Standard view Table view

ALTIGA-SSH-STATS-MIB

        The Altiga SSH Statistics MIB models counters and objects that are
of management interest for SSH.
        
Acronyms
The following acronyms are used in this document:
        
  MIB:        Management Information Base
        
  SSH:        Secure Shell
Source file
ALTIGA-SSH-STATS-MIB
Last revised
Identity
altigaSshStatsMibModule
Base OID
1.3.6.1.4.1.3076.1.1.40.2
Imported Objects
ALTIGA-GLOBAL-REG alSshMibModule
ALTIGA-MIB alSshGroup alStatsSsh
ALTIGA-SESSION-STATS-MIB EncryptionAlgorithm
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TC DisplayString
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALTIGA-SSH-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALTIGA-SSH-STATS-MIB::altigaSshStatsMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTIGA-SSH-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTIGA-SSH-STATS-MIB::altigaSshStatsMibModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (24)
altigaSshStatsMibModule
.1.3.6.1.4.1.3076.1.1.40.2
altigaSshStatsMibConformance
.1.3.6.1.4.1.3076.1.1.40.2.1
altigaSshStatsMibCompliances
.1.3.6.1.4.1.3076.1.1.40.2.1.1
alStatsSshGlobal
.1.3.6.1.4.1.3076.2.1.2.35.1
alSshStatsOctetsSent
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.1.1
alSshStatsOctetsRcvd
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.1.2
alSshStatsPacketsSent
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.1.3
alSshStatsPacketsRcvd
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.1.4
alSshStatsTotalSessions
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.1.5
alSshStatsActiveSessions
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.3076.2.1.2.35.1.6
alSshStatsMaxSessions
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.1.7
alSshStatsSessionTable
.1.3.6.1.4.1.3076.2.1.2.35.2
alSshStatsSessionEntry
alSshStatsSessionIndex
 .1.3.6.1.4.1.3076.2.1.2.35.2.1
alSshStatsSessionIndex
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.1
alSshStatsSessionPacketsSent
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.10
alSshStatsSessionPacketsRcvd
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.11
alSshStatsSessionName
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.2
alSshStatsSessionIpAddr
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.3
alSshStatsSessionPort
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.4
alSshStatsSessionStartTime
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.5
alSshStatsSessionLoginTime
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.6
alSshStatsSessionEncr
ALTIGA-SESSION-STATS-MIBEncryptionAlgorithm
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.7
alSshStatsSessionOctetsSent
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.8
alSshStatsSessionOctetsRcvd
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.35.2.1.9
Conformance Groups (1)
altigaSshStatsGroup
alSshStatsOctetsSent alSshStatsOctetsRcvd alSshStatsPacketsSent alSshStatsPacketsRcvd alSshStatsTotalSessions alSshStatsActiveSessions alSshStatsMaxSessions alSshStatsSessionIndex alSshStatsSessionName alSshStatsSessionIpAddr alSshStatsSessionPort alSshStatsSessionStartTime alSshStatsSessionLoginTime alSshStatsSessionEncr alSshStatsSessionOctetsSent alSshStatsSessionOctetsRcvd alSshStatsSessionPacketsSent alSshStatsSessionPacketsRcvd
The objects for SSH statistics.
 .1.3.6.1.4.1.3076.2.1.1.1.35.2
Compliance Statements (1)

OID .1.3.6.1.4.1.3076.1.1.40.2.1.1.1
The compliance statement for agents which
implement the Altiga SSH Statistics MIB.
Required groups
mandatory altigaSshStatsGroup