aluDot1agCfmMepLmEnableDuration. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.10 |
||||
|
The Value of aluDot1agCfmMepLmFramesLossPeer is the accumulated number of loss frames
at the far-end service endpoint associated with aluDot1agCfmMepLmMacAddr, and within the loss test duration of aluDot1agCfmMepLmEnabl… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.11 |
||||
|
The Value of aluDot1agCfmMepLmLossRatioLocal is the accumulated Loss Ratio, at the local
service endpoint of this MEP, and within the loss test duration of aluDot1agCfmMepLmEnableDuration. aluDot1agCfmMepLmLossRatioLoca… |
hundredth of a percentTLossRatioHundrethsOfPercent Type Constraints: range: 0..10000 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.12 |
||||
|
The Value of aluDot1agCfmMepLmLossRatioPeer is the accumulated Loss Ratio, at
the far-end service endpoint associated with aluDot1agCfmMepLmMacAddr, and within the loss test duration of aluDot1agCfmMepLmEnableDuration… |
hundredth of a percentTLossRatioHundrethsOfPercent Type Constraints: range: 0..10000 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.13 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmPrevTxLocal is the value of TxFCf
in the second latest ETH-LMR frame this local MEP has received. If aluDot1agCfmMepLmType is dualEndedLm, then… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.14 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmPrevRxLocal is the counter of frames
received at the service end point of this local MEP at the time the second latest ETH-LMR frame is received and being pro… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.15 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmPrevTxPeer is the value of TxFCb
in the second latest ETH-LMR frame this local MEP has received. If aluDot1agCfmMepLmType is dualEndedLm, then … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.16 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmPrevRxPeer is the value of 'RxFCf'
in the second latest ETH-LMR frame this local MEP has received. If aluDot1agCfmMepLmType is dualEndedLm, the… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.17 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmCurrTxLocal is the value of 'TxFCf'
in the latest ETH-LMR frame this local MEP has received. If aluDot1agCfmMepLmType is dualEndedLm, then aluD… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.18 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmCurrRxLocal is the counter of frames
received at the service end point of this local MEP at the time the latest ETH-LMR frame is received and being processed.… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.19 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmCurrTxPeer is the value of 'TxFCb'
in the lastest ETH-LMR frame this local MEP has received. If aluDot1agCfmMepLmType is dualEndedLm, then aluD… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.20 |
||||
|
If aluDot1agCfmMepLmType is singleEndedLm, aluDot1agCfmMepLmCurrRxPeer is the value of 'RxFCf'
in the latest ETH-LMR frame this local MEP has received. If aluDot1agCfmMepLmType is dualEndedLm, then aluDo… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.6.1.2.2.10.1.2.1.21 |