ALU-DISCOVERY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
14
.1.3.6.1.4.1.6527.3.3.2.4.1 · 1 row entry · 14 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluDiscoveryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-DISCOVERY-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-DISCOVERY-MIB::aluDiscoveryTable'
The aluDiscoveryTable has one entry for the system.
aluDiscoveryEntry row .1.3.6.1.4.1.6527.3.3.2.4.1.1
This table contains the runtime information of auto-discovery
of this system. The information contained in this table is since
last system boot.
Column Syntax OID
aluDiscoveryStatus specifies the current status of the Auto-Discovery Agent.

If aluDiscoveryStatus is 'terminated' or 'halted' the aluDiscoveryFailureFlags
object can be used for more detail.
AluDiscoveryStatus
Type Values:
0noAutoDiscovery
1inProgress
2halted
4terminated
5successful
.1.3.6.1.4.1.6527.3.3.2.4.1.1.1
aluDiscoveryStage specifies the current stage of the Auto-Discovery Agent if
it is currently running.
AluDiscoveryStage
Type Values:
0unknown
1selfDiscovery
2aquiringNetwork
3aquiringConfig
4testAndCommitConfig
.1.3.6.1.4.1.6527.3.3.2.4.1.1.2
aluDiscoveryStartTime specifies the last time the Auto-Discovery Agent was
started since the last system boot.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.3.2.4.1.1.3
aluDiscoveryEndTime specifies the last time the Auto-Discovery Agent ended
since the last system boot. The end-time will be updated regardless of if the
auto-discovery was successful or not.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.3.2.4.1.1.4
aluDiscoverySystemIpAddr specifies the discovered system loopback ip-address
of the base router.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.3.2.4.1.1.5
aluDiscoverySystemSubnet specifies the discovered system loopback subnet mask
of the base router.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.3.2.4.1.1.6
aluDiscoveryLocalCircId describes the local selected network uplink interface
used for auto-discovery of this system.
AluDiscoveryCircuitId .1.3.6.1.4.1.6527.3.3.2.4.1.1.7
aluDiscoveryLocalIpAddr describes the discovered ip-address of the selected
network uplink interface used for auto-discovery of this system.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.3.2.4.1.1.8
aluDiscoveryLocalSubnet describes the discovered subnet mask of the selected
network uplink interface used for auto-discovery of this system.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.3.2.4.1.1.9
aluDiscoveryGatewayCircId describes the discovered gateway into the network
used for auto-discovery of this system.
AluDiscoveryCircuitId .1.3.6.1.4.1.6527.3.3.2.4.1.1.10
aluDiscoveryGatewayRemId describes the remote-id of the gateway into the network
used for auto-discovery of this system.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6527.3.3.2.4.1.1.11
aluDiscoveryGatewayIpAddr describes the ip-address of the gateway into the network
used for auto-discovery of this system.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.3.2.4.1.1.12
aluDiscoveryServerIpAddr describes the selected DHCP server that provided configuration
information during auto-discovery of this system.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.3.2.4.1.1.13
aluDiscoveryFailureFlags specifies the failure reasons that auto-discovery can not be
completed successfully.
AluDiscoveryFailureFlags
Type Values:
0configConflict
1eqNotReady
2noPortsReady
3noNetworkFound
4ipRequestFailed
5portSelectFailed
6configLoadingProblem
7configTestingFailed
8configCommitProblem
.1.3.6.1.4.1.6527.3.3.2.4.1.1.14